Search NASA⌕ Search

SEARCH · Search NASA

Results for “MAGNETRON SPUTTERING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,639 records · Page 91

Electronic transport in heavily doped Ag/n-Si composite films

Hall measurements characterized Ag/n-Si composite films 1 micron thick produced by magnetron co-sputtering onto high resistivity Si (111) substrates at 550°C. The targets were Ag and n-type Si doped with 3 × 10{sup 19}/cm{sup 3} of antimony. Films were prepared with 13, 16 and 22 at. % Ag and measured over a temperature range 77–500°K. Conduction takes place at low temperatures by variable rang hopping in localized states at the Fermi level and by thermal activation over grain boundaries at higher temperatures. The Log Resistivity vs 1/kT curves for the three Ag concentrations vary in a similar manner, but decrease in magnitude with increasing Ag due to the smaller number of grain boundaries between Ag nanoparticles occurring with increasing Ag concentration. At low temperatures Hall mobilities are essentially independent of temperature as the carrier densities for the three Ag concentrations are constant from 77 to slightly under 300°K with resistivities varying by small amounts. The mobilities at all Ag concentrations increase with temperature and approach each other as the effects of grain boundaries become less important. This work presents for the first time the effects of metal particles embedded in a semiconductor on the transport properties of carriers in the semiconductor. Though these effects are for a given average particle size most of the results are expected to hold over a range of particle sizes. Free electrons produced in films containing 13 and 16 at. % Ag result in concentrations of 1.5 × 10{sup 19}/cm{sup 3}, one half the antimony doping, while those with 22 at. % Ag, the carrier concentrations are three orders of magnitude higher. These constant carrier concentrations are due to the metal-insulator transition that occurs in doped crystalline and polycrystalline silicon for carrier densities n{sub c} >3.9 × 10{sup 18}/cm{sup 3}. The three orders of magnitude higher carrier concentration produced in films with 22 at. % Ag is argued to be due to doping of the Si matrix by the Ag nanoparticles at this concentration, a doping effect previously observed in ErAs in InGaAs. A discussion of this doping effect is presented that is in keeping with the experimental observations though other factors such as particle size effects need further experimental confirmation. Thermal activation energies and grain boundary barrier heights were obtained from resistivity and Hall mobility data. The barrier heights of 0.360, 0.390 and 0.470 eV measured for films with Ag concentrations of 13, 16 and 22 at. % Ag respectively, are quite high compared to those obtained by other methods used for producing polycrystalline Si (10-100 mev) and need to be considerably reduced in order to increase the efficiency of the detectors for which these Ag/n-Si composite films will be used. Thermal annealing of as-deposited films is suggested as one means to accomplish this result.

36 MATERIALS SCIENCE↗

Combinatorial Synthesis and High-Throughput Characterization of Microstructure and Phase Transformation in Ni–Ti–Cu–V Quaternary Thin-Film Library

Ni–Ti–based shape memory alloys (SMAs) have found widespread use in the last 70 years, but improving their functional stability remains a key quest for more robust and advanced applications. Named for their ability to retain their processed shape as a result of a reversible martensitic transformation, SMAs are highly sensitive to compositional variations. Alloying with ternary and quaternary elements to fine-tune the lattice parameters and the thermal hysteresis of an SMA, therefore, becomes a challenge in materials exploration. Combinatorial materials science allows streamlining of the synthesis process and data management from multiple characterization techniques. In this study, a composition spread of Ni–Ti–Cu–V thin-film library was synthesized by magnetron co-sputtering on a thermally oxidized Si wafer. Composition-dependent phase transformation temperature and microstructure were investigated and determined using high-throughput wavelength dispersive spectroscopy, synchrotron X-ray diffraction, and temperature-dependent resistance measurements. Of the 177 compositions in the materials library, 32 were observed to have shape memory effect, of which five had zero or near-zero thermal hysteresis. These compositions provide flexibility in the operating temperature regimes that they can be used in. A phase map for the quaternary system and correlations of functional properties are discussed with respect to the local microstructure and composition of the thin-film library.

42 ENGINEERING↗

High-throughput characterization of Ag–V–O nanostructured thin-film materials libraries for photoelectrochemical solar water splitting

Ag–V–O thin-film materials libraries, with both composition (Ag 22-77 V 23-78 O x ) and thickness (123–714 nm) gradients were fabricated using combinatorial reactive magnetron co-sputtering aiming on establishing relations between composition, structure, and functional properties. As-deposited libraries were annealed in air at 300 °C for 10 h. High-throughput characterization methods of composition, structure and functional properties were used to identify photoelectrochemically active regions. The phases AgV 6 O 15 , Ag 2 V 4 O 11 , AgVO 3 , and Ag 4 V 2 O 7 were observed throughout the composition gradient. The photoelectrochemical properties of Ag–V–O films are dependent on composition and morphology. An enhanced photocurrent density (~300–554 μA/cm 2 ) was obtained at 30 to 45 at.% Ag along the thickness gradient. Thin films of these compositions show a nanowire morphology, which is an important factor for the enhancement of photoelectrochemical performance. The photoelectrochemically active regions were further investigated by high-throughput synchrotron-X-ray diffraction and transmission electron microscopy (Ag 32 V 68 O x ) which confirmed the presence of Ag 2 V 4 O 11 as the dominating phase along with the minor phases AgV 6 O 15 and AgVO 3 . This enhanced photoactive region shows bandgap values of ~2.30 eV for the direct and ~1.87 eV for the indirect bandgap energies. Finally, the porous nanostructured films improve charge transport and are hence of interest for photoelectrochemical water splitting.

36 MATERIALS SCIENCE↗

Electrochromic performance of nanocomposite nickel oxide counter electrodes containing lithium and zirconium

Nickel oxide materials are suitable for counter electrodes in complementary electrochromic devices. The state-of-the-art nickel oxide counter electrode materials are typically prepared with multiple additives to enhance peformance. Herein, nanocomposite nickel oxide counter electrodes were fabricated via RF magnetron co-sputtering from Ni-Zr alloy and Li2O ceramic targets. The as-deposited nanocomposite counter electrodes were characterized with inductively coupled plasma mass spectrometry (ICP-MS), scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM), X-ray diffraction (XRD), and X-ray absorption spectroscopy (XAS). It was found that the stoichiometry, crystal structure and electronic structure of the nickel oxide-based materials could be readily tuned by varying the Li2O sputter deposition power level. Comprehensive electrochromic evaluation demonstrated that the performance of the nickel oxide-based materials was dependent on the overall Li stoichiometry. Overall, the nanocomposite nickel oxide counter electrode containing lithium and zirconium synthesized with a Li2O deposition power of 45 W exhibited the optimal performance with an optical modulation of 71% and coloration efficiency of 30 cm2/C at 670 nm in Li-ion electrolyte.

36 MATERIALS SCIENCE↗

Self-regulated growth and tunable properties of CuSbS 2 solar absorbers

Polycrystalline thin film copper chalcogenide solar cells show remarkable efficiencies, and analogous but less-explored semiconducting materials may hold similar promise. With consideration of elemental abundance and process scalability, we explore the potential of the Cu–Sb–S material system for photovoltaic applications. Using a high-throughput combinatorial approach, Cu–Sb–S libraries were synthesized by magnetron co-sputtering of Cu 2 S and Sb 2 S 3 targets and evaluated by a suite of spatially resolved characterization techniques. The resulting compounds include Cu 1.8 S (digenite), Cu 12 Sb 4 S 13 (tetrahedrite), CuSbS 2 (chalcostibite), and Sb 2 S 3 (stibnite). Of the two ternary phases synthesized, CuSbS 2 was found to have the most potential, however, when deposited at low temperatures its electrical conductivity varied by several orders of magnitude due to the presence of impurities. To address this issue, we developed a self-regulated approach to synthesize stoichiometric CuSbS 2 films using excess Sb 2 S 3 vapor at elevated substrate temperatures. Theoretical calculations explain that phase-pure CuSbS2 is expected to be formed over a relatively wide range of temperatures and pressures, bound by the sublimation of Sb2S3 and decomposition of CuSbS2. The carrier concentration of CuSbS 2 films produced within this regime was tunable from 10 16 – 10 18 cm –3 through appropriate control of Sb 2 S 3 flux rate and substrate temperature. CuSbS 2 displayed a sharp optical absorption onset indicative of a direct transition at 1.5 eV and an absorption coefficient of 10 5 cm −1 within 0.3 eV of the onset. Furthermore, the results of this study suggest that CuSbS 2 holds promise for solar energy conversion due to its tolerant processing window, tunable carrier concentration, solar-matched band gap, and high absorption coefficient.

14 SOLAR ENERGY↗

Tungsten Incorporation into Gallium Oxide: Crystal Structure, Surface and Interface Chemistry, Thermal Stability and Interdiffusion

Tungsten (W) incorporated gallium oxide (Ga2O3) (GWO) thin films were deposited by radio-frequency magnetron co-sputtering of W-metal and Ga2O3-ceramic targets. Films were produced by varying sputtering power applied to the W-target in order to achieve variable W-content (0-12 at%) into Ga2O3 while substrate temperature was kept constant at 500 °C. Chemical composition, chemical valence states, microstructure and crystal structure of as-deposited and annealed GWO films were evaluated as a function of W-content. The structural and chemical analyses indicate that the samples deposited without any W-incorporation are stoichiometric, nanocrystalline Ga2O3 films, which crystallize in β-phase monoclinic structure. While GWO films also crystallize in monoclinic β-Ga2O3 phase, W-incorporation induces surface amorphization as revealed by structural studies. The chemical valence state of Ga ions probed by X-ray photoelectron spectroscopic (XPS) analyses is characterized by the highest oxidation state i.e., Ga3+. No changes in Ga chemical state are noted for variable W-incorporation in the range of 0-12 at%. Rutherford backscattering spectrometry (RBS) analyses indicate the uniform distribution of W-content in the GWO films. However, XPS analyses indicate the formation of mixed valence states for W ions, which may be responsible for surface amorphization in GWO films. GWO films were stable up to 900 oC, at which point thermally induced secondary phase (W-oxide) formation was observed. A transition to mesoporous structure coupled with W interdiffusion occurs due to thermal annealing as derived from the chemical analyses at the GWO films’ surface as well as depth-profiling towards the GWO-Si interface. A model has been formulated to account for the mechanism of W-incorporation, thermal stability and interdiffusion via pore formation in GWO films.

Chemical composition↗

WO 3 /CuWO 4 Ratio Controls Open-Circuit Photovoltage and Photocurrent in Type II Heterojunction Solar Fuel Photoelectrodes

WO 3 /CuWO 4 photoelectrodes for the oxygen evolution reaction benefit from a type II heterojunction for charge separation. However, the impact of the WO 3 /CuWO 4 ratio on the photocurrent and the photovoltage is not clear. To probe the effect of composition, Cu x W 1-x O y thin films with variable W:Cu ratio were prepared on FTO by reactive magnetron co-sputtering of W and Cu, followed by air annealing at 500ºC. EDS, XRD, Rietveld refinement, and Raman spectroscopy confirm the presence of crystalline WO 3 and CuWO 4 in the W rich films and increasing amounts of amorphous copper oxides in the Cu rich films. Bandgaps were determined by optical absorption spectroscopy, surface photovoltage spectroscopy (SPS), and photoaction spectra and are found to decrease from 2.7 eV to 1.2 eV with increasing copper oxide content. SPS reveals n-type semiconductor photoanode behavior for WO 3 /CuWO 4 samples and p-type photocathode behavior for CuO x rich films. Photoelectrochemical experiments confirm stable water oxidation with Faraday efficiency near unity for all W rich films and photocurrents that are increasing with CuWO 4 content. Optimal performance is seen for WO 3 /CuWO 4 mixed phases containing 47-75 mass% CuWO 4 . These compositions maximize charge separation at the type II heterojunction interface between the two materials. Additionally, according to incident photon to current efficiency (IPCE) data, the WO 3 improves photon conversion below 350 nm, while CuWO 4 improves conversion at 450-525 nm. Overall, this work shows for the first time how the WO 3 /CuWO 4 ratio controls the photovoltage and the photocurrent in type II heterojunction solar fuel photoelectrodes, and how copper oxides in the copper rich films severely degrade the performance. Furthermore, these results are useful in the context of bulk-heterojunction electrodes for the conversion of solar energy into fuels.

CuWO4↗

Combinatorial Exploration and Mapping of Phase Transformation in a Ni–Ti–Co Thin Film Library

Combinatorial synthesis and high-throughput characterization of a Ni–Ti–Co thin film materials library are reported for exploration of reversible martensitic transformation. The library was prepared by magnetron co-sputtering, annealed in vacuum at 500 °C without atmospheric exposure, and evaluated for shape memory behavior as an indicator of transformation. Composition, structure, and transformation behavior of the 177 pads in the library were characterized using high-throughput wavelength dispersive spectroscopy (WDS), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), and four-point probe temperature-dependent resistance (R(T)) measurements. A new, expanded composition space having phase transformation with low thermal hysteresis and Co > 10 at. % is found. Unsupervised machine learning methods of hierarchical clustering were employed to streamline data processing of the large XRD and XPS data sets. Through cluster analysis of XRD data, we identified and mapped the constituent structural phases. Finally, composition–structure–property maps for the ternary system are made to correlate the functional properties to the local microstructure and composition of the Ni–Ti–Co thin film library.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thin Dielectric Films Containing Tb{sup 3+} Ions For Application In Thin Film Solar Cells

Thin transparent dielectric films containing Tb{sup 3+} are developed for application as spectral converters of the solar spectrum in thin film silicon solar cells. The results on the deposition and characterization of thin SiO{sub 2} and Al{sub 2}O{sub 3} films containing Tb{sup 3+} ions are presented. The films are prepared by RF magnetron co-sputtering, a well established technique for large area coatings. Photoluminescence (PL) is measured at room temperature, using the 488 nm line of an Ar laser and a nitrogen-cooled CCD camera attached to a monochromator. The dependence of the PL intensity on the concentration of Tb in the film is studied. It is found that the intensity exhibits a maximum at about 1 at.%. Annealing studies are performed on SiO{sub 2}:Tb with two different methods to improve the PL intensity. In both regimes of annealing, the best results for thin SiO{sub 2}:Tb films are obtained in the temperature range of 650-700 deg. C. After treatment at this temperature the Tb PL increases 2.5-3 times.

36 MATERIALS SCIENCE↗

Faraday effect in ZnO:Mn thin films

Undoped and Mn-doped ZnO transparent thin films were grown by RF magnetron co-sputtering. The films are nanocrystalline, with wurtzite-structure grains of a typical size of 20 nm, with a preferential orientation of the c-axis perpendicular to the surface. Although, according to the Raman spectroscopy data, Mn mostly substitutes Zn in the lattice sites, factor that is considered favorable for ferromagnetism in this material, the ZnO:Mn films are paramagnetic at room temperature as it follows from our Faraday effect (FE) measurements. The FE spectra show a significant influence of the Mn ions for photon energies sufficiently below the ZnO:Mn band gap but not in its vicinity.

36 MATERIALS SCIENCE↗

Temperature dependence of magnetotransport behavior and its correlation with inter-particle interaction in Cu{sub 100-x}Co{sub x} granular films

Granular Cu{sub 100-x}Co{sub x} (x=15.1-30.9) films were deposited by magnetron co-sputtering and their magnetotransport properties were investigated as a function of temperature. We observed that with increasing cobalt content the room temperature magnetoresistance (MR) shows a maximum at x=20.9. With decreasing temperature, it is observed that the cobalt concentration at which the maximum MR occurs shifts progressively towards lower Co concentration. This behavior has been discussed in terms of the inter-particle magnetic interactions.

36 MATERIALS SCIENCE↗

Magneto-optical spectroscopy of Co{sub 2}FeSi Heusler compound

Magneto-optical and electronic properties of the Co{sub 2}FeSi Heusler compound were studied by polar Kerr magneto-optical spectroscopy and ab-initio calculations. The thin-film samples were grown by dc/rf magnetron co-sputtering on MgO(100) substrates. A Cr seed layer was deposited prior to the Co{sub 2}FeSi layer to achieve its epitaxial growth. The magneto-optical spectroscopy was carried out using generalized magneto-optical ellipsometry with rotating analyzer in the photon energy range from 1.4 to 5.5 eV with an applied magnetic field of up to 1.2 T. The polar Kerr spectra showed a smooth spectral behavior up to 5.5 eV indicating nearly free charge carriers. Experimental data were compared with ab-initio calculations based on density functional theory employing the full-potential linearized augmented plane wave method.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Influence of Bi on the Er luminescence in yttrium-erbium disilicate thin films

The influence of bismuth on erbium optical properties at 1.54 μm has been investigated in yttrium-erbium disilicate thin films synthesized by magnetron co-sputtering and implanted with two Bi different doses. The Bi depth distribution and the evolution of its oxidation states after annealing treatments at 1000 °C in two atmospheres, O₂ and N₂, have been investigated. It was found that only in O₂ the Bi³⁺ valence state is prevalent, thanks to the enhanced Bi mobility in the oxidizing ambient, as demonstrated by Rutherford backscattering spectrometry. At lower Bi content, although the formation of Bi⁰ metallic nanoparticles that are deleterious non radiative channels for Er luminescence, efficient energy transfer from Bi to Er has been obtained only in O₂. It is due to the excitation of ultraviolet broad Bi₃⁺ absorption band and the energy transfer to Er ions. We have evaluated that in this case, Er effective excitation cross section increased by a factor of 5 in respect with the one for direct Er absorption at 488 nm. At higher Bi dose, this mechanism is absent, but an increased Er optical efficiency at 1.54 μm has been observed under resonant excitation. It is due to the contribution of a fraction of Er ions having an increased lifetime. This phenomenon is associated with the formation of Bi agglomerates, induced at higher Bi doses, which well isolate Er from non-radiative quenching centers. The increased decay time assures higher optical efficiency at 1.54 μm.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Silicon quantum dots in SiO{sub x} dielectrics as energy selective contacts in hot carrier solar cells

Thin films of c-Si QDs embedded in a-SiO{sub x} dielectric matrix was achieved at a low temperature ∼400°C, from one step process by reactive rf magnetron co-sputtering of c-Si wafer and pure SiO{sub 2} targets, in the (H{sub 2}+Ar)- plasma. Formation of a double-barrier structure has been primarily identified from the SAX data and exclusively confirmed from the resonant tunneling current appearing in the J-E characteristic curve peaks, determined by the discrete energy levels of c-Si QDs, at which it could be used as energy selective contacts in hot carrier solar cells.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Optical and electron transport properties of rock-salt Sc{sub 1−x}Al{sub x}N

Epitaxial single-crystal Sc{sub 1−x}Al{sub x}N ternary alloy layers deposited by magnetron co-sputtering on MgO(001) substrates at 950 °C exhibit a solid solution rock-salt phase for x = 0–0.2 without decomposition. Optical absorption indicates a linear increase in the optical gap from 2.51 eV for ScN to 3.05 eV for Sc{sub 0.8}Al{sub 0.2}N and, after correction due to the Moss-Burstein shift, a direct X point interband transition energy E{sub g}(X) = 2.15 + 2.75 x (eV). Correspondingly, the direct transition at the zone center increases with Al concentration according to E{sub g}(Γ) = 3.80 + 1.45 x (eV), as determined from a feature in the reflection spectra. All layers are degenerate n-type semiconductors with a room temperature mobility that decreases from 22 to 6.7 to 0.83 cm{sup 2}/V s as x increases from 0 to 0.11 to 0.20. The corresponding carrier densities are 9.2 × 10{sup 20}, 7.9 × 10{sup 20}, and 0.95 × 10{sup 20 }cm{sup −3} as determined from Hall measurements and consistent with optical free carrier absorption below photon energies of 1 eV. Temperature dependent transport measurements indicate metallic conduction for ScN, but weak localization that leads to a resistivity minimum at 85 and 210 K for x = 0.051 and 0.15, respectively, and a negative temperature coefficient over the entire measured 4–300 K range for Sc{sub 0.8}Al{sub 0.2}N. The decreasing mobility is attributed to alloy scattering at randomly distributed Al atoms on cation sites, which also cause the weak localization. The carrier density is primarily due to unintentional F doping from the Sc target and decreases strongly for x > 0.15, which is attributed to trapping in defect states due to the deterioration of the crystalline quality, as evidenced by the x-ray diffraction peak width that exhibits a minimum of 0.14° for x = 0.11 but increases to 0.49° for x = 0.20. This is consistent with asymmetric x-ray diffraction analyses, indicating a relaxed lattice constant that decreases from 4.511 ± 0.005 to 4.411 ± 0.004 Å for x = 0–0.2, and a biaxial in-plane compressive strain that decreases from −1.1% to −0.2% as x increases from 0 to 0.11, which is attributed to the higher Al adatom mobility, but increases again to −1.8% for x = 0.20, as x approaches the critical composition for phase separation, which causes structural instability and a higher defect density.

36 MATERIALS SCIENCE↗

Effect of indium low doping in ZnO based TFTs on electrical parameters and bias stress stability

Some applications of thin film transistors (TFTs) need the bottom-gate architecture and unpassivated channel backside. We propose a simple routine to fabricate indium doped ZnO-based TFT with satisfactory characteristics and acceptable stability against a bias stress in ambient room air. To this end, a channel layer of 15 nm in thickness was deposited on cold substrate by DC reactive magnetron co-sputtering of metal Zn-In target. It is demonstrated that the increase of In concentration in ZnO matrix up to 5% leads to negative threshold voltage (V{sub T}) shift and an increase of field effect mobility (μ) and a decrease of subthreshold swing (SS). When dopant concentration reaches the upper level of 5% the best TFT parameters are achieved such as V{sub T} = 3.6 V, μ = 15.2 cm{sup 2}/V s, SS = 0.5 V/dec. The TFTs operate in enhancement mode exhibiting high turn on/turn off current ratio more than 10{sup 6}. It is shown that the oxidative post-fabrication annealing at 250{sup o}C in pure oxygen and next ageing in dry air for several hours provide highly stable operational characteristics under negative and positive bias stresses despite open channel backside. A possible cause of this effect is discussed.

36 MATERIALS SCIENCE↗

The confinement of phonon propagation in TiAlN/Ag multilayer coatings with anomalously low heat conductivity

TiAlN/Ag multilayer coatings with a different number of bilayers and thicknesses of individual layers were fabricated by DC magnetron co-sputtering. Thermal conductivity was measured in dependence of Ag layer thickness. It was found anomalous low thermal conductivity of silver comparing to TiAlN and Ag bulk standards and TiAlN/TiN multilayers. The physical nature of such thermal barrier properties of the multilayer coatings was explained on the basis of reflection electron energy loss spectroscopy. The analysis shows that nanostructuring of the coating decreases the density of states and velocity of acoustic phonons propagation. At the same time, multiphonon channels of heat propagation degenerate. These results demonstrate that metal-dielectric interfaces in TiAlN/Ag coatings are insurmountable obstacles for acoustic phonons propagation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Exploring Structural Anisotropy in Amorphous Tb-Co via Changes in Medium-Range Ordering

Amorphous thin films grown by magnetron co-sputtering exhibit changes in atomic structure with varying growth and annealing temperatures. Structural variations influence the bulk properties of the films. Scanning nanodiffraction performed in a transmission electron microscope (TEM) is applied to amorphous Tb 17 Co 83 (a-Tb-Co) films deposited over a range of temperatures to measure relative changes in medium-range ordering (MRO). These measurements reveal an increase in MRO with higher growth temperatures and a decrease in MRO with higher annealing temperatures. The trend in MRO indicates a relationship between the growth conditions and local atomic ordering. By tilting select films, the TEM measures variations in the local atomic structure as a function of orientation within the films. The findings support claims that preferential ordering along the growth direction results from temperature-mediated adatom configurations during deposition, and that oriented MRO correlates with increased structural anisotropy, explaining the strong growth-induced perpendicular magnetic anisotropy found in rare earth–transition metal films. Beyond magnetic films, we propose the tilted FEM workflow as a method of extracting anisotropic structural information in a variety of amorphous materials with directionally dependent bulk properties, such as films with inherent bonding asymmetry grown by physical vapor deposition.

36 MATERIALS SCIENCE↗