Search NASA⌕ Search

SEARCH · Search NASA

Results for “Model development”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,639 records · Page 91

Work on power-plant (air) plumes involving remote sensing of SO2

Acquisition of air quality and concurrent meteorological data was used for dispersion model development and plant siting needs of the Maryland power plants. One of the major instruments in these studies was the Barringer correlation spectrometer, a remote sensor, using atmospherically scattered sunlight that was used to measure the total amount of SO2 in a cross section of the plume. Correlation spectrometer and its role in this measurement program are described.

White, C. L., Jr.↗

Photoelectrons in the upper atmosphere - A formulation incorporating effects of transport

A technique for solving the problem of photoelectron spatial transport and spectral degradation is presented. The developed model, which allows for a relatively complete description of the relevant transport and collisional physics, can be applied to study processes at either low or high altitude, and may be used to investigate interhemispheric transport. The technique involves dividing the spatial dimension into a set of discrete ordinates and calculating the photoelectron intensity for a specific energy at each point in space and at a set of angle points. The selected range of the energy spectrum was covered completely by a set of energy bins, and the photoelectron intensity in the highest energy bin was calculated first by assuming that the only source term was derived from photoionization. The method is similar to a method used in radiative transfer theory. Spatial and angular redistribution of electrons play a dominant role at heights above 400 km.

Prather, M. J.↗

An evaluation of low-cost payload carrier

Payload carrier designed for space vehicles is essentially cargo carrier that supports, positions, and protects various equipment and materials used in conducting experiments in weightless space environment. Proposed carrier entitled Materials Experiment Assembly II (MEA-II) is considered superior to previously developed models in size, weight, and cost to user. Structure is lightweight with insulated exterior and can be custom sized to meet user needs.

Yost, V. H.↗

The 737 aircraft flammability testing

The FAA requested approximately 20 component and full-scale tests in a 737 fuselage to provide validation data or indicate changes that need to be made to a fire math model (Dayton Aircraft Cabin Fire Model) developed for the FAA. Some preliminary tests were conducted to evaluate the adequacy of planned instrumentation. The objectives of the program were met in that it was verified that propagation of a fire could be determined from the sequential response of thermocouples located on a test specimen(such as a seat), and continuous weighing of the specimen during the test was accomplished. Two differenct techniques for measuring smoke density were found to be comparable.

Bricker, R. W.↗

Two measures of performance in a peg-in-hole manipulation task with force feedback

The results are described from two manipulators on a peg-in-hole task, which is part of a continued effort to develop models for human performance with remote manipulators. Task difficulty is varied by changing the diameter of the peg to be inserted in a 50 mm diameter hole. An automatic measuring system records the distance between the tool being held by the manipulator and the receptacle into which it is to be inserted. The data from repeated insertions are processed by computer to determine task times, accumulated distances, and trajectories. Experiments with both the MA-11 cable-connected master-slave manipulator common to hot cell work and the MA-23 servo-controlled manipulator (with and without force feedback) are described. Comparison of these results with previous results of the Ames Manipulator shows that force feedback provides a consistent advantage.

Hill, J. W.↗

Variability of annoyance response due to aircraft noise

An investigation was conducted to study the variability in the response of subjects participating in noise experiments. This paper presents a description of a model developed to include this variability which incorporates an aircraft-noise adaptation level or an annoyance calibration for each individual. The results indicate that the use of an aircraft-noise adaption level improved prediction accuracy of annoyance responses (and simultaneously reduced response variation).

Dempsey, T. K.↗

The investigation of advanced remote sensing techniques for the measurement of aerosol characteristics

Advanced remote sensing techniques and inversion methods for the measurement of characteristics of aerosol and gaseous species in the atmosphere were investigated. Of particular interest were the physical and chemical properties of aerosols, such as their size distribution, number concentration, and complex refractive index, and the vertical distribution of these properties on a local as well as global scale. Remote sensing techniques for monitoring of tropospheric aerosols were developed as well as satellite monitoring of upper tropospheric and stratospheric aerosols. Computer programs were developed for solving multiple scattering and radiative transfer problems, as well as inversion/retrieval problems. A necessary aspect of these efforts was to develop models of aerosol properties.

Deepak, A.↗

Optimization of MLS receivers for multipath environments

The angle tracking problems in microwave landing system receivers along with a receiver design capable of optimal performance in the multipath environments found in air terminal areas were studied. Included were various theoretical and evaluative studies like: (1) signal model development; (2) derivation of optimal receiver structures; and (3) development and use of computer simulations for receiver algorithm evaluation. The development of an experimental receiver for flight testing is presented. An overview of the work and summary of principal results and conclusions are reported.

Mcalpine, G. A.↗

LACIE (Large Area Crop Inventory Experiment) Programme

Large Area Crop Inventory Experiment was a three year experiment conducted jointly by the United States Department of Agriculture, NASA, and NOAA (National Oceanic and Atmospheric Administration) to determine if global wheat production can be forecast from LANDSAT data to within 90% of actual yield for each observed 9 years out of 10. Data for the third crop year (1976-1977) was compiled. The proportional area of cultivated land devoted to wheat was estimated based on a statistical sampling of LANDSAT data. Yield is presently estimated by NOAA using regression models developed from historical weather and yield information. Results are discussed.

Whitman, R. I.↗

Enclosure fire dynamics model

A practical situation of an enclosure fire is presented and why the need for a fire dynamic model is addressed. The difficulties in establishing a model are discussed, along with a brief review of enclosure fire models available. The approximation of the practical situation and the model developed are presented.

Bellan, J.↗

Spatially resolved infrared observations of Saturn. I - Equatorial limb scans at 20 microns

Infrared drift scans of areas near the equator of Saturn are analyzed which were made through narrow-band filters with central wavelengths of 17.8, 19.7, and 22.7 microns. The results are compared with several different models of the atmosphere of Saturn based on the planet's thermal IR emission spectrum. It is found that the model of Tokunaga and Cess (1977) is the best of the published models as a representation of the equatorial atmosphere of Saturn and that a model developed by Gautier et al. (1977) is also quite acceptable in view of the experimental uncertainties.

Caldwell, J.↗

Statistical sampling analysis for stratospheric measurements from satellite missions

Earth orbiting satellite experiments can be designed to measure stratospheric constituents such as ozone by utilizing remote sensing techniques. Statistical analysis techniques, mission simulation and model development have been utilized to develop a method for analyzing various mission/sensor combinations. Existing and planned NASA satellite missions such as Nimbus-4 and G, and Stratospheric Aerosol and Gas Experiment-Application Explorer Mission (SAGE-AEM) have been analyzed to determine the ability of the missions to adequately sample the global field.

Drewry, J. W.↗

A correlative study between analysis and experiment on the fracture behavior of graphite/epoxy composites

The paper compares the fracture behavior of a composite material by using the analytical models of Waddoups et al. (1971), Whitney and Nuismer (1974, 1975), and Snyder and Cruse (1975) with experimental results from tests performed on center-notched tensile strips. Laminate configurations of (0 deg)8s, (0 deg/90 deg)4s, (+ and -45 deg)4s, and (0 deg/+ and -45 deg/0 deg)2s from T300/934 graphite/epoxy are tested. These particular configurations are used so that the effect of various degrees of anisotropy can be studied. The procedure adopted uses the results from one test for crack size aspect ratio to predict the results of tests of other aspect ratios. For those methods that use a characteristic dimension, predictions are made by assuming the magnitude of this dimension to be constant. The validity of this assumption for a laminate is assessed by comparing predicted and experimental results. Analytical models using a characteristic dimension are compared to the model developed by Cruse (1973).

Yeow, Y. T.↗

Mean sea level determination from satellite altimetry

The primary experiment on the Geodynamics Experimental Ocean Satellite-3 (GEOS-3) is the radar altimeter. This experiment's major objective is to demonstrate the utility of measuring the geometry of the ocean surface; i.e., the geoid. Results obtained from this experiment so far indicate that the planned objectives of measuring the topography of the ocean surface with an absolute accuracy of + or - 5 m can be met and perhaps exceeded. The GEOS-3 satellite altimeter measurements have an instrument precision in the range of + or - 25 cm to + or - 50 cm when the altimeter is operating in the 'short pulse' mode. After one year's operations of the altimeter, data from over 5000 altimeter passes have been collected. With the mathematical models developed and the altimeter data presently available, mapping of local areas of ocean topography has been realized to the planned accuracy levels and better. This paper presents the basic data processing methods employed and some interesting results achieved with the early data. Plots of mean sea surface heights as inferred by the altimeter measurements are compared with a detailed 1 by 1 deg gravimetric geoid.

Kahn, W. D.↗

On solar cosmic rays

The report summarizes the major results obtained over the last four years in the following areas: (1) transport in interplanetary space which includes solar particle observations combined with theoretical efforts to develop models which simulate the dynamics of the event; (2) transport in the solar corona and release of particles in the interplanetary medium; and (3) characteristics of source spectra and acceleration models. Modelling the propagation of solar cosmic rays through interplanetary space and establishing the magnitude and the radial and energy dependence of the diffusion coefficient K are considered. An important result due to statistical observation is that the coronal propagation must be independent of or weakly dependent on both rigidity and energy. Increasing evidence is found for prolonged injection at the sun.

Van Hollebeke, M. A. I.↗

Geophysics of Mars

A physical model of Mars is presented on the basis of light-scattering observations of the Martian atmosphere and surface and interior data obtained from observations of the geopotential field. A general description of the atmosphere is presented, with attention given to the circulation and the various cloud types, and data and questions on the blue haze-clearing effect and the seasonal darkening wave are summarized and the Mie scattering model developed to explain these observations is presented. The appearance of the planet from earth and spacecraft through Mariner 9 is considered, and attention is given to the preparation of topographical contour maps, the canal problem and large-scale lineaments observed from Mariner 9, the gravity field and shape of the planet and the application of Runcorn's geoid/convection theory to Mars. Finally, a summary of Viking results is presented and their application to the understanding of Martian geophysics is discussed.

Wells, R. A.↗

Mathematical modeling of moving boundary problems in thermal energy storage

The capability for predicting the performance of thermal energy storage (RES) subsystems and components using PCM's based on mathematical and physical models is developed. Mathematical models of the dynamic thermal behavior of (TES) subsystems using PCM's based on solutions of the moving boundary thermal conduction problem and on heat and mass transfer engineering correlations are also discussed.

Solomon, A. D.↗