Search NASA⌕ Search

SEARCH · Search NASA

Results for “Simulation Use Case”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,639 records · Page 91

Investigation of the acoustic properties of composite materials

An effort to provide inspection of the bondlines in the Space Shuttle Solid Rocket Motor (SRM) is discussed. Investigation of the bondlines in the membrane region of the SRM has centered on representative samples provided by Morton Thiokol. These samples have pull-tabs, or in one case grafoil inserts, to simulate delaminations at various points in the multilayer structure of steel case, liner, insulation, liner, and propellant. Discussed here is the continuing approach to examining these defects which is predicated on a model of an ultrasonic wave propagating in a lossy multilayer resonant structure, the experimental arrangements used, and the results of these experiments.

Smith, B. T.↗

Computational aeroacoustics of propeller noise in the near and far field

Techniques for applying the NASPROP-E computer code (Bober et al., 1983) to characterize the acoustic field of a transonic propfan are described and demonstrated for the case of the SR-3 propfan. It is pointed out that NASPROP E accounts for the nonlinear quadrupole, monopole, and dipole noise sources. The approach used, based on that of White (1984) and Korkan et al. (1985 and 1986), is described in detail, and the results of simulations employing different (reflective and nonreflective) inflow-outflow boundary conditions and azimuthal mesh spacings are presented in graphs and briefly discussed.

Forsyth, D. W.↗

Phase transformation kinetics in finite inhomogeneously nucleated systems

Phase transformation kinetics that occur by a nucleation and growth process are investigated. A simple discrete space and time model is used for the dynamics and analytical results are obtained for the volume fraction of the material transformed for both finite systems and a special example of an inhomogeneously nucleated system. The theory is developed for two cases, initial nucleation, and continuous nucleation. The results are compared with simulations of the model.

Weinberg, Michael↗

Comparison between analytical models and finite-difference simulations in transmission-line tap resistors and L-type cross-Kelvin resistors

Approximate analytical models of the transmission-line tap resistor and the cross-Kelvin resistor are compared with computer-simulated pseudo-three-dimensional resistor network models. The analytical formulas are in good agreement with the simulations over a useful range of parameters and are readily applied to the extraction of the contact resistivity and the sheet resistances of the semiconducting layer under and outside the contacts. The extraction procedure, which is easily implemented on a personal computer, is carried out for the case of alloyed AuGeNi/GaAs contacts, illustrating the importance of (1) distinguishing between layer sheet resistance under and outside the contacts and (2) considering two-dimensional current flow in the semiconducting layer.

Scorzoni, Andrea↗

METCAN simulation of candidate metal matrix composites for high temperature applications

The METCAN (Metal Matrix Composite Analyzer) computer code is used to simulate the nonlinear behavior of select metal matrix composites in order to assess their potential for high temperature structural applications. Material properties for seven composites are generated at a fiber volume ratio of 0.33 for two bonding conditions (a perfect bond and a weak interphase case) at various temperatures. A comparison of the two bonding conditions studied shows a general reduction in value of all properties (except CTE) for the weak interphase case from the perfect bond case. However, in the weak interphase case, the residual stresses that develop are considerably less than those that form in the perfect bond case. Results of the computational simulation indicate that among the metal matrix composites examined, SiC/NiAl is the best candidate for high temperature applications at the given fiber volume ratio.

Lee, Ho-Jun↗

Hybrids - Best of both worlds

An overview is presented of hybrid rocket propulsion systems whereby combining solids and liquids for launch vehicles could produce a safe, reliable, and low-cost product. The primary subsystems of a hybrid system consist of the oxidizer tank and feed system, an injector system, a solid fuel grain enclosed in a pressure vessel case, a mixing chamber, and a nozzle. The hybrid rocket has an inert grain, which reduces costs of development, transportation, manufacturing, and launch by avoiding many safety measures that must be taken when operating with solids. Other than their use in launch vehicles, hybrids are excellent for simulating the exhaust of solid rocket motors for material development.

Goldberg, Ben E.↗

Aerodynamic Influence of a Slat on a Flapped Wing

Three high-lift configurations were computationally studied to assess the aerodynamic influence of slats. A flapped wing was simulated with no slat, a full-span slat, and a three quarter-span slat at a chord based Reynolds number of 3.7 million. The flows were computed using a compressible Navier-Stokes solver on structured grids with the Spalart-Allmaras turbulence model. All cases were compared with experimental data to validate the approach. The slats not only increase the lift generated by the wing but alter the topology of the flowfield considerably. The changes in the flow give insight into the working of a slat and contribute to a better understanding of high-lift flows in general.

Mathias, Donovan L.↗

Real-Time Dynamic Modeling - Data Information Requirements and Flight Test Results

Practical aspects of identifying dynamic models for aircraft in real time were studied. Topics include formulation of an equation-error method in the frequency domain to estimate non-dimensional stability and control derivatives in real time, data information content for accurate modeling results, and data information management techniques such as data forgetting, incorporating prior information, and optimized excitation. Real-time dynamic modeling was applied to simulation data and flight test data from a modified F-15B fighter aircraft, and to operational flight data from a subscale jet transport aircraft. Estimated parameter standard errors, prediction cases, and comparisons with results from a batch output-error method in the time domain were used to demonstrate the accuracy of the identified real-time models.

Morelli, Eugene A.↗

Requirements for Large Eddy Simulation Computations of Variable-Speed Power Turbine Flows

Variable-speed power turbines (VSPTs) operate at low Reynolds numbers and with a wide range of incidence angles. Transition, separation, and the relevant physics leading to them are important to VSPT flow. Higher fidelity tools such as large eddy simulation (LES) may be needed to resolve the flow features necessary for accurate predictive capability and design of such turbines. A survey conducted for this report explores the requirements for such computations. The survey is limited to the simulation of two-dimensional flow cases and endwalls are not included. It suggests that a grid resolution necessary for this type of simulation to accurately represent the physics may be of the order of Delta(x)+=45, Delta(x)+ =2 and Delta(z)+=17. Various subgrid-scale (SGS) models have been used and except for the Smagorinsky model, all seem to perform well and in some instances the simulations worked well without SGS modeling. A method of specifying the inlet conditions such as synthetic eddy modeling (SEM) is necessary to correctly represent the inlet conditions.

Grid↗

Characterizing Epistemic Uncertainty for Launch Vehicle Designs

NASA Probabilistic Risk Assessment (PRA) has the task of estimating the aleatory (randomness) and epistemic (lack of knowledge) uncertainty of launch vehicle loss of mission and crew risk, and communicating the results. Launch vehicles are complex engineered systems designed with sophisticated subsystems that are built to work together to accomplish mission success. Some of these systems or subsystems are in the form of heritage equipment, while some have never been previously launched. For these cases, characterizing the epistemic uncertainty is of foremost importance, and it is anticipated that the epistemic uncertainty of a modified launch vehicle design versus a design of well understood heritage equipment would be greater. For reasons that will be discussed, standard uncertainty propagation methods using Monte Carlo simulation produce counter intuitive results, and significantly underestimate epistemic uncertainty for launch vehicle models. Furthermore, standard PRA methods, such as Uncertainty-Importance analyses used to identify components that are significant contributors to uncertainty, are rendered obsolete, since sensitivity to uncertainty changes are not reflected in propagation of uncertainty using Monte Carlo methods. This paper provides a basis of the uncertainty underestimation for complex systems and especially, due to nuances of launch vehicle logic, for launch vehicles. It then suggests several alternative methods for estimating uncertainty and provides examples of estimation results. Lastly, the paper describes how to implement an Uncertainty-Importance analysis using one alternative approach, describes the results, and suggests ways to reduce epistemic uncertainty by focusing on additional data or testing of selected components.

Novack, Steven D.↗

Characterizing Epistemic Uncertainty for Launch Vehicle Designs

NASA Probabilistic Risk Assessment (PRA) has the task of estimating the aleatory (randomness) and epistemic (lack of knowledge) uncertainty of launch vehicle loss of mission and crew risk and communicating the results. Launch vehicles are complex engineered systems designed with sophisticated subsystems that are built to work together to accomplish mission success. Some of these systems or subsystems are in the form of heritage equipment, while some have never been previously launched. For these cases, characterizing the epistemic uncertainty is of foremost importance, and it is anticipated that the epistemic uncertainty of a modified launch vehicle design versus a design of well understood heritage equipment would be greater. For reasons that will be discussed, standard uncertainty propagation methods using Monte Carlo simulation produce counter intuitive results and significantly underestimate epistemic uncertainty for launch vehicle models. Furthermore, standard PRA methods such as Uncertainty-Importance analyses used to identify components that are significant contributors to uncertainty are rendered obsolete since sensitivity to uncertainty changes are not reflected in propagation of uncertainty using Monte Carlo methods.This paper provides a basis of the uncertainty underestimation for complex systems and especially, due to nuances of launch vehicle logic, for launch vehicles. It then suggests several alternative methods for estimating uncertainty and provides examples of estimation results. Lastly, the paper shows how to implement an Uncertainty-Importance analysis using one alternative approach, describes the results, and suggests ways to reduce epistemic uncertainty by focusing on additional data or testing of selected components.

Novack, Steven D.↗

GlennICE Simulation of 24, 28 and 36 Inch Diameter eVTOL Propellers in Forward Flight

Flow solutions and water collection results are presented for three different propeller sizes. Flow solutions were generated using the NASA FUN3D software, and water collection was simulated using NASA GlennICE software. The geometries considered represent experimental articles that have been tested in the NASA Icing Research Tunnel. Each configuration has four blades. For the experiment, the same spinner centerbody is used for each propeller size. The different sized blades are similar for radii larger than about 40% of total span. Operating conditions were chosen to match operating points where experimental data was collected. Results are presented for both single bin simulations, as well as 7-bin Langmuir D distributions. For 80 microns MVD the Langmuir D distribution showed small differences compared to the single bin. For 15 microns MVD the Langmuir D distribution had a larger impact, especially on the spinner. In the experiment, the centerbody was unchanged as propeller size was changed. In this paper, additional simulations were completed with the 36 inch case perfectly scaled down to 24 and 28 inch. The perfect geometric scaling allows for an assessment of the effect of constant centerbody size on the results. While slight differences in pressure distribution on the propeller are visible between scaled and non-scaled centerbody, the effect seems quite minimal regarding water collection. All simulations were run very cold to ensure rime ice, since handling runback water in the non-inertial frame is beyond the scope of the present work. Ice shapes were generated using a single time step growth. The total mass on the blade and spinner was generally underpredicted for 15 microns MVD, and overpredicted for 80 microns MVD. When comparing ice shapes at operating conditions the numerical results produce very similar ice shapes.

Aircraft Icing↗

GlennICE Simulation of 24, 28 and 36 Inch Diameter eVTOL Propellers in Forward Flight

Flow solutions and water collection results are presented for three different propeller sizes. Flow solutions were generated using the NASA FUN3D software, and water collection was simulated using NASA GlennICE software. The geometries considered represent experimental articles that have been tested in the NASA Icing Research Tunnel. Each configuration has four blades. For the experiment, the same spinner centerbody is used for each propeller size. The different sized blades are similar for radii larger than about 40% of total span. Operating conditions were chosen to match operating points where experimental data was collected. Results are presented for both single bin simulations, as well as 7-bin Langmuir D distributions. For 80 microns MVD the Langmuir D distribution showed small differences compared to the single bin. For 15 microns MVD the Langmuir D distribution had a larger impact, especially on the spinner. In the experiment, the centerbody was unchanged as propeller size was changed. In this paper, additional simulations were completed with the 36 inch case perfectly scaled down to 24 and 28 inch. The perfect geometric scaling allows for an assessment of the effect of constant centerbody size on the results. While slight differences in pressure distribution on the propeller are visible between scaled and non-scaled centerbody, the effect seems quite minimal regarding water collection. All simulations were run very cold to ensure rime ice, since handling runback water in the non-inertial frame is beyond the scope of the present work. Ice shapes were generated using a single time step growth. The total mass on the blade and spinner was generally underpredicted for 15 microns MVD, and overpredicted for 80 microns MVD. When comparing ice shapes at operating conditions the numerical results produce very similar ice shapes.

Aircraft Icing↗

Splashdown Visualization of Spent Stages

The state of the art for many Earth-to-orbit trajectory analysis toolsets used at NASA is somewhat dated in terms of the languages they are written in and their user interfaces. Many of these programs are written in languages like Fortran or C that are no longer considered modern in the technology industry, and are command-line based without any means of interpreting the data outputs. This presentation is meant to demonstrate a specific use case for a newly developed web app that visualizes the output data for one of these tools. Specifically, one key usage is to investigate and validate launches for notional multi-stage vehicle concepts to various non-standard high-inclination orbits. Some NASA requirements dictate that trajectories be designed such that no surviving debris lands closer than 200 nautical miles (nm) from foreign landmasses or 27 nm from the continental United States, therefore validating re-entry locations of spent stages is an integral part of the launch planning process. In addition, at programmatic levels it can prove insightful and clarifying for the decision-making process to enhance the technical results of numerical simulations with visualizations. The intent with this tool is to provide the mission analyst and program level management with an intuitive and clear grasp of key information on possible mission scenarios either departing from or arriving at Earth, and in the future, the moon or Mars as well. The software tool was developed with an agile development approach and utilizes the latest frameworks and technologies. The front end uses the React JavaScript library for making a state of the art frontend and a backend based on the Django Python framework for handling data using Python’s powerful and free scientific libraries. In addition, the CesiumJS open-source library is key for visualizing these end-to-end trajectories on a high-resolution Earth model. The presentation will demonstrate the current capability and tested use cases.

Jack Agolli↗

Comprehensive Report of Fan Performance From Duct Rake Instrumentation on 1.294 Pressure Ratio, 806 ft/sec Tip Speed Turbofan Simulator Models

A large scale model representative of an advanced ducted propulsor-type, low-noise, very high bypass ratio turbofan engine was tested for acoustics, aerodynamic performance, and off-design operability in the NASA Glenn 9- by 15-Foot Low-Speed Wind Tunnel. The test was part of NASA s Advanced Subsonic Technology Noise Reduction Program. The low tip speed fan, nacelle, and un-powered core passage were simulated. As might be expected, the effect of stall management casing treatment was a performance penalty. Reducing the recirculating flow at the fan tip reduced the penalty while still providing sufficient stall margin. Two fans were tested with the same aerodynamic design; one with graphite composite material, and the other with solid titanium. There were surprising performance differences between the two fans, though both blades showed some indication of transitional flow near the tips. Though the pressure and temperature ratios were low for this fan design, the techniques used to improve thermocouple measurement accuracy gave repeatable data with adiabatic efficiencies agreeing within 1 percent. The measured fan adiabatic efficiency at simulated takeoff conditions was 93.7 percent and matched the design intent.

Jeracki, Robert J.↗

Using Quasiparticle Poisoning To Detect Photons

According to a proposal, a phenomenon associated with excitation of quasiparticles in certain superconducting quantum devices would be exploited as a means of detecting photons with exquisite sensitivity. The phenomenon could also be exploited to perform medium-resolution spectroscopy. The proposal was inspired by the observation that Coulomb blockade devices upon which some quantum logic gates are based are extremely sensitive to quasiparticles excited above the superconducting gaps in their leads. The presence of quasiparticles in the leads can be easily detected via the charge states. If quasiparticles could be generated in the leads by absorption of photons, then the devices could be used as very sensitive detectors of electromagnetic radiation over the spectral range from x-rays to submillimeter waves. The devices in question are single-Cooper-pair boxes (SCBs), which are mesoscopic superconducting devices developed for quantum computing. An SCB consists of a small superconducting island connected to a reservoir via a small tunnel junction and connected to a voltage source through a gate capacitor. An SCB is an artificial two-level quantum system, the Hamiltonian of which can be controlled by the gate voltage. One measures the expected value of the charge of the eigenvectors of this quantum system by use of a radio-frequency single-electron transistor. A plot of this expected value of charge as a function of gate voltage resembles a staircase that, in the ideal case, consists of steps of height 2 e (where e is the charge of one electron). Experiments have shown that depending on the parameters of the device, quasiparticles in the form of "broken" Cooper pairs present in the reservoir can tunnel to the island, giving rise to steps of 1 e. This effect is sometimes called "poisoning." Simulations have shown that an extremely small average number of quasiparticles can generate a 1-e periodic signal. In a device according to the proposal, this poisoning would be turned to advantage. Depending on the wavelength, an antenna or other component would be used to couple radiation into the reservoir, wherein the absorption of photons would break Cooper pairs, thereby creating quasiparticles that, in turn, would tunnel to the island, creating a 1-e signal. On the basis of conservative estimates of device parameters derived from experimental data and computational simulations that fit the data, it has been estimated that the noise equivalent power of a device according to the proposal could be as low as 6 10(exp -22) W/Hz(exp 1/2). It has also been estimated that the spectroscopic resolution (photon energy divided by increment of photon energy) of such a device in visible light would exceed 100.

Echternach, Pierre↗

Assessment of Retrieved GMI Emissivity Over Land, Snow and Sea Ice in the GEOS System

Measurements from microwave sounders and imagers provide a valuable source of information including atmospheric temperature and water vapor in Numerical Weather Prediction (NWP) systems that assimilate these observations directly over water surfaces (oceans and other large water bodies). In a recent decadal survey, targeted observables in the Planetary Boundary Layer (PBL) were cited as a key need for future observations (NASEM, 2018). Microwave observations which sense in the PBL are currently available, however, utilizing surface-sensitive microwave observations for atmospheric data assimilation remains a challenge over land, snow and sea ice. This is in part due to the inability of surface emissivity models used by NWP data assimilation systems to simulate observations with sufficient accuracy. The GEOS-ADAS (Todling and el Akkraoui, 2018) which utilizes the Community Radiative Transfer Model (CRTM) (Han, 2006; Chen 2009) is no exception. The ECMWF system has retrieved instantaneous surface emissivity from surface-sensitive channels for SSMI/S and MHS radiance observations, and apply these estimates to the closest channels higher in frequency (Baordo and Geer 2016) in the calculation of simulated radiances. This approach currently is also being tested in the GEOS-ADAS for AMSU-A and ATMS radiances (Zhu et al. 2021). No or minimal emissivity spectral variability has been assumed in the above-mentioned studies. Recently, work by Munchak et al., 2020 (hereby referred to as M2020) provided a new database for emissivity over land, snow and sea ice retrieved from the NASA Global Precipitation Mission (GPM). Compared with Tool to Estimate Land Surface Emissivities at Microwave (TELSEM2; Wang et al., 2017), M2020 provides emissivities for more frequencies(i.e., 10.7 GHz V/H). Moreover, this database is unique in that it utilizes both active and passive data to retrieve surface emissivity and normalized radar cross section. While the emissivity values may be useful for other sensors, they are most applicable to the GPM Microwave Imager (GMI). In this work the GEOS-ADAS is modified to utilize emissivity values from Munchak et al, 2020 in place of values used by CRTM. Presently, only GMI radiances over ocean are used in the operational GEOS-ADAS. This study will focus on the GMI radiances over land, snow, and ice, as a first attempt to evaluate GMI radiances over these non-water surface types. Two cases are then presented, one with one week of observation minus background departures using the modified GEOS-ADAS, and one utilizing the original GEOS-ADAS. It should be noted that the surface emissivity models in CRTM are not state of the art and are scheduled to be replaced by the Community Surface Emissivity Module (CSEM; Chen and Weng, 2016). Simulations using default CRTM emissivity values are used merely as reference comparing against M2020, and is not a thorough comparison against other more state of the art modules such as CSEM.

GMI↗

Nuclear Space System Analysis and Modelling (NSSAM): A Software Tool to Efficiently Analyze the Design Space of Space Reactor Systems

Space reactors have the potential to play a key role in future NASA exploration activities due to their capability to enable sustainable power and advanced propulsion systems. To enable assessment of the space reactor design space, the nuclear space system analysis and modelling (NSSAM) software was developed by Analytical Mechanics Associates. NSSAM leverages a scalable and extensible software architecture which automates reactor analysis to perform coupled engine-reactor and reactor physics-thermal hydraulics calculations. This allows space reactor systems to be evaluated by a wider number of users with a consistent analysis approach to compare designs. NSSAM has been developed with multiple use cases to tailor the analysis to the level of detail desired by the user and computing resources. This summary overviews the NSSAM architecture and development approach, current capabilities (including design variants and use cases) and analysis approach for reactor and system component models.

nuclear thermal propulsion↗