SEARCH · Search NASA

Results for “MAGNETS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,639 records · Page 91

All sources NASA NTRS DOE OSTI

DOE OSTI2024

Quantum magnetism in the frustrated square lattice oxyhalides YbBi 2 IO 4 and YbBi 2 ClO 4

Square-lattice systems offer a direct route for realizing two-dimensional (2D) quantum magnetism with frustration induced by competing interactions. In this work, the square lattice materials YbBi 2 IO 4 and YbBi 2 ClO 4 were investigated using a combination of magnetization and specific-heat measurements on polycrystalline samples. Specific-heat measurements provide evidence for long-range magnetic order below $T$ N = 0.21 K (0.25 K) for YbBi 2 IO 4 (YbBi 2 ClO 4 ). On the other hand, a rather broad maximum is found in the temperature-dependent magnetic susceptibility, located at $T$ max = 0.33 K (0.38 K) in YbBi 2 IO 4 (YbBi 2 ClO 4 ), consistent with the quasi-2D magnetism expected for the large separation between the magnetic layers. Estimation of the magnetic entropy supports the expected Kramers' doublet ground state for Yb 3+ and the observed paramagnetic behavior is consistent with a well-isolated doublet. Roughly two-thirds of the entropy is consumed above $T$ N , due to a combination of the quasi-2D behavior and magnetic frustration. The impact of frustration is examined from the viewpoint of a simplified $J$ 1 -$J$ 2 square lattice model, which is frustrated for antiferromagnetic interactions. Specifically, a high-temperature series expansion analysis of the temperature-dependent specific-heat and magnetization data yields $J$ 2 /$J$ 1 = 0.30 (=0.23) for YbBi 2 IO 4 (YbBi 2 ClO 4 ). In conclusion, this simplified analysis suggests strong frustration that should promote significant quantum fluctuations in these compounds, and thus motivates future work on the static and dynamic magnetic properties of these materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2016

Short- and long-range magnetic order in LaMnAsO

The magnetic properties of the layered oxypnictide LaMnAsO have been revisited using neutron scattering and magnetization measurements. The present measurements identify the Néel temperature T N = 360(1) K. Below T N the critical exponent describing the magnetic order parameter is β=0.33–0.35 , consistent with a three-dimensional Heisenberg model. Above this temperature, diffuse magnetic scattering indicative of short-range magnetic order is observed, and this scattering persists up to T SRO = 650(10) K. Morevoer, the magnetic susceptibility shows a weak anomaly at T SRO and no anomaly at T N . Analysis of the diffuse scattering data using a reverse Monte Carlo algorithm indicates that above T N nearly two-dimensional, short-range magnetic order is present with a correlation length of 9.3(3) Å within the Mn layers at 400 K. The inelastic scattering data reveal a spin gap of 3.5 meV in the long-range ordered state, and strong, low-energy (quasielastic) magnetic excitations emerging in the short-range ordered state. When we compared it with other related compounds correlates the distortion of the Mn coordination tetrahedra to the sign of the magnetic exchange along the layer-stacking direction, and suggests that short-range order above T N is a common feature in the magnetic behavior of layered Mn-based pnictides and oxypnictides.

74 ATOMIC AND MOLECULAR PHYSICS↗

DOE OSTI2019

Magnetic Eddy Viscosity of Mean Sheared Flows in Two-Dimensional Magnetohydrodynamics

Magnetic induction in magnetohydrodynamic fluids at magnetic Reynolds number (Rm) less than 1 has long been known to cause magnetic drag. Here we show that when Rm $\gg 1$ and the fluid is in a hydrodynamic-dominated regime in which the magnetic energy is much smaller than the kinetic energy, induction due to a mean shear flow leads to a magnetic eddy viscosity. The magnetic viscosity is derived from simple physical arguments, where a coherent response due to shear flow builds up in the magnetic field until decorrelated by turbulent motion. The dynamic viscosity coefficient is approximately $(B^2_p/2_{μ_0}) τ_{corr}$, the poloidal magnetic energy density multiplied by the correlation time. We confirm the magnetic eddy viscosity through numerical simulations of two-dimensional incompressible magnetohydrodynamics. We also consider the three-dimensional case, and in cylindrical or spherical geometry, theoretical considerations similarly point to a nonzero viscosity whenever there is differential rotation. Hence, these results serve as a dynamical generalization of Ferraro's law of isorotation. The magnetic eddy viscosity leads to transport of angular momentum and may be of importance to zonal flows in astrophysical domains such as the interior of some gas giants.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2017

Magnetic behavior and spin-lattice coupling in cleavable van der Waals layered CrCl 3 crystals

CrCl 3 is a layered insulator that undergoes a crystallographic phase transition below room temperature and orders antiferromagnetically at low temperature. Weak van der Waals bonding between the layers and ferromagnetic in-plane magnetic order make it a promising material for obtaining atomically thin magnets and creating van der Waals heterostructures. In this work we have grown crystals of CrCl 3 , revisited the structural and thermodynamic properties of the bulk material, and explored mechanical exfoliation of the crystals. We find two distinct anomalies in the heat capacity at 14 and 17 K confirming that the magnetic order develops in two stages on cooling, with ferromagnetic correlations forming before long-range antiferromagnetic order develops between them. This scenario is supported by magnetization data. A magnetic phase diagram is constructed from the heat capacity and magnetization results. We also find an anomaly in the magnetic susceptibility at the crystallographic phase transition, indicating some coupling between the magnetism and the lattice. First-principles calculations accounting for van der Waals interactions also indicate spin-lattice coupling, and find multiple nearly degenerate crystallographic and magnetic structures consistent with the experimental observations. Lastly, we demonstrate that monolayer and few-layer CrCl 3 specimens can be produced from the bulk crystals by exfoliation, providing a path for the study of heterostructures and magnetism in ultrathin crystals down to the monolayer limit.

36 MATERIALS SCIENCE↗

DOE OSTI2023

Design and Prototyping of a Novel Toroidal Magnet System for MOLLER Experiment at Jefferson Lab

The Thomas Jefferson National Accelerator Facility (JLab) has designed a unique spectrometer system to measure the weak interaction between electrons. The experiment— Measurement of Lepton-Lepton Electroweak Reaction (MOLLER)—requires leveraging the recent 12 GeV electron beam upgrade and will run in JLab for three years. Focusing the signal for the MOLLER experiment requires five water-cooled toroidal magnets, each with unique geometry and with 7-fold symmetry. The five magnets operate in a vacuum and provide the magnetic field required to separate the incident beam electrons scattered from the target electrons (Møller scattering) and protons (elastic e-p scattering) in a liquid hydrogen target. The conceptual design was developed by the MOLLER Collaboration and was given to JLab in the form of amp turns and physical location, with additional physics requirements. This article presents prototyping of the coils and magnet support system and discusses the lessons learned during the process along with the plans for full magnet testing and installation. The JLab Magnet Group along with the MOLLER Collaboration developed the specification document that includes keep out zones to design the set of magnets. JLab contracted the design of the first toroid magnet (TM0) of the magnet system to Massachusetts Institute of Technology. The other four toroid magnets (TM1 through TM4) have been designed by JLab and are in the process of fabrication and assembly. Prototype coils of TM1-TM4 were fabricated by Everson-Tesla Incorporated, PA (USA). Finally, this article presents the unique challenges of the design, alignment, high current density, operating range, high radiation dose, and vacuum environment.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

DOE OSTI2024

HTS Accelerator Magnets Conceptual Design for Future Lepton Colliders

There is an interest in designing superconducting magnet systems for future lepton circular colliders. This application requires many low-field iron-dominated dipole and quadrupole magnets. Conventional room-temperature magnets are often used because of their low field, low total current, and low power losses. However, high electricity bills for large accelerators drive magnet design to superconductivity. High-temperature superconducting (HTS) magnets can substantially reduce energy losses in magnet systems. The present study investigated the conceptual design of HTS dipole and quadrupole magnets operating in persistent current mode. Energy is transferred into the magnet from an external detachable power source. A continuously circulating current generates a stable magnetic field. The iron-dominated magnet system concept was investigated using OPERA3D code, and the results confirmed the proposed approach’s validity.

43 PARTICLE ACCELERATORS↗

DOE OSTI2021

Study of Conduction-Cooled Superconducting Quadrupole Magnets Combined with Dipole Correctors for the ILC Main Linac

A superconducting rf (SRF) cryomodule for International Linear Collider(ILC) Main Linac equips focus/steering magnets. The magnets are "superferric" magnets with four superconducting (SC) race track coils conductively cooled from the cryomodule LHe supply pipe. The quadrupole field gradient and dipole field are 40 T/m and 0.1 T, respectively. The magnet length and iron-pole radius are 1 m and 0.045 m, respectively. It is known that dark current is generated at SRF cavities and accelerated through the following linac string. The dark current reaches and heats the SC magnets. It is estimated that the power deposition in the magnet may reach more than a few watts and temperature of the SC coils may locally reach to critical temperature of NbTi. It is important to make the magnet not reach quench with sufficient conduction cooling. We aim to realize the SC magnet which can stably operate under such condition. We plan to develop test coils made of three types of SC materials, NbTi, Nb₃Sn, and MgB₂ and study thermal characteristics and stability . We will develop a short model magnet, based on the test coil results. Here, we will present the magnet design study and the R&D plan.

43 PARTICLE ACCELERATORS↗

DOE OSTI2018

MAGNETIC HYGIENE CONTROL ON LCLS-II CRYOMODULES FABRICATED AT JLAB

Jefferson Lab (JLab) is in collaboration with Fermi Na-tional Accelerator Laboratory (Fermilab) to build 18 cryomodules to install at the SLAC National Accelerator Laboratory?s tunnel as part of the Linac Coherent Light Source upgrade project (LCLS-II). Each LCLS-II cry-omodule hosts 8 superconducting niobium cavities that adopt the nitrogen doping technique, which aims to en-hance the cavity quality factor Qo to reduce the consumption of liquid helium used to cool down the cavities. It is known that the Qo of niobium cavities is affected by cavity surface magnetic field. Traditionally, magnetic shields made of high magnetic permeability mu-metals are employed as a passive shielding of the ambient magnetic fluxes. During the LCLS-II cryomodule development, magnetic hygiene control that includes magnetic shielding and demagnetization of parts and the whole-machine is implemented. JLab and Fermilab worked closely on developing magnetic hygiene control procedures, identifying relevant tools, investigating causes of magnetization, magnetic field monitoring, etc. This paper focuses on JLab?s experiences with LCLS-II cryomodule magnetic hygiene control during its fabrication.

Cheng, Guangfeng↗

DOE OSTI2023

Magnetic contributions to corundum-eskolaite and corundum-hematite phase equilibria: A DFT cluster expansion study

Magnetic contributions have the potential to significantly influence predicted phase stability within alloy and mineral mixing phase diagrams, yet have been historically challenging to incorporate due to a significant increase to phase space sampling. Here, in this work, we employ a computational protocol that includes spin orientation as an additional configurational component within multi-component cluster expansions between magnetic and non-magnetic metal oxide alloys [calculated using density functional theory (DFT) and the generalized gradient approximation]. This approach was used to determine the effect of magnetic contributions to corundum-eskolaite and corundum-hematite phase equilibria from first principles. Two-component cluster expansions of the magnetic components of eskolaite and hematite were first performed showing the ability of this method to properly calculate their respective magnetic properties. Two-component cluster expansions were then performed for non-magnetic Al(III) and ferromagnetic Cr(III) and Fe(III), and phase diagrams were calculated for later comparison. Finally, a non-magnetic Al(III) and “up” and “down” magnetic configurations for anti-ferromagnetic Cr(III) and Fe(III) were performed. Magnetic contributions to the calculated phase diagram for the corundumeskolaite system were shown to be inconsequential but are vital for accurate determination of the corundum-hematite solvus.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2017

Mapping of orthogonal 2D flux coordinates for two nearby magnetic X-points to logically rectangular domains

The behavior of plasmas in configurations with magnetic null points is of potential interest for a number of systems. Such nulls, sometimes referred to as X-points, a name strictly valid only for wellseparated nulls where magnetic separatrices cross at a right angle, may occur in only one component of the magnetic field, such as the poloidal field in a tokamak. Numerical simulations are often used to study and predict turbulence and transport in such systems. For cases with strong magnetic field such that the ion and electron gyro-frequencies are much larger that particle collision frequencies, there is a strong anisotropy in the plasma transport along the magnetic field compared to across the field. Because of the strong anisotropy, it is often advantageous for simulations to use a coordinate system based on magnetic flux surfaces together with a coordinate orthogonal to the flux surfaces. This report presents the topological considerations needed to construct the mapping on an orthogonal flux-surface mesh onto a logically rectangular domain often used in simulation codes of the divertor region of tokamaks having two nearby X-points, thus extending the mapping now common single-null or well-separated double nullpoint cases with one null located at the top and bottom of the device. This extension is especially relevant to study the capability of snowflake divertors in tokamaks for reducing the peak heat flux of exhaust plasma on the target plates [1-3]. The analysis presented here follows the analytic description of the poloidal magnetic field, B pol , near two closely-spaced X-points given by Ryutov [1-3]. This analysis is applicable to experimental devices where the two X-points are generated by distributed poloidal field coils and the plasma core current. This analytic description is used to identify topological features of an orthogonal mesh. A key parameter that specifies the various topology changes is the poloidal angle between the primary X-point and the second X-point, and the changes are associated with a set of critical angles. Understanding these changes leads to the final step in the mesh construction by identifying the locations of various regions or patches in configuration space and in a corresponding logically rectangular index space. UEDGE [4] and other 2-D fluid plasma simulation codes [5-7] describe the edge plasma of toroidally symmetric tokamak configurations with one or more X-points in a divertor region. The 2-D spatial mesh is usually based on a magnetic configuration produced by an MHD equilibrium code such as EFIT and written out as one or more “eqdsk” files. As illustrated in Fig. 1, the domain of the simulated plasma consists of several flux tubes bounded by poloidal magnetic flux surfaces. The number and spacing of the flux surfaces defines the “radial” resolution of the mesh. The “radial” direction is locally orthogonal to flux surfaces; the “poloidal” direction is locally parallel to flux surfaces. The “poloidal” resolution of the mesh is defined by the number of cells in the poloidal direction between adjacent flux surfaces. For boundary plasma transport codes used for tokamak configurations such as UEDGE it is convenient, though not necessary, to assume that all flux tubes have the same number of poloidal cells so the mesh is logically rectangular in index space, but does possess internal boundaries linking different sub-rectangles in the computational domain. The following sections of this report describe indexing schemes that map tokamak magnetic configurations with one or more x-points in the divertor region(s) onto a rectangular index space. Simulation results from the UEDGE code illustrate the schemes for a few configurations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2020

Dual Phase Soft Magnetic Laminates for Low-cost, Non/Reduced-Rare-Earth Containing Electrical Machines

To accelerate the mass market adoption of electric drive vehicles, the key technology barriers in electric motors are (1) magnet cost and rare-earth element price volatility; (2) non-rare-earth electric motor performance; and (3) materials property optimization. The goal of this project was to address these barriers by advancing a unique and innovative dual phase soft magnetic material technology and demonstrating the material in a 30-kW synchronous reluctance motor without using any permanent magnet for electric vehicles. Dual phase magnetic materials offer the electric motor designer the ability to locally control the magnetic saturation level in a motor laminate, while at the same time enhancing the mechanical strength of the laminate material, resulting in an enhancement in motor performance and efficiency. Scalable dual phase soft magnetic laminates manufacturing technologies were developed in collaboration with multiple US manufacturers. 1000 lbs of alloy sheet with a thickness of 0.25mm and width of 280 mm was manufactured within the specifications. Batch sizes of up to 240 laminates per run were produced from the alloy sheet. Two prototype motors with dual phase soft magnetic laminates were designed, built, and tested. The major goal of building the subscale prototype as a pathway to develop scalable manufacturing technologies for the dual phase soft magnetic laminates was met. The additional goal of building and testing the subscale prototype in order to validate the calculated performance with the tested motor performance was also met. For the full-scale 30kW continuous power synchronous reluctance motor prototype, the tested performance met the targets in terms of continuous power at the operating speeds up to 8000 rpm. Post-test studies were conducted and the root causes for the discrepancy between the predicted and tested peak power, continuous power at high speed range, and efficiency were identified. Further modeling study showed that the dual phase rotor machine has a 27% higher torque to active weight ratio than an equivalent performance silicon steel rotor machine. Application space and multiple discussions with traction motor and electric vehicle manufacturers for commercialization of the dual phase soft magnetic material technology were identified and conducted. An initial cost model was established based on the developed manufacturing technologies with the US manufacturers. Future paths for further cost reduction were identified, including increasing the market volume by broadening the applications of the dual phase soft magnetic laminate technology for electric machines in other energy sections such as oil & gas, heating, ventilation, and air conditioning (HVAC), and power generation.

33 ADVANCED PROPULSION SYSTEMS↗

DOE OSTI2020

Magnetic Navigation for GPS-Denied Airborne Applications

Most current flight systems are dependent on GPS for navigation. Recently, however, navigation in GPS-denied environments has become an area of intensive research. Additional navigation sensor data can be obtained from visual observations (stars or terrain), inertial measurement units, radar, measurements of the local magnetic field, or perhaps even gravity. Absolute and relative positioning via magnetic field measurements have been shown to be viable in many applications including ground navigation, low altitude aircraft flight, and spaceflight. There is greater variability in the magnetic field over shorter distances when flying at low altitude and in ground applications, leading to more accurate positioning. However, ground-based magnetic navigation is often heavily influenced by man-made structures, especially in urban environments. This is not the case for airborne magnetic navigation since the influence of buildings, roads, etc. is negligible for typical aircraft altitudes. For absolute magnetic navigation, the positioning accuracy decreases as altitude increases for a given vehicle velocity, but the observed time variability in the field can be reclaimed by traveling faster through the field. Thus, navigation accuracy becomes a balance of speed and altitude since the higher altitude can be counterbalanced by higher velocity. To understand these effects quantitatively, we explored various techniques to aid a simulated inertial measurement unit with magnetic information. Using a technique known as two-dimensional magnetic map matching, we simulated the performance of airborne magnetic navigation at fixed speed while varying the altitude, flight direction, magnetometer data collection time, reference magnetic map bias error, and type of trajectory (over land or over ocean).

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2022

Acceptance Testing of the Scorpius Sweep Magnet

A beam-dump magnet for Scorpius has been defined by LANL and designed and built by Radiabeam Technologies. Initial verification of the Radiabeam design used a magnetic field model provided by Radiabeam and analyzed by LANL tools during September 2021. Simulations indicated that the design was sufficient to meet deflection requirements to protect sensitive equipment in the case of a failed target. In January 2022, the magnet was fabricated and Radiabeam conducted measurements of the magnetic field as a function of position. The measurements deviate somewhat from the simulation. In particular, the peak magnetic field is 10-15% smaller in magnitude than expected from simulation. This note compares the magnetic field measurements to simulation and to measurements of the existing DARHT magnet, which was designed for the same purpose. We show a comparison of the measured beam deflection performance between Scorpius and DARHT and show updated results of LANL’s electron beam tracking code using the Scorpius measurements. Using field measurements we find that the DARHT magnet will deflect a 19.6 MeV electron beam by 46.6° and the Scorpius magnet will deflect by 44.6°. These results show that the as-built Scorpius magnet has met design requirements for beam deflection.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

DOE OSTI2023

Design and Prototyping of a Novel Toroid Magnet System for the MOLLER Experiment at Jefferson Lab

The Thomas Jefferson National Accelerator Facility (JLab) has designed a unique spectrometer system to measure the weak interaction between electrons. The experiment ?Measurement of Lepton-Lepton Electroweak Reaction? (MOLLER) requires leveraging the recent 12 GeV electron beam upgrade and will run in JLab for 3 years. Focusing the signal for the MOLLER experiment requires five water-cooled toroidal magnets, each with unique geometry and with 7-fold symmetry. This system of magnets provides the magnetic field required to separate the incident beam electrons scattered from the target electrons (Møller scattering) and protons (elastic e-p scattering) in a liquid hydrogen target. The conceptual design was developed by the MOLLER collaboration and was given to JLab in the form of amp turns and physical location, with additional physics requirements. This paper presents prototyping of the coils and magnet support system and discusses the lessons learned during the process along with the plans for full magnet testing and installation. The JLab Magnet Group along with the MOLLER collaboration developed the specification document that includes keep out zones to design the set of magnets. JLab contracted the design of the first toroid magnet in the magnet (TM0) to Massachusetts Institute of Technology. The other four toroid magnets (TM1 through TM4) have been designed by JLab and are in the process of fabrication and assembly. Prototype coils of TM1-TM4 have been fabricated by Everson-Tesla Incorporated, PA (USA). The manuscript presents the unique challenges of the design, alignment, high current density, operating range, high radiation dose, and vacuum environment.

Kashy, David↗

DOE OSTI2024

Re-assembly and test of COMB dipole magnet with STAR® wires

Fermilab is developing the Conductor on Molded Barrel (COMB) magnet technology that works well with round REBCO conductors. COMB-STAR-1 magnet based on STAR wire by AMPeers was fabricated and tested in liquid nitrogen in 2023. The magnet demonstrated >90 Ic retention in the coils (before/after winding). Even though the magnet was not originally designed for operation at lower than 77 K temperatures, it was decided to test it in liquid helium to: - check the instrumentation and the DAQ system; - check the ability to detect resistive transitions or quenches and to protect the magnet; - gather the information on possible magnet design chances and upgrades of the test facility for future testing of HTS magnets. The magnet was re-assembled with a larger iron yoke and the axial supports and tested in liquid helium in 2024 at Fermilab s Vertical Magnet Test Facility (VMTF). It was the first HTS magnet test at that facility ever.

Kashikhin, Vadim↗

DOE OSTI2024

Measurement of the thermal effects in the dispersion relation of the dust acoustic wave in the presence of a magnetic field

This award supported an experimental study of the properties of the dust acoustic wave, low-frequency, l ongitudinal wave mode that propagates through the dust component of a dusty plasma system and is self-excited by the free energy from the ion streaming p ast the dust, in the presence of a high magnetic fiel d. In particular, this project measured the thermal state of dusty plasma system by measuring the dispersi on relation of the dust acoustic wave while varying (1) the strength and direction of the magnetic field relative to the propagation direction of the wave and (2) the neutral gas pressure. By exploiting the unique ability of the MDPX facility to generate a dusty plasma in a high magnetic field environment, it is possible to create a preferential ion flow along the magnetic field lines as the ions become magnetized. In this way, the magnetic field strength can be used to control t he strength of the ion flow through the dust cloud an d provide insight into the contribution that one of the physical mechanisms, a two-stream ion-dust instability, thought to be responsible for high temperatures that have been previously observed might have. This work was completed over two, one-week long runs o n the Magnetized Dusty Plasma eXperiment (MDPX) in the Magnetized Plasma Research Laboratory at Auburn University and supported by work at Wittenberg University (development of an electrode system that would allow for the wave mode to propagate in th e direction of gravity as the orientation of the magnetic field is changed by rotating the magnets on the M DPX device, analysis of data acquired during the experimental campaigns, testing alternative strategies to form a dust cloud based on what was learned the first experimental campaign, etc.).

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2025

Non-Equilibrium Effects in Quantum Magnets

While most often the state of a material will tend toward an equilibrium determined by its environment, there are many cases of scientific and technological interest where materials are manipulated to be or are found in non-equilibrium configurations. For example, data can be stored in hard drives by deliberately altering the magnetic orientation in a material to store information in non-equilibrium pattern. In this project, the main goals were studies of non-equilibrium properties of quantum magnets using neutron scattering as the primary experimental method. Neutron scattering allows characterization of magnetic correlation lengths sensitive to the presence of defects. It can also be used to distinguish equilibrium from non-equilibrium states via energy transfer rates. Typical bulk state magnetization relaxation times are too short to perform many neutron scattering measurements of interest. To enable the study of non-equilibrium conditions, materials with longer magnetic relaxation times were targeted. CoNb 2 O 6 was used in two experiments related to non-equilibrium physics. In the first, evidence for defects created via the Kibble-Zurek mechanism (KZM) was sought by quenching across a magnetic field-dependent phase transition. Somewhat unexpectedly, clear evidence for KZM-induced defects was absent. Additional measurements of CoNb 2 O 6 were made to better characterize its crystal field and other properties to provide a better theoretical understanding to enable more effective non-equilibrium physics measurements. In another project, LiHo 0.45 Y 0.55 F 4 was used to compare a quantum annealing protocol to a thermal annealing one since magnetic fields can be used to control the thermal fluctuations in LiHo 0.45 Y 0.55 F 4 . In addition, a new pulsed magnet power supply and new techniques were developed suitable for neutron scattering experimental environments to enable faster magnetic field changes for producing non-equilibrium conditions. The power supply developed for this project has wider technological applications in addition to faster magnetic field ramps.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2025

Additive manufacturing of amorphous metal soft magnetic composites

Soft magnet alloys are used as magnetic cores for electric motors, transformers, wind turbines and other power generation systems. Soft magnetic cores are expensive and time consuming to manufacture in the complex shapes required for next-generation devices using conventional press and sinter powder metallurgy. The objective of this effort is to additively manufacture high performance soft magnets, with reduced cost and reduced material waste and 10x lower energy (core) loss at the high operating frequencies of many electric machines. Laser powder bed fusion additive manufacturing is used as the fabrication method. Electrical steel and amorphous alloys atomized powders are used as a feedstock materials. Magnetic cores are printed in topology optimized structures such as the Hilbert curve because this has been shown to reduce energy losses by minimizing the eddy currents that circulate within the magnet at high frequencies. In our project, we succeed in printing FeSi 3.5wt% and FeSi 6.5wt% electrical steels, and iron-based soft magnetic amorphous alloys in the shape of Hilbert and Peano curve topology optimized structures. We found that the Peano curve has a higher cut-off frequency than the Hilbert curve, and that amorphous alloys have high cut-off frequencies and higher mechanical hardness than electrical steels. Processing conditions such as laser power, scan speed, and hatching pattern were optimized to achieve high density prints, and optimize magnetic performance. We find that the printing of amorphous alloy soft magnetic cores may be technoeconomically feasible for large scale applications such as transformers, for which supply chain issues and the labor costs of manual fabrication of magnetic cores is prohibitive in some cases.

36 MATERIALS SCIENCE↗