SEARCH · Search NASA

Results for “Trajectory analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,639 records · Page 91

All sources NASA NTRS DOE OSTI

NASA NTRS2022

Human Stability While Exercising on a VIS Device in Zero Gravity

BACKGROUND: A Vibration Isolation and Stabilization (VIS) system is being designed for use with the European Enhanced Exploration Exercise Device (E4D) [1]. The exercise bar is attached to cables that extend and retract through openings in the E4D platform, which the subject stands on while exercising. Since the E4D is mounted on a moving VIS device, the whole system moves under the subject’s feet. While tension in the cables does help stabilize a crew member in 0g by bracing him or her against the moving platform, flexible cables do not offer full support against falling. This raises the question of whether various exercises that are successfully performed in 1g on a stationary device can be performed without losing balance in 0g on a moving device. Quantifying stability conditions and establishing stability requirements for exercise countermeasure systems is a long-standing challenge and this work helped to inform this specific need for integrated E4D/VIS flight project development. METHODS AND RESULTS: A simplified stability analysis can be attempted based on platform accelerations generated by the VIS device simulation. In this type of analysis, the subject is conceived as standing on the platform in 0g while being held down to it by the tension in the cables. If the sideways acceleration of the platform is such that the cables cannot generate a sufficient moment relative to, e.g., the heels or the toes of the subject to overcome the tipping moment from the inertial forces on the accelerated subject’s body, the subject becomes unstable. This approach, which we refer to as the ‘static’ approximation, indicated failure of all the exercises that were considered in the comprehensive VIS analysis of the E4D. It was realized, however, that platform accelerations are not externally imposed but are themselves induced by the motion of the subject’s body during exercise, and a model calculation confirmed that this drastically altered the tipping moment on the subject, with the potential to even switch the direction in which the body would tip over. This made it imperative to consider in a coupled manner both the motion of the exercising subject’s body and the induced VIS platform motion while considering stability. The coupled dynamics requirement was met by the VIS simulation incorporating time-dependent human mass properties atop the platform and driven by the inertial forces from the prescribed subject motion relative to the platform based on motion-capture recorded human trajectories in 1g on a stationary E4D [2]. To analyze simulation results, a stability criterion was also needed. We do not know how to account for the human ‘control system’ that would take visual and vestibular cues as inputs as the platform moves in 0g. We thus chose to follow an approach we had previously used to analyze the dynamic feasibility of performing a task in lunar gravity along the human body trajectory recorded in 1g [3]. In this approach, one analyzes the center of pressure (COP) between the shoes and the ground (or platform) and checks if the COP remains within the convex hull of the footprints on the ground (or platform), commonly referred to as base of support (BOS). Since pressure is vertical and, in the absence of foot restraints, positive, the COP going outside the BOS indicates that the trajectory recorded in 1g is not dynamically feasible in microgravity and/or on the moving platform of the device. The outcome of the COP-based analysis was that some of the key exercises, especially the deadlift and the back squat exercises, were found to be dynamically feasible for at least some number of the exercise cycles, this number increasing with the cable tension. While this type of stability analysis does not account for the likely alteration of the exercise trajectory from its 1g form in space, it does show that there exist at least some realistic trajectories that pass the dynamic feasibility criterion. This adds confidence that, with further adjustment by the subject of the exercise form in 0g on a moving device, a number of exercises can be performed without losing balance.

D Frenkel↗

NASA NTRS1994

Hierarchical Control and Trajectory Planning

Most of the time on this project was spent on the trajectory planning problem. The construction is equivalent to the classical spline construction in the case that the system matrix is nilpotent. If the dimension of the system is n then the spline of degree 2n-1 is constructed. This gives a new approach to the construction of splines that is more efficient than the usual construction and at the same time allows the construction of a much larger class of splines. All known classes of splines are reconstructed using the approach of linear control theory. As a numerical analysis tool control theory gives a very good tool for constructing splines. However, for the purposes of trajectory planning it is quite another story. Enclosed in this document are four reports done under this grant.

Martin, Clyde F.↗

NASA NTRS1977

Navigation capability for an ion drive rendezvous with Halley's Comet

An analysis has been conducted in connection with plans for a study of Halley's Comet during its 1986 apparition. The use of low-thrust vehicles, utilizing an ion drive system, is being considered for a comet rendezvous mission. A preliminary trajectory for the Halley rendezvous mission calls for launch on June 20, 1982, followed by rendezvous on December 21, 1985. The navigation analysis described focuses on the terminal approach to Halley, the 60-day period preceding rendezvous. Navigation analysis assumptions are examined, taking into account navigation error sources, radio tracking, onboard optical data, earth-based comet observations, and orbit determination and guidance strategies. The preliminary mission design considers a rendezvous at approximately 56,000 km from the comet nucleus (6,000 km outside the dust envelope). Navigation performance is measured in terms of comet-relative position and velocity errors at encounter. Variations to the baseline navigation study provide illustrations concerning the close link between delivery accuracy and stochastic thrust errors.

Thornton, C. L.↗

NASA NTRS2019

Comparing Flood-Producing Catastrophic Hurricanes in GEOS: A Study of Juan 1985 and Harvey 2017

Hurricanes Juan (1985) and Harvey (2017) bear remarkable similarities because of the exceptional amount of accumulated precipitation over coastal regions in the Gulf, consequent to the peculiar and rare situation in which a hurricane stalls for several days on a coastal area, displaying minimal progress. This is particularly dangerous because: a) terrestrial drag affect only part of the circulation so that weakening is not as fast as when there is rapid motion inland; b) a part of the circulation remains over water and as such low-level moisture flux convergence is maintained; c) precipitation lasts for a very long time over the same area; d) moisture recycling from flooded areas further contributes to maintaining flood conditions. From the forecast perspective, hurricanes with track singularities such as stalling points, loops, or multiple landfalls over the same region are exceptionally difficult to predict because they result from small variations of opposing mechanisms and are therefore intrinsically unstable. Intensity fluctuations and track singularities are strongly coupled. The representation of fluxes undergoing differential drag (ocean vs. land) inside the same circulation is critically dependent upon resolution. Recent modeling development efforts within the NASA Global Modeling and Assimilation Office (GMAO) have brought the horizontal resolution of the global cubed-sphere Goddard Earth Observing System (GEOS) atmospheric model down to 12 km. This has led to innovative findings in the field of tropical cyclone (TC) modeling within a global framework. The GEOS atmospheric model and data assimilation system (DAS), used to produce the MERRA-2 (Modern Era Retrospective analysis for Research and Applications) reanalysis, has a "Replay" capability that adds a forcing term to the model equations to constrain it to follow a specified trajectory. This capability is used to produce global, downscaled versions of the 50 km MERRA-2 reanalysis at a 12.5 km resolution. The full DAS and replay modes both use the Incremental Analysis Update or IAU for applying an analysis increment to the model's background state four times each day at 00Z, 06Z, 12Z and 18Z. In a full DAS mode, a six-hour free run of the model is made (Predictor Step), writing states that will be used as backgrounds or first-guesses for the analysis centered on 00Z. The Analysis system then produces its best estimate of the 00Z state by blending backgrounds with observations. The difference between this best estimate and the model's original first guess at 00Z is treated as an analysis increment and added uniformly as a forcing term to the model during a second, now forced, run of the 12Z to 03Z window, which produces the assimilated results. Replay mode is very similar, except only the 00Z background is needed from the predictor segment, which is thus half as long, and instead of doing an analysis, a previously analyzed state at 00Z is read in. The increment is then computed and applied to the corrector step in the same way as in the original DAS. When downscaling horizontal spatial filters can be applied to the "analysis" increment used to force the Corrector step, so as to reproduce the full meteorological state or selectively choose or discard certain forcings. In this presentation, full global hindcast simulations of Juan and operational forecasts of Harvey are compared.

Flooding↗

NASA NTRSDate not supplied

EARLY INFORMATION PARAMETER-SET ANALYSIS FOR SATELLITE CLOSE APPROACHES USING MACHINE LEARNING

In spaceflight navigation applications, understanding and accurately applying orbital mechanics by leveraging force models for trajectory predictions will always remain an important aspect in space mission design and operations. In the process of capturing the dynamics and perturbations in the space environment, the force models are not all encompassing in that these models are subject to errors, commonly referred to as process noise. Therefore, in predicting state vectors of space objects such as spacecraft or debris over long periods of time, these errors in the process noise tend to grow over time.

machine learning↗

NASA NTRS1982

Galactic cosmic ray gradients, field-aligned and latitudinal, among Voyagers 1/2 and IMP-8

The present investigation represents a summary of a comprehensive analysis of the same subject conducted by Roelof et al. (1981). It is pointed out that the tandem earth-Jupiter trajectories of the Voyager 1/2 spacecraft, combined with baseline measurements from the earth-orbiting IMP 7/8 spacecraft, provide the first opportunity for unambiguously separating latitude from radial or field-aligned effects in galactic cosmic ray gradients. Attention is given to the method of data analysis, and the separation of field-aligned and latitudinal gradients. It is found that latitudinal gradients approximately equal to or greater than 1 percent per deg in the cosmic ray intensity were a common feature of the interplanetary medium between 1 and 5 AU in 1977-78. Except in the most disturbed periods, cosmic ray intensities are well-ordered in field-aligned structures.

Roelof, E. C.↗

NASA NTRS1986

Plasmasphere formation in arbitrarily oriented magnetospheres

The formation of plasmaspheres in planetary magnetospheres with arbitrary orientations of the rotation and magnetic dipole axes is investigated. A traditional plasmasphere with closed orbits inside the plasmapause and open trajectories outside it only occurs for the limiting case of aligned rotation and dipole axes. A time-variable plasmapause exists if the rotation axis is perpendicular to the solar win flow direction. In any other case, no definite plasmapause exists. Solar wind-driven convection transports plasma throughout the magnetosphere with an effectiveness which increases as the orientation goes further from one of the two limiting cases of strict plasmapause formation. The present analysis is applied to earth and Uranus using the actual orientations of the rotation and dipole axes. Particle trajectories at earth deviate only slightly from those obtained with traditional models. Uranus has no plasmasphere, and plasma convects sunwards throughout the inner magnetosphere.

Selesnick, R. S.↗

NASA NTRS2000

Stardust Navigation Covariance Analysis

The Stardust spacecraft was launched on February 7, 1999 aboard a Boeing Delta-II rocket. Mission participants include the National Aeronautics and Space Administration (NASA), the Jet Propulsion Laboratory (JPL), Lockheed Martin Astronautics (LMA) and the University of Washington. The primary objective of the mission is to collect in-situ samples of the coma of comet Wild-2 and return those samples to the Earth for analysis. Mission design and operational navigation for Stardust is performed by the Jet Propulsion Laboratory (JPL). This paper will describe the extensive JPL effort in support of the Stardust pre-launch analysis of the orbit determination component of the mission covariance study. A description of the mission and it's trajectory will be provided first, followed by a discussion of the covariance procedure and models. Predicted accuracy's will be examined as they relate to navigation delivery requirements for specific critical events during the mission. Stardust was launched into a heliocentric trajectory in early 1999. It will perform an Earth Gravity Assist (EGA) on January 15, 2001 to acquire an orbit for the eventual rendezvous with comet Wild-2. The spacecraft will fly through the coma (atmosphere) on the dayside of Wild-2 on January 2, 2004. At that time samples will be obtained using an aerogel collector. After the comet encounter Stardust will return to Earth when the Sample Return Capsule (SRC) will separate and land at the Utah Test Site (UTTR) on January 15, 2006. The spacecraft will however be deflected off into a heliocentric orbit. The mission is divided into three phases for the covariance analysis. They are 1) Launch to EGA, 2) EGA to Wild-2 encounter and 3) Wild-2 encounter to Earth reentry. Orbit determination assumptions for each phase are provided. These include estimated and consider parameters and their associated a-priori uncertainties. Major perturbations to the trajectory include 19 deterministic and statistical maneuvers planned for the mission. The spacecraft is three axis stabilized and has unbalanced thrusters for attitude control. Accelerations due to the attitude control system are treated stochastically. The tracking scenario for the study is patterned after the actual schedule employed during the different phases of the mission. Conventional X-band two-way Doppler and SRA range data was simulated and the standard accuracy for these data types was assumed throughout most of the mission. However, a deweighting scheme was used for the Doppler data during times of low Sun-Earth-Probe angles, especially in the case of the DSM. Optical data is assumed to be available starting at 50 days prior to the comet encounter. The optical data will be used to improve the ephemeris of Wild-2, which is considered crucial to properly target the comet flyby. Results of the covariance analysis are presented for all mission phases. Navigation capability will be discussed in terms of the uncertainty in the encounter B-Plane (B.R and B.T) and linearized time of flight. Delivery errors based on the final maneuver prior to the comet encounter will be presented. The most stringent navigation requirement is for the Earth reentry. The uncertainty in the flight path angle must be less than 0.02 degree (orbit determination and maneuver performance) to assure successful recovery of the SRC. Results presented show that this requirement can be met.

Menon, Premkumar R.↗

NASA NTRS1985

Error analyses for the delivery of a spinning probe to Jupiter

The task of delivering the Galileo Probe to specified atmospheric entry conditions at Jupiter is especially challenging because tracking, trajectory corrections, and attitude adjustments are not possible after release of the Probe from the carrier vehicle. Statistical analysis of the spacecraft dynamics mapped into Probe dispersions in atmosphere-relative and relay-geometry parameters show that attitude stability, heating, and relay performance requirements can be satisfied. Reconstruction techniques are used to enhance estimates of the delivery parameters to permit correct interpretation of the scientific data for the Jovian atmosphere. A tradeoff which sacrifices some delivery accuracy and propellant is shown to guarantee satisfaction of a very tight reconstruction requirement for the trajectory considered in this report.

Hintz, G. R.↗

NASA NTRS2000

A Collaborative Analysis Tool for Integrated Hypersonic Aerodynamics, Thermal Protection Systems, and RBCC Engine Performance for Single Stage to Orbit Vehicles

Presented is a computer-based tool that connects several disciplines that are needed in the complex and integrated design of high performance reusable single stage to orbit (SSTO) vehicles. Every system is linked to every other system, as is the case of SSTO vehicles with air breathing propulsion, which is currently being studied by NASA. An RBCC propulsion system integrates airbreathing and rocket propulsion into a single engine assembly enclosed within a cowl or duct. A typical RBCC propulsion system operates as a ducted rocket up to approximately Mach 3. Then there is a transition to a ramjet mode for supersonic-to-hypersonic acceleration. Around Mach 8 the engine transitions to a scramjet mode. During the ramjet and scramjet modes, the integral rockets operate as fuel injectors. Around Mach 10-12 (the actual value depends on vehicle and mission requirements), the inlet is physically closed and the engine transitions to an integral rocket mode for orbit insertion. A common feature of RBCC propelled vehicles is the high degree of integration between the propulsion system and airframe. At high speeds the vehicle forebody is fundamentally part of the engine inlet, providing a compression surface for air flowing into the engine. The compressed air is mixed with fuel and burned. The combusted mixture must be expanded to an area larger than the incoming stream to provide thrust. Since a conventional nozzle would be too large, the entire lower after body of the vehicle is used as an expansion surface. Because of the high external temperatures seen during atmospheric flight, the design of an airbreathing SSTO vehicle requires delicate tradeoffs between engine design, vehicle shape, and thermal protection system (TPS) sizing in order to produce an optimum system in terms of weight (and cost) and maximum performance. To adequately determine the performance of the engine/vehicle, the Hypersonic Flight Inlet Model (HYFIM) module was designed to interface with the RBCC engine model. HYFIM performs the aerodynamic analysis of forebodies and inlet characteristics of RBCC powered SSTO launch vehicles. HYFIM is applicable to the analysis of the ramjet/scramjet engine operations modes (Mach 3-12), and provides estimates of parameters such as air capture area, shock-on-lip Mach number, design Mach number, compression ratio, etc., based on a basic geometry routine for modeling axisymmetric cones, 2-D wedge geometries. HYFIM also estimates the variation of shock layer properties normal to the forebody surface. The thermal protection system (TPS) is directly linked to determination of the vehicle moldline and the shaping of the trajectory. Thermal protection systems to maintain the structural integrity of the vehicle must be able to mitigate the heat transfer to the structure and be lightweight. Herein lies the interdependency, in that as the vehicle's speed increases, the TPS requirements are increased. And as TPS masses increase the effect on the propulsion system and all other systems is compounded. The need to analyze vehicle forebody and engine inlet is critical to be able to design the RBCC vehicle. To adequately determine insulation masses for an RBCC vehicle, the hypersonic aerodynamic environment and aeroheating loads must be calculated and the TPS thicknesses must be calculated for the entire vehicle. To accomplish this an ascent or reentry trajectory is obtained using the computer code Program to Optimize Simulated Trajectories (POST). The trajectory is then used to calculate the convective heat rates on several locations on the vehicles using the Miniature Version of the JA70 Aerodynamic Heating Computer Program (MINIVER). Once the heat rates are defined for each body point on the vehicle, then insulation thicknesses that are required to maintain the vehicle within structural limits are calculated using Systems Improved Numerical Differencing Analyzer (SINDA) models. If the TPS masses are too heavy for the performance of the vehicle the process may be repeated altering the trajectory or some other input to reduce the TPS mass. E-PSURBCC is an "engine performance" model and requires the specification of inlet air static temperature and pressure as well as Mach number (which it pulls from the HYFIM and POST trajectory files), and calculates the corresponding stagnation properties. The engine air flow path geometry includes inlet, a constant area section where the rocket is positioned, a subsonic diffuser, a constant area afterburner, and either a converging nozzle or a converging-diverging nozzle. The current capabilities of E-PSURBCC ejector and ramjet mode treatment indicated that various complex flow phenomena including multiple choking and internal shocks can occur for combinations of geometry/flow conditions. For a given input deck defining geometry/flow conditions, the program first goes through a series of checks to establish whether the input parameters are sound in terms of a solution path. If the vehicle/engine performance fails mission goals, the engineer is able to collaboratively alter the vehicle moldline to change aerodynamics, or trajectory, or some other input to achieve orbit. The problem described is an example of the need for collaborative design and analysis. RECIPE is a cross-platform application capable of hosting a number of engineers and designers across the Internet for distributed and collaborative engineering environments. Such integrated system design environments allow for collaborative team design analysis for performing individual or reduced team studies. To facilitate the larger number of potential runs that may need to be made, RECIPE connects the computer codes that calculate the trajectory data, aerodynamic data based on vehicle geometry, heat rate data, TPS masses, and vehicle and engine performance, so that the output from each tool is easily transferred to the model input files that need it.

Stanley, Thomas Troy↗

NASA NTRS1977

Development of an integrated configuration management/flight director system for piloted STOL approaches

A system analysis method for the development of an integrated configuration management/flight director system for IFR STOL approaches is presented. Curved descending decelerating approach trajectories are considered. Considerable emphasis is placed on satisfying the pilot centered requirements (acceptable workload) as well as the usual guidance and control requirements (acceptable performance). The Augmentor Wing Jet STOL Research Aircraft was utilized to allow illustration by example, and to validate the analysis procedure via manned simulation.

Hoh, R. H.↗

NASA NTRS1981

Stability analysis of automobile driver steering control

In steering an automobile, the driver must basically control the direction of the car's trajectory (heading angle) and the lateral deviation of the car relative to a delineated pathway. A previously published linear control model of driver steering behavior which is analyzed from a stability point of view is considered. A simple approximate expression for a stability parameter, phase margin, is derived in terms of various driver and vehicle control parameters, and boundaries for stability are discussed. A field test study is reviewed that includes the measurement of driver steering control parameters. Phase margins derived for a range of vehicle characteristics are found to be generally consistent with known adaptive properties of the human operator. The implications of these results are discussed in terms of driver adaptive behavior.

Allen, R. W.↗

NASA NTRS1985

Radiative viscous-shock-layer analysis of Fire, Apollo, and PAET flight data

Equilibrium, radiating viscous-shock-layer solutions are obtained for a number of trajectory points of the Fire II, Apollo 4, and PAET experimental flight vehicles. Convective heating rates calculated by a benchmark code agree well, except at high altitudes corresponding to low densities, with two engineering correlations. Calculated radiation intensities are compared with the flight radiometer data and with inviscid flow results. Differences as great as 70 percent are observed between measured data and the viscous calculations. Viscous effects reduce the intensity toward the wall, because of boundary-layer absorption, by as much as 30 percent, compared with inviscid intensities. Preliminary chemical and thermal nonequilibrium flow calculations along a stagnation streamline for a PAET trajectory predict enhancement of radiation owing to chemical relaxation. Stagnation point solutions are also presented for future air-assisted orbital transfer vehicle geometries with nose radii ranging from 0.3 to 15 m.

Balakrishnan, A.↗

NASA NTRS1992

Evaluation of some significant issues affecting trajectory and control management for air-breathing hypersonic vehicles

Horizontal takeoff airbreathing-propulsion launch vehicles require near-optimal guidance and control which takes into account performance sensitivities to atmospheric characteristics while satisfying physically-derived operational constraints. A generic trajectory/control analysis tool that deepens insight into these considerations has been applied to two versions of a winged-cone vehicle model. Information that is critical to the design and trajectory of these vehicles is derived, and several unusual characteristics of the airbreathing propulsion model are shown to have potentially substantial effects on vehicle dynamics.

Hattis, Philip D.↗

NASA NTRS2017

Trajectory Design for a Single-String Impactor Concept

This paper introduces a trajectory design for a secondary spacecraft concept to augment science return in interplanetary missions. The concept consist of a single-string probe with a kinetic impactor on board that generates an artificial plume to perform in-situ sampling. The trajectory design was applied to a particular case study that samples ejecta particles from the Jovian moon Europa. Results were validated using statistical analysis. Details regarding the navigation, targeting and disposal challenges related to this concept are presented herein.

Monte Carlo↗

DOE OSTI2021

Fuel Property Effects on Knock Propensity and Thermal Efficiency in a Direct-Injection Spark-Ignition Engine

Engine knock remains one of the major barriers to further improvement in thermal efficiency of Direct-Injection Spark-Ignition (DISI) engines. While Research Octane Number and Motor Octane Number are often used as standard rating methods for knock resistance of fuels, the impacts of other fuel properties on knock propensity in modern engines such as heat of vaporization (HoV) and laminar flame speed (LFS) require better understanding in order to co-optimize fuels and engine designs to achieve higher thermal efficiency and lower CO2 emission. In the present study, computational fluid dynamics (CFD) is used to model a boosted DISI engine with a focus on knock prediction and fuel property effects. A level-set G-equation model is employed to capture turbulent premixed combustion, and is coupled with a transported Livengood-Wu (L-W) integral approach to predict autoignition in the unburnt region. A criterion associated with the L-W integral is developed to accurately predict knock onset and knock-limited spark-advance. This model is then applied to a sensitivity analysis of HoV and LFS on knock tendency and thermal efficiency. The pressure-temperature trajectory framework is applied and extended to study the fuel effects on auto-ignition process in the engine. An existing efficiency-based merit function, which is derived from experiments for boosted SI engines, is evaluated and improved based on the current CFD results.

DISI↗

DOE OSTI2019

Direct Visualization of Counter-Propagating Surface Plasmons in Real Space-Time

We deploy two-dimensional nano-hole arrays as resonant surface plasmon polariton (SPP) couplers that enable counter-propagation and interference-free imaging of SPP wave-packets. We monitor the spatiotemporal evolution of the resulting SPPs using two-color photoemission electron microscopy (PEEM). The measurements track the electric field envelope of the SPP in real space and time and enable direct characterization of their spatiotemporal properties in a regime where the SPP wave-packet is the principle observable. We provide an analysis of the observables for both the co- and counter-propagating directions via SPP trajectories that are recorded in tandem. Our results highlight the advantages of isolating SPPs through counter-propagation, where field-SPP interactions are suppressed.

Crampton, Kevin T.↗

DOE OSTI2021

Radiation exposure induces cross-species temporal metabolic changes that are mitigated in mice by amifostine

Exposure to acute, damaging radiation may occur through a variety of events from cancer therapy and industrial accidents to terrorist attacks and military actions. Our understanding of how to protect individuals and mitigate the effects of radiation injury or Acute Radiation Syndrome (ARS) is still limited. There are only a few Food and Drug Administration-approved therapies for ARS; whereas, amifostine is limited to treating low dose (0.7–6 Gy) radiation poisoning arising from cancer radiotherapy. An early intervention is critical to treat ARS, which necessitates identifying diagnostic biomarkers to quickly characterize radiation exposure. Towards this end, a multiplatform metabolomics study was performed to comprehensively characterize the temporal changes in metabolite levels from mice and non-human primate serum samples following γ-irradiation. The metabolomic signature of amifostine was also evaluated in mice as a model for radioprotection. The NMR and mass spectrometry metabolomics analysis identified 23 dysregulated pathways resulting from the radiation exposure. These metabolomic alterations exhibited distinct trajectories within glucose metabolism, phospholipid biosynthesis, and nucleotide metabolism. A return to baseline levels with amifostine treatment occurred for these pathways within a week of radiation exposure. Together, our data suggests a unique physiological change that is independent of radiation dose or species. Furthermore, a metabolic signature of radioprotection was observed through the use of amifostine prophylaxis of ARS.

59 BASIC BIOLOGICAL SCIENCES↗