Search NASA⌕ Search

SEARCH · Search NASA

Results for “Structural variation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,639 records · Page 91

High-precision frequency measurement of the 423-nm Ca i line

We have performed an accurate frequency calibration of the 4s{sup 2} {sup 1}S{sub 0{yields}}4s4p {sup 1}P{sub 1} principal resonance line of the neutral calcium atom at 423 nm. Doppler-free cw excitation on a Ca atomic beam was performed by utilizing a Sagnac geometry in the alignment of the excitation beams. From frequency calibrations against a frequency comb, stabilized to a global positioning system (GPS) disciplined Rb standard, the transition frequency is determined at 709 078 373.01(35) MHz for the main {sup 40}Ca isotope. Slightly lower accuracies are obtained for the transition frequencies of the less abundant isotopes. The achieved fractional uncertainty of 5x10{sup -10} exceeds the requirements for including this transition in investigations that aim to probe a possible variation in the fine-structure constant {alpha} on cosmological time scales.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Nanoscale magnetic phase competition throughout the Ni 50– x Co x Mn 40 Sn 10 phase diagram: Insights from small-angle neutron scattering

The Ni 2 MnSn-derived Ni 50– x Co x Mn 25+ y Sn 25– y alloys are premier examples of a class of off-stoichiometric Heusler alloys recently discovered to exhibit attractive magnetic properties in tandem with extraordinarily reversible martensitic phase transformations. Multiferroicity, magnetic phase competition and separation, field-induced martensitic transformations, magnetic shape memory behavior, and sizable magneto-, elasto-, and barocaloric effects result, generating substantial interest and application potential. In this work we expand on a prior small-angle neutron scattering (SANS) study at a single composition (Ni 44 Co 6 Mn 40 Sn 10 ) by exploring all three main regions of the recently established Ni 50–x Co x Mn 40 Sn 10 phase diagram, i.e., at the representative y = 15 composition. Wide temperature and scattering wave-vector range (20–500K, 0.004–0.2Å –1 ) SANS data on x = 2, 6, and 14 polycrystals provide a detailed picture of the evolution in magnetic order and inhomogeneity. Consistent with recent studies with a variety of techniques, phase separation into short-range coexisting ferromagnetic and antiferromagnetic regions is deduced below the martensitic transformation at x = 2 and 6, with average ferromagnetic cluster spacing of ~13 nm. Remarkably, at x = 14, where the martensitic transformation is suppressed and ferromagnetic austenite is stabilized to low temperatures, nanoscopic magnetic inhomogeneity nevertheless persists. Further, distinct ferromagnetic clusters (~36-nm average spacing) in a ferromagnetic matrix are observed at intermediate temperatures, homogenizing into a uniform long-range ordered ferromagnet only at low temperatures. This unusual ferromagnet cluster/ferromagnet matrix inhomogeneity, as well as x -dependent subtleties of the superparamagnetic freezing of ferromagnetic clusters, are discussed in light of 55 Mn nuclear magnetic resonance data, and the recent observation of annealing-induced core/shell nanoprecipitates. The origins of nanoscalemagnetic inhomogeneity are discussed in terms of statistical variations in local composition and structure, tendency to chemical phase separation, and other forms of disorder.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Probing configurational disorder in ZnGeN 2 using cluster-based Monte Carlo

ZnGeN 2 is sought as a semiconductor with comparable lattice constant to GaN and tunable band gap for integration in optoelectronic devices. Configurational disorder on the cation sublattice of ZnGeN 2 can strongly modify the electronic structure compared to the ordered material, and both ordered and disordered forms of ZnGeN 2 are candidates for light-emitting diodes and other emitters. The nonisovalent character of the disordered species (Zn 2+ and Ge 4+ ) subjects the cation ordering to strong short-range order effects. To model these effects, we use Monte Carlo (MC) simulations utilizing a cluster expansion to approximate formation enthalpy. Representative disordered configurations in 1024-atom supercells are relaxed in density functional theory calculations. From the MC structures, we extract a short-range order parameter (the N-cation coordination motif), and two long-range order parameters (Bragg-Williams and stretching parameters), and examine their correlations. We perform a thermodynamic integration to determine the mixing entropy and free energy. ZnGeN 2 exhibits a first-order phase transition with pronounced discontinuities in enthalpy and entropy, as well as in the structural order parameters. We discuss the relationship between the effective temperature used in the MC simulation and the growth temperatures in experiment in relation to the crossover from the nonequilibrium to the equilibrium growth regime. This work expands on current models of site disorder in ZnGeN 2 and provides atomic structure models with a systematic variation of the degree of cation disorder.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effects of the surface termination and the oxygen vacancy position on LaNiO 3 ultra-thin films: First-principles study

In this study, while ultra-thin layers of the LaNiO 3 film exhibit a remarkable metal-insulator transition as the film thickness becomes smaller than a few unit cell (u.c.), the formation of possible oxygen vacancies and their effects on the correlated electronic structure have been rarely studied using first principles. Here, we investigate the effects of the surface termination and the oxygen vacancy position on the electronic properties and vacancy energetics of LaNiO 3 ultra-thin films under the compressive strain using density functional theory plus U (DFT + U). We find that oxygen vacancies can be easily formed in the Ni layers with the NiO 2 terminated surface (0.5 u.c. and 1.5 u.c. thickness) compared to the structures with the LaO terminated surface and the in-plane vacancy is energetically favored than the out-of-plane vacancy. When two vacancy sites are allowed, the Ni square plane geometry is energetically more stable in most cases as two oxygen vacancies tend to stay near a Ni ion. Strong anisotropy between the in-plane and out-of-plane vacancy formation as well as the layer and orbital dependent electronic structure occur due to strain, surface termination, charge reconstruction, and quantum confinement effects. The in-plane vacancy of the NiO 2 terminated structure is favored since the released charge due to the oxygen vacancy can be easily accommodated in the d x 2 -y 2 orbital, which is less occupied than the d z 2 orbital. Remarkably, the oxygen vacancy structure containing the Ni square-plane geometry becomes an insulating state in DFT + U with a sizable band gap of 1.2 eV because the large crystal field splitting between d z 2 and d x 2 -y 2 orbitals in the square-plane favors an insulating state and the Mott insulating state is induced in other Ni sites due to strong electronic correlations. In the thin-film structure without oxygen vacancies, the strong correlation effect in DFT + U drives a pseudogap ground state at the Fermi energy, similarly as the experimental photo-emission spectra; however, the variation of the DFT + U electronic structure depending on the surface termination becomes weaker compared to those obtained in DFT.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Calculating Behind-the-Meter Energy Storage Incentives on an Avoided Cost Basis

Behind-the-meter (BTM) energy storage offers the potential for shared investment by utilities and their customers, in which both parties share in the costs and benefits of battery investment. Several utilities and a handful of states have begun providing incentives to help customers purchase BTM energy storage, and in exchange, operate that battery on behalf of the customer to realize grid benefits such as meeting peak capacity needs. But there is wide variation in the value and structure of these incentives, suggesting a lack of clarity on the value of BTM storage to the grid and to non-participating customers who fund the incentives for participating customers. This paper provides an objective framework for establishing BTM energy storage incentives based on the avoided cost of generation from a marginal, gas-fired peaking plant. It also conducts several sensitivity analyses to see how those avoided costs vary with emissions pricing, gas prices, plant heat rates, and utility capital structures. This work may be of use to utilities, regulators, and energy system stakeholders in providing a value-based framework for BTM incentive programs that can be used in the absence of policy guidance.

Twitchell, Jeremy B.↗

Analysis of Multilayer Devices for Superconducting Electronics by High-Resolution Scanning Transmission Electron Microscopy and Energy Dispersive Spectroscopy

We used a focused ion beam to obtain cross-sectional specimens from both magnetic multilayer and Nb/Al-AlOx/Nb Josephson junction devices for characterization by scanning transmission electron microscopy (STEM) and energy dispersive X-ray spectroscopy (EDX). An automated multivariate statistical analysis of the EDX spectral images produced chemically unique component images of individual layers within the multilayer structures. STEM imaging elucidated distinct variations in film morphology, interface quality, and/or etch artifacts that could be correlated to magnetic and/or electrical properties measured on the same devices.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

A Double-side Cooled SiC MOSFET Power Module with Sintered-silver Interposers: I. Design, Simulation, Fabrication, and Performance Characterization

Planar, double-side cooled power modules are emerging in electric-drive inverters because of their low profile, better heat extraction, and lower package parasitic inductances. However, there is still concern about their reliability due to the rigid interconnection between the device chips and two substrates of the power module. In this paper, a porous interposer made of low-temperature sintered silver is introduced to reduce the thermo-mechanical stresses in the module. A double-side cooled half-bridge module consisting of two 1200 V, 149 A SiC MOSFETs was designed, fabricated, and characterized. By using the sintered-Ag instead of solid copper interposers, our simulation results showed that at a total power loss of 200 W, the thermo-mechanical stress at the most vulnerable interfaces (interposer-attach layer) was reduced by 42 % and in the SiC MOSFET by 50 % with a trade-off of only 3.6 % increase in junction temperature. The sintered-Ag interposers were readily fabricated into desired dimensions without post-machining and did not require any surface finishing for die-bonding and substrate interconnection by silver sintering. Here, the porous interposers were also deformable under a low force or pressure, which helped to accommodate chip thickness and/or substrate-to-substrate gap variations in the planar module structure, thus simplifying module fabrication. Experimental results on the electrical performance of the fabricated SiC modules validated the success of using the porous silver interposers for fabricating planar, double-side cooled power modules.

42 ENGINEERING↗

Structural, optical, and electrical properties of NiO-In composite films deposited by radio frequency cosputtering

In-doped NiO films with indium concentrations ranging from 0 to 30.3 at. % were deposited on glass substrates to investigate corresponding structural, optical, and electrical property variations. The x-ray diffraction patterns show that all films display only NiO peaks. When In atoms were added to NiO films, the NiO peaks shifted to lower angles, indicating that the lattice parameters of the films increased due to the larger In ions substituting for the smaller Ni ions. An electrical resistivity (ρ) too high to be measured occurred when the indium concentration in the NiO film was less than 15.6 at. %. The ρ value dropped significantly to 0.06 Ω·cm as the indium concentration increased to 26.9 at. %. Upon further raising the In to 30.3 at. %, the ρ value decreased further to 0.01 Ω·cm. All the In-doped NiO films showed n-type conduction. The transmittance of undoped NiO film is as high as 96%. On raising the indium concentration to 15.6, 19.9, 26.9, and 30.3 at. %, the transmittances decreased further to 68%, 62%, 57%, and 47%, respectively. Introducing higher In concentrations improved the films’ thermal stability of electrical resistivity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electrical and photoelectric characteristics of structures based on InSe and GaSe layered semiconductors irradiated with 12.5-MeV electrons

The effect of irradiation with 12.5-MeV electrons on the electrical and photoelectric parameters of layered photoconverters based on p-InSe-n-InSe and p-GaSe-n-InSe structures is studied. The observed variations in the current-voltage characteristics, photoresponse spectra, open-circuit voltage, and short-circuit current are caused by the formation of point defects. The absence of pronounced changes in the characteristics of the homojunctions and heterojunctions even after irradiation at the highest dose makes it possible to recommend these junctions for use in the fabrication of radiation-resistant photodetectors.

36 MATERIALS SCIENCE↗

HIV Promoter Integration Site Primarily Modulates Transcriptional Burst Size Rather Than Frequency

Mammalian gene expression patterns, and their variability across populations of cells, are regulated by factors specific to each gene in concert with its surrounding cellular and genomic environment. Lentiviruses such as HIV integrate their genomes into semi-random genomic locations in the cells they infect, and the resulting viral gene expression provides a natural system to dissect the contributions of genomic environment to transcriptional regulation. Previously, we showed that expression heterogeneity and its modulation by specific host factors at HIV integration sites are key determinants of infected-cell fate and a possible source of latent infections. Here, we assess the integration context dependence of expression heterogeneity from diverse single integrations of a HIV-promoter/GFP-reporter cassette in Jurkat T-cells. Systematically fitting a stochastic model of gene expression to our data reveals an underlying transcriptional dynamic, by which multiple transcripts are produced during short, infrequent bursts, that quantitatively accounts for the wide, highly skewed protein expression distributions observed in each of our clonal cell populations. Interestingly, we find that the size of transcriptional bursts is the primary systematic covariate over integration sites, varying from a few to tens of transcripts across integration sites, and correlating well with mean expression. In contrast, burst frequencies are scattered about a typical value of several per cell-division time and demonstrate little correlation with the clonal means. This pattern of modulation generates consistently noisy distributions over the sampled integration positions, with large expression variability relative to the mean maintained even for the most productive integrations, and could contribute to specifying heterogeneous, integration-site-dependent viral production patterns in HIV-infected cells. Genomic environment thus emerges as a significant control parameter for gene expression variation that may contribute to structuring mammalian genomes, as well as be exploited for survival by integrating viruses.

59 BASIC BIOLOGICAL SCIENCES↗

Measuring and Modeling the Earth's Gravity - Introduction to Ground-Based Gravity Surveys and Analysis of Local Gravity Data

We can measure changes in gravity from place to place on the earth. These measurements require careful recording of location, elevation and time for each reading. These readings must be adjusted for known effects (such as elevation, latitude, tides) that can bias our data and mask the signal of interest. After making corrections to our data, we can remove regional trends to obtain local Bouguer anomalies. The Bouguer anomalies arise from variations in the subsurface density structure. We can build models to explain our observations, but these models must be consistent with what is known about the local geology. Combining gravity models with other information – geologic, seismic, electromagnetic, will improve confidence in the results.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Residential Electricity Prices: A Review of Data Sources and Estimation Methods

This paper presents an empirical study of residential electricity prices based on a compilation of tariff data collected for Lawrence Berkeley Lab's Tariff Analysis Project (TAP). We also review other data sources commonly used to estimate residential sector electricity prices, including utility data published by the Energy Information Administration (EIA), the Typical Bills reports published by the Edison Electric Institute, and household-level electricity consumption and expenditure data included with the EIA's Residential Energy Consumption Surveys. We define three different types of price that can be estimated from the data, construct estimation methods, compare the results and evaluate the relative strengths and weaknesses of each approach. We examine several sources of variation including seasonal, regional, industry structure, and the magnitude of baseline household consumption. The tariff data are also used to explore the impact of moving households from standard tariffs to time-of-use pricing, and to summarize how this affects predictions of electricity bill savings for both demand reduction and demand shifting. (auth)

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Machine Learning for Slow Extraction Uniformity at the Fermilab Delivery Ring

This poster presents preliminary investigations into beam spill quality at the Fermilab Delivery Ring using real commissioning data to better understand extraction uniformity for the Mu2e experiment. Analysis explores spill intensity structure, spill-to-spill variation, and system response to injected impulses across multiple run conditions. These findings aim to contribute to ongoing efforts toward surrogate model development for real-time spill regulation.

Prescott, Matthew J. [Purdue U., West Lafayette]↗

Carbon Storage and Enhanced Oil Recovery in Pennsylvanian Morrow Formation Clastic Reservoirs: Controls on Oil–Brine and Oil–CO2 Relative Permeability from Diagenetic Heterogeneity and Evolving Wettability

The efficiency of carbon utilization and storage within the Pennsylvanian Morrow B sandstone, Farnsworth Unit, Texas, is dependent on three-phase oil, brine, and CO2 flow behavior, as well as spatial distributions of reservoir properties and wettability. We show that end member two-phase flow properties, with binary pairs of oil–brine and oil–CO2, are directly dependent on heterogeneity derived from diagenetic processes, and evolve progressively with exposure to CO2 and changing wettability. Morrow B sandstone lithofacies exhibit a range of diagenetic processes, which produce variations in pore types and structures, quantified at the core plug scale using X-ray micro computed tomography imaging and optical petrography. Permeability and porosity relationships in the reservoir permit the classification of sedimentologic and diagenetic heterogeneity into five distinct hydraulic flow units, with characteristic pore types including: macroporosity with little to no clay filling intergranular pores; microporous authigenic clay-dominated regions in which intergranular porosity is filled with clay; and carbonate–cement dominated regions with little intergranular porosity. Steady-state oil–brine and oil–CO2 co-injection experiments using reservoir-extracted oil and brine show that differences in relative permeability persist between flow unit core plugs with near-constant porosity, attributable to contrasts in and the spatial arrangement of diagenetic pore types. Core plugs “aged” by exposure to reservoir oil over time exhibit wettability closer to suspected in situ reservoir conditions, compared to “cleaned” core plugs. Together with contact angle measurements, these results suggest that reservoir wettability is transient and modified quickly by oil recovery and carbon storage operations. Reservoir simulation results for enhanced oil recovery, using a five-spot pattern and water-alternating-with-gas injection history at Farnsworth, compare models for cumulative oil and water production using both a single relative permeability determined from history matching, and flow unit-dependent relative permeability determined from experiments herein. Both match cumulative oil production of the field to a satisfactory degree but underestimate historical cumulative water production. Differences in modeled versus observed water production are interpreted in terms of evolving wettability, which we argue is due to the increasing presence of fast paths (flow pathways with connected higher permeability) as the reservoir becomes increasingly water-wet. The control of such fast-paths is thus critical for efficient carbon storage and sweep efficiency for CO2-enhanced oil recovery in heterogeneous reservoirs.

Rasmussen, Lindsey↗

Organocatalytic Upgrading of Furfural and 5-Hydroxymethyl Furfural to C 10 and C 12 Furoins with Quantitative Yield and Atom-Efficiency

There is increasing interest in the upgrading of C 5 furfural (FF) and C 6 5-hydroxymethyl furfural (HMF) into C 10 and C 12 furoins as higher energy-density intermediates for renewable chemicals, materials, and biofuels. This work utilizes the organocatalytic approach, using the in situ generated N,S-heterocyclic carbene catalyst derived from thiazolium ionic liquids (ILs), to achieve highly efficient self-coupling reactions of FF and HMF. Specifically, variations of the thiazolium IL structure have led to the most active and efficient catalyst system of the current series, which is derived from a new thiazolium IL carrying the electron-donating acetate group at the 5-ring position. For FF coupling by this IL (0.1 mol %, 60 °C, 1 h), when combined with Et 3 N, furoin was obtained in >99% yield. A 97% yield of the C 12 furoin was also achieved from the HMF coupling by this catalyst system (10 mol % loading, 120 °C, 3 h). On the other hand, the thiazolium IL bearing the electron-withdrawing group at the 5-ring position is the least active and efficient catalyst. The mechanistic aspects of the coupling reaction by the thiazolium catalyst system have also been examined and a mechanism has been proposed.

09 BIOMASS FUELS↗

Analysis of solar X-ray data

Type III solar bursts occurring in the absence of solar flares were observed to be accompanied by weak X-radiation. The energy scale of an OSO-3 soft X-ray ion chamber was assessed using realistic theoretical X-ray spectra. Relationships between soft solar X-rays and solar activity were investigated. These included optical studies, the role of the Type III acceleration mechanism in establishing the soft X-ray source volume, H alpha flare intensity variations, and gross magnetic field structure.

Teske, R. G.↗

Ion and electron temperatures in the SUMMA mirror device by emission spectroscopy

Ion and electron temperatures, and ion drift were measured in a superconducting magnetic mirror apparatus by observing the Doppler-broadened charge-exchange component of the 667.8 and 587.6 nanometer He lines in He plasma, and the H sub alpha and H sub beta lines in H2 plasma. The second moment of the line profiles was used as the parameter for determining ion temperature. Corrections for magnetic splitting, fine structure, monochromator slit function, and variation in charge-exchange cross section with energy are included. Electron temperatures were measured by the line ratio method for the corona model, and correlations of ion and electron temperatures with plasma parameters are presented.

Patch, R. W.↗