Search NASA⌕ Search

SEARCH · Search NASA

Results for “Nuclear structure data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,639 records · Page 91

Structure and dynamics of open-shell nuclei from spherical coupled-cluster theory

We extend the spherical coupled-cluster ab initio method for open-shell nuclei where two nucleons are removed from a shell subclosure. Following the recent implementation of the two-particle-attached approach [Phys. Rev. C 110, 044306 (2024)], we focus on the two-particle-removed method. Using the equations-of-motion framework, we address both nuclear structure and dipole response functions by coupling coupled-cluster theory with the Lorentz integral transform technique. We perform calculations using chiral interactions, including three-nucleon forces, and estimate many-body uncertainties by comparing different coupled-cluster truncation schemes. Here, we validate our approach by studying ground-state energies, excited states, and electric dipole polarizabilities in the oxygen and calcium isotopic chains. For binding energies and selected low-lying excited states, we achieve an accuracy comparable to that of the established closed-shell coupled-cluster theory and generally agree with experiment. Finally, we underestimate experimental data for electric dipole polarizabilities, particularly in calcium isotopes.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

MINING PROCESS AND PRODUCT INFORMATION FROM PRESSURE FLUCTUATIONS WITHIN A FUEL PARTICLE COATER

The Next Generation Nuclear Power (NGNP) Fuel Development and Qualification Program included the design, installation, and testing of a 6-inch diameter nuclear fuel particle coater to demonstrate quality TRISO fuel production on a small industrial scale. Scale-up from the laboratory-scale coater faced challenges associated with an increase in the kernel charge mass, kernel diameter, and a redesign of the gas distributor to achieve adequate fluidization throughout the deposition of the four TRISO coating layers. TRISO coatings are applied at very high temperatures in atmospheres of dense particulate clouds, corrosive gases, and hydrogen concentrations over 45% by volume. The severe environment, stringent product and process requirements, and the fragility of partially-formed coatings limit the insertion of probes or instruments into the coater vessel during operation. Pressure instrumentation were installed on the gas inlet line and exhaust line of the 6-inch coater to monitor the bed differential pressure and internal pressure fluctuations emanating from the fuel bed as a result of bed and gas “bubble” movement. These instruments are external to the particle bed and provide a glimpse into the dynamics of fuel particle bed during the coating process and data that could be used to help ascertain the adequacy of fluidization and, potentially, the dominant fluidization regimes. Pressure fluctuation and differential pressure data are not presently useful as process control instruments, but data suggest a link between the pressure signal structure and some measurable product attributes that could be exploited to get an early estimate of the attribute values.

42 ENGINEERING↗

MINING PROCESS AND PRODUCT INFORMATION FROM PRESSURE FLUCTUATIONS WITHIN A FUEL PARTICLE COATER

The Next Generation Nuclear Power/Advanced Gas Reactor (NGNP/AGR) Fuel Development and Qualification Program included the design, installation, and testing of a 6-inch diameter nuclear fuel particle coater to demonstrate quality TRISO fuel production on a small industrial scale. Scale-up from the laboratory-scale coater faced challenges associated with an increase in the kernel charge mass, kernel diameter, and a redesign of the gas distributor to achieve adequate fluidization throughout the deposition of the four TRISO coating layers. TRISO coatings are applied at very high temperatures in atmospheres of dense particulate clouds, corrosive gases, and hydrogen concentrations over 45% by volume. The severe environment, stringent product and process requirements, and the fragility of partially-formed coatings limit the insertion of probes or instruments into the coater vessel during operation. Pressure instrumentation were installed on the gas inlet line and exhaust line of the 6-inch coater to monitor the bed differential pressure and internal pressure fluctuations emanating from the fuel bed as a result of bed and gas “bubble” movement. These instruments are external to the particle bed and provide a glimpse into the dynamics of fuel particle bed during the coating process and data that could be used to help ascertain the adequacy of fluidization and, potentially, the dominant fluidization regimes. Pressure fluctuation and differential pressure data are not presently useful as process control instruments, but data suggest a link between the pressure signal structure and some measurable product attributes that could be exploited to get an early estimate of the attribute values.

42 ENGINEERING↗

Benchmark eA generator for leptoproduction in high-energy lepton-nucleus collisions

The upcoming electron-ion collider (EIC) will address several outstanding puzzles in modern nuclear physics. Topics such as the partonic structure of nucleons and nuclei, the origin of their mass and spin, among others, can be understood via the study of high-energy electron-proton (ep) and electron-nucleus (eA) collisions. Achieving the scientific goals of the EIC will require a novel electron-hadron collider and detectors capable to perform high-precision measurements but also dedicated tools to model and interpret the data. To aid in the latter, we present a general-purpose e A Monte Carlo generator—BeAGLE. In this paper, we provide a general description of the models integrated into BeAGLE, applications of BeAGLE in eA physics, implications for detector requirements at the EIC, and the tuning of the parameters in BeAGLE based on available experimental data. Specifically, we focus on a selection of model and data comparisons in particle production in both ep and eA collisions, where baseline particle distributions provide essential information to characterize the event. In addition, we investigate the collision geometry determination in eA collisions, which could be used as an experimental tool for varying the nuclear density.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Evaluation of Candidate In-Pile Thermal Conductivity Techniques

Thermophysical properties of materials must be known for proper design, test, and application of new fuels and structural properties in nuclear reactors. In the case of nuclear fuels during irradiation, the physical structure and chemical composition change as a function of time and position within the rod. Typically, thermal conductivity changes, as well as other thermophysical properties being evaluated during irradiation in a materials and test reactor, are measured out-of-pile in “hot-cells.” Repeatedly removing samples from a test reactor to make out-of-pile measurements is expensive, has the potential to disturb phenomena of interest, and only provide understanding of the sample's end state at the time each measurement is made. There are also limited thermophysical property data for advanced fuels. Such data are needed for the development of next generation reactors and advanced fuels for existing nuclear plants. Having the capacity to effectively and quickly characterize fuels and material properties during irradiation has the potential to improve the fidelity of nuclear fuel data and reduce irradiation testing costs.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Nuclear Spins and Moments of Ga Isotopes Reveal Sudden Structural Changes between N=40 and N=50

Collinear laser spectroscopy was performed on Ga (Z=31) isotopes at ISOLDE, CERN. A gas-filled linear Paul trap (ISCOOL) was used to extend measurements towards very neutron-rich isotopes (N=36-50). A ground state (g.s.) spin I=1/2 is measured for {sup 73}Ga, being near degenerate with a 3/2{sup -} isomer (75 eV < or approx. E{sub ex} < or approx. 1 keV). The {sup 79}Ga g.s., with I=3/2, is dominated by protons in the {pi}f{sub 5/2} orbital and in {sup 81}Ga the 5/2{sup -} level becomes the g.s. The data are compared to shell-model calculations in the f{sub 5/2}pg{sub 9/2} model space, calling for further theoretical developments and new experiments.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Density matrix renormalization group description of the island of inversion isotopes F 28 – 33

Recent experiments have confirmed that the neutron-rich isotopes 28,29 F belong to the so-called island of inversion (IOI), a region of the nuclear chart around Z = 10 and N = 20 where nuclear structure deviates from the standard shell model predictions due to deformation and continuum effects. However, while the general principles leading to the IOI are relatively well understood, the details of the low-lying structure of the exotic fluorine isotopes 28–33 F are basically unknown. In this study, we perform large-scale shell model calculations including continuum states to investigate the properties of the neutron-rich isotopes 25–33 F, from a core of 24 O and using an effective two-body interaction with a small number of adjustable parameters in the central and tensor channels. We develop two models adjusted on experimentally confirmed states in 25,26 O and 25–27 F based on different assumptions concerning the positions of the neutron 0d 3/2 and 1p 3/2 shells, and solve the many-body problem using the density matrix renormalization group (DMRG) method for open quantum systems in an sd–fp model space. We obtain the first detailed spectroscopy of 25–33F in the continuum and show how the interplay between continuum effects and deformation explains the recent data on 28,29 F. Several deformed one- and two-neutron halo states are predicted in 29,31 F, and we provide some information about the possible structure of the heaviest fluorine isotopes. We also suggest several experimental studies of interest to constraint models and test the present predictions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Quasicontinuum γ decay of Zr 91 , 92 : Benchmarking indirect ( n , γ ) cross section measurements for the s process

Here, nuclear level densities (NLDs) and γ-ray strength functions (γSFs) have been extracted from particle-γ coincidences of the 92 Zr(p,p´γ) 92 Zr and 92 Zr (p,dγ) 91 Zr reactions using the Oslo method. The new 91,92 Zr γSF data, combined with photonuclear cross sections, cover the whole energy range from Eγ ≈ 1.5 MeV up to the giant dipole resonance at Eγ ≈ 17 MeV. The wide-range γSF data display structures at Eγ ≈ 9.5 MeV, compatible with a superposition of the spin-flip M1 resonance and a pygmy E1 resonance. Furthermore, the γSF shows a minimum at Eγ ≈ 2–3 MeV and an increase at lower γ-ray energies. The experimentally constrained NLDs and γSFs are shown to reproduce known (n,γ) and Maxwellian-averaged cross sections for 91,92 Zr using the TALYS reaction code, thus serving as a benchmark for this indirect method of estimating (n,γ) cross sections for Zr isotopes.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Analyzing Malaysians’ perception of risk in developing radiological and nuclear crisis communication framework

Crisis communication is an indicator of a sustaining public normalcy that serves to control and decrease any untoward situations during disasters’ meltdown. Prior findings highlighted that 25.85 percent of arising organizational disputes can be resolved using public announcements and an enhancement of public awareness through avoiding related dissatisfactions, disorders and untoward circumstances during radiation and nuclear emergencies. Hence, in this paper, we are interrogating Malaysians on their perception of risk regarding to radiation and nuclear disasters and emergencies. The principal aim is to identify the relationship between the IAEA’s initiated risk perception characteristics and the content of the respective public acceptance reports. Those relationships are described and analyzed into a network diagram using the ATLAS.ti software consisting of Clustering and C-Coefficient analyses. This diagram identifies the main variables relating to significant characteristics of risk perception. Future studies should further evaluate the intensity of public opinion against the suggested constructs of executing a thorough and structured risk management mechanism, to advance public trust as well as crisis communication.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

CHRONIC ZINC SCREENING WATER EFFECT RATIO FOR THE H-12 OUTFALL, SAVANNAH RIVER SITE

In response to proposed Zn limits for the NPDES outfall H-12, a Zn screening Water Effects Ratio (WER) study was conducted to determine if a full site-specific WER is warranted. Using standard assumptions for relating the lab results to the stream, the screening WER data were consistent with the proposed Zn limit and suggest that a full WER would result in a similar limit. Addition of a humate amendment to the outfall water reduced Zn toxicity, but the toxicity reduction was relatively small and unlikely to impact proposed Zn limits. The screening WER data indicated that the time and expense required to perform a full WER for Zn is not warranted.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

On the thermal oxidation of nuclear graphite relevant to high-temperature gas cooled reactors

Thermal oxidation of nuclear graphite components is highly undesirable because it can cause structural and property degradation that negatively affect a reactor's intended operation. In this work, the body of knowledge of nuclear graphite oxidation is highlighted, including when O 2 , H 2 O, and/or CO 2 are the oxidant. Oxidation conditions relevant to high-temperature gas-cooled reactors (i.e., when oxidation could occur either as an acute or chronic phenomenon) are emphasized. Here, the objective is to summarize graphite oxidation data in a practical and accessible way to inform future research and regulatory requirements. Although each grade of nuclear graphite is different, the oxidation mechanism has underlying commonalities. Although oxidation behavior is grade dependent, the general temperature dependence is well described by a sequence of elementary steps which become rate limiting. Because the regime transition temperature depends on sample microstructure, size, and oxidant supply rate, extrapolating results beyond the experimental range should be done cautiously. Gravimetric oxidation rate measurements generally replicate well. However, caution must be exercised when rates are estimated by other methods or for samples that deviate significantly in size. Air oxidation data for IG-110, NBG-18, and PCEA graphite is critically reviewed to emphasize this point. Despite the amount of experimental data, gaps remain. Sample size and shape effects are not fully explained. Data on the oxidant penetration depth are insufficient. Analytical assessments demonstrate that lower temperature oxidation does not necessarily imply that oxidation is uniform throughout the bulk. Oxidation occurs faster at higher temperature but is more localized to the exposed surface. Paradoxically, at equal mass loss percentage, low temperature oxidation leads to greater property degradation than at high temperature. The isolated effect of oxidation is important; however, a gap remains in the systematic understanding of any potential effect of neutron irradiation on graphite structure and reactivity.

36 MATERIALS SCIENCE↗

Structural Environment of Nitrogen in N-doped Rutile TiO2(110)

We employ x-ray photoelectron spectroscopy (XPS), reflection high-energy electron diffraction (RHEED) and nuclear reaction analysis (NRA) to characterize the concentration-dependent structural properties of nitrogen doping into rutile TiO2. High quality N-doped TiO2 were prepared on rutile single crystal TiO2(110) substrates using plasma-assisted molecular beam epitaxy with an electron cyclotron resonance (ECR) plasma and Ti effusive sources. Films with N dopant concentrations at or below 2 at.% exhibited predominately substitutional doping based on NRA data, whereas films with concentrations above this limit resulted in little or no substitutional N and surfaces rich in Ti3+. The binding energy of the N 1s feature in XPS did not readily distinguish between these two extremes in N-doping, rendering features within 0.4 eV of each other and similar peak profiles. Although widely used to characterize the state of N in anion-doped TiO2 materials, we find that XPS is unsuitable for this task.

08 HYDROGEN↗

Machine learning for fundamental spectroscopic and thermodynamic data of actinides and lanthanides

Accurately modeling optical spectra with absolute radiometric intensities is vital for nuclear forensics applications that depend on characterizing optical emissions from energetic nuclear phenomena. This requires precise knowledge of the individual atomic transition probabilities, known as Einstein A-coefficients, for each emission line. Obtaining these values theoretically or experimentally is often impractical due to the complex electronic structures and the number of transitions involved in atoms relevant to nuclear applications. In this study, we explore the use of machine learning to predict the Einstein A coefficients for atomic transitions. Seven models were evaluated that ranged from deep learning to decision tree algorithms, and found that gradient boosting performed best, specifically the Extreme Gradient Boosting (XGB) architecture, achieving a precision of 86% across transitions of 36 elements. Furthermore, the model was cross-validated using published transition probabilities reported in the literature and applied to estimate Pu plasma temperatures from a previous experiment conducted at Savannah River National Laboratory.

Atomic spectroscopy↗

MARMOT update for oxide fuel modeling

This report summarizes the lower-length-scale research and development progresses in FY16 at Idaho National Laboratory in developing mechanistic materials models for oxide fuels, in parallel to the development of the MARMOT code which will be summarized in a separate report. This effort is a critical component of the microstructure based fuel performance modeling approach, supported by the Fuels Product Line in the Nuclear Energy Advanced Modeling and Simulation (NEAMS) program. The progresses can be classified into three categories: 1) development of materials models to be used in engineering scale fuel performance modeling regarding the effect of lattice defects on thermal conductivity, 2) development of modeling capabilities for mesoscale fuel behaviors including stage-3 gas release, grain growth, high burn-up structure, fracture and creep, and 3) improved understanding in material science by calculating the anisotropic grain boundary energies in UO$_2$ and obtaining thermodynamic data for solid fission products. Many of these topics are still under active development. They are updated in the report with proper amount of details. For some topics, separate reports are generated in parallel and so stated in the text. The accomplishments have led to better understanding of fuel behaviors and enhance capability of the MOOSE-BISON-MARMOT toolkit.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Toward High Fidelity LES Simulations of 5 x 5 PWR Fuel Bundle with Mixing Vane

The present work illustrates one example of a computational fluid dynamics (CFD) application in the nuclear engineering field. Since CFD is one of the most powerful tools available at the actual state of the art that could in principle help and assist the design process, a compromise should be established between the accuracy of the CFD numerical model (RANS - LES - DNS) and the computational cost of the simulations. In this spirit, this work will present the computational results from two different CFD model categories, Large Eddy Simulations (LES) and Reynolds-averaged Navier-Stokes (RANS) models. Both treat the flow turbulence issue in two separate ways, which differ mostly in the resolution of the turbulence statistics and the computational cost. The single-phase hydraulic problem presented involves the steady-state turbulent flow field modelling and resolution around a scaled PWR mixing vane grid, designed by Westinghouse and tested by Texas A and M University. The role of the mixing vane/spacer grid is to enhance the turbulent mixing and hence heat transfer of the core coolant around fuel bundles, thus increasing the departure of nucleate boiling-critical heat flux (DNB-CHF) point, as well as important structural functions for the rods bundles. The authors numerically studied the flow field characteristics at the region downstream of the spacer grids and validated their results to particle imagery velocimetry (PIV) measurements. Dominguez and Hassan performed two-dimensional time resolved PIV (TR-PIV) measurements within a 5 x 5 PWR rod bundle with spacer-grids that utilized a matching index of refraction (MIR) approach. Their averaged data showed a rather uniform direction velocity profile after the spacer grid while the downstream illustrated a no slip wall profile. The available PIV flow field experimental results from Texas A and M show complex structures of the flow field downstream the mixing vanes with the formation of secondary flows that tend to enhance the turbulent heat transfer, due to the mixing vanes geometry itself. Computational results will be validated with the available experimental data.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Quadrupole splittings in the near-infrared spectrum of 14 NH 3

Sub-Doppler, saturation dip, spectra of lines in the v 1 + v 3 , v 1 + 2v 4 and v 3 + 2v 4 bands of 14 NH 3 have been measured by frequency comb-referenced diode laser absorption spectroscopy. The observed spectral line widths are dominated by transit time broadening, and show resolved or partially-resolved hyperfine splittings that are primarily determined by the 14 N quadrupole coupling. Modeling of the observed line shapes based on the known hyperfine level structure of the ground state of the molecule shows that, in nearly all cases, the excited state level has hyperfine splittings similar to the same rotational level in the ground state. The data provide accurate frequencies for the line positions and easily separate lines overlapped in Doppler-limited spectra. The observed hyperfine splittings can be used to make and confirm rotational assignments and ground state combination differences obtained from the measured frequencies are comparable in accuracy to those obtained from conventional microwave spectroscopy. Furthermore, several of the measured transitions do not show the quadrupole hyperfine splittings expected based on their existing rotational assignments. Either the assignments are incorrect or the upper levels involved are perturbed in a way that affects the nuclear hyperfine structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Cytosolic expression, solution structures, and molecular dynamics simulation of genetically encodable disulfide‐rich de novo designed peptides

Abstract Disulfide‐rich peptides represent an important protein family with broad pharmacological potential. Recent advances in computational methods have made it possible to design new peptides which adopt a stable conformation de novo. Here, we describe a system to produce disulfide‐rich de novo peptides using Escherichia coli as the expression host. The advantage of this system is that it enables production of uniformly 13 C‐ and 15 N‐labeled peptides for solution nuclear magnetic resonance (NMR) studies. This expression system was used to isotopically label two previously reported de novo designed peptides, and to determine their solution structures using NMR. The ensemble of NMR structures calculated for both peptides agreed well with the design models, further confirming the accuracy of the design protocol. Collection of NMR data on the peptides under reducing conditions revealed a dependency on disulfide bonds to maintain stability. Furthermore, we performed long‐time molecular dynamics (MD) simulations with tempering to assess the stability of two families of de novo designed peptides. Initial designs which exhibited a stable structure during simulations were more likely to adopt a stable structure in vitro , but attempts to utilize this method to redesign unstable peptides to fold into a stable state were unsuccessful. Further work is therefore needed to assess the utility of MD simulation techniques for de novo protein design.

Buchko, Garry W.↗