Search NASA⌕ Search

SEARCH · Search NASA

Results for “Material Testing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,639 records · Page 91

Developments in Die Pressing Strategies for Low-Cost Titanium Powders

Recent developments in the production of low-cost titanium powders have rejuvenated interest in manufacturing titanium powder metallurgy components by direct press and sinter techniques. However excessive friction typically observed during titanium powder pressing operations leads to numerous problems ranging from non-homogeneous green densities of the compacted powder to excessive part ejection forces and reduced die life due to wear and galling. An instrumented double-acting die press was developed to both investigate the mechanics of titanium powder pressing (particularly for the new low-cost powder morphologies) and to screen potential lubricants that could reduce frictional effects. As will be discussed, the instrument was used to determine friction coefficients and to evaluate a number of candidate lubricants. These results were then used to optimize the lubricant system to reduce die-wall stresses and improve part density uniformity.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

SrI2 scintillator for gamma ray spectroscopy

We are working to perfect the growth of divalent Eu-doped strontium iodide single crystals and to optimize the design of SrI 2(Eu)-based gamma ray spectrometers. SrI 2(Eu) offers a light yield in excess of 100,000 photons/MeV and light yield proportionality surpassing that of Ce-doped lanthanum bromide. Thermal and x-ray diffraction analyses of SrI2 and EuI2 indicate an excellent match in melting and crystallographic parameters, and very modest thermal expansion anisotropy. We have demonstrated energy resolution with SrI2(4-6%Eu) of 2.6% at 662 keV and 7.6% at 60 keV with small crystals, while the resolution degrades somewhat for larger sizes. Our experiments suggest that digital techniques may be useful in improving the energy resolution in large crystals impaired by light-trapping, in which scintillation light is re-absorbed and re-emitted in large and/or highly Eu2+ -doped crystals. The light yield proportionality of SrI2(Eu) is found to be superior to that of other known scintillator materials, such as LaBr3(Ce) and NaI(Tl).

36 MATERIALS SCIENCE↗

Studies of Non-Proportionality in Alkali Halide and Strontium Iodide Scintillators Using SLYNCI 6-16-2009

Recently a collaboration of LLNL and LBNL has constructed a second generation Compton coincidence instrument to study the non-proportionality of scintillators. This device, known as SLYNCI (Scintillator Light-Yield Non-proportionality Characterization Instrument), has can completely characterize a sample with less than 24 hours of running time. Thus, SLYNCI enables a number of systematic studies of scintillators since many samples can be processed in a reasonable length of time. These studies include differences in non-proportionality between different types of scintillators, different members of the same family of scintillators, and impact of different doping levels. The results of such recent studies are presented here, including a study of various alkali halides, and the impact of europium doping level in strontium iodide. Directions of future work area also discussed.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Recovery Boiler Superheater Ash Corrosion Field Study

With the trend towards increasing the energy efficiency of black liquor recovery boilers operated in North America, there is a need to utilize superheater tubes with increased corrosion resistance that will permit operation at higher temperatures and pressures. In an effort to identify alloys with improved corrosion resistance under more harsh operating conditions, a field exposure was conducted that involved the insertion of an air-cooled probe, containing six candidate alloys, into the superheater section of an operating recovery boiler. A metallographic examination, complete with corrosion scale characterization using EMPA, was conducted after a 1,000 hour exposure period. Based on the results, a ranking of alloys based on corrosion performance was obtained.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Linear actuation using milligram quantities of CL-20 and TAGDNAT.

There are numerous applications for small-scale actuation utilizing pyrotechnics and explosives. In certain applications, especially when multiple actuation strokes are needed, or actuator reuse is required, it is desirable to have all gaseous combustion products with no condensed residue in the actuator cylinder. Toward this goal, we have performed experiments on utilizing milligram quantities of high explosives to drive a millimeter-diameter actuator with a stroke of 30 mm. Calculations were performed to select proper material quantities to provide 0.5 J of actuation energy. This was performed utilizing the thermochemical code Cheetah to calculate the impetus for numerous propellants and to select quantities based on estimated efficiencies of these propellants at small scales. Milligram quantities of propellants were loaded into a small-scale actuator and ignited with an ignition increment and hot wire ignition. Actuator combustion chamber pressure was monitored with a pressure transducer and actuator stroke was monitored using a laser displacement meter. Total actuation energy was determined by calculating the kinetic energy of reaction mass motion against gravity. Of the materials utilized, the best performance was obtained with a mixture of 2,4,6,8,10,12-hexanitro-2,4,6,8,10,12-hexaazaisowurtzitane (CL-20) and bis-triaminoguanidinium(3,3{prime}dinitroazotriazolate) (TAGDNAT).

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

Critical currents of YBCO tapes and Bi-2212 wires at different temperatures and magnetic fields

Design studies for the cooling channel of a Muon Collider call for straight and helical solenoids generating field well in excess of the critical fields of state of the art Low Temperature Superconductors (LTS) such as Nb{sub 3}Sn or NbTi. Therefore, High Temperature Superconductors (HTS) will need to be used for the manufacturing of all or certain sections of such magnets to be able to generate and withstand the field levels at the cryogenic temperatures required by the new machine. In this work, two major High Temperature Superconductors - Bi2212 round wires and YBCO coated conductor tapes - are investigated to understand how critical current density of such conductors scales as a function of external field and operating temperature. This is vital information to make conductor choices depending on the application and to proceed with the design of such magnets.

43 PARTICLE ACCELERATORS↗

Validation of a Custom Ball-on-Ring Apparatus and Consideration of Common Issues for Use in Further Testing (SULI Deliverables)

Ceramic materials are well-known for their high hardness and strength but are limited in their application due to low toughness and sudden failure. As a potential solution, inspiration can be taken from dental enamel nanostructure, where undulating rods cause cracks to branch or deflect, increasing the energy needed to cause total fracture of a ceramic part. Following the dental enamel structure, a novel ceramic which uses 3D printed Yttria stabilized Zirconia rods in an alumina matrix was developed. To test this bio-inspired ceramic material, a proper testing apparatus needed to be created and tested to verify its accuracy. For this project, a bespoke ball on ring testing apparatus was created and tested using both conventionally sintered alumina disks and purchased alumina disks to validate its accuracy. By comparing the Weibull distribution of rupture strengths measured by the tests to literature values, it was shown that the testing frame had a wide distribution of strength which did not align with literature values on the lower end. Through fractography, it was found that some samples fractured from the contact stress induced by the ball indenter, which could not be used to calculate rupture strength. This fracture was often linked to low stress to failure, which was initiated by a flaw on the surface near the indenter which acted as a stress concentrator. Removal of these samples from the data set increased the accuracy of the reported rupture strength values for the ceramic. Considering the equations for the magnitude of contact and flexural strength, along with observations of initiating flaws, several measures can be taken for testing the bio-inspired composite. These measures include proper polishing of both sides of the sample, reducing sample thickness, and potentially using a softer indenter material.

36 - MATERIALS SCIENCE↗

The Uranium from Seawater Program at the Pacific Northwest National Laboratory: Overview of Marine Testing, Adsorbent Characterization, Adsorbent Durability, Adsorbent Toxicity, and Deployment Studies

The Pacific Northwest National Laboratory’s (PNNL) Marine Science Laboratory (MSL) located along the coast of Washington State is evaluating the performance of uranium adsorption materials being developed for seawater extraction under realistic marine conditions with natural seawater. Two types of exposure systems were employed in this program: flow-through columns for testing of fixed beds of individual fibers and pellets and a recirculating water flume for testing of braided adsorbent material. Testing consists of measurements of the adsorption of uranium and other elements from seawater as a function of time, typically 42 to 56 day exposures, to determine the adsorbent capacity and adsorption rate (kinetics). Analysis of uranium and other trace elements collected by the adsorbents was conducted following strong acid digestion of the adsorbent with 50% aqua regia using either Inductively Coupled Plasma Optical Emission Spectrometry (ICP-OES) or Inductively Coupled Plasma Mass Spectrometer (ICP-MS). The ORNL 38H adsorbent had a 56 day adsorption capacity of 3.30 ± 0.68 g U/ kg adsorbent (normalized to a salinity of 35 psu), a saturation adsorption capacity of 4.89 ± 0.83 g U/kg of adsorbent material (normalized to a salinity of 35 psu) and a half-saturation time of 28 ± 10 days. The AF1 adsorbent material had a 56 day adsorption capacity of 3.9 ± 0.2 g U/kg adsorbent material (normalized to a salinity of 35 psu), a saturation capacity of 5.4 ± 0.2 g U/kg adsorbent material (normalized to a salinity of 35 psu) and a half saturation time of 23 ± 2 days. The ORNL amidoxime-based adsorbent materials are not specific for uranium, but also adsorb other elements from seawater. The major doubly charged cations in seawater (Ca and Mg) account for a majority of the cations adsorbed (61% by mass and 74% by molar percent). For the ORNL AF1 adsorbent material, U is the 4th most abundant element adsorbed by mass and 7th most abundant by molar percentage

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Corium stratification test using intermediate products of degraded core materials in severe accident of BWR

Two series of corium stratification tests using samples including intermediate products (B{sub 4}C-Fe alloy, Fe-Zr alloy) in BWR severe accidents were performed to investigate the influence of initial chemical composition. Chemical features of intermediate products of degraded core materials in severe accidents are considered to change depend upon oxygen potential in the atmosphere and temperature of the products in accordance with the accident progression and the features are highly important for evaluating the relocation and stratification behavior of fuel debris, especially for boron distribution in fuel debris. The initial compositions of samples were determined based on the results of our previous control blade and channel box degradation tests. The present results indicate that the U concentration in the metallic layer largely depends on the oxygen potential in the atmosphere and the apparent red-ox reaction rate between UO{sub 2} and Zr is mitigated when the typical intermediate product B{sub 4}C-Fe alloy coexists with UO{sub 2} and Zr. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Advancing Core Safety of Gen IV and Gen IV + Reactors by Encompassing High-Temperature Resistant Materials - 18673

The paper focuses on the development of materials for Gen IV/IV+ reactor core. It discusses the advancement of materials studied and their application in different components of the reactor core and other auxiliary components which will help in the development of future generation reactors. The paper summarizes the material study showing the characteristic behavior of different materials (coated with FeB and FeB{sub 2}), towards irradiation at near high temperatures and high energy neutron flux condition. The project includes different materials which are coated on the boundaries with varied thickness of FeB and FeB{sub 2}. The samples included Carbon steel, Stainless steel 310, Stainless steel 316, Inconel 718. All above-mentioned samples were received by Prof. J. Szpunar, through an industry with coatings of FeB and FeB{sub 2} with varied thickness along with a bare sample of each material. The samples were irradiated at the University of Saskatchewan reactor, with fast neutron flux of 1.1x10{sup 11} n.cm{sup -2}.sec{sup -1}. I worked on all the samples but the paper particularly focuses on, two carbon steel samples results, received so far. The methodology for the project been followed for all the samples is as follow: 1. Received samples were first polished. 2. Vickers Hardness Test. 3. Mirror polished. 4. Etched with the appropriate etchant for the material. 5. Microscopic study of the etched surface. 6. SEM imaging. 7. Sent for irradiation. 8. The same set of material testing done after irradiation, with an EBSD run on the boundary and main surface. The two Carbon Steel samples (sample 21 and 19) analyzed, were irradiated for 14 hrs. Sample 21 was a bare sample and sample 19 had a coating of FeB, FeB{sub 2} with a ∼0.0010'' thickness. The methodology was followed for material testing before and after the irradiation. The advantage of FeB and FeB{sub 2} coatings are: 1. Higher hardness - 10 times (FeB-1775 and FeB{sub 2}-1450), 2. High-stress capacity, 3. Lower abrasion, 4. Low corrosion. Through the test results obtained before and after the irradiation, I was able to get a view of coating damage at the boundaries of sample 19. The bare sample don't show any difference after irradiation but the coated sample do show cracks in the FeB layer. Which can be seen in the SEM images of sample 19. The hardness results are promising, as hardness didn't change significantly. The hardness test was done on the substrate as the coating was significantly narrow to perform the test. Though the hardness test on coatings was performed by the possessor company which show hardness higher by a factor of 10 when compared to uncoated surfaces. The XRD results, reveal irradiation effect on the crystal lattice, making it deformed, which though is usual during irradiation. The overall analysis along with EBSD done on the two samples are favorable and promising. Though it still needs to be cleared out, whether the cracks on the coating were due to irradiation or due to etching after the samples were irradiated.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

ORNL Package Testing Program Overview

Radioactive materials are widespread in our everyday activities which are used in many different types of industries: Consumer products, Medicine, Industry, Energy, and Defense. In the United States there is about 3 million shipments of radioactive materials per year. With radioactive material being very widespread the number of new applications to ship these quantities increases daily. As such, ensuring the safe and secure transport of these materials is paramount, necessitating stringent packaging, transportation, and certification requirements. Shipments of radioactive materials have been made from Oak Ridge National Laboratory (ORNL) for the past 65 years. Since the 1940s ORNL has been at the forefront of the early development of regulations pertaining to the transport of radioactive shipments and associated regulatory testing. The early involvement resulted in ORNL being one of the leaders in the development of regulations and testing standards pertaining to the testing and design of packages. Today all package testing activities are conducted under the Package Testing Program (PTP) at ORNL at the Package Evaluation Facility (PEF). The PTP develops and evaluates testing solutions – ensuring that they are safe, efficient, and meet regulatory requirements ORNL PTP has extensive experience in the regulatory testing of radioactive material packages, supporting certification of Type A, Type, B, Type AF, and special form packages. The PEF serves as a one-stop-shop for design, testing, and certification of a wide variety of packages needed for shipment of radioactive materials. The facility provides the space, expertise, and equipment necessary to conduct rigorous performance testing under both normal and accident conditions or transport environments including free drop, dynamic crush, puncture, penetration, compression, vibration, water spray, water immersion, and thermal test. The PTP remains a key contributor to the safety and compliance of radioactive material transportation. This presentation will provide an overview of the program’s history, capabilities, and its ongoing role in advancing regulatory standards and transportation safety.

Martinez, Oscar [ORNL] (ORCID:0000000181814046)↗

Irradiation and corrosion testing of laser powder bed fusion-manufactured materials in the AMMT program

The Advanced Materials and Manufacturing Technologies (AMMT) program operating under the Department of Energy Office of Nuclear Energy is accelerating the qualification and deployment of additively manufactured materials in advanced reactor environments. Laser powder bed fusion (LPBF) has emerged as a promising additive manufacturing technique to fabricate complex components with the potential of tailored material properties. In the nuclear industry, metal additive manufacturing can offer numerous advantages, such as reduced lead times, streamlined quality assurance, and cost-effective low-volume production of new and replacement components with conventional or novel materials and geometries. The rapid and effective qualification of the effect of processing variability on the performance and degradation of additively manufactured materials is essential for the deployment of these components into advanced reactor environments. As part of this effort, AMMT is performing irradiation and corrosion testing of several materials built by LPBF, including 316L and 316H stainless steels. Our efforts encompass neutron irradiation testing, ion irradiation testing, and advanced modeling to provide a robust technical basis for understanding the effect of process variability on materials degradation and developing a sound methodology for accelerated ion irradiation testing. We develop focused irradiation test plans that align well with risk-informed and technologically inclusive approaches to licensing. We will also discuss our plans and specific concerns for corrosion testing additively manufactured material, with a primary focus on molten salt and liquid sodium environments.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Test and Chemistry Plan for MEDE Treatment of Fermi-1 Blanket Materials

There exists approximately 34 metric tons of Fermi-1 nuclear power reactor blanket assemblies at the Idaho National Laboratory (INL). Contained in this material is about 365 kg of sodium metal. In 2000, the Final Environmental Impact Statement for the Treatment and Management of Sodium-Bonded Spent Nuclear Fuel was issued. In the EIS, the No Action Alternative was preferred for the Fermi-1 blanket material. Under the No Action Alternative, two options were analyzed: • Continued storage until 2035 or until development of a new or currently less mature technology to treat all or part of the sodium-bonded material. • Direct disposal of the sodium-bonded material in high-integrity cans. This report with document how the Melt-Drain-Evaporate (MEDE) process, developed by Argonne National Laboratory (ANL), can be used to treat full-length Fermi-1 blanket material to remove the sodium, eliminate the hazards associated with that metal, all while minimizing the effort needed. Previous work by ANL showed the process worked very well with chopped, shorter segments of this material. If successful, the removal of the sodium from the material may allow the Fermi-1 blanket material to be disposed via existing or future planned disposal pathways for similar materials. This document presents the test plan for the evaluation of sodium removal from intact Fermi-1 reactor blanket materials by the MEDE process. This test plan establishes the objectives for such testing, which includes the anticipated outcomes, a summary of the testing parameters, and an overview of the testing process. This test plan does not provide technical direction or work control guidance; that is the role of a Laboratory Instruction (LI) that will be issued to govern the work.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗