Search NASA⌕ Search

SEARCH · Search NASA

Results for “Standard Problem”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,639 records · Page 91

Mercury Dispersion Modeling and Purge Ventilation Stack Height Determination for Tank 42H

The Savannah River National Laboratory (SRNL) Atmospheric Technologies Group performed atmospheric dispersion modeling and analysis of mercury emissions from the H-Tank Farm - Tank 42 ventilation system exhaust to evaluate potential worker exposures to mercury vapor. This analysis was used to establish a minimum stack height at which ambient mercury concentration would not exceed any worker exposure limit. The American Meteorological Society/Environmental Protection Agency Regulatory Model (AERMOD) was used as the dispersion modeling tool for this analysis. Results indicate that the default 10-foot stack results in ground level concentrations that significantly exceed exposure standards for the mercury discharge scenarios evaluated. For a discharge of 25 mg/m 3 , a 50-foot stack was necessary to raise the exhaust plume centerline from Tank 42H to a height that prevents mercury exposure problems for elevated receptors on buildings near the tank. If the discharge concentration is decreased to 10 mg/m 3 , the minimum stack height required to comply with exposure limits is of 40 feet.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

PETSc/TAO Users Manual Revision 3.22

This manual describes the use of the Portable, Extensible Toolkit for Scientific Computation (PETSc) and the Toolkit for Advanced Optimization (TAO) for the numerical solution of partial differential equations (PDEs) and related problems on high-performance computers. PETSc/TAO is a suite of data structures and routines that provide the building blocks for implementing large-scale application codes on parallel (and serial) computers. PETSc uses the MPI standard for all distributed memory communication.

97 MATHEMATICS AND COMPUTING↗

PETSc/TAO Users Manual Revision 3.23

This manual describes the use of the Portable, Extensible Toolkit for Scientific Computation (PETSc) and the Toolkit for Advanced Optimization (TAO) for the numerical solution of partial differential equations (PDEs) and related problems on high-performance computers. PETSc/TAO is a suite of data structures and routines that provide the building blocks for implementing large-scale application codes on parallel (and serial) computers. PETSc uses the MPI standard for all distributed memory communication.

97 MATHEMATICS AND COMPUTING↗

PETSc/TAO Users Manual Revision 3.24

This manual describes the use of the Portable, Extensible Toolkit for Scientific Computation (PETSc) and the Toolkit for Advanced Optimization (TAO) for the numerical solution of partial differential equations (PDEs) and related problems on high-performance computers. PETSc/TAO is a suite of data structures and routines that provide the building blocks for implementing large-scale application codes on parallel (and serial) computers. PETSc uses the MPI standard for all distributed memory communication.

97 MATHEMATICS AND COMPUTING↗

PETSc/TAO Users Manual Revision 3.25

This manual describes the use of the Portable, Extensible Toolkit for Scientific Computation (PETSc) and the Toolkit for Advanced Optimization (TAO) for the numerical solution of partial differential equations (PDEs) and related problems on high-performance computers. PETSc/TAO is a suite of data structures and routines that provide the building blocks for implementing large-scale application codes on parallel (and serial) computers. PETSc uses the MPI standard for all distributed memory communication.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗

A Hybrid Higgs

We construct composite Higgs models admitting a weakly coupled Seiberg dual description. We focus on the possibility that only the up-type Higgs is an elementary field, while the down-type Higgs arises as a composite hadron. The model, based on a confining SQCD theory, breaks supersymmetry and electroweak symmetry dynamically and calculably. This simultaneously solves the {mu}/B{sub {mu}} problem and explains the smallness of the bottom and tau masses compared to the top mass. The proposal is then applied to a class of models where the same confining dynamics is used to generate the Standard Model flavor hierarchy by quark and lepton compositeness. This provides a unified framework for flavor, supersymmetry breaking and electroweak physics. The weakly coupled dual is used to explicitly compute the MSSM parameters in terms of a few microscopic couplings, giving interesting relations between the electroweak and soft parameters. The RG evolution down to the TeV scale is obtained and salient phenomenological predictions of this class of 'single-sector' models are discussed.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Development of a Test Technique to Determine the Thermal Conductivity of Large Refractory Ceramic Test Specimens

A method has been developed to utilize the High Intensity Infrared lamp located at Oak Ridge National Laboratory for the measurement of thermal conductivity of bulk refractory materials at elevated temperatures. The applicability of standardized test methods to determine the thermal conductivity of refractory materials at elevated temperatures is limited to small sample sizes (laser flash) or older test methods (hot wire, guarded hot plate), which have their own inherent problems. A new method, based on the principle of the laser flash method, but capable of evaluating test specimens on the order of 200 x 250 x 50 mm has been developed. Tests have been performed to validate the method and preliminary results are presented in this paper.

36 MATERIALS SCIENCE↗

Neumann Series in MGS-GMRES and Inner-Outer Iterations: Preprint

A low-synchronization MGS-GMRES Krylov solver employing a truncated Neumann series for the inverse compact WY MGS correction matrix T is presented. A corollary to the backward stability result of Paige et al. [1] establishes that T = I - Lk is sufficient for convergence of GMRES when kLkp F = O("p)_p F (B), where the strictly lower triangular matrix L is defined by the inner products of Krylov vectors V T 1:k-2 vk-1. The preconditioner is the classical Ruge-Stuben AMG algorithm with compatible relaxation and inner-outer Gauss-Seidel smoother. This smoother may also be expressed as a truncated Neumann series. Drop tolerances are applied to the lower triangular matrices arising in the smoother in order to reduce the number of non-zeros and accelerate the time to solution. The number of small matrix elements are found to increase from fine to coarse levels and thus the effciency gains are greater for large problems with many levels in the V -cycle. The solver is applied to the pressure continuity equation for the incompressible Navier-Stokes equations. Unlike the inner-outer iteration, the solver convergence rate with the standard Gauss-Seidel smoother deteriorates with dropping. The solver compute time is reduced by up to 50% without a change in the convergence rate.

Gauss-Seidel smoother↗

Screening systems adapt to changing conditions

Prep plants are installing larger screening systems and synthetic media is meeting those challenges. The largest manufacturer of synthetic screen media is Polydeck located in Spartanburg, South Carolina. The company's primary product lines include modular polyurethane and rubber screen panels and the frame systems to support the media. The modular approach overcomes a wear problem in one area of the deck common on Banana screens and facilitates maintenance. A rubber formation used in 1- x 2-pt screen panels called the Flexi design is softer and allows more vibration than standard urethane panels. The Maxi screen panel design combined with the PipeTop II frame makes the system highly versatile. 1 photo.

01 COAL, LIGNITE, AND PEAT↗

A Precision, Low-Cost GPS-Based Synchronization Scheme for Improved AM Reception.

This paper describes a highly accurate carrier-frequency synchronization scheme for actively, automatically locking multiple, remotely located AM broadcast transmitters to a common frequency/timing reference source such as GPS. The extremely tight frequency lock (to ~1 part in 109 or better) permits the effective elimination of audible and even sub-audible beats between the local (desired) station s carrier signal and the distant stations carriers, usually received via skywave propagation during the evening and nighttime hours. These carrier-beat components cause annoying modulations of the desired station s audio at the receiver and concurrent distortion of the audio modulation from the distant station(s) and often cause listeners to tune out due to the poor reception quality. Significant reduction or elimination of the beats and related effects will greatly enlarge the effective (interference-limited) listening area of the desired station (from 4 to 10 times as indicated in our tests) and simultaneously reduce the corresponding interference of the local transmitter to the distant stations as well. In addition, AM stereo (CQUAM) reception will be particularly improved by minimizing the phase shifts induced by co-channel interfering signals; HD will also benefit via reduction in beats from analog signals. The automatic frequency-control hardware described is inexpensive ($1-2K), requires no periodic recalibration, has essentially zero long-term drift, and could employ alternate wide-area frequency references of suitable accuracy, including broadcasts from WWVB, LORAN-C, and equivalent sources. The basic configuration of the GPS-disciplined oscillator which solves this problem is extremely simple. The main oscillator is a conventional high-stability quartz-crystal type. To counter long-term drifts, the oscillator is slightly adjusted to track a high-precision source of standard frequency obtained from a specialized GPS receiver (or other source), usually at 10.000 MHz. This very stable local reference frequency is then used as a clock for a standard digitally implemented frequency synthesizer, which is programmed to generate the specific (AM broadcast) transmitter carrier frequency desired. The stability of the disciplining source, typically ~ 1 part in 109 to 1011, is thus transferred to the final AM transmitter carrier output frequency. Generally, an AM radio listener during the evening and nighttime hours, and to a lesser extent in the early morning, receives undesired skywave signals from several distant stations as well as the desired local (groundwave) signal. If all of these signals are within about 0.01-0.001 Hz of each other, any resulting carrier beats will be of such long periods that the beats will be effectively suppressed by the action of the receiver s AGC circuitry and thus be unnoticeable to the listener. Many modern, synthesizer-based transmitters can directly lock to the precision disciplined 10-MHz source, while older units usually require references at either1 e, 2 e, or 4 e the final frequency. In these latter cases, the existing transmitter crystal can usually be satisfactorily pulled via injection locking. The effectiveness of the synchronization concept to reduce interference effects was demonstrated in a laboratory test setup. Many hours of careful subjective listening were conducted, with the two interfering units both precisely on-frequency with the main unit (synchronous operation) and with the two interferers at various frequency offsets, from below 1 Hz to above 10 Hz.

42 ENGINEERING↗

The International Framework for Maintaining Equivalence and Traceability in Radionuclide Metrology

Confidence that a testing or calibration laboratory consistently obtains reliable results is of major importance to users of laboratory services and participation in proficiency testing schemes provides laboratories with an objective means of assessing and demonstrating the level of confidence that can be ascribed to the reliability of the data they are producing. That level of confidence, in turn, depends on the quality of the proficiency tests and, in particular, on the accuracy of the property values associated with the test samples. In the ideal situation, the relevant property value, such as the activity of a particular radionuclide in a test matrix, will be directly traceable to the SI via comparisons with a national or international metrology institute (NMI). This, in turn, begs the question of, how reliable are the results from that NMI.Demonstration of that reliability at the highest metrological levels is achieved through inter-laboratory comparisons that are conducted between national and international metrological institutes. These are coordinated primarily by the Bureau International des Poids et Mesures (BIPM) via Key Comparisons or by comparisons within Regional Metrological Organisations (RMOs), with the results from those RMO exercises being linked to the BIPM Key Comparison results. Such programmes have been in place for many years but they have grown in importance and frequency over the past decade. Tabulation of these comparison data has been regularized recently and made available to the user communities via the BIPM Key Comparison Database (KCDB).In the field of ionizing radiation, the radionuclide metrology discipline exhibits a number of special features. For example, these include the number of potential radionuclides in a user sample; the variety of physical and chemical formats that may be presented; the statistical and temporal effects of radioactive decay; the variations in primary standardization techniques; and the restricted applicability of those primary standardization techniques to the full range of potential radionuclides and activities. Each of these, singly or in combination, ensure that there can never be a fully comprehensive set of Key Comparisons which will cover the requirements of the user community and, in turn, compromise the ability to provide a full range of proficiency tests for testing and calibration laboratories.These problems are discussed, in the context of radioactivity measurements, together with the structure and range of Key Comparisons and associated databases at the highest international level that are currently in place to underpin the proficiency tests that are necessary for the user communities in this field of application.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Chemical thermodynamic data. 1. The concept of links to the chemical elements and the historical development of key thermodynamic data [plus Supplementary Electronic Annex 2]

Chemical thermodynamic data remain a keystone for geochemical modeling and reactive transport simulation as applied to an increasing number of applications in the earth sciences, as well as applications in other areas including metallurgy, material science, and industrial process design. The last century has seen the development of a large body of thermodynamic data and a number of major compilations. The past several decades have seen the development of thermodynamic databases in digital form designed to support computer calculations. However, problems with thermodynamic data appear to be persistent. One problem pertains to the use of inconsistent primary key reference data. Such data pertain to elemental reference forms and key, stoichiometrically simple chemical species including metal oxides, CO 2 , water, and aqueous species such as Na + and Cl - . A consistent set of primary key data (standard Gibbs energies, standard enthalpies, and standard entropies for key chemical species) for 298.15K and 1 bar pressure is essential. Thermochemical convention is to define the standard Gibbs energy and the standard enthalpy of an individual chemical species in terms of formation from reference forms of the constituent chemical elements. We propose a formal concept of “links” to the elemental reference forms. This concept involves a documented understanding of all reactions and calculations leading to values for a formation property (standard Gibbs energy or enthalpy). A valid link consists of two parts: (a) the path of reactions and corrections and (b) the associated data, which are key data. Such a link differs from a bare “key” or “reference” datum in that it requires additional information. Some or all of its associated data may also be key data. In evaluating a reported thermodynamic datum, one should identify the links to the chemical elements, a process which can be time-consuming and which may lead to a dead end (an incomplete link). The use of two or more inconsistent links to the same elemental reference form in a thermodynamic database will result in an inconsistency in the database. Thus, in constructing a database, it is important to establish a set of reliable links (generally resulting in a set of primary reference data) and then correct all data adopted subsequently for consistency with that set. Recommended values of key data have not been constant through history. We review some of this history through the lens of major compilations and other influential reports, and note a number of problem areas. Finally, we illustrate the concepts developed in this paper by applying them to some key species of geochemical interest, including liquid water; quartz and aqueous silica; and gibbsite, corundum, and the aqueous aluminum ion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Big-Bang Nucleosynthesis and Primordial Lithium Abundance Problem

Prediction of the primordial abundances of elements in the big-bang nucleosynthesis (BBN) is one of the three strong evidences for the big bang model. Precise knowledge of the baryon-to-photon ratio of the Universe from observations of the anisotropies of cosmic microwave background radiation has made the Standard BBN a parameter-free theory. Although, there is a good agreement over a range of nine orders of magnitude between abundances of light elements deduced from observations and calculated in primordial nucleosynthesis, there remains a yet-unexplained discrepancy of {sup 7}Li abundance higher by a factor of ~3 when calculated theoretically. The primordial abundances depend on the astrophysical nuclear reaction rates and on three additional parameters, the number of light neutrino flavors, the neutron lifetime and the baryon-to-photon ratio in the Universe. The effect of the modification of thirty-five reaction rates on light element abundance yields in BBN was investigated earlier by us. In the present work we have incorporated the most recent values of neutron lifetime and the baryon-to-photon ratio and further modified {sup 3}He({sup 4}He, γ){sup 7}Be reaction rate which is used directly for estimating the formation of {sup 7}Li as a result of β{sup +} decay as well as the reaction rates for t({sup 4}He,γ){sup 7}Li and d({sup 4}He,γ){sup 6}Li. We find that these modifications reduce the theoretically calculated abundance of {sup 7}Li by ~12%.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Constraint on slepton intergenerational mixing from big-bang nucleosynthesis

We find constraint on intergenerational mixing of slepton from big-bang nucleosynthesis (BBN). Today, we know that there exist lepton flavor violation (LFV) from the observation of neutrino oscillation, though there do not exist LFV in the standard model of particle physics (SM). LFV in charged lepton sector (cLFV) have also been expected to exist. From theoretical point of view, the effects of long-lived stau on BBN have been investigated and it is known that the stau can solve the cosmological 7Li problem. However, in the study so far, tau flavor is exactly conserved and it contradict with the existence of cLFV. In this study, we generalize the flavor to be violated and call the stau as slepton. Even if the violation is tiny, it drastically changes the lifetime and the evolution of relic density of the slepton. Thus we analyze the effects of the long-lived slepton on BBN, and constrain the magnitude of the cLFV.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Source term method for binary neutron stars initial data

The initial condition problem for a binary neutron star system requires a Poisson equation solver for the velocity potential with a Neumann-like boundary condition on the surface of the star. Difficulties that arise in this boundary value problem are: (a) the boundary is not known a priori, but constitutes part of the solution of the problem; (b) various terms become singular at the boundary. In this work, we present a new method to solve the fluid Poisson equation for irrotational/spinning binary neutron stars. The advantage of the new method is that it does not require complex fluid surface fitted coordinates and it can be implemented in a Cartesian grid, which is a standard choice in numerical relativity calculations. This is accomplished by employing the source term method proposed by Towers, where the boundary condition is treated as a jump condition and is incorporated as additional source terms in the Poisson equation, which is then solved iteratively. The issue of singular terms caused by vanishing density on the surface is resolved with an additional separation that shifts the computation boundary to the interior of the star. We present two-dimensional tests to show the convergence of the source term method, and we further apply this solver to a realistic three-dimensional binary neutron star problem. By comparing our solution with the one coming from the initial data solver cocal, we demonstrate agreement to approximately 1%. We report our method can be used in other problems with non-smooth solutions like in magnetized neutron stars.

79 ASTRONOMY AND ASTROPHYSICS↗

ON MORE SENSITIVE PERIODOGRAM STATISTICS

Period searches in event data have traditionally used the Rayleigh statistic, R {sup 2}. For X-ray pulsars, the standard has been the Z {sup 2} statistic, which sums over more than one harmonic. For γ-rays, the H-test, which optimizes the number of harmonics to sum, is often used. These periodograms all suffer from the same problem, namely artifacts caused by correlations in the Fourier components that arise from testing frequencies with a non-integer number of cycles. This article addresses this problem. The modified Rayleigh statistic is discussed, its generalization to any harmonic, R{sub k}{sup 2}, is formulated, and from the latter, the modified Z {sup 2} statistic, Z{sup 2}, is constructed. Versions of these statistics for binned data and point measurements are derived, and it is shown that the variance in the uncertainties can have an important influence on the periodogram. It is shown how to combine the information about the signal frequency from the different harmonics to estimate its value with maximum accuracy. The methods are applied to an XMM-Newton observation of the Crab pulsar for which a decomposition of the pulse profile is presented, and shows that most of the power is in the second, third, and fifth harmonics. Statistical detection power of the R{sub k}{sup 2} statistic is superior to the FFT and equivalent to the Lomb--Scargle (LS). Response to gaps in the data is assessed, and it is shown that the LS does not protect against the distortions they cause. The main conclusion of this work is that the classical R {sup 2} and Z {sup 2} should be replaced by R{sub k}{sup 2} and Z{sup 2} in all applications with event data, and the LS should be replaced by the R{sub k}{sup 2} when the uncertainty varies from one point measurement to another.

79 ASTRONOMY AND ASTROPHYSICS↗

A computationally efficient parallel Levenberg-Marquardt algorithm for highly parameterized inverse model analyses

Inverse modeling seeks model parameters given a set of observations. However, for practical problems because the number of measurements is often large and the model parameters are also numerous, conventional methods for inverse modeling can be computationally expensive. We have developed a new, computationally-efficient parallel Levenberg-Marquardt method for solving inverse modeling problems with a highly parameterized model space. Levenberg-Marquardt methods require the solution of a linear system of equations which can be prohibitively expensive to compute for moderate to large-scale problems. Our novel method projects the original linear problem down to a Krylov subspace, such that the dimensionality of the problem can be significantly reduced. Furthermore, we store the Krylov subspace computed when using the first damping parameter and recycle the subspace for the subsequent damping parameters. The efficiency of our new inverse modeling algorithm is significantly improved using these computational techniques. We apply this new inverse modeling method to invert for random transmissivity fields in 2D and a random hydraulic conductivity field in 3D. Our algorithm is fast enough to solve for the distributed model parameters (transmissivity) in the model domain. The algorithm is coded in Julia and implemented in the MADS computational framework (http://mads.lanl.gov). By comparing with Levenberg-Marquardt methods using standard linear inversion techniques such as QR or SVD methods, our Levenberg-Marquardt method yields a speed-up ratio on the order of ~10 1 to ~10 2 in a multi-core computational environment. Furthermore, our new inverse modeling method is a powerful tool for characterizing subsurface heterogeneity for moderate- to large-scale problems.

97 MATHEMATICS AND COMPUTING↗

The Schwarz alternating method for transient solid dynamics

Abstract In our earlier work, we formulated the Schwarz alternating method as a means for concurrent multiscale coupling in finite deformation solid mechanics for quasi‐static problems. Herein, we advance this method for the study of transient dynamic multiscale solid mechanics problems where information is exchanged back and forth between small and large scales. The extension to dynamics relies on the notion of a global time stepper. Within each global time step, the subdomains are coupled by the standard Schwarz iterative process. Remarkably, each subdomain can use its own time step or even its own time integrator to advance its solution in time, provided that they synchronize at each global time step. We study the performance of the Schwarz method on several examples designed for this purpose. Our numerical experiments demonstrate that the method is capable of coupling regions with different mesh resolutions, different element types, and different time integration schemes (e.g., implicit and explicit), all without introducing any artifacts that afflict other coupling methods for transient dynamics. Finally, we apply the dynamic Schwarz alternating method to the simulation of a bolted joint subjected to dynamic loading, as a demonstration of the performance of the method in a realistic scenario.

Mota, Alejandro↗