Results for “Profiling optimization” — Page 91

DOE OSTI2017

Trak Investigation of Focusing Electrode Geometries for the DARHT Axis-I Diode

An investigation was carried out on the effects of different cathode shroud geometries of the DARHT Axis-1 diode using the Trak ray tracing software. Pierce angles of 20, 30, 45, 60, and 67.5 degrees were investigated. For each geometry the current density with respect to radial position will be presented as it evolves in the longitudinal direction. In addition the emittances for each geometry are compared and this information is used to determine the optimal geometry from the selected angles. These results are compared to the baseline geometry currently employed at DARHT of a simple 2.5mm recessed velvet cathode. Of the selected angles it was found that 45 degrees produced the lowest normalized emittance value, whereas 60 degrees produced the most uniform current density profile at 1cm away from the emission surface. For the purpose of this investigation the effects of the bucking coil and solenoid around the hollow anode of the DARHT Axis I injector are neglected.

47 OTHER INSTRUMENTATION↗

DOE OSTI2021

Scalable Techniques for Stochastic Power Flow Problems (Final Report)

The proposed research focuses on developing scalable algorithms for two-stage security-constrained OPF problems with AC power flow constraints, a class of problems complicated by (i) scale arising from a scenario representation; and (ii) the presence of nonlinearity, nonconvexity, and possibly second-stage discreteness or complementarity. Unfortunately, most existing solvers cannot contend with both challenges simultaneously; accordingly, the proposed research focuses on developing solution techniques that can both scale with the number of scenarios and contend with nonconvexity and second-stage complementarity. We consider three avenues for addressing such problems: (i) Variable sample-size SQP (VS-SQP) methods that combine sparse Quasi-Newton updates with a scalable variance-reduced stochastic gradient scheme for stochastic QP subproblems, allowing for contending with second-stage complementarity via regularization; (ii) Variable sample-size stochastic Interior-point (VS-sIP) schemes that propose a sampling-based regularized (to allow for contending with complementarity) interior-point schemes in which a Schur-complement technique is employed for decomposing the Newton direction computation step; (iii) Variable sample-size tractable ADMM (VS-tADMM) schemes combine variable sample-sizes with carefully designed techniques for resolving each of the nonconvex updates (by leveraging the QCQP structures). We intend to compare the three schemes using performance profiles in terms of solution quality, scalability, etc. and then select one scheme which will then be developed and further refined in Python for purposes of the GO competition.

42 ENGINEERING↗

NASA NTRS1994

Thermal analysis of a functionally graded material subject to a thermal gradient using the boundary element method

The boundary element method is utilized in this study to conduct thermal analysis of functionally graded composites, materials in which the internal microstructure or properties are explicitly tailored in order to obtain an optimal response, on the micromechanical (constituent) scale. A unique feature of the boundary element formulations used here is the use of circular shape functions to convert the two-dimensional integrations of the composite fibers to one dimensional integrations. Using the computer code BEST-CMS, the through the thickness temperature profiles are computed for a representative material with varying numbers of fibers and fiber spacing in the thickness direction. The computed temperature profiles are compared to those obtained using an alternate analytical theory which explicitly couples the heterogeneous microstructure to the global analysis. The boundary element results compared favorably to the analytical calculations, with discrepancies that are explainable based on the boundary element formulation. The results serve both to demonstrate the ability of the boundary element method to analyze these types of materials, and to verify the accuracy of the analytical theory.

Goldberg, Robert K.↗

NASA NTRS2010

Predictability of Top of Descent Location for Operational Idle-Thrust Descents

To enable arriving aircraft to fly optimized descents computed by the flight management system (FMS) in congested airspace, ground automation must accurately predict descent trajectories. To support development of the trajectory predictor and its uncertainty models, commercial flights executed idle-thrust descents at a specified descent speed, and the recorded data included the specified descent speed profile, aircraft weight, and the winds entered into the FMS as well as the radar data. The FMS computed the intended descent path assuming idle thrust after top of descent (TOD), and the controllers and pilots then endeavored to allow the FMS to fly the descent to the meter fix with minimal human intervention. The horizontal flight path, cruise and meter fix altitudes, and actual TOD location were extracted from the radar data. Using approximately 70 descents each in Boeing 757 and Airbus 319/320 aircraft, multiple regression estimated TOD location as a linear function of the available predictive factors. The cruise and meter fix altitudes, descent speed, and wind clearly improve goodness of fit. The aircraft weight improves fit for the Airbus descents but not for the B757. Except for a few statistical outliers, the residuals have absolute value less than 5 nmi. Thus, these predictive factors adequately explain the TOD location, which indicates the data do not include excessive noise.

Stell, Laurel L.↗

NASA NTRS2018

A Singular Value Decomposition Framework for Retrievals with Vertical Distribution Information from Greenhouse Gas Column Absorption Spectroscopy Measurements

We review the singular value decomposition (SVD) framework and use it for quantifying and discerning vertical information in greenhouse gas retrievals from column integrated absorption measurements. While the commonly used traditional Bayesian optimal estimation (OE) assumes a prior distribution in order to regularize the inversion problem, the SVD approach identifies principal components that can be retrieved from the measurement without explicitly specifying a prior mean and prior covariance matrix. We review the SVD method, explicitly recognize the use of an uninformative prior and show it to incur no bias from the choice of the prior. We also make the connection between the SVD method and the pseudo-inverse, which makes it more intuitive and easy to understand. We illustrate the use of the SVD method on an integrated path differential absorption CO2 lidar measurement model and verify our derivations and bias-free properties versus optimal estimation using numerical simulations. In contrast, traditional OE retrievals exhibit bias when the prior mean used in the retrieval differs from the true mean. Hence, the SVD method is particularly useful for situations in which knowledge of the prior mean and prior covariance of the true state (e.g., greenhouse gas profiles) is inadequate.

Ramanathan, Anand K.↗

NASA NTRS2024

Space Algae-2 Ground and Lunar Analog Studies in Preparation for Long-Duration Propagation of Cyanobacteria in Spaceflight

There are numerous applications for microalgae in spaceflight missions and on Earth, such as oxygen production, carbon dioxide removal, nutrition, wastewater processing, and biofuel production. Space Algae-2 aims to test the genetic stability of Arthrospira platensis, commonly known as spirulina, during six-months of continuous culture on the International Space Station. Long-duration exposure to ionizing radiation and microgravity may impact growth, nutrient composition, and genetic stability. The high protein, vitamin, antioxidant content, and radiation resistance make spirulina a promising candidate for bioregenerative life support systems. A concept of operations was developed to grow and harvest algal biomass in space. Preflight testing experiments optimized conditions for an extended growth period in a gas permeable bioreactor bag. Preflight and post-harvest storage methods were developed in addition to a novel cryopreservation method. After sample return, multi-omics analysis will be conducted to determine the mutation rate, gene expression, and the protein and metabolite profile. The concept of operations for Space Algae-2 was tested during a lunar mission simulation within a semi-controlled environment. During a six-day lunar analog mission at the Hawai’i Space Exploration Analog and Simulation (HI-SEAS) A. platensis was successfully grown using flight-like hardware. The cyanobacteria were harvested and used to supplement bread as an example of spirulina biomass utilization. Overall, the data collected from Space Algae-2 will inform potential bioengineering of spirulina for space and terrestrial applications.

Algae↗

NASA NTRSDate not supplied

Phase-Free Orbital Element Model Designed to Enable Rapid Assessment of Eclipse and Radiation Profiles for Low-Thrust Spiral Transfers Around the Earth

The Gateway Power and Propulsion Element (PPE) will be the first low-thrust solar electric ion propulsion mission to transfer from a highly elliptical Earth-bound orbit to a southern near-rectilinear halo orbit (NRHO) at the Earth-Moon L2 point. Due to the low thrust nature of the transfer orbit, it is desirable to locate viable trajectories that minimize the time spent in the Van Allen radiation belts to reduce solar array degradation and keep radiation dosages below design limits. In addition to radiation, low thrust trajectories which spiral around the Earth will pass through at least one or more seasons of Earth eclipses. The solar electric propulsion system relies on sunlight to generate the power necessary to operate the ion thrusters. Therefore, it is advantageous to find trajectories which also minimize the amount of time spent in eclipse and avoid excessive battery draw-down periods. We present an analytical method which rapidly approximates low-thrust spiral trajectories, fit to high-fidelity simulated data and parameterized to allow for changes in vehicle thrust characteristics, that is post-processed to determine eclipse profiles and time spent in the belts using a novel approach that estimates the geometry of the belts using a first-order dipole approximation of the Earth’s magnetic field. This method can be used to find satisfactory launch dates and orbit orientations that can serve as initial guesses when optimizing such missions in high-fidelity software.

low thrust trajectory design↗

NASA NTRSDate not supplied

Space Algae-2 Ground and Lunar Analog Studies in Preparation for Long-Duration Propagation of Cyanobacteria in Spaceflight

There are numerous applications for microalgae in spaceflight missions and on Earth, such as oxygen production, carbon dioxide removal, nutrition, wastewater processing, and biofuel production. Space Algae-2 aims to test the genetic stability of Arthrospira platensis, commonly known as spirulina, during six-months of continuous culture on the International Space Station. Long-duration exposure to ionizing radiation and microgravity may impact growth, nutrient composition, and genetic stability. The high protein, vitamin, antioxidant content, and radiation resistance make spirulina a promising candidate for bioregenerative life support systems. A concept of operations was developed to grow and harvest algal biomass in space. Preflight testing experiments optimized conditions for an extended growth period in a gas permeable bioreactor bag. Preflight and post-harvest storage methods were developed in addition to a novel cryopreservation method. After sample return, multi-omics analysis will be conducted to determine the mutation rate, gene expression, and the protein and metabolite profile. The concept of operations for Space Algae-2 was tested during a lunar mission simulation within a semi-controlled environment. During a six-day lunar analog mission at the Hawai’i Space Exploration Analog and Simulation (HI-SEAS) A. platensis was successfully grown using flight-like hardware. The cyanobacteria were harvested and used to supplement bread as an example of spirulina biomass utilization. Overall, the data collected from Space Algae-2 will inform potential bioengineering of spirulina for space and terrestrial applications.

Algae↗

NASA NTRSDate not supplied

Phase-Free Orbital Element Model Designed to Enable Rapid Assessment of Eclipse and Radiation Profiles for Low-Thrust Spiral Transfers Around the Earth

The Gateway Power and Propulsion Element (PPE) will be the first low-thrust solar electric ion propulsion mission to transfer from a highly elliptical Earth-bound orbit to a southern near-rectilinear halo orbit (NRHO) at the Earth-Moon L2 point. Due to the low thrust nature of the transfer orbit, it is desirable to locate viable trajectories that minimize the time spent in the Van Allen radiation belts to reduce solar array degradation and keep radiation dosages below design limits. In addition to radiation, low thrust trajectories which spiral around the Earth will pass through at least one or more seasons of Earth eclipses. The solar electric propulsion system relies on sunlight to generate the power necessary to operate the ion thrusters. Therefore, it is advantageous to find trajectories which also minimize the amount of time spent in eclipse and avoid excessive battery draw-down periods. We present an analytical method which rapidly approximates low-thrust spiral trajectories, fit to high-fidelity simulated data and parameterized to allow for changes in vehicle thrust characteristics, that is post-processed to determine eclipse profiles and time spent in the belts using a novel approach that estimates the geometry of the belts using a first-order dipole approximation of the Earth’s magnetic field. This method can be used to find satisfactory launch dates and orbit orientations that can serve as initial guesses when optimizing such missions in high-fidelity software.

low thrust trajectory design↗

NASA NTRS2016

Development of a High Performance, Low-Profile Translation Table with Wire Feedthrough

NEAScout, a 6U cubesat, will use an 85 sq m solar sail to travel to a near-earth asteroid for observation. Over the course of the 3-year mission, a combination of reaction wheels, cold gas reaction control system, and a slow rotisserie roll about the solar sail's normal axis were expected to handle attitude control and adjust for imperfections in the deployed sail. As the design for NEAScout matured, one of the critical design parameters, the offset in the center of mass and center of pressure (CP/CM offset), proved to be sub-optimal. After significant mission and control analysis, the CP/CM offset was addressed and a new subsystem was introduced to NEAScout. This system, called the Active Mass Translator (AMT), would reside near the geometric center of NEAScout and adjust the CM by moving one portion of the flight system relative to the other. The AMT was given limited design space-about 17 mm of the vehicle's assembly height-and was required to generate +/-10 cm by +/-5 cm translation to sub-millimeter accuracy. Furthermore, the design must accommodate a large wire bundle of small gage, single strand wire and coax cables fed through the center of the mechanism. The bend radius, bend resistance, and the exposure to deep space environment complicates the AMT design and operation and necessitated a unique design to mitigate risks of wire bundle damage, binding, and cold-welding during operation. This paper will outline the design constraints for the AMT, discuss the methods and reasoning for design, and identify the lessons learned through the design downselect process and breadboarding for designing low-profile translation stages with feedthrough capabilities.

Few, Alex↗

DOE OSTI2026

Statistical inference of anomalous thermal transport with uncertainty quantification for interpretive 2D SOL models

The critical task of inferring anomalous cross-field transport coefficients is addressed in simulations of boundary plasmas with fluid models. A workflow for parameter inference in the UEDGE fluid code is developed using Bayesian optimization with parallelized sampling and integrated uncertainty quantification. In this workflow, transport coefficients are inferred by maximizing their posterior probability distribution, which is generally multidimensional and non-Gaussian. Uncertainty quantification is integrated throughout the optimization within the Bayesian framework that combines diagnostic uncertainties and model limitations. As a concrete example, we infer the anomalous electron thermal diffusivity $\chi_\perp$ from an interpretive 2D model describing electron heat transport in the conduction-limited region with radiative power loss. The workflow is first benchmarked against synthetic data and then tested on H-, L-, and I-mode discharges to match their midplane temperature and divertor heat flux profiles. We demonstrate that the workflow efficiently infers diffusivity and its associated uncertainty, generating 2D profiles that match 1D measurements. Future efforts will focus on incorporating more complicated fluid models and analyzing transport coefficients inferred from a large database of experimental results.

Bayesian optimization↗

DOE OSTI2026

Precision Kinematic Sunyaev--Zel'dovich Measurements Across Halo Mass and Redshift with DESI DR2 and ACT DR6: Part II. Bright Galaxy Survey and Emission-Line Galaxies

We present the first high-significance spectroscopic stacked kinetic Sunyaev-Zel'dovich (kSZ) measurements of circumgalactic gas profiles for both Bright Galaxy Survey (BGS) and Emission Line Galaxy (ELG) tracers, combining DESI Data Release 2 with ACT Data Release 6. Using reconstructed line-of-sight velocities from the DESI galaxies and high-resolution ACT temperature maps, we detect the kSZ signal at high significance, reaching signal-to-noise ratios of up to $\sim$9 for BGS and $\sim$7.5 for ELGs in optimal stellar-mass selections. Together with the LRG measurements presented in Paper I, these constitute the most significant kSZ detections from any spectroscopic survey to date. We perform the analysis in both real and harmonic space, obtaining consistent results. By splitting both tracers into stellar-mass bins, we study the scaling of the kSZ amplitude with galaxy properties. Combining the kSZ measurements with ACT Data Release 6 (DR6) CMB lensing maps enables a joint calibration of the galaxy-halo connection and the gas fractions of host halos. For the BGS galaxies, we observe low gas fractions around the virial radius relative to standard expectations, likely attributable to active galactic nuclei (AGN) activity. We find some evidence for higher-mass halos retaining a larger fraction of their baryons, consistent with more efficient feedback in lower-mass systems. For the ELG sample, dominated by blue, star-forming galaxies, we provide the first detection of the gas distribution in ELG host halos. The ELGs appear to exhibit relatively high gas fractions, which points to the possibility of weaker feedback (due to e.g. low AGN and supernova feedback activity) at their mass scale. Finally, we present generalized Navarro-Frenk-White (GNFW) fits to the harmonic-space measurements, providing a compact parametrization of gas profiles for forward modeling in large-scale structure analyses.

Hadzhiyska, B. [Cambridge U.; Cambridge U., Inst. ↗

DOE OSTI2024

Multimodal sensor fusion for real-time standoff estimation in directed energy deposition

In Laser Powder-based Direct Energy Deposition (LP-DED) systems, achieving consistency, precision and quality of produced parts requires tight control over printing parameters. One of the critical parameters is the standoff distance. Maintaining an optimal standoff height is crucial for achieving correct laser power density and powder catchment efficiency, as both laser and powder streams are focused at this distance. Here, this study introduces a novel approach using multimodal sensor fusion to predict standoff height in real-time. The proposed system integrates two low-profile, cost-effective sensors: an RGB coaxial camera and a high frequency and high dynamic range microphone. By utilizing a simple fully connected neural network, trained on a limited dataset, data fusion of these sensors allowed for the real-time prediction of the standoff height. The results demonstrate high resolution and accuracy of the predictions across multiple geometries and a wide range of standoff heights. This approach offers a simple, and cost-effective solution for real-time standoff height monitoring and lays the groundwork for future integration into commercial LP-DED systems.

42 ENGINEERING↗

DOE OSTI2025

Van der Waals Sandwich Structures for Surface-Enhanced Raman Scattering

Surface-enhanced Raman scattering (SERS) intensity of two-dimensional (2D) materials critically depends on the resonant conditions and factors such as the substrate interferences and molecule adsorption fluctuations, making comprehensive investigation, understanding, and optimization of 2D materials-assisted SERS challenging. Here, in this work, the wavelength-dependent SERS of van der Waals structures of 2D materials is systematically investigated, focusing on the intrinsic frequency-dependent Raman tensors by first-principles method while ruling out other extrinsic factors in experiments. Distinct enhancement profiles are found for different 2D materials, among which MoS2 and graphene exhibit remarkably strong and broadband enhancement effects. For stacked multilayers and heterostructures of 2D materials, the calculated SERS addresses the significance of the first contact monolayer effect. Based on the above theory, the van der Waals sandwich structures are proposed and investigated as the SERS substrates, verifying a further significantly enhanced SERS performance. This resonant first-principles study demonstrates a comprehensive and analytical way to explore and promote the SERS of van der Waals structures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2025

Taylor limit studies for local helicity injection plasma startup

Solenoid-free tokamak startup techniques can simplify the design and reduce the cost of tokamak-based fusion energy systems. The newly commissioned Pegasus-III spherical tokamak provides a dedicated platform for developing a scalable solenoid-free startup approach. Local helicity injection (LHI) is one promising technique being developed on Pegasus-III, which uses compact edge current sources to drive open field line current I inj that is redistributed via helicity-conserving instabilities to initiate tokamak plasmas. These instabilities relax the system toward a minimum energy state described by Taylor relaxation theory. This relaxation process imposes a global current limit for LHI plasmas, referred to as the Taylor limit I TL ⁠, which can dictate the plasma current I p evolution. Experiments on Pegasus and Pegasus-III show that increasing this limit leads to more effective utilization of the available helicity input and higher I p plasmas. Initial Pegasus-III experiments have verified the expected I TL $\varpropto$ ( I inj B T ) 1/2 scaling holds for B T and I inj up to 0.3 T on axis and 12 kA ⁠, respectively. Additionally, data from different injector arrays show that the width of the injector aperture directly alters I TL and can be leveraged for future injector design optimization. Throughout these scaling studies, discharges were overdriven at I p = I TL by providing excess helicity input. Intermittent bursts of n = 1 magnetic activity consistent with large-scale reconnection events occurred more often as the system was increasingly overdriven leading to a flattening of the λ = μ 0 J ∥ / |B| profile, where J ∥ is the parallel current density.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2023

Sphingobium lignivorans sp. nov., isolated from river sediment downstream of a paper mill

Here, a bacterial isolate, B1D3A T , was isolated from river sediment collected from the Hiwassee River near Calhoun, TN, by enrichment culturing with a model 5–5' lignin dimer, dehydrodivanillate, as its sole carbon source. B1D3A T was also shown to utilize several model lignin-derived monomers and dimers as sole carbon sources in a variety of minimal media. Cells were Gram-stain-negative, aerobic, motile, rod-shaped and formed yellow/cream-coloured colonies on rich agar. Optimal growth occurred at 30°C, pH 7–8, and in the absence of NaCl. The major fatty acids of B1D3A T were C 18:1 ω7c and C 17:1 ω6c. The predominant hydroxy fatty acids were C 14: 0 2-OH and C 15:0 2-OH. The polar lipid profile consisted of a mixture of phosphatidylethanolamine, phosphatidylglycerol, diphosphatidylglycerol, phosphatidyldimethylethanolamine and sphingoglycolipid. B1D3A T contained spermidine as the only major polyamine. The major isoprenoid quinone was Q-10 with minor amounts of Q-9 and Q-11. The genomic DNA G+C content of B1D3A T was 65.6mol%. Phylogenetic analyses based on 16S rRNA gene sequences and coding sequences of 49 core, universal genes defined by Clusters of Orthologous Groups gene families indicated that B1D3A T was a member of the genus Sphingobium. B1D3A T was most closely related to Sphingobium sp. SYK-6, with a 100% 16S rRNA gene sequence similarity. B1D3A T showed 78.1–89.9%average nucleotide identity and 19.5–22.2% digital DNA–DNA hybridization identity with other type strains from the genus Sphingobium. On the basis of phenotypic and genotypic properties and phylogenetic inference, strain B1D3A T should be classified as representing a novel species of the genus Sphingobium, for which the name Sphingobium lignivorans sp. nov. is proposed. The type strain is strain B1D3A T (ATCC TSD-279 T =DSM 111877 T ).

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2022

An ℓ 0 ℓ 2 -norm regularized regression model for construction of robust cluster expansions in multicomponent systems

In this work we introduce ℓ 0 ℓ 2 -norm regularization and hierarchy constraints into linear regression for the construction of cluster expansions to describe configurational disorder in materials. The approach is implemented through mixed integer quadratic programming (MIQP). The ℓ 2 -norm regularization is used to suppress intrinsic data noise, while the ℓ 0 -norm is used to penalize the number of nonzero elements in the solution. The hierarchy relation between clusters imposes relevant physics and is naturally included by the MIQP paradigm. As such, sparseness and cluster hierarchy can be well optimized to obtain a robust, converged set of effective cluster interactions with improved physical meaning. We demonstrate the effectiveness of ℓ 0 ℓ 2 -norm regularization in two high-component disordered rocksalt cathode material systems, where we compare the cross-validation, convergence speed, and the reproduction of phase diagrams, voltage profiles, and Li-occupancy energies with those of the conventional ℓ 1 -norm regularized cluster expansion models.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2020

Localization of fluorescent targets in deep tissue with expanded beam illumination for studies of cancer and the brain

Imaging fluorescence through millimeters or centimeters of tissue has important in vivo applications, such as guiding surgery and studying the brain. Often, the important information is the location of one of more optical reporters, rather than the specifics of the local geometry, motivating the need for a localization method that provides this information. We present an optimization approach based on a diffusion model for the fast localization of fluorescent inhomogeneities in deep tissue with expanded beam illumination that simplifies the experiment and the reconstruction. We show that the position of a fluorescent inhomogeneity can be estimated while assuming homogeneous tissue parameters and without having to model the excitation profile, reducing the computational burden and improving the utility of the method. We perform two experiments as a demonstration. First, a tumor in a mouse is localized using a near infrared folate-targeted fluorescent agent (OTL38). This result shows that localization can quickly provide tumor depth information, which could reduce damage to healthy tissue during fluorescence-guided surgery. Second, another near infrared fluorescent agent (ATTO647N) is injected into the brain of a rat, and localized through the intact skull and surface tissue. This result will enable studies of protein aggregation and neuron signaling.

60 APPLIED LIFE SCIENCES↗