Search NASA⌕ Search

SEARCH · Search NASA

Results for “Random effect model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,639 records · Page 91

Modeling Lithium Diffusion in Battery Cathodes Considering Chemo-Mechanically Induced Damage

This talk will present a 3D, continuum-level damage model for simulating Lithium diffusion within generated Li_{x}Ni_{0.5}Mn_{0.3}Co_{0.2} (NMC 532) secondary cathode particles. The primary motivation of the particle-level model is to inform cathode-particle design and determine charging profiles that reduce cathode fracture. The model considers NMC 532 secondary particles containing an agglomeration of anisotropic, randomly oriented grains. The model predicts that secondary-particle fracture is primarily due to non-ideal grain interactions with slight dependence on high-rate charge demands. The model predicts that small secondary-particles with large grains develop significantly less damage than larger secondary particles with small grains. Finally, the model predicts most of the chemo-mechanical damage accumulates in the first high-rate cycles. This chemo-mechanical “damage saturation” effect indicates that initial secondary-particle fracture occurs within the first few cycles, while long-term cathode degradation is not solely chemo-mechanically induced.

47 OTHER INSTRUMENTATION↗

Concepts for a theoretical and experimental study of lifting rotor random loads and vibrations. Phase 6-B: Experiments with progressing/regressing forced rotor flapping modes

A two bladed 16-inch hingeless rotor model was built and tested outside and inside a 24 by 24 inch wind tunnel test section at collective pitch settings up to 5 deg and rotor advance ratios up to .4. The rotor model has a simple eccentric mechanism to provide progressing or regressing cyclic pitch excitation. The flapping responses were compared to analytically determined responses which included flap-bending elasticity but excluded rotor wake effects. Substantial systematic deviations of the measured responses from the computed responses were found, which were interpreted as the effects of interaction of the blades with a rotating asymmetrical wake.

Hohenemser, K. H.↗

Fidelity Analysis of Sampled Imaging Systems

Many modeling, simulation and performance analysis studies of sampled imaging systems are inherently incomplete because they are conditioned on a discrete-input, discrete-output model that only accounts for blurring during image acquisition and additive noise. For those sampled imaging systems where the effects of digital image acquisition, digital filtering and reconstruction are significant, the modeling, simulation and performance analysis should be based on a more comprehensive continuous-input, discrete-processing, continuous-output end-to-end model. This more comprehensive model should properly account for the low-pass filtering effects of image acquisition prior to sampling, the potentially important noiselike effects of the aliasing caused by sampling, additive noise due to device electronics and quantization, the generally high-boost filtering effects of digital processing, and the low-pass filtering effects of image reconstruction. This model should not, however, be so complex as to preclude significant mathematical analysis, particularly the mean-square (fidelity) type of analysis so common in linear system theory. We demonstrate that, although the mathematics of such a model is more complex, the increase in complexity is not so great as to prevent a complete fidelity-metric analysis at both the component level and at the end-to-end system level: that is, computable mean-square-based fidelity metrics are developed by which both component-level and system-level performance can be quantified. In addition, we demonstrate that system performance can be assessed qualitatively by visualizing the output image as the sum of three component images, each of which relates to a corresponding fidelity metric. The cascaded, or filtered, component accounts for the end-to-end system filtering of image acquisition, digital processing, and image reconstruction; the random noise component accounts for additive random noise, modulated by digital processing and image reconstruction filtering; and the aliased noise component accounts for the frequency folding effect of sampling, modulated by digital processing and image reconstruction filtering.

Park, Stephen K.↗

A Projected Network Model of Online Disinformation Cascades

Within the past half-decade, it has become overwhelmingly clear that suppressing the spread of deliberate false and misleading information is of the utmost importance for protecting democratic institutions. Disinformation has been found to come from both foreign and domestic actors, but the effects from either can be disastrous. From the simple encouragement of unwarranted distrust to conspiracy theories promoting violence, the results of disinformation have put the functionality of American democracy under direct threat. Present scientific challenges posed by this problem include detecting disinformation, quantifying its potential impact, and preventing its amplification. We present a model on which we can experiment with possible strategies toward the third challenge: the prevention of amplification. This is a social contagion network model, which is decomposed into layers to represent physical, ''offline'', interactions as well as virtual interactions on a social media platform. Along with the topological modifications to the standard contagion model, we use state-transition rules designed specifically for disinformation, and distinguish between contagious and non-contagious infected nodes. We use this framework to explore the effect of grassroots social movements on the size of disinformation cascades by simulating these cascades in scenarios where a proportion of the agents remove themselves from the social platform. We also test the efficacy of strategies that could be implemented at the administrative level by the online platform to minimize such spread. These top-down strategies include banning agents who disseminate false information, or providing corrective information to individuals exposed to false information to decrease their probability of believing it. We find an abrupt transition to smaller cascades when a critical number of random agents are removed from the platform, as well as steady decreases in the size of cascades with increasingly more convincing corrective information. Finally, we compare simulated cascades on this framework with real cascades of disinformation recorded on Whatsapp surrounding the 2019 Indian election. We find a set of hyperparameter values that produces a distribution of cascades matching the scaling exponent of the distribution of actual cascades recorded in the dataset. We acknowledge the available future directions for improving the performance of the framework and validation methods, as well as ways to extend the model to capture additional features of social contagion.

42 ENGINEERING↗

Development and Validation of Algorithms That Analyze Communicating Thermostat Data to Identify Enclosure Retrofit Opportunities

Annual energy savings of up to $\$ 4$ to $\$ 5$ billion could be achieved nationwide through basic insulation and heating system retrofits of existing homes. However, current utility energy efficiency programs are costly and challenging to scale. Customer acquisition occurs primarily through energy bill mailers, mass media, and online advertising that lack specificity about home-specific retrofit opportunities, expected energy savings, and cost-effectiveness. Specific retrofit opportunities are identified via on-site home energy assessments (HEAs) that are inconvenient to homeowners, expensive, and of variable accuracy. We developed computational algorithms that automatically analyze communicating thermostat (CT) heating data that could be used to increase the customer uptake of insulation and air sealing energy conservation measures (ECMs) by identifying homes with the most significant retrofit opportunities, estimating post-retrofit energy savings, and formulating home-specific outreach. The algorithms are based on an extended second-order grey-box model that characterizes a building’s thermal response using lumped elements, coupled with an empirical model of infiltration that accounts for both wind and stack effects. The basic parameters of the model correspond to actual physical parameters of the home, i.e., the home’s overall R-value of and the building envelope ACH50. Unlike the conventional approach, which estimates model parameters based on the best fit to the observed time-dependent room temperature, our approach derives correlations between the daily heating system runtime and temperature difference (indoor-outdoor) that are more robust to data quality issues in real-world applications. We also used HEA data for algorithm development and validation. With the help of our utility partners, Eversource and National Grid, we obtained data sets for hundreds of Massachusetts homes. For each home, these data sets included three sets of information anonymized by the utility: (1) CT data (HVAC runtime, room temperature, and, for some vendors, outdoor temperature and wind speed) collected by the CT vendor (one of three) over a heating season, (2) HEA report performed by the HEA vendor (same vendor for all homes), (3) Monthly utility gas bills coincident with the CT data (3 to 24 per home, depending on availability). For some homes, we also obtained blower-door test results. Initially, we applied the algorithms developed to homes with a single CT and then extended them to homes with two CTs by using an equivalent home approach. Finally, we developed algorithms for prediction of energy savings and a methodology of comparing our predictions with those generated by HEAs. The main technical results indicate that we can reliably identify homes with insulation and/or air sealing retrofit opportunities and provide accurate savings predictions. Our hypothesis is that the algorithms could be applied to utility energy efficiency programs to identify homes that could realize significant energy savings from insulation and/or air sealing retrofits. This information could then be used to reach out to those homes with highly customized outreach, thereby delivering increased program energy savings and cost-effectiveness. This would: Significantly increase the uptake rate of on-site HEAs, and Significantly increase the fraction of HEAs resulting in ECM implementation. To test these hypotheses, we designed and conducted a randomized controlled trial (RCT). The RCT results suggest that personal messaging leads to a two- to five-fold increase in the HEA uptake rate.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

The transport of suspended sediment in the wake of a marine hydrokinetic turbine: Simulations via a validated Discrete Random Walk (DRW) model

The interaction of sediment with Marine Hydrokinetic (MHK) Turbines is studied via turbulent flow simulation coupled with a model for particle dynamics. The Discrete Random Walk (DRW) model is commonly used for simulations of particle dispersion in environmental flows. A method to improve the accuracy of the DRW model in conjunction with RANS simulations of the flow around MHK turbines is presented. A key issues for the use of the DRW model in marine applications is identified, finding the right characteristic eddy lifetime scale, and a simple methodology based on G.I. Taylor's classical dispersion theory is develop to calibrate this physical model parameter. The model is validated against experiments in the literature and the physics of suspended sediment transport in the wake of an MHK turbine is studied with this improved method. The qualitative changes observed in the particle trajectories agree well with theoretical and empirical observations and the quantitive trends allow for comparison of multiple particle cases under different flow conditions, confirming that this implementation of CFD can become a powerful tool to select the most challenging cases, among the thousands of potential studies on the environmental effects of MHK energy, for further study with experiments and pilot projects.

54 ENVIRONMENTAL SCIENCES↗

Ambient temperature and added heat wave effects on hospitalizations in California from 1999 to 2009

Highlights: • We examined temperature and heat wave links to hospitalizations in California. • Heat waves set as minimum 2 days above climate zone- and month-specific threshold. • Temperature linked with many hospital visit types (e.g. diabetes, ischemic stroke). • Added heat wave associations observed (e.g. acute renal failure), but less often. • Associations sometimes differed by demographic and region. Investigators have examined how heat waves or incremental changes in temperature affect health outcomes, but few have examined both simultaneously. We utilized distributed lag nonlinear models (DLNM) to explore temperature associations and evaluate possible added heat wave effects on hospitalizations in 16 climate zones throughout California from May through October 1999–2009. We define heat waves as a period when daily mean temperatures were above the zone- and month-specific 95th percentile for at least two consecutive days. DLNMs were used to estimate climate zone-specific non-linear temperature and heat wave effects, which were then combined using random effects meta-analysis to produce an overall estimate for each. With higher temperatures, admissions for acute renal failure, appendicitis, dehydration, ischemic stroke, mental health, non-infectious enteritis, and primary diabetes were significantly increased, with added effects from heat waves observed for acute renal failure and dehydration. Higher temperatures also predicted statistically significant decreases in hypertension admissions, respiratory admissions, and respiratory diseases with secondary diagnoses of diabetes, though heat waves independently predicted an added increase in risk for both respiratory types. Our findings provide evidence that both heat wave and temperature exposures can exert effects independently.

54 ENVIRONMENTAL SCIENCES↗

Sphere of Equivalence-A Novel Target Volume Concept for Intraoperative Radiotherapy Using Low-Energy X Rays

Purpose: Accelerated partial breast radiotherapy with low-energy photons from a miniature X-ray machine is undergoing a randomized clinical trial (Targeted Intra-operative Radiation Therapy [TARGIT]) in a selected subgroup of patients treated with breast-conserving surgery. The steep radial dose gradient implies reduced tumor cell control with increasing depth in the tumor bed. The purpose was to compare the expected risk of local recurrence in this nonuniform radiation field with that after conventional external beam radiotherapy. Methods and Materials: The relative biologic effectiveness of low-energy photons was modeled using the linear-quadratic formalism including repair of sublethal lesions during protracted irradiation. Doses of 50-kV X-rays (Intrabeam) were converted to equivalent fractionated doses, EQD2, as function of depth in the tumor bed. The probability of local control was estimated using a logistic dose-response relationship fitted to clinical data from fractionated radiotherapy. Results: The model calculations show that, for a cohort of patients, the increase in local control in the high-dose region near the applicator partly compensates the reduction of local control at greater distances. Thus a 'sphere of equivalence' exists within which the risk of recurrence is equal to that after external fractionated radiotherapy. The spatial distribution of recurrences inside this sphere will be different from that after conventional radiotherapy. Conclusions: A novel target volume concept is presented here. The incidence of recurrences arising in the tumor bed around the excised tumor will test the validity of this concept and the efficacy of the treatment. Recurrences elsewhere will have implications for the rationale of TARGIT.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Incorporating Flexibility Effects into Metal–Organic Framework Adsorption Simulations Using Different Models

High-throughput calculations based on molecular simulations to predict the adsorption of molecules inside metal–organic frameworks (MOFs) have become a useful complement to experimental efforts to identify promising adsorbents for chemical separations and storage. For computational convenience, all existing efforts of this kind have relied on simulations in which the MOF is approximated as rigid. In this paper, we use extensive adsorption–relaxation simulations that fully include MOF flexibility effects to explore the validity of the rigid framework approximation. We also examine the accuracy of several approximate methods to incorporate framework flexibility that are more computationally efficient than adsorption–relaxation calculations. We first benchmark various models of MOF flexibility for four MOFs with well-established CO 2 experimental consensus isotherms. We then consider a range of adsorption properties, including Henry’s constants, nondilute loadings, and adsorption selectivity, for seven adsorbates in 15 MOFs randomly selected from the CoRE MOF database. Our results indicate that in many MOFs adsorption–relaxation simulations are necessary to make quantitative predictions of adsorption, particularly for adsorption at dilute concentrations, although more standard calculations based on rigid structures can provide useful information. Finally, we investigate whether a correlation exists between the elastic properties of empty MOFs and the importance of including framework flexibility in making accurate predictions of molecular adsorption. Our results did not identify a simple correlation of this type.

36 MATERIALS SCIENCE↗

Multi-scale investigation of short-range order and dislocation glide in MoNbTi and TaNbTi multi-principal element alloys

Refractory multi-principal element alloys (RMPEAs) are promising materials for high-temperature structural applications. Here, we investigate the role of short-range ordering (SRO) on dislocation glide in the MoNbTi and TaNbTi RMPEAs using a multi-scale modeling approach. Monte carlo/molecular dynamics simulations with a moment tensor potential show that MoNbTi exhibits a much greater degree of SRO than TaNbTi and the local composition has a direct effect on the unstable stacking fault energies (USFEs). From mesoscale phase-field dislocation dynamics simulations, we find that increasing SRO leads to higher mean USFEs and stress required for dislocation glide. The gliding dislocations experience significant hardening due to pinning and depinning caused by random compositional fluctuations, with higher SRO decreasing the degree of USFE dispersion and hence, amount of hardening. Finally, we show how the morphology of an expanding dislocation loop is affected by the applied stress.

36 MATERIALS SCIENCE↗

Closed‐loop hierarchical control strategies for connected and autonomous hybrid electric vehicles with random errors

This study presents a closed‐loop hierarchical control strategy for a group of connected and autonomous hybrid electric vehicles (HEVs) with the purpose of optimising fuel economy while guaranteeing traffic mobility and vehicle safety. In the hierarchical control architecture, a decentralised stochastic model predictive control (SMPC)‐based higher level controller incorporating signal phase and timing information is formulated to optimise the velocity profile of each vehicle, and an adaptive equivalent consumption minimisation strategy based lower level controller is employed for the energy management control of the HEVs. Creatively, random errors of the control variable are considered in the SMPC framework. The errors are discretised and modelled as a Markov process and the state transition matrix of the errors is generated randomly to capture the error transition dynamics. To solve the SMPC problem more efficiently, a scenario‐based SMPC is employed. Moreover, the propulsion and recuperation efficiencies of the lower level controller are calculated at each time step with measurable variables, and fed back to the higher level controller for velocity optimisation in next time step. Simulation results validate the control effectiveness and advantages of the proposed control architecture.

Qiu, Shaolin↗

An efficient method to propagate model uncertainty when inverting seismic data for time domain seismic moment tensors

SUMMARY We present a computationally efficient method to approximately propagate uncertainty when linearly inverting seismic data for point source, time variable moment tensor components. The method is based on the assumption that the data residual, given by the difference between the observed seismic data and the data predicated by a linear inversion, contains the effects of both data and model uncertainty. Our method uses a distribution of data residuals, added directly to the data, in a pseudo-Monte Carlo scheme. Using the assumption that the data residual is a stochastic process, we use the well-known Karhunen–Loève (KL) theorem to construct a distribution of data residuals, where the required basis functions are constructed using Fourier series. The Fourier series are scaled by a product of a random variable and the real-valued spectral amplitudes of the original data residual’s spectrum. Thus, the Fourier series and spectral amplitudes are eigenfunction-eigenvalue pairs used in the KL-based construction of data residual distribution. Using tests with synthetic data, we show that our method compares closely with a Finite Difference Monte Carlo (FDMC) method that we presented previously. More importantly, the method presented here is computationally several orders of magnitude faster than our previous FDMC method, and requires no a priori assumptions of model and/or data uncertainty.

Poppeliers, Christian (ORCID:0000000159526849)↗

Magnetic ground state and perturbations of the distorted kagome Ising metal TmAgGe

Here, we present the magnetic orders and excitations of the distorted kagome intermetallic magnet TmAgGe. Using neutron single crystal diffraction we identify the propagation vectors k = ($\frac{1}{2}$ 0 0) and k = (0 0 0) and determine the magnetic structures of the zero-field and magnetic field-induced phases for H along the $\mathcal{a}$ and [–110] crystal directions. We determine the experimental magnetic field- temperature (H, T)-phase diagram and reproduce it by Monte Carlo simulations of an effective spin exchange Hamiltonian for one distorted kagome layer. Our model includes a strong axial single-ion anisotropy and significantly smaller exchange couplings, which span up to the third-nearest neighbors within the layer. Single crystal inelastic neutron scattering (INS) measurements reveal an almost flat, only weakly dispersive mode around 7 meV that we use alongside bulk magnetization data to deduce the crystal-electric field (CEF) scheme for the Tm 3+ ions. Random phase approximation (RPA) calculations based on the determined CEF wave functions of the two lowest quasidoublets enable an estimation of the interlayer coupling that is compatible with the experimental INS spectra. No evidence for low-energy spin waves associated to the magnetic order was found, which is consistent with the strongly Ising nature of the ground state.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Description of the giant monopole resonance in the even-A {sup 112-124}Sn isotopes within a microscopic model including quasiparticle-phonon coupling

We have calculated the strength distributions of the isoscalar giant monopole resonance (ISGMR) in the even-A tin isotopes (A=112-124) that were recently measured in inelastic {alpha} scattering. The calculations were performed within two microscopic models: the quasiparticle random phase approximation (QRPA) and the quasiparticle time blocking approximation (QTBA), which is an extension of the QRPA including quasiparticle-phonon coupling. We used a self-consistent calculational scheme based on the Hartree-Fock+Bardeen-Cooper-Schrieffer approximation. Within the RPA the self-consistency is full. The single-particle continuum is also exactly included at the RPA level. The self-consistent mean field and the effective interaction are derived from the Skyrme energy functional. In the calculations, two Skyrme force parametrizations were used: T5 with a comparatively low value of the incompressibility modulus of infinite nuclear matter (K{sub {infinity}}=202 MeV) and T6 with K{sub {infinity}}=236 MeV. The T5 parametrization gives theoretical results for tin isotopes in good agreement with the experimental data including the resonance widths. The results of the ISGMR calculations in {sup 90}Zr, {sup 144}Sm, and {sup 208}Pb performed with these Skyrme forces are discussed and compared with the experiment.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Machine learning inversion from scattering for mechanically driven polymers

A machine learning inversion method is developed for analyzing scattering functions of mechanically driven polymers and extracting the corresponding feature parameters, which include energy parameters and conformation variables. The polymer is modeled as a chain of fixed-length bonds constrained by bending energy, and it is subject to external forces such as stretching and shear. We generate a data set consisting of random combinations of energy parameters, including bending modulus, stretching and shear force, along with Monte Carlo-calculated scattering functions and conformation variables such as end-to-end distance, radius of gyration and off-diagonal component of the gyration tensor. The effects of the energy parameters on the polymer are captured by the scattering function, and principal component analysis ensures the feasibility of the machine learning inversion. Finally, we train a Gaussian process regressor using part of the data set as a training set and validate the trained regressor for inversion using the rest of the data. The regressor successfully extracts the feature parameters.

Gaussian process regressors↗

Animal movement estimation and network-based epidemic modeling: Illustration for the swine industry in Iowa (US)

Animal movement plays a critical role in disease transmission between farms. However, in the United States, the lack of available animal shipment data, sometimes coupled with a lack of detailed information about farm demographics and characteristics, presents great challenges for epidemic modeling and prediction. In this study, we proposed a new method based on the maximum entropy to generate “synthetic” animal movement networks, considering available statistics about the premises operation type, operation size, and the distance between premises. We illustrated our method for the swine movement networks in Iowa and performed network analyses to gain insights into the swine industry. We then applied the generated networks to a network-based epidemic model to identify potential system vulnerabilities in terms of disease transmission. The model was parameterized for African Swine Fever (ASF) as the US swine industry is quite concerned about this disease. Results show that premises with a central role in the network are more vulnerable to disease outbreaks and play an important role in disease spread. Simulations with outbreaks starting from random farms reveal no significant large outbreaks, indicating the system’s relative robustness against arbitrary disease introductions. However, outbreaks originating from high out-degree farms can lead to large epidemic sizes. This underscores the importance for stakeholders and policymakers to continue improving animal movement records and traceability programs in the US and the value of making that data available to epidemiologists and modelers to better understand risk and inform strategies aimed to cost-effectively prevent and control disease transmission. Our approach could be easily adapted to estimate movement networks in other animal production systems and to inform disease spread models for various infectious diseases.

60 APPLIED LIFE SCIENCES↗

Vortex noise from nonrotating cylinders and airfoils

An experimental study of vortex-shedding noise was conducted in an acoustic research tunnel over a Reynolds-number range applicable to full-scale helicopter tail-rotor blades. Two-dimensional tapered-chord nonrotating models were tested to simulate the effect of spanwise frequency variation on the vortex-shedding mechanism. Both a tapered circular cylinder and tapered airfoils were investigated. The results were compared with data for constant-diameter cylinder and constant-chord airfoil models also tested during this study. Far-field noise, surface pressure fluctuations, and spanwise correlation lengths were measured for each configuration. Vortex-shedding noise for tapered cylinders and airfoils was found to contain many narrowband-random peaks which occurred within a range of frequencies corresponding to a predictable Strouhal number referenced to the maximum and minimum chord. The noise was observed to depend on surface roughness and Reynolds number.

Schlinker, R. H.↗

Software reliability report

There are many software reliability models which try to predict future performance of software based on data generated by the debugging process. Unfortunately, the models appear to be unable to account for the random nature of the data. If the same code is debugged multiple times and one of the models is used to make predictions, intolerable variance is observed in the resulting reliability predictions. It is believed that data replication can remove this variance in lab type situations and that it is less than scientific to talk about validating a software reliability model without considering replication. It is also believed that data replication may prove to be cost effective in the real world, thus the research centered on verification of the need for replication and on methodologies for generating replicated data in a cost effective manner. The context of the debugging graph was pursued by simulation and experimentation. Simulation was done for the Basic model and the Log-Poisson model. Reasonable values of the parameters were assigned and used to generate simulated data which is then processed by the models in order to determine limitations on their accuracy. These experiments exploit the existing software and program specimens which are in AIR-LAB to measure the performance of reliability models.

Wilson, Larry↗