Search NASA⌕ Search

SEARCH · Search NASA

Results for “Methods in superconductivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,639 records · Page 91

InGaP/GaAs Inverted Dual Junction Solar Cells For CPV Applications Using Metal-Backed Epitaxial Lift-Off

The epitaxial lift-off (ELO) technique has been combined with inverted III-V PV cell epitaxial growth with the aim of employing thin film PV cells in HCPV systems. In a stepwise approach to the realization of an inverted triple junction on a MELO platform we have first grown a GaAs single junction PV cell to establish the basic layer release process and cell processing steps followed by the growth, fabrication and test of an inverted InGaP/GaAs dual junction structure.

36 MATERIALS SCIENCE↗

C{sub 6}H{sub 6}/Au(111): Interface dipoles, band alignment, charging energy, and van der Waals interaction

We analyze the benzene/Au(111) interface taking into account charging energy effects to properly describe the electronic structure of the interface and van der Waals interactions to obtain the adsorption energy and geometry. We also analyze the interface dipoles and discuss the barrier formation as a function of the metal work-function. We interpret our DFT calculations within the induced density of interface states (IDIS) model. Our results compare well with experimental and other theoretical results, showing that the dipole formation of these interfaces is due to the charge transfer between the metal and benzene, as described in the IDIS model.

36 MATERIALS SCIENCE↗

X-Ray And Polarized Neutron Reflectometry: Characterization Of Si/Co/Si And Si/Ni/Si Systems

Technologically important metal silicides formed through interdiffusion in metal/Si systems has been probed using two complementary techniques viz. x-ray reflectivity (XRR) and polarized neutron reflectivity (PNR). Both structural and magnetic characterization with good depth resolution has been achieved in these systems. We have studied two systems Si/Co/Si and Si/Ni/Si which relate to important applications in ferromagnetic/ non-magnetic semiconductor layered structures for memory devices.

36 MATERIALS SCIENCE↗

Tuning the period of elastic MnAs/GaAs(001) {alpha}-{beta} pattern by Fe deposition

The {alpha}-{beta} elastic striped pattern of MnAs/GaAs(001) is shown to be perturbed by Fe overlayer growth. After nanometric Fe thin film deposition, the elastic pattern is still present in the 10-45 deg. C temperature range, but the period of the pattern increases by up to 40% for MnAs epilayers 70 to 400 nm thick. This observation can be interpreted within a simple model calculation of the pattern elastic energy, providing quantitative agreement with the experimental results.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Monolithic single GaN nanowire laser with photonic crystal microcavity on silicon

Optically pumped lasing at room temperature in a silicon based monolithic single GaN nanowire with a two-dimensional photonic crystal microcavity is demonstrated. Catalyst-free nanowires with low density ({approx}10{sup 8} cm{sup -2}) are grown on Si by plasma-assisted molecular beam epitaxy. High resolution transmission electron microscopy images reveal that the nanowires are of wurtzite structure and they have no observable defects. A single nanowire laser fabricated on Si is characterized by a lasing transition at {lambda}=371.3 nm with a linewidth of 0.55 nm. The threshold is observed at a pump power density of {approx}120 kW/cm{sup 2} and the spontaneous emission factor {beta} is estimated to be 0.08.

74 ATOMIC AND MOLECULAR PHYSICS↗

Improvement of Vertical Diode Properties by N-type Plasma Doping for Low-Power Phase Change Non-Volatile Memory (NVM)

Using PH{sub 3} N-type plasma doing (PLAD), the device characteristics of high performance vertical switch diode for 50 nm phase-change NVM have been studied. Compared to the conventional beam line ion implantation, there are improvements of diode breakdown voltage (B.V.) and isolation B.V., respectively 20% and 41% by N-type PLAD doping due to the higher doping level and shallower profile in N+ region. It also shows excellent off-leakage properties less than 10 pA/cell without decreasing the Ion. From the results of this study, N-type PLAD has been demonstrated to be effective for vertical diode electrical properties as well as for high productivity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Erosion of Extraction Electrodes of Ion Sources due to Sputtering

The effects upon erosion due to implanted atoms in extraction electrodes of an ion source have been investigated through calculating the sputtering yields with a Monte Carlo simulation code, ACAT. The results obtained with ACAT have indicated that the sputtering yields of extraction electrodes are substantially affected by the retention of implanted atoms depending upon the mass ratio of electrode materials and extracted ions from the source plasma. The enhanced erosion takes place as the heavier ion beam species like phosphor is implanted into lighter electrode material like carbon. Additional mixing of materials arising from ion source operation, such as hot cathode materials evaporation onto a carbon extraction electrode, can shorten the lifetime of the extraction electrodes.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Quantum mechanical study of the coupling of plasmon excitations to atomic-scale electron transport

The coupling of optical excitation and electron transport through a sodium atom in a plasmonic dimer junction is investigated using time-dependent density functional theory. The optical absorption and dynamic conductance is determined as a function of gap size. Surface plasmons are found to couple to atomic-scale transport through several different channels including dipolar, multipolar, and charge transfer plasmon modes. These findings provide insight into subnanoscale couplings of plasmons and atoms, a subject of general interest in plasmonics and molecular electronics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Germanium-tin p-i-n photodetectors integrated on silicon grown by molecular beam epitaxy

GeSn heterojunction p-i-n diodes with a Sn content of 0.5% are grown with a special low temperature molecular beam epitaxy. The Sn incorporation in Ge is facilitated by a very low temperature growth step in order to suppress Sn surface segregation. Diodes with sharp doping transitions are realized as double mesa structures with a diameter from 1.5 up to 80 {mu}m. An optical responsivity of these GeSn diodes of 0.1 A/W at a wavelength of {lambda}=1.55 {mu}m is measured. In comparison with a pure Ge detector the optical responsivity is increased by factor of 3 as a result of Sn caused band gap reduction.

36 MATERIALS SCIENCE↗

Inter-ion coulomb interactions in a magneto-optical trap ion source

We have investigated the role played by inter-ion Coulomb interactions in a magneto-optical trap ion source (MOTIS). Using a Monte Carlo simulation accounting for all pair-wise ion-ion Coulomb interactions in the source, we have calculated the broadening of the transverse spatial and velocity distributions as well as the increase in emittance over a range of beam currents and extraction electric fields. Using a {sup 7}Li MOTIS, we have experimentally studied the broadening of the spatial distribution as a function of total beam current and extraction electric field by measuring the fraction of the beam current that passes through a 20 {mu}m diameter aperture. The Monte Carlo simulations agree well with the experimental results, indicating that such simulations capture the essential physics of the source. Our results show that while Coulomb interactions can cause a significant increase in emittance in some situations, it is possible to keep the effects to an acceptable level by suitable choice of extraction field and beam current. These considerations are essential to the process of optimizing MOTIS geometry and operating conditions for use in high-resolution focused ion beam applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Residual Stresses in DC cast Aluminum Billet: Neutron Diffraction Measurements and Thermomechanical Modeling

Thermally-induced residual stresses, generated during the industrial Direct Chill casting process of aluminum alloys, can cause both significant safety concerns as well as the formation of defects during down-stream processing. Although these thermally induced strains can be partially relieved by permanent deformation, cracks will be generated either during solidification (hot tears) or post-solidification cooling (cold cracks) when stresses exceed the deformation limit of the alloy. Furthermore, the thermally induced strains result in the presence of large internal stresses within the billet before further processing steps. Although numerical models have been previously developed to compute these residual stresses, most of the computations have been validated only against measured surface distortions. In the present work, the variation in residual elastic strains and stresses in the steady state regime of casting has been measured as a function of radial position using neutron diffraction in an AA6063 grain-refined cylindrical billet. These measurements have been carried out on the same billet section at Poldi at PSI-Villigen and at Salsa at ILL-Grenoble and compare favorably. The results are used to validate a thermo-mechanical finite element casting model and to assess the level of stored elastic energy within the billet.

36 MATERIALS SCIENCE↗

Dynamics of Molecules Adsorbed in Zeolitic Systems: Neutron Scattering and MD Simulation Studies

Zeolites represent a class of technologically important materials because of their characteristic properties of molecular sieving and catalysis, which makes them indispensable in the petroleum industries. While the catalytic properties depend upon many factors, a major role is played by the dynamics of hydrocarbon gases. In order to be able to tailor make these materials for use in industry for catalytic and sieving purposes, it is important to understand the dynamical properties of the guest molecules adsorbed in the zeolitic materials. It is of interest to study the effects of size and shape of guest molecules and also the host zeolitic structure, governing the diffusion mechanism of the adsorbed species. Here we report the results of Quasielastic Neutron Scattering (QENS) and classical molecular dynamics (MD) simulation studies of two hydrocarbons namely acetylene and propylene adsorbed in two structurally different zeolites Na-Y and ZSM-5.

36 MATERIALS SCIENCE↗

Electronic Conduction through Atomic Chains, Quantum Well and Quantum Wire

Charge transport is dynamically and strongly linked with atomic structure, in nanostructures. We report our ab-initio calculations on electronic transport through atomic chains and the model calculations on electron-electron and electron-phonon scattering rates in presence of random impurity potential in a quantum well and in a quantum wire. We computed synthesis and ballistic transport through; (a) C and Si based atomic chains attached to metallic electrodes, (b) armchair (AC), zigzag (ZZ), mixed, rotated-AC and rotated-ZZ geometries of small molecules made of 2S, 6C and 4H atoms attaching to metallic electrodes, and (c) carbon atomic chain attached to graphene electrodes. Computed results show that synthesis of various atomic chains are practically possible and their transmission coefficients are nonzero for a wide energy range. The ab-initio calculations on electronic transport have been performed with the use of Landauer-type scattering formalism formulated in terms of Grben's functions in combination with ground-state DFT. The electron-electron and electron-phonon scattering rates have been calculated as function of excitation energy both at zero and finite temperatures for disordered 2D and 1D systems. Our model calculations suggest that electron scattering rates in a disordered system are mainly governed by effective dimensionality of a system, carrier concentration and dynamical screening effects.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Calculations of the thermal conductivity of National Ignition Facility target materials at temperatures near 10 eV and densities near 10 g/cc using finite-temperature quantum molecular dynamics

Using quantum finite-temperature density functional theory molecular dynamics (QMD), we performed simulations of several important materials in the Inertial Confinement Fusion-National Ignition Facility nominal target designs, comprising various mixtures of proposed ablator materials (Be or CH) with the DT fuel. Simulations were done over a range of temperatures between 5 eV and 20 eV, at densities between 7.5 and {approx}12.5 g/cc. From the QMD trajectories, we calculated the electrical and thermal conductivity. We estimated the number of free electrons per atom by fitting the frequency-dependent electrical conductivity to the Drude formula. The thermal conductivity of the fuel increases with density but that of the ablator material is insensitive to modest density variations. We find that the thermal conductivity depends strongly on the ablator/fuel mix fraction but a Faber-Ziman interpolation scheme provides a reasonable approximation. We also compare our QMD results to the Hubbard and Lee-More models.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Point defect engineering strategies to suppress A-center formation in silicon

We investigate the impact of tin doping on the formation of vacancy-oxygen pairs (VO or A-centers) and their conversion to VO{sub 2} clusters in electron-irradiated silicon. The experimental results are consistent with previous reports that Sn doping suppresses the formation of the A-center. We introduce a model to account for the observed differences under both Sn-poor and Sn-rich doping conditions. Using density functional theory calculations, we propose point defect engineering strategies to reduce the concentration of the deleterious A-centers in silicon. We predict that doping with lead, zirconium, or hafnium will lead to the suppression of the A-centers.

36 MATERIALS SCIENCE↗

Zero field spin induced by strain and symmetry reduction semiconductors and their heterostructures

We present studies of the zero field spin splitting of conduction band induced by symmetry reducing strain. These studies are based on the relativistic exact exchange density functional theory. The first principle calculations reveal that the microscopic details of the crystal geometry influence the conduction band spin splitting. We propose a new effective Hamiltonian that accounts for these effects.

36 MATERIALS SCIENCE↗

Cohesion enhancing effect of magnesium in aluminum grain boundary: A first-principles determination

The effect of magnesium on grain boundary cohesion in aluminum was investigated by means of first-principles calculations using the Rice-Wang model [Rice and Wang, Mater. Sci. Eng. A 107, 23 (1989)]. It is demonstrated that magnesium is a cohesion enhancer with a potency of -0.11 eV/atom. It is further determined through electronic structure and bonding character analysis that the cohesion enhancing property of magnesium is due to a charge transfer mechanism which is unusually strong and overcomes the negative result of the size effect mechanism. Consistent with experimental results, this work clarifies the controversy and establishes that Mg segregation does not contribute to stress corrosion cracking in Al alloys.

36 MATERIALS SCIENCE↗

Compressibility and strength of nanocrystalline tungsten boride under compression to 60 GPa

The compression behavior and stress state of nanocrystalline tungsten boride (WB) were investigated using radial x-ray diffraction (RXRD) in a diamond-anvil cell under non-hydrostatic compression up to 60.4 GPa. The compression properties and stress state are analyzed using lattice strain theory. Experiments were conducted at beamline X17C of the National Synchrotron Light Source. The radial x-ray diffraction data yield a bulk modulus that is qualitatively consistent with density functional theory calculations and demonstrate that WB is a highly incompressible material. A maximum differential stress, t, of about 14 GPa can be supported by nanocrystalline WB at the highest pressure. This corresponds to about 5% of the shear modulus, G, which is smaller than the values of t/G ({approx}8%-10%) observed for BC{sub 2}N, B{sub 6}O, TiB{sub 2}, and {gamma}-Si{sub 3}N{sub 4} at high pressures. Thus, while WB is highly incompressible, its strength is relatively low at high pressures compared to other hard ceramics.

36 MATERIALS SCIENCE↗