Search NASA⌕ Search

SEARCH · Search NASA

Results for “VAPOR PHASE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,639 records · Page 91

The Gas-Phase Synthesis of a New Functional Hybrid Material on the Basis of Multiwalled Carbon Nanotubes Decorated with Faceted Aluminum Nanocrystals

The deposition of polyhedral aluminum nanocrystals onto the surface of multiwalled carbon nanotubes (MWCNTs) via metalorganic chemical vapor deposition with the use of triisobutylaluminum as the precursor has been performed for the first time. The new hybrid nanomaterial (Al/MWCNTs) has been characterized by X-ray phase analysis, scanning electron microscopy, and high-resolution transmission electron microscopy. The obtained Al/MWCNTs hybrid materials were tested as the filler for the creation of threedimensional composites on the basis of an AMg2 alloy via powder metallurgy. It has been shown that the use of Al/MWCNTs as the filler increases the hardness of the composites by 18% in comparison with the initial MWCNTs.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Following heterogeneous nucleation of CO 2 on H 2 O ice nanoparticles with microsecond resolution

Heterogeneous nucleation of CO 2 onto H 2 O ice particles may play an important role in proposed innovative CO 2 capture technologies, as well as in the formation of Martian clouds. In this work we follow the nucleation/condensation of CO 2 /H 2 O gas mixtures with microsecond resolution in supersonic Laval nozzles using pressure trace measurement (PTM) and small angle X-ray scattering (SAXS). The latent heat release detected by the PTM reveals that the first phase transition in the expanding CO 2 /H 2 O mixture is the formation of H 2 O ice particles by the homogeneous nucleation/condensation and freezing of H 2 O. This is followed by the heterogeneous nucleation and growth of CO 2 on the H 2 O ice particles. The onset conditions for heterogeneous nucleation, i.e. the partial pressure of CO 2 and temperature from PTM and the radius of gyration of the H 2 O ice particles from SAXS, were determined in the temperature range 124 to 146 K and for particles with radii of gyration in the range of 2.1 to 4.3 nm. The onset conditions suggest that the heterogeneous nucleation of CO 2 may start from the supercooled liquid phase under our conditions. Downstream of the onset point, the partial pressure of CO 2 and temperature rapidly approach the vapor–solid equilibrium line of CO 2 , showing that even if CO 2 condensation is initiated by heterogeneous nucleation of the liquid phase, it proceeds via growth of the solid.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Computational study of the role of gas-phase oxidation in CW laser ablation of Al target in an external supersonic air flow

Vapor expansion from Al target irradiated by a continuous wave laser into a supersonic external air flow is investigated in kinetic simulations performed for values of pressure in the external flow ranging from 50 Pa to 10000 Pa. The direct simulation Monte Carlo method enhanced with a simplified description of Al vapor burning in air is used in the simulations. The results of the simulations reveal a significant effect of the external gas pressure on the flow structures and the mechanisms of the alumina and oxygen transport to the target surface. At small values of pressure, the transport of both alumina and oxygen is controlled by diffusion and the formation of alumina film on the surface of the laser spot is dominated by the direct sedimentation of alumina from the gas flow. In this regime, the flux of oxygen to the laser spot is by an order of magnitude smaller than that of alumina. At higher values of pressure, the diffusion cannot directly deliver oxygen and alumina to the surface of the laser spot, but the circulating flow generated upstream the spot can effectively trap alumina formed in the flame zone and deposit it to the target surface. In this regime, the likely mechanism of the alumina film formation within the spot is the heterogeneous oxidation and growth of the film from the upstream edge of the spot in the downstream direction.

Materials Science↗

High-speed imaging of transition from fluid breakup to phase explosion in electric explosion of tungsten wires in air

High-speed visible imaging of sub-microsecond electric explosion of wires at the low specific energy deposition threshold reveals three distinct modes of wire failure as capacitor charge voltage and energy deposition are increased. For 100 micron diameter gold-plated tungsten wires of 2 cm length, deposited energies of 1.9 eV/atom produces a liquid column that undergoes hydrodynamic breakup into droplets with radii of order of wire diameter on timescales of 200 μs. Instability growth, column breakup, and droplet coalescence follow classic Rayleigh-Plateau predictions for instability of viscous fluid column. Above 3.2 eV/atom of deposited energy, wires are seen to abruptly transition to an expanding mixture of micron scale liquid-droplets and vapor within one frame (less than 3.33 μs), which has been termed ‘phase explosion’ in literature. Between these two limits, at 2.5 eV/atom of deposited energy, wire radius is unchanged for the first 10 μs before the onset of a rapid expansion and disintegration that resembles homogenous nucleation of mechanically unstable bubbles. Here, thermodynamic calculations are presented that separate cases by temperature obtained during heating: below boiling point, near boiling point, and exceeding boiling point.

42 ENGINEERING↗

Nanocrystalline sp{sup 2} and sp{sup 3} carbons: CVD synthesis and applications

The design and production of innovative materials based on nanocrystalline sp{sup 2}- and sp{sup 3}-coordinated carbons is presently a focus of the scientific community. We present a review of the nanostructures obtained in our labs using a series of synthetic routes, which make use of chemical vapor deposition (CVD) techniques for the selective production of non-planar graphitic nanostructures, nanocrystalline diamonds, and hybrid two-phase nanostructures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural phase transition and erasable optically memorized effect in layered γ-In{sub 2}Se{sub 3} crystals

We have grown In{sub 2}Se{sub 3} layered-type crystals using chemical vapor transport method with ICl{sub 3} as the transport agent. The as-grown crystals show two different color groups of black shiny for α-phase In{sub 2}Se{sub 3} and red to yellow for γ-phase In{sub 2}Se{sub 3}. High-resolution transmission electron micro scopy verifies crystalline state and structural polytype of the as-grown In{sub 2}Se{sub 3}. The results indicate that the α-In{sub 2}Se{sub 3} crystals present more crystalline states than those of the other amorphous γ-In{sub 2}Se{sub 3}. The amorphous effect on the advancing of optoelectronic property of γ-In{sub 2}Se{sub 3} shows erasable optical-memorized effect in the disordered and polycrystalline γ-In{sub 2}Se{sub 3} layers. Laser-induced photodarkening and annealed-recovery test verified that a reversible structural-phase transition of γ↔α can occur inside the γ-In{sub 2}Se{sub 3}. Thermoreflectance and Raman scattering measurements are carried out to identify the inter-phase transformation of the γ-In{sub 2}Se{sub 3} polycrystals using different heat treatments. Direct band gaps and Raman vibration modes for the γ- and α-In{sub 2}Se{sub 3} crystalline phases are, respectively, characterized and identified. The character of γ↔α inter-phase transition promotes feasible optical and optoelectronic applications of the γ-In{sub 2}Se{sub 3} material in optical memory, optics, and solar-energy devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Phase Stability in Nanocrystals: A Predictive Diagram for Yttria–Zirconia

Predicting the polymorphic stability of nanocrystals entails taking into account the thermodynamic effects from solid–vapor interfaces. With recent advances in microcalorimetry, it is finally possible to obtain reliable surface energy data which allow building of predictive diagrams, such as the usual phase diagrams for bulk crystals, for nanocrystals. Yttria doped zirconia (YZ) is currently utilized in a variety of applications; making it one of the most studied oxide systems to date. However, the polymorphism of nanocrystalline YZ (nYZ) is much less understood as compared to its bulk counterpart, and the stability conditions of cubic, tetragonal, monoclinic, and amorphous polymorphs at the nanoscale is so far only empirically defined. In this work, we present a new predictive nanoscale phase diagram for nYZ using unprecedented data on surface energies and bulk enthalpies acquired by microcalorimetry. The phase diagram shows the stable zirconia polymorph as a function of the composition and size. This is a useful tool and an important and novel advancement to relatively untouched bulk phase diagrams, which holds the key for reliable materials' design.

Drazin, John W.↗

Two-phase flow characteristics across sudden contraction in small rectangular channels

This study examines the two-phase flow pattern change and pressure drop at the sudden contraction from small rectangular channels (3 x 9 mm and 3 x 6 mm) into a 3 mm diameter tube. A unique deflection of contraction pressure drop vs. vapor quality is observed at a very low quality regime with an unusual ''liquid like vena contracta''. The measured pressure drops are compared with existing correlations/models, but none of them can accurately predict the available database. By proposing a correction factor accounting for the influence of surface tension (Bond number and contraction ratio) to the original homogeneous model, considerable improvement of the predictive ability of homogeneous model is arrived. The mean deviation of this correlation is 26.18% applicable to the present data (80 points) and available literatures (357 points). (author)

42 ENGINEERING↗

An instrument for in situ time-resolved X-ray imaging and diffraction of laser powder bed fusion additive manufacturing processes

In situ X-ray-based measurements of the laser powder bed fusion (LPBF) additive manufacturing process produce unique data for model validation and improved process understanding. Synchrotron X-ray imaging and diffraction provide high resolution, bulk sensitive information with sufficient sampling rates to probe melt pool dynamics as well as phase and microstructure evolution. Here, we describe a laboratory-scale LPBF test bed designed to accommodate diffraction and imaging experiments at a synchrotron X-ray source during LPBF operation. We also present experimental results using Ti-6Al-4V, a widely used aerospace alloy, as a model system. Both imaging and diffraction experiments were carried out at the Stanford Synchrotron Radiation Lightsource. Melt pool dynamics were imaged at frame rates up to 4 kHz with a ~1.1 μm effective pixel size and revealed the formation of keyhole pores along the melt track due to vapor recoil forces. Diffraction experiments at sampling rates of 1 kHz captured phase evolution and lattice contraction during the rapid cooling present in LPBF within a ~50 × 100 μm area. In conclusion, we also discuss the utility of these measurements for model validation and process improvement.

36 MATERIALS SCIENCE↗

Global and local planarization of surface roughness by chemical vapor deposition of organosilicon polymer for barrier applications

Particulates and asperities on the surface of plastic substrates limit the performance of the current protective barrier coatings for flexible electronics. By applying a smoothing layer to the substrate, prior to barrier deposition, permeation is reduced. While application of smoothing layers from the liquid-phase application and curing of acrylate monomers is well known, reports of planarization achieved by vapor deposition are quite limited. In the current work, the chemical vapor deposition (CVD) of a flexible smoothing layer, requiring no curing, is implemented in the same reactor chamber and from the same organosilicon monomer used for depositing the multilayer barrier stack. The process similarity between the smoothing and barrier layer deposition steps has the potential to lower the overall cost of the process and to improve interfacial properties, such as adhesion between the smoothing layer and the barrier stack. The current methods adapts and combines features of two well established methods for CVD of organic layers, plasma enhancement (PECVD) and the specific use of an initiator species (iCVD). The novel, initiated plasma enhanced chemical vapor deposition (iPECVD) method achieves a far greater degree of planarization of flexible organic layer than either of its predecessors. Polystyrene microspheres serve as model defects and allow the degree of planarization to be quantitatively measured. Both cross-sectional scanning electron micrographs and atomic force micrographs demonstrate that when the iPECVD organic layer is 1.8 {mu}m thick, the degree of global planarization is 99%. A model demonstrates that the planarization is achieved as a result of the coating viscosity and the surface tension. Finally, the water vapor barrier performance of a 20-nm-thick SiO{sub x} layer is two orders of magnitude improved when it is deposited on a planarized substrate.

36 MATERIALS SCIENCE↗

Synthesis of Gadolinium Scandate from a Hydroxide Hydrogel

In this paper, gadolinium scandate (GdScO 3 ) has been synthesized at 300 °C through the decomposition of a mixed cation hydroxide hydrogel in a humid environment. Increasing the reaction temperature produced larger particles that better adopted the Wulff shape. A lack of water vapor during the synthesis caused the solid network of the hydrogel to collapse upon heating so an amorphous xerogel was produced. Water vapor in the system imbibed the hydrogel and allowed for greater diffusion of the atomic species to allow for crystallization into the perovskite phase at temperatures lower than typical sol–gel processes. Finally, temperatures less than 300 °C, or an excess of water vapor, promoted the formation of Gd(OH) 3 and ScOOH in addition to or in lieu of GdScO 3 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Rapid microwaves synthesis of CoSi{sub x}/CNTs as novel catalytic materials for hydrogenation of phthalic anhydride

CoSi{sub x}/CNTs catalysts with different CoSi{sub x} phases (CoSi, CoSi{sub 2}) have been rapidly synthesized via a microwave-assisted route and applied for the liquid phase hydrogenation of phthalic anhydride. The synthesized catalysts were analyzed and characterized by X-ray diffraction, X-ray photoelectron spectroscopy, transmission electron microscopy-energy dispersive X-ray spectroscopy, thermogravimetric/derivative thermogravimetric analysis. The reaction progress of cobalt silicides and the ratio of Co:Si were monitored at different microwave irradiation times by XRD, giving insight into the formation mechanism. Compared to the Co/CNTs catalyst, all the prepared CoSi{sub x}/CNTs catalysts exhibited excellent activity and good selectivity to phthalide under mild reaction conditions (180–220 °C and 4.0 MPa H{sub 2}). This novel methodology can be applied to the synthesis of other transition metal silicides such as FeSi, Ni{sub 2}Si, and Cu{sub 4}Si. - Graphical abstract: CoSi{sub x}/CNTs catalysts with different CoSi{sub x} phases (CoSi{sub 2}, CoSi) have been rapidly synthesized via microwave-assisted route, which involves the vaporization of CoCl{sub 2} and subsequent reaction of CoCl{sub 2} with Si. - Highlights: • CoSi{sub x}/CNTs catalysts have been rapid synthesized via microwave-assisted route. • The phases of CoSi{sub x} were controlled by varying microwave time and Co:Si ratio. • FeSi, Ni{sub 2}Si and Cu{sub 4}Si were also synthesized via microwave-assisted route. • CoSi{sub x}/CNTs catalysts can be applied in hydrogenation of phthalic anhydride.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Atmospheric-Pressure Chemical Vapor Deposition of Iron Pyrite Thin Films

Iron pyrite (cubic FeS{sub 2}) is a promising candidate absorber material for earth-abundant thin-film solar cells. In this report, single-phase, large-grain, and uniform polycrystalline pyrite thin films are fabricated on glass and molybdenum-coated glass substrates by atmospheric-pressure chemical vapor deposition (AP-CVD) using the reaction of iron(III) acetylacetonate and tert-butyl disulfide in argon at 300 C, followed by sulfur annealing at 500--550 C to convert marcasite impurities to pyrite. The pyrite-marcasite phase composition depends strongly on the concentration of sodium in the growth substrate and the sulfur partial pressure during annealing. Phase and elemental composition of the films are characterized by X-ray diffraction, Raman spectroscopy, Auger electron spectroscopy, secondary ion mass spectrometry, Rutherford backscattering spectrometry, and X-ray photoelectron spectroscopy. The in-plane electrical properties are surprisingly insensitive to phase and elemental impurities, with all films showing p-type, thermally activated transport with a small activation energy ({approx}30 meV), a room- temperature resistivity of {approx}1 {Omega} cm, and low mobility. These ubiquitous electrical properties may result from robust surface effects. These CVD pyrite thin films are well suited to fundamental electrical studies and the fabrication of pyrite photovoltaic device stacks.

14 SOLAR ENERGY↗

THE POTENTIAL OF NANOPARTICLE ENHANCED IONIC LIQUIDS (NEILS) AS ADVANCED HEAT TRANSFER FLUIDS

Interest in capturing the energy of the sun is rising as demands for renewable energy sources increase. One area of developing research is the use of concentrating solar power (CSP), where the solar energy is concentrated by using mirrors to direct the sunlight towards a collector filled with a heat transfer fluid (HTF). The HTF transfers the collected energy into pressurized steam, which is used to generate energy. The greater the energy collected by the HTF, the more efficent the electrical energy production is, thus the overall efficiency is controlled by the thermal fluid. Commercial HTFs such as Therminol{reg_sign} (VP-1), which is a blend of biphenyl and diphenyl oxide, have a significant vapor pressure, especially at elevated temperatures. In order for these volatile compounds to be used in CSP systems, the system either has to be engineered to prevent the phase change (i.e., volatilization and condensation) through pressurization of the system, or operate across the phase change. Over thirty years ago, a class of low-melting organic compounds were developed with negligible vapor pressure. These compounds are referred to as ionic liquids (ILs), which are organic-based compounds with discrete charges that cause a significant decrease in their vapor pressure. As a class, ILs are molten salts with a melting point below 100 C and can have a liquidus range approaching 400 C, and in several cases freezing points being below 0 C. Due to the lack of an appreciable vapor pressure, volatilization of an IL is not possible at atmospheric pressure, which would lead to a simplification of the design if used as a thermal fluid and for energy storage materials. Though the lack of a vapor pressure does not make the use of ILs a better HTF, the lack of a vapor pressure is a compliment to their higher heat capacity, higher volummetric density, and thus higher volumetric heat capacity. These favorable physical properties give ILs a pontential advantage over the current commerically used thermal fluids. Also within the past decade nanofluids have gained attention for thermal conductivity enhancment of fluids, but little analysis has been completed on the heat capacity effects of the nanoparticle addition. The idea of ILs or nanofluids as a HTF is not new, as there are several references that have proposed the idea. However, the use of ionic liquid nanofluids containing nanomaterials other than carbon nanotubes has never before been studied. Here, for the first time, nano-particle enhanced ILs (NEILs) have been shown to increase the heat capacity of the IL with no adverse side effects to the ILs thermal stability and, only at high nanoparticle loading, are the IL physical properties affected. An increase of volumetric heat capacity translates into a better heat transfer fluid as more energy is stored per volumetric unit in the solar concentrating section, thus more efficency in increased steam pressure. Results show that the properties of the NEIL are highly dependant on the suspended nanomaterial and careful materials selection is required to fully optimize the nanofluid properties.

14 SOLAR ENERGY↗

Use of a GPS-Derived Troposphere Model to Improve InSAR Deformation Estimates in the San Gabriel Valley, California

We evaluate the potential of troposphere models derived from ground meteorological data (pressure, temperature, and relative humidity) and Global Positioning System (GPS) data to improve InSAR measurements and models derived from them. We test this approach on an ERS-2/Envisat data set collected during a transient surface deformation episode that occurred from January to July 2005 in the San Gabriel Valley, southern California, USA. We find that the interferometric phase change observed over the corresponding period cannot be solely attributed to hydrological uplift associated with rising groundwater levels but also includes a significant contribution from differential tropospheric delay due to differing quantities of water vapor in the troposphere on the two SAR observation dates. We show that, if the tropospheric phase contribution is mistakenly interpreted as the range change associated with changes in groundwater storage, both the surface displacement and the groundwater storage coefficient may be overestimated by up to 30%. Finally, this method could be applied in real time where meteorological measurements are available near one or more GPS permanent site(s).

54 ENVIRONMENTAL SCIENCES↗

Conformational diversity of 1-phenylpiperidin-4-one in the gas phase

Conformational preferences of substituted, saturated cyclic ketones may deviate from those of their parent analogues. 1-Phenylpiperidin-4-one was found to exist in several forms differing by not only position (axial or equatorial) of the aryl-substituent but also by a configuration of the piperidine cycle itself: chair-Eq, chair-Ax and twist-Tw. Here, the ratios of the co-existing species contributions in gas phase predicted by various quantum chemical calculations were confirmed by synchronous gas-phase electron diffraction and mass spectrometric experiments carried out for the vapor at 337 K demonstrating a best fit with the B3LYP-D3/cc-pVTZ combination: Eq:Ax:Tw=55(13):22(9):23(10) vs. 40:35:25.

1-phenylpiperidin-4-one↗

A remarkable CHF of 345W/cm 2 is achieved in a wicked-microchannel using HFE-7100

Boiling heat transfer of dielectric fluids is a promising cooling technique for thermal management of microelectronic systems. However, the critical heat flux achievable is generally low, because of the poor thermophysical properties of these fluids. Here, to address this dilemma, we propose a new cooling concept to substantially enhance global liquid supply during phase-change process using enhanced capillary-driven force. Additionally, dedicated vapor pathways are designed among a bank of micro-pillars to facilitate vapor removal. In this work, new wicks comprised of silicon micro-pinfin arrays are explored to significantly enhance the flow boiling heat transfer performance. To examine the functionalities of this wick, experiments on HFE-7100 were carried out with mass velocities varying from 247 to 3,465 kg/m 2 s. To explore the enhancement mechanisms and to analyze the capillary-assisted flow boiling process, visualization studies were conducted. The results indicate that sustainable evaporation induced by wick microstructures and efficient liquid supply are the enhancement mechanisms compared to parallel microchannels with solid walls. It is found that the overall heat transfer coefficient is substantially increased up to 75%. Remarkably, a high critical heat flux (CHF) of approximately 345 W/cm 2 is recorded at G = 3,465 kg/m 2 s at coolant inlet temperature of ~20 °C. Equally importantly, this noticeable enhancement of CHF value is associated with drastically decreased pressure drops compared to microchannels decorated with μ-pinfin fences.

36 MATERIALS SCIENCE↗

Solution Processed Titanyl Phthalocyanines as Donors in Solar Cells: Photoresponse to 1000 nm

Here, we report a route to thin-film polymorphs of soluble TiOPc derivatives that exhibit similar near-IR absorptivities as vapor deposited thin-films of the parent TiOPc chromophore (phase-I and phase-II polymorphs) and demonstrate that solution-processed planar and bulk heterojunction solar cells fabricated with one of these derivatives exhibited photoactivity throughout the same near-IR wavelength range without compromising VOC. Solution-processed thin-films of soluble octakis(alkylthio)-substituted TiOPc derivatives 1–3 exhibit absorption extending to 1000 nm. When incorporated into OPV devices, the contributions from the lowest CT excitonic state (Q B band) of 1 to device performance were evident in both PHJ and BHJ architectures, indicating sufficient driving force for PIET. This contribution was improved via intimate mixing of donor and acceptor molecules in a BHJ architecture, albeit with a decrease in efficiency. IPCE of the best performing BHJ device showed a contribution from 1 exceeding that of acceptor PCBM, and extending to 1000 nm.

36 MATERIALS SCIENCE↗