Properties of single crystalline A Zn 2 Sb 2 ( A = Ca,Eu,Yb)
Explore the source record for details and available documents.
SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Explore the source record for details and available documents.
X ray photoelectron diffraction (XPD) patterns of polar zinc oxide (ZnO) surfaces were investigated experimentally using hard x rays and monochromatized Cr K{alpha} radiation and theoretically using a cluster model approach and a dynamical Bloch wave approach. We focused on photoelectrons emitted from the Zn 2p{sub 3/2} and O 1s orbitals in the analysis. The obtained XPD patterns for the (0001) and (0001) surfaces of a ZnO single crystal were distinct for a given emitter and polarity. Polarity determination of c-axis-textured polycrystalline ZnO thin films was also achieved with the concept of XPD, even though the in-plane orientation of the columnar ZnO grains was random.
Epitaxial Ag(001) layers were deposited on MgO(001) in order to study electron surface scattering. X-ray reflection indicates 3D layer nucleation with a high rms surface roughness of 1.0 nm for a layer thickness d = 3.5 nm. X-ray diffraction shows that {l_brace}111{r_brace} twins form at d < 11 nm, followed by 2nd generation twinning for 11 nm < d < 120 nm. Increasing the growth temperature from 25 to 150 deg. C suppresses 2nd generation twinning and reduces the twin density by 2 orders of magnitude. In situ deposition of epitaxial 2.5-nm-thick TiN(001) underlayers prior to Ag deposition results in twin-free single-crystal Ag(001) with 10 x smoother surfaces for d = 3.5 nm. This is attributed to a better wetting on the higher energy TiN(001) than MgO(001) surface, resulting in the absence of 3D nuclei with exposed {l_brace}111{r_brace} facets, which facilitate twin nucleation. The twinned Ag/MgO layers have a higher resistivity {rho} than the single crystal Ag/TiN layers at both 298 and 77 K, due to electron scattering at grain and twin boundaries. The {rho} for single-crystal Ag layers increases with decreasing d, which is well explained with known surface scattering models and provides specularity parameters for the Ag-vacuum and the Ag-air interfaces of p = 0.8 {+-} 0.1 and 0.4 {+-} 0.1, respectively. A comparison with corresponding epitaxial Cu(001) layers shows that {rho}{sub Ag} < {rho}{sub Cu} for d > 50 nm, consistent with known bulk values. However, {rho}{sub Ag} > {rho}{sub Cu} for d < 40 nm. This is attributed to the larger electron mean free path for electron-phonon scattering and a correspondingly higher resistivity contribution from surface scattering in Ag than Cu. In contrast, air exposure causes {rho}{sub Ag} < {rho}{sub Cu} for all d, due to diffuse scattering at the oxidized Cu surface and the correspondingly higher Cu resistivity.
Epitaxial La{sub 0.67}Ca{sub 0.33}MnO{sub 3}:SrTiO{sub 3} (LCMO:STO) composite thin films have been grown on single crystal LaAlO{sub 3}(001) substrates by a cost effective polymer-assisted deposition method. Both x-ray diffraction and high-resolution transmission electron microscopy confirm the growth of epitaxial films with an epitaxial relationship between the films and the substrates as (002){sub film}||(002){sub sub} and [202]{sub film}||[202]{sub sub}. The transport property measurement shows that the STO phase significantly increases the resistivity and enhances the magnetoresistance (MR) effect of LCMO and moves the metal-insulator transition to lower temperatures. For example, the MR values measured at magnetic fields of 0 and 3 T are {approx}44.6% at 255 K for LCMO, {approx}94.2% at 125 K for LCMO:3% STO, and {approx}99.4% at 100 K for LCMO:5% STO, respectively.
We examine UV laser-induced ion emission from a wide bandgap semiconductor, single-crystal ZnO, at fluences well below both the damage threshold and plasma formation. At fluences below 200 mJ/cm{sup 2}, we observe only Zn{sup +}, and the Zn{sup +} intensity decreases monotonically during exposure. At higher fluences, after an initial decrease, the emission is sustained; in addition O{sup +} and O{sub 2}{sup +} are observed. We explain: how Zn ions of several eV in energy can be produced on the surface of a semiconductor, how sustained emission can be maintained, and the origin of an anomalous emission of slow Zn{sup +} ions -- the latter is shown to arise from photoionization of atomic Zn, also emitted by this radiation.
The paper presents the results of investigation the process of formation of the ordered microstructures of dislocations in the near-surface layer a single-crystal plate of silicon under the action of pulsed laser radiation with microstructured distribution intensity. It has been found that generation of the ordered one-dimensional microstructures of dislocations takes place. The period of these ordered microstructures is d{approx_equal}3 divide 4 {mu}m. A combination of one-dimensional structures of dislocations produces ordered two-dimensional structure of dislocations.
We report photocarrier time-of-flight measurements of electron drift mobilities for the p-type CuIn{sub 1-x}Ga{sub x}Se{sub 2} films incorporated in solar cells. The electron mobilities range from 0.02 to 0.05 cm{sup 2}/Vs and are weakly temperature-dependent from 100-300 K. These values are lower than the range of electron Hall mobilities (2-1100 cm{sup 2}/Vs) reported for n-type polycrystalline thin films and single crystals. We propose that the electron drift mobilities are properties of disorder-induced mobility edges and discuss how this disorder could increase cell efficiencies.
Interaction between grain boundaries and radiation is studied in 3C-SiC by conducting molecular dynamics cascade simulations on bicrystal samples with different misorientation angles. The damage in the in-grain regions was found to be unaffected by the grain boundary type and is comparable to damage in single crystal SiC. Radiation-induced chemical disorder in the grain boundary regions is quantified using the homonuclear to heteronuclear bond ratio ({chi}). We found that {chi} increases nearly monotonically with the misorientation angle, which behavior has been attributed to the decreasing distance between the grain boundary dislocation cores with an increasing misorientation angle. The change in the chemical disorder due to irradiation was found to be independent of the type of the grain boundary.
Magnesium-doped boron nanoswords were synthesized via a thermoreduction method. The as-prepared nanoswords are single crystalline and {beta}-rhombohedral ({beta}-rh) phase. Electrical transport measurements show that variable range hopping conductivity increases with temperature, and carrier mobility has a greater influence than carrier concentration. These results are consistent with the three dimensional Mott's model (M. Cutler and N. F. Mott, Phys. Rev. 181, 1336 (1969)) besides a high density of localized states at the Fermi level compared with bulk {beta}-rh boron. Conductivity of Mg-doped boron nanoswords is significantly lower than that of ''pure'' (free of magnesium) boron nanoswords. Electron energy loss spectroscopy studies confirm that the poorer conductivity arises from silicon against magnesium doping.
Single HfC nanowire field emitter/electrode structures have been fabricated using nano-assembling and electron beam induced deposition. Field ion microscopy has been applied to study the atomic arrangement of facets formed on a field evaporation-modified HfC nanowire tip. Field evaporation and crystal form studies suggest that the {l_brace}111{r_brace} and {l_brace}110{r_brace} crystal planes have lower work functions, while the {l_brace}100{r_brace}, {l_brace}210{r_brace}, and {l_brace}311{r_brace} planes have higher work functions. Field emission measurement permits us to obtain that the work function of the {l_brace}111{r_brace} crystal plane is about 3.4 eV.
An epitaxial layer of SrTiO{sub 3} grown directly on Si may be used as a pseudo-substrate for the integration of perovskite oxides onto silicon. When SrTiO{sub 3} is initially grown on Si (001), it is nominally compressively strained. However, by subsequent annealing in oxygen at elevated temperature, an SiO{sub x} interlayer can be formed which alters the strain state of SrTiO{sub 3}. We report a study of strain relaxation in SrTiO{sub 3} films grown on Si by molecular beam epitaxy as a function of annealing time and oxygen partial pressure. Using a combination of x-ray diffraction, reflection high energy electron diffraction, and transmission electron microscopy, we describe the process of interfacial oxidation and strain relaxation of SrTiO{sub 3} on Si (001). Understanding the process of strain relaxation of SrTiO{sub 3} on silicon will be useful for controlling the SrTiO{sub 3} lattice constant for lattice matching with functional oxide overlayers.
In this study, 4 x 4 mm{sup 2} freestanding boron-doped diamond single crystals with thickness up to 260 {mu}m have been fabricated by plasma assisted chemical vapour deposition. The boron concentrations measured by secondary ion mass spectroscopy were 10{sup 18} to 10{sup 20} cm{sup -3} which is in a good agreement with the values calculated from Fourier transform infrared spectroscopy analysis, thus indicating that almost all incorporated boron is electrically active. The dependence of lattice parameters and crystal mosaicity on boron concentrations have also been extracted from high resolution x-ray diffraction experiments on (004) planes. The widths of x-ray rocking curves have globally shown the high quality of the material despite a substantial broadening of the peak, indicating a decrease of structural quality with increasing boron doping levels. Finally, the suitability of these crystals for the development of vertical power electronic devices has been confirmed by four-point probe measurements from which electrical resistivities as low as 0.26 {Omega} cm have been obtained.
The interaction of charged particles with condensed water films has been studied extensively in recent years due to its importance in biological systems, ecology as well as interstellar processes. We have studied low energy electrons (3-25 eV) and positive argon ions (55 eV) charging effects on amorphous solid water (ASW) and ice films, 120-1080 ML thick, deposited on ruthenium single crystal under ultrahigh vacuum conditions. Charging the ASW films by both electrons and positive argon ions has been measured using a Kelvin probe for contact potential difference (CPD) detection and found to obey plate capacitor physics. The incoming electrons kinetic energy has defined the maximum measurable CPD values by retarding further impinging electrons. L-defects (shallow traps) are suggested to be populated by the penetrating electrons and stabilize them. Low energy electron transmission measurements (currents of 0.4-1.5 {mu}A) have shown that the maximal and stable CPD values were obtained only after a relatively slow change has been completed within the ASW structure. Once the film has been stabilized, the spontaneous discharge was measured over a period of several hours at 103 {+-} 2 K. Finally, UV laser photo-emission study of the charged films has suggested that the negative charges tend to reside primarily at the ASW-vacuum interface, in good agreement with the known behavior of charged water clusters.
Tungsten single atom tips have been prepared from a single crystal W(111) oriented wire using the chemical assisted field evaporation and etching method. Etching to a single atom tip occurs through a symmetric structure and leads to a predictable last atom unlike etching with polycrystalline tips. The single atom tip formation procedure is shown in an atom by atom removal process. Rebuilds of single atom tips occur on the same crystalline axis as the original tip such that ion emission emanates along a fixed direction for all tip rebuilds. This preparation method could be utilized and developed to prepare single atom tips for ion source development.
Ferroelectric domain structures in YMnO{sub 3} single crystals on the hexagonal polar surface have been investigated by scanning electron microscopy in secondary electron emission mode. The experimental results demonstrate that the domain, as well as domain walls, can be clearly revealed under the operation voltages ranging from 0.6 to 3 kV. Evolution of domain contrasts arising from electron-beam irradiation can be mainly explained by the pyroelectric effect and related charging process. A rich variety of microstructure features of ferroelectric domains can be clearly revealed in YMnO{sub 3} by this high-resolution technique.
We investigate the initial growth modes and the role of interfacial electrostatic interactions of EuO epitaxy on MgO(001) by reactive molecular beam epitaxy. A TiO{sub 2} interfacial layer is employed to produce high quality epitaxial growth of EuO on MgO(001) with a 45 deg. in plane rotation. For comparison, direct deposition of EuO on MgO, without the TiO{sub 2} layer shows a much slower time evolution in producing a single crystal film. Conceptual arguments of electrostatic repulsion of like-ions are introduced to explain the increased EuO quality at the interface with the TiO{sub 2} layer. It is shown that ultrathin EuO films in the monolayer regime can be produced on the TiO{sub 2} surface by substrate-supplied oxidation and that such films have bulk Curie temperatures.
Transmission electron microscopy (TEM) has been used to investigate the effects of room temperature 6 keV helium ion irradiation of a thin ({approx_equal}55 nm thick) tri-layer consisting of polycrystalline Si, silica, and single-crystal Si. The ion irradiation was carried out in situ within the TEM under conditions where approximately 24% of the incident ions came to rest in the specimen. This paper reports on the comparative development of irradiation-induced defects (primarily helium bubbles) in the polycrystalline Si and single-crystal Si under ion irradiation and provides direct measurement of a radiation-induced increase in the width of the polycrystalline layer and shrinkage of the silica layer. Analysis using TEM and electron energy-loss spectroscopy has led to the hypothesis that these result from helium-bubble-induced swelling of the silicon and radiation-induced viscoelastic flow processes in the silica under the influence of stresses applied by the swollen Si layers. The silicon and silica layers are sputtered as a result of the helium ion irradiation; however, this is estimated to be a relatively minor effect with swelling and stress-related viscoelastic flow being the dominant mechanisms of dimensional change.
A fast neutron detection system suitable for high rate measurements is presented. The detector is based on a commercial high purity single crystal diamond (SDD) coupled to a fast digital data acquisition system. The detector was tested at the ISIS pulsed spallation neutron source. The SDD event signal was digitized at 1 GHz to reconstruct the deposited energy (pulse amplitude) and neutron arrival time; the event time of flight (ToF) was obtained relative to the recorded proton beam signal t{sub 0}. Fast acquisition is needed since the peak count rate is very high ({approx}800 kHz) due to the pulsed structure of the neutron beam. Measurements at ISIS indicate that three characteristics regions exist in the biparametric spectrum: i) background gamma events of low pulse amplitudes; ii) low pulse amplitude neutron events in the energy range E{sub dep}= 1.5-7 MeV ascribed to neutron elastic scattering on {sup 12}C; iii) large pulse amplitude neutron events with E{sub n} < 7 MeV ascribed to {sup 12}C(n,{alpha}){sup 9}Be and 12C(n,n')3{alpha}.