Search NASA⌕ Search

SEARCH · Search NASA

Results for “Scanning electron microscopy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,639 records · Page 91

Heterostructures of Bi-4334 and MgB{sub 2} superconductors

We report the studies on hetero structures of Bi-4334 and MgB{sub 2} superconductors. The two superconductors were arranged in the form of bulk multilayers using hydraulic pressure system. X-ray diffraction pattern and dc magnetization studies confirm the presence of both superconducting phases in this try-layer hetero structured sample. The d.c magnetization shows the superconducting onset at 77 K and 39 K for Bi-4334 and MgB{sub 2} phases respectively. Critical current density (J{sub c}) is calculated from hysteresis loop of the sample in both in-plane field and out of plane field configurations. Inverted anisotropy in J{sub c} is observed due to enhancement of ab-plane properties because of multilayer growth process. Morphology of the samples at surface and interface of two superconducting layers is discussed in view of Field emission scanning electron microscopy.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Silver photo-diffusion and photo-induced macroscopic surface deformation of Ge{sub 33}S{sub 67}/Ag/Si substrate

Ge-chalcogenide films show various photo-induced changes, and silver photo-diffusion is one of them which attracts lots of interest. In this paper, we report how silver and Ge-chalcogenide layers in Ge{sub 33}S{sub 67}/Ag/Si substrate stacks change under light exposure in the depth by measuring time-resolved neutron reflectivity. It was found from the measurement that Ag ions diffuse all over the matrix Ge{sub 33}S{sub 67} layer once Ag dissolves into the layer. We also found that the surface was macroscopically deformed by the extended light exposure. Its structural origin was investigated by a scanning electron microscopy.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Proton-Conducting Composites Based on the Cs{sub 4}(HSO{sub 4}){sub 3}(H{sub 2}PO{sub 4}) Compound

Proton-conducting composites xCs{sub 4}(HSO{sub 4}){sub 3}(H{sub 2}PO{sub 4}) + (1–x)AlPO{sub 4} in the composition range x = 0.9–0.5 have been obtained. Their transport properties are studied by impedance spectroscopy. The dependences of the phase composition of the materials on the component ratio are investigated by X-ray diffraction analysis. The spatial phase distribution in the materials is analyzed using scanning electron microscopy.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Heat induced nanoforms of zinc oxide quantum dots and their characterization

In our studies we observed heat induced phase transitions of Zinc oxide quantum dots at 60, 200, 360 and 400 Degree-Sign C, where all the transitions were irreversible except the transition at 60 Degree-Sign C which wasa reversible one. The phase transition at 60 Degree-Sign C indicated a heat induced conformational change which was supported here by studying polarizing micrographs of ZnO quantum dots thin film. The X-ray diffraction studies of the sample fired at different temperatures as indicated by the thermal analysis were performed in order to understand the changes occurred due to transitions. The study also indicated a new and simple approach to develop ZnO nanorods by just thermal decomposition of the ZnO quantum dots firing in furnace at 200 Degree-Sign C with 2h soaking. In order to have a proper insight of the structural changes we performed scanning electron microscopy. Optical characterization was done by UV-Vis and fluorescence spectrophotometer.

36 MATERIALS SCIENCE↗

Preparation and characterization of indium doped CdS{sub 0.2}Se{sub 0.8} thin films by spray pyrolysis

The CdS{sub 0.2}Se{sub 0.8} and indium doped CdS{sub 0.2}Se{sub 0.8} thin films have been deposited onto the amorphous glass and fluorine doped tin oxide coated glass substrates by spray pyrolysis. The doping concentration of indium has been optimized by photoelectrochemical characterization technique. The structural, surface morphological, optical and electrical properties of CdS{sub 0.2}Se{sub 0.8} and indium doped CdS{sub 0.2}Se{sub 0.8} thin films have been studied. X-ray diffraction studies reveal that the films are polycrystalline in nature with hexagonal crystal structure. Scanning electron microscopy studies reveal that the grains are uniform with uneven spherically shaped, distributed over the entire substrate surface. The complete surface morphology has been changed after doping. In optical studies, the transition of the deposited films is found to be direct allowed with optical energy gaps decreasing from 1.91 to 1.67 eV with indium doping. Semiconducting behavior has been observed from resistivity measurements. The thermoelectric power measurements reveal that the films exhibit n-type conductivity.

36 MATERIALS SCIENCE↗

Utilization of blended fluidized bed combustion (FBC) ash and pulverized coal combustion (PCC) fly ash in geopolymer

In this paper, synthesis of geopolymer from fluidized bed combustion (FBC) ash and pulverized coal combustion (PCC) fly ash was studied in order to effectively utilize both ashes. FBC-fly ash and bottom ash were inter-ground to three different finenesses. The ashes were mixed with as-received PCC-fly ash in various proportions and used as source material for synthesis of geopolymer. Sodium silicate (Na{sub 2}SiO{sub 3}) and 10 M sodium hydroxide (NaOH) solutions at mass ratio of Na{sub 2}SiO{sub 3}/NaOH of 1.5 and curing temperature of 65 deg. C for 48 h were used for making geopolymer. X-ray diffraction (XRD), scanning electron microscopy (SEM), degree of reaction, and thermal gravimetric analysis (TGA) were performed on the geopolymer pastes. Compressive strength was also tested on geopolymer mortars. The results show that high strength geopolymer mortars of 35.0-44.0 MPa can be produced using mixture of ground FBC ash and as-received PCC-fly ash. Fine FBC ash is more reactive and results in higher degree of reaction and higher strength geopolymer as compared to the use of coarser FBC ash. Grinding increases reactivity of ash by means of increasing surface area and the amount of reactive phase of the ash. In addition, the packing effect due to fine particles also contributed to increase in strength of geopolymers.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Automated Chemical Analysis of Internally Mixed Aerosol Particles Using X-ray Spectromicroscopy at the Carbon K-Edge

We have developed an automated data analysis method for atmospheric particles using scanning transmission X-ray microscopy coupled with near edge X-ray fine structure spectroscopy (STXM/NEXAFS). This method is applied to complex internally mixed submicrometer particles containing organic and inorganic material. Several algorithms were developed to exploit NEXAFS spectral features in the energy range from 278 to 320 eV for quantitative mapping of the spatial distribution of elemental carbon, organic carbon, potassium, and noncarbonaceous elements in particles of mixed composition. This energy range encompasses the carbon K-edge and potassium L2 and L3 edges. STXM/NEXAFS maps of different chemical components were complemented with a subsequent analysis using elemental maps obtained by scanning electron microscopy coupled with energy dispersive X-ray analysis (SEM/EDX). We demonstrate the application of the automated mapping algorithms for data analysis and the statistical classification of particles.

54 ENVIRONMENTAL SCIENCES↗

One-Step Growth of Ge doped ZnO Tubes by Thermal Evaporation

In this paper we report a simple thermal evaporation technique (horizontal tube furnace) to grow the bulk-quantity of germanium (Ge) doped zinc oxide (ZnO) tubes on the Si substrate by using one-step thermal evaporation of a mixed powder of Ge and ZnO. The microstructure and optical properties of the Ge doped ZnO tubes have been investigated by scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), X-ray diffraction, photoluminescence (PL) spectrometer and Raman spectrometer. The investigation of structural properties indicated that the structures consist of bulk quantities of cylindrical rod and tube with diameter around 1micron. EDX reveals that the tube structures have Ge, Zn and O{sub 2} compositions and XRD analysis indicated the product is mainly composed of Ge, zinc germanium oxide (Zn{sub 2}GeO{sub 4}) and small proportion of ZnO. Room temperature photoluminescence (PL) spectrum shows broad emission peaks around 400 nm, opening up a route to potential applications in future optoelectronic devices. Raman measurement also measured at room temperature for these tubes.

36 MATERIALS SCIENCE↗

Synthesis of nanocrystalline magnesium titanate by an auto-igniting combustion technique and its structural, spectroscopic and dielectric properties

Nanocrystalline magnesium titanate was synthesized through an auto-ignited combustion method. The phase purity of the powder was examined using X-ray diffraction, thermo gravimetric analysis, differential thermal analysis, Fourier transform infrared spectroscopy and Raman spectroscopy. The transmission electron microscopy study showed that the particle size of the as-prepared powder was in between 20 and 40 nm. The nanopowder could be sintered to 98% of the theoretical density at 1200 {sup o}C for 3 h. The microstructure of the sintered surface was examined using scanning electron microscopy. The dielectric constant ({epsilon}{sub r}) of 16.7 and loss factor (tan {delta}) of the order of 10{sup -4} were obtained at 5 MHz when measured using LCR meter. The quality factor (Q{sub u} x f) 73,700 and temperature coefficient of resonant frequency ({tau}{sub f}) -44.3 ppm/{sup o}C, at 6.5 GHz are the best reported values for sintered pellets obtained from phase pure nanocrystalline MgTiO{sub 3} powder.

36 MATERIALS SCIENCE↗

Effect of ion bombardment on the field emission property of tetrapod ZnO

The influences of ion bombardment on the field emission performance of tetrapod ZnO nanostructures are reported. As the scanning electron microscopy images and photoluminescence spectrum show, the tips of the field emitters are destroyed and the surface state of the field emitters is also changed after the ion bombardment. The ion bombardment has a considerable effect on the field emission properties of the tetrapod ZnO field emitters. After Ar{sup +} ion bombardment with the energy of 3 keV and the ion current of 0.05 {mu}A for 30 min, the turn-on field increases about 63% and the threshold field increases about 77%, respectively. There are two main reasons for the variation in field-emission property: (1) the decrement of the field enhancement factor {beta}, which is caused by the variation in morphology of field emitter; (2) the increment of work function {phi}, which is caused by the changed concentration of the surface oxygen vacancy.

36 MATERIALS SCIENCE↗

Cr-doped TiO{sub 2} (rutile): Ferromagnetism in bulk form?

Cr-doped rutile samples in powder and single crystal form have been prepared and studied with particular emphasis on their compositional, structural, and magnetic properties. Both powders and single crystals were characterized using x-ray diffractometry and vibrating sample magnetometry, while crystals were also studied using the x-ray Laue technique, scanning electron microscopy, and energy dispersive x-ray analysis. The results indicate weak ferromagnetic behavior at room temperature (RT) in Cr-doped TiO{sub 2} powders having 2 at. % Cr, while powders with higher amounts of Cr (e.g., 8 or 12 at. %) showed no evidence of ferromagnetism. Following successful floating zone crystal growth of Cr-doped rutile crystals in argon, magnetic measurements taken from the as-grown crystals revealed no indication of RT ferromagnetism over the composition range 2 to 12 at. % Cr. A solubility limit for Cr into the rutile matrix of 3 at. % Cr at RT is suggested.

36 MATERIALS SCIENCE↗

Vapor-phase grafting of functional silanes on atomic layer deposited Al 2 O 3

Fundamental studies are needed to advance our understanding of selective adsorption in aqueous environments and develop more effective sorbents and filters for water treatment. Vapor-phase grafting of functional silanes is an effective method to prepare well-defined surfaces to study selective adsorption. In this investigation, we perform vapor phase grafting of five different silane compounds on aluminum oxide (Al2O3) surfaces prepared by atomic layer deposition. These silane compounds have the general formula L3Si–C3H6–X where the ligand, L, controls the reactivity with the hydroxylated Al2O3 surface and the functional moiety, X, dictates the surface properties of the grafted layer. We study the grafting process using in situ Fourier transform infrared spectroscopy and ex situ x-ray photoelectron spectroscopy measurements, and we characterize the surfaces using scanning electron microscopy, atomic force microscopy, and water contact angle measurements. Here, we found that the structure and density of grafted aminosilanes are influenced by their chemical reactivity and steric constraints around the silicon atom as well as by the nature of the anchoring functional groups. Methyl substituted aminosilanes yielded more hydrophobic surfaces with a higher surface density at higher grafting temperatures. Thiol and nitrile terminated silanes were also studied and compared to the aminosilane terminated surfaces. Uniform monolayer coatings were observed for ethoxy-based silanes, but chlorosilanes exhibited nonuniform coatings as verified by atomic force microscopy measurements.

36 MATERIALS SCIENCE↗

Visible light-induced photocatalytic properties of WO{sub 3} films deposited by dc reactive magnetron sputtering

The authors examined the photocatalytic activity of WO{sub 3} films (thickness 500-600 nm) deposited on a fused quartz substrate heated at 350-800 deg. C by dc reactive magnetron sputtering using a W metal target under the O{sub 2} gas pressure from 1.0 to 5.0 Pa. Films deposited at 800 deg. C under 5.0 Pa have excellent crystallinity of triclinic, P1(1) structure and a large surface area, as confirmed by x-ray diffraction, scanning electron microscopy, and atomic force microscopy. Exposure of acetaldehyde (CH{sub 3}CHO) adsorbed onto the film surface to ultraviolet, visible, or standard fluorescence light induces oxidative photocatalytic decomposition indicated by a decrease in CH{sub 3}CHO concentration and generation of CO{sub 2} gas. For all three types of irradiation, concentration ratio of decreased CH{sub 3}CHO to increased CO{sub 2} is about 1:1, suggesting the possible presence of intermediates. The sputter-deposited WO{sub 3} film can be a good candidate as a visible light-responsive photocatalyst.

36 MATERIALS SCIENCE↗

Facile creation of bio-inspired superhydrophobic Ce-based metallic glass surfaces

A bio-inspired synthesis strategy was conducted to fabricate superhydrophobic Ce-based bulk metallic glass (BMG) surfaces with self-cleaning properties. Micro-nanoscale hierarchical structures were first constructed on BMG surfaces and then modified with the low surface energy coating. Surface structures, surface chemical compositions, and wettability were characterized by combining scanning electron microscopy, atomic force microscopy, x-ray photoelectron spectroscopy, and contact angle measurements. Research indicated that both surface multiscale structures and the low surface free energy coating result in the final formation of superhydrophobicity.

36 MATERIALS SCIENCE↗

Thermo-mechanical and electrical properties of epoxy composites containing ceramic nanofillers

Epoxy nanocomposites with ceramic nanoparticles, i.e. Al{sub 2}O{sub 3}, Tio{sub 2} and SiO{sub 2}, were prepared by combined dispersion techniques, namely mechanical mixing and sonication. The influence of fillers addition on thermal, mechanical and dielectric properties have been investigated by means of Differential Scanning Calorimetry (DSC), Dynamic-mechanical analysis (DMA) and dielectric spectroscopy to measure the dielectric permittivity, tan delta and volume resistivity. Morphological investigations by Scanning Electron Microscopy (SEM) has been also performed.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Analysis of the Corrosion Behavior of an A-TIG Welded SS 409 Weld Fusion Zone

AISI 409 (SS 409) ferritic stainless steel is generally used as the thick gauge section in freight train wagons, in ocean containers, and in sugar refinery equipment. Activating the flux tungsten inert gas (A-TIG) welding process can reduce the welding cost during fabrication of thick sections. However, corrosion behavior of the A-TIG weld fusion zone is a prime concern for this type of steel. In the present work, the effect of the A-TIG welding process parameters on the corrosion behavior of a weld fusion zone made of 8-mm-thick AISI 409 ferritic stainless-steel plate has been analyzed. Potentiodynamic polarization tests were performed to evaluate the corrosion behavior. The maximum corrosion potential (E{sub corr}) was shown by the weld made using a welding current of 215 A, a welding speed of 95 mm/min, and a flux coating density of 0.81 mg/cm{sup 2}. The minimum E{sub corr} was observed in the weld made using a welding current of 190 A, a welding speed of 120 mm/min, and a flux coating density of 1.40 mg/cm{sup 2}. The current study also presents the inclusive microstructure–corrosion property relationships using the collective techniques of scanning electron microscopy, energy-dispersive x-ray spectroscopy, and x-ray diffraction.

36 MATERIALS SCIENCE↗

Airtight container for the transfer of atmosphere-sensitive materials into vacuum-operated characterization instruments

This paper describes the design and operation of a simple airtight container devised to facilitate the transfer of atmosphere-sensitive samples from a glovebox to the vacuum chamber of an analytical instrument such as a scanning electron microscope. The use of this device for characterizing the microstructure of highly hygroscopic strontium iodide ceramics by scanning electron microscopy is illustrated as an application example.

36 MATERIALS SCIENCE↗

Structural-dependent thermal conductivity of aluminium nitride produced by reactive direct current magnetron sputtering

This Letter reports the thermal conductivity of aluminium nitride (AlN) thin-films deposited by reactive DC magnetron sputtering on single-crystal silicon substrates (100) with varying plasma and magnetic conditions achieving different crystalline qualities. The thermal conductivity of the films was measured at room temperature with the transient hot-strip technique for film thicknesses ranging from 100 nm to 4000 nm. The thermal conductivity was found to increase with the thickness depending on the synthesis conditions and film microstructure. The conductivity in the bulk region of the films, so-called intrinsic conductivity, and the boundary resistance were in the range [120-210] W m{sup -1} K{sup -1} and [2-30 Multiplication-Sign 10{sup -9}] K m{sup 2} W{sup -1}, respectively, in good agreement with microstructures analysed by x-ray diffraction, high-resolution-scanning-electron-microscopy, and transmission-electron-microscopy.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗