Search NASA⌕ Search

SEARCH · Search NASA

Results for “WIND MODELING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,639 records · Page 91

Analysis of the wind tunnel test of a tilt rotor power force model

Two series of wind tunnel tests were made to determine performance, stability and control, and rotor wake interaction on the airframe, using a one-tenth scale powered force model of a tilt rotor aircraft. Testing covered hover (IGE/OCE), helicopter, conversion, and airplane flight configurations. Forces and moments were recorded for the model from predetermined trim attitudes. Control positions were adjusted to trim flight (one-g lift, pitching moment and drag zero) within the uncorrected test data balance accuracy. Pitch and yaw sweeps were made about the trim attitudes with the control held at the trimmed settings to determine the static stability characteristics. Tail on, tail off, rotors on, and rotors off configurations were testes to determine the rotor wake effects on the empennage. Results are presented and discussed.

Marr, R. L.↗

A comparative study of some mathematical models of the mean wind structure and aerodynamic drag of plant canopies

A semianalytical method for describing the mean wind profile and shear stress within plant canopies and for estimating the roughness length and the displacement height is presented. This method incorporates density and vertical structure of the canopy and includes simple parameterizations of the roughness sublayer and shelter factor. Some of the wind profiles examined are consistent with first-order closure techniques while others are consistent with second-order closure techniques. Some profiles show a shearless region near the base of the canopy; however, none displays a secondary maximum there. Comparing several different analytical expressions for the canopy wind profile against observations suggests that one particular type of profile (an Airy function which is associated with the triangular foliage surface area density distribution) is superior to the others. Because of the numerical simplicity of the methods outlined, it is suggested that they may be profitably used in large-scale models of plant-atmosphere exchanges.

Massman, William↗

Pressure Sensitive Paint Applied to Flexible Models Project

One gap in current pressure-measurement technology is a high-spatial-resolution method for accurately measuring pressures on spatially and temporally varying wind-tunnel models such as Inflatable Aerodynamic Decelerators (IADs), parachutes, and sails. Conventional pressure taps only provide sparse measurements at discrete points and are difficult to integrate with the model structure without altering structural properties. Pressure Sensitive Paint (PSP) provides pressure measurements with high spatial resolution, but its use has been limited to rigid or semi-rigid models. Extending the use of PSP from rigid surfaces to flexible surfaces would allow direct, high-spatial-resolution measurements of the unsteady surface pressure distribution. Once developed, this new capability will be combined with existing stereo photogrammetry methods to simultaneously measure the shape of a dynamically deforming model in a wind tunnel. Presented here are the results and methodology for using PSP on flexible surfaces.

model deformation↗

INFRARED STUDY OF FULLERENE PLANETARY NEBULAE

We present a study of 16 planetary nebulae (PNe) where fullerenes have been detected in their Spitzer Space Telescope spectra. This large sample of objects offers a unique opportunity to test conditions of fullerene formation and survival under different metallicity environments because we are analyzing five sources in our own Galaxy, four in the Large Magellanic Cloud (LMC), and seven in the Small Magellanic Cloud (SMC). Among the 16 PNe studied, we present the first detection of C{sub 60} (and possibly also C{sub 70}) fullerenes in the PN M 1-60 as well as of the unusual {approx}6.6, 9.8, and 20 {mu}m features (attributed to possible planar C{sub 24}) in the PN K 3-54. Although selection effects in the original samples of PNe observed with Spitzer may play a potentially significant role in the statistics, we find that the detection rate of fullerenes in C-rich PNe increases with decreasing metallicity ({approx}5% in the Galaxy, {approx}20% in the LMC, and {approx}44% in the SMC) and we interpret this as a possible consequence of the limited dust processing occurring in Magellanic Cloud (MC) PNe. CLOUDY photoionization modeling matches the observed IR fluxes with central stars that display a rather narrow range in effective temperature ({approx}30,000-45,000 K), suggesting a common evolutionary status of the objects and similar fullerene formation conditions. Furthermore, the data suggest that fullerene PNe likely evolve from low-mass progenitors and are usually of low excitation. We do not find a metallicity dependence on the estimated fullerene abundances. The observed C{sub 60} intensity ratios in the Galactic sources confirm our previous finding in the MCs that the fullerene emission is not excited by the UV radiation from the central star. CLOUDY models also show that line- and wind-blanketed model atmospheres can explain many of the observed [Ne III]/[Ne II] ratios using photoionization, suggesting that possibly the UV radiation from the central star, and not shocks, is triggering the decomposition of the circumstellar dust grains. With the data at hand, we suggest that the most likely explanation for the formation of fullerenes and graphene precursors in PNe is that these molecular species are built from the photochemical processing of a carbonaceous compound with a mixture of aromatic and aliphatic structures similar to that of hydrogenated amorphous carbon dust.

79 ASTRONOMY AND ASTROPHYSICS↗

Reducing Wind Tunnel Data Requirements Using Neural Networks

The use of neural networks to minimize the amount of data required to completely define the aerodynamic performance of a wind tunnel model is examined. The accuracy requirements for commercial wind tunnel test data are very severe and are difficult to reproduce using neural networks. For the current work, multiple input, single output networks were trained using a Levenberg-Marquardt algorithm for each of the aerodynamic coefficients. When applied to the aerodynamics of a 55% scale model of a U.S. Air Force/ NASA generic fighter configuration, this scheme provided accurate models of the lift, drag, and pitching-moment coefficients. Using only 50% of the data acquired during, the wind tunnel test, the trained neural network had a predictive accuracy equal to or better than the accuracy of the experimental measurements.

Ross, James C.↗

Dynamic modelling of slip in a wind turbine spherical roller main bearing

This paper considers the problem of the dynamic modelling of macro slip in spherical roller bearings. By revisiting the fundamental physics which drive these systems, potential issues in existing models have been identified. Furthermore, in pure rolling conditions it was found that governing differential equations become "stiff", requiring the use of implicit methods of time integration. The problem of individual roller macro slip in a wind turbine main bearing is then investigated using a simplified representation of system dynamics. Model results indicate clear links between slip/friction and the operational strategy of the wind turbine, as well as significantly higher frictional effects in the downwind main bearing row. Due to modelling simplifications, these results should not yet be considered conclusive, with further work required.

17 WIND ENERGY↗

Stall/spin research status report

Description of a program aimed at improving the design and evaluation techniques relative to stall/spin characteristics of general-aviation aircraft. The program encompasses analytical studies, full-scale and model wind-tunnel tests, a radio-control model, and full-scale flight tests. Initial spin-tunnel results of several tail designs on a representative light aircraft are discussed.

Bowman, J. S., Jr.↗

Atmospheric effects on the Space Shuttle approach and landing

The present work describes piloted simulations of Space Shuttle approach and landing where the pilot either flies the aircraft or monitors a computer-controlled flight with the option to take control. The simulated runs encompassed approach to the airport, acquisition of the glide slope and localizer, and accomplishing final flare and touchdown. The degree of difficulty associated with the flight task was imposed through modeled atmospheric winds and superimposed atmospheric turbulence. The simulator models the Orbiter vehicle with the aid of an all-digital computer complex and a fixed-base crew station. Comparison between piloted and computer-controlled responses to unexpected atmospheric conditions was obtained by recording data from instrument displays available to the pilot.

Ragsdale, W. A.↗

Aeroheating model advancements featuring electroless metallic plating

Discussed are advancements in wind tunnel model construction methods and hypersonic test data demonstrating the methods. The general objective was to develop model fabrication methods for improved heat transfer measuring capability at less model cost. A plated slab model approach was evaluated with cast models containing constantan wires that formed single-wire-to-plate surface thermocouple junctions with a seamless skin of electroless nickel alloy. The surface of a space shuttle orbiter model was selectively plated with scaled tiles to simulate, with high fidelity, the probable misalignments of the heatshield tiles on a flight vehicle. Initial, Mach 8 heating results indicated a minor effect of tile misalignment roughness on boundary layer transition, implying a possible relaxation of heatshield manufacturing tolerances. Some loss of the plated tiles was experienced when the model was tested at high heating rates.

Stalmach, C. J., Jr.↗

On stellar wind accretion in widely separated X-ray binaries, and the nature of 4U0115+63

Widely separated, eccentric pulsating X-ray binaries are shown to be appropriate systems for studying the basic properties of stellar wind accretion. They are free from the complications encountered in closed binaries, where the optical star nearly fills its critical lobe (Avni, 1977). A framework of four observational tests was set up to study the characteristics of wind accretion, and to distinguish between different models of wind acceleration. The tests are applied to the source 4U0115+63, and the accretion process is discussed in both its quiescent states, and during its transient high luminosity outbursts. For the quiescent steady state, two wind profiles, determined from observational data, are compared (Barlow-Lohen, 1977; Castor et al., 1975). The difficulties encountered during the transient high states with respect to the possibility of stellar wind accretion are discussed.

Avni, Y.↗

Three-Dimensional Tracer Model Study of Atmospheric CO2 - Response to Seasonal Exchanges with the Terrestrial Biosphere

A three-dimensional tracer transport model is used to investigate the annual cycle of atmospheric CO2 concentration produced by seasonal exchanges with the terrestrial biosphere. The tracer model uses winds generated by a global general circulation model to advect and convect CO2; no explicit diffusion coefficients are employed. A biospheric exchange function constructed from a map of net primary productivity, and Azevedo's (1982) seasonality of CO2 uptake and release closely simulates the annual cycles at coastal stations. The results show that zonal homogeneity in surface CO2 concentrations can never be achieved at mid-latitudes where the time scale for zonal mixing is longer than the time scale for biospheric exchange. Analysis of the zonal mean balance in the lower troposphere reveals that atmospheric transport processes may alter the CO2 response to local biospheric exchanges by 50% or more. Hence year-to-year variation of the annual CO2 cycle may result from the natural variability of the atmospheric circulation as well as from changes in the sources and sinks.

Fung, I.↗

IUE observations of HL CMa and the winds of cataclysmic variables

As evidenced by the P Cygni profiles of their ultraviolet resonance lines, cataclysmic variables - like early-type stars - are known to have extensive, high velocity winds. Assisted by AAVSO visual data and IUE ultraviolet spectra, an observational and theoretical study of the P Cygni profiles of the dwarf nova HL CMa is presented. As these profiles are dependent upon the ionization structure of the wind, a model of a radiatively-driven shocked wind for cataclysmic variables is described, and results for the temperature and ionization structure of the outflowing gas are presented.

Mauche, C. W.↗

The composite blade structural analyzer (COBSTRAN)

The use and application of the COBSTRAN (COmposite Blade STRuctural ANalyzer) computer code is presented. COBSTRAN was developed at NASA-Lewis and is currently being used for the design and analysis of aircraft engine ducted and unducted fan blades. The features of COBSTRAN are demonstrated for the modeling and analysis of a scaled down wind tunnel model propfan blade made from fiber composites. Comparison of analytical and experimental mode shapes and frequencies are shown, verifying the model development and analysis techniques used. The methodologies and programs developed for this analysis are directly applicable to other propfan blades.

Aiello, Robert A.↗

Experimental study of three shock wave/turbulent boundary layer interactions

The paper presents a systematic study of the supersonic flow of a turbulent boundary layer over several compression-corner models. The wind tunnel and the compression-corner models (ramps fitted with aerodynamic fences to minimize three-dimensional effects) were identical with those used by Settles et al. (1979); constant-temperature hot-wire anemometry was used for the mass-flow measurements. The turning angles used for the compression corners were 8, 16, and 20 deg. In all three flow cases, the shock wave/turbulent flow interaction did amplify the turbulent stresses dramatically, with amplification increasing with increasing turning angle. However, different stress components were amplified by different amounts.

Smits, Alexander J.↗

Aeroelastic analysis of prop fan blades with a semiempirical dynamic stall model

The time-history response of a propfan wind-tunnel model with dynamic stall was studied analytically. The response obtained from the analysis was compared with available experimental data. The governing equations of motion were formulated in terms of blade normal modes calculated using the COSMIC-NASTRAN computer code. The response analysis considered the blade plunging and pitching motions. The lift, drag, and moment coefficients for angles of attack below the static stall angle were obtained from a quasi-steady theory. For angles above static stall angles, a semiempirical dynamic stall model based on a correction to the angle of attack was used to obtain lift, drag, and moment coefficients. Using these coefficients, the aerodynamic forces were calculated at a selected number of strips, and integrated to obtain the total generalized forces. The combined momentum-blade element theory was used to calculate the induced velocity. The semiempirical stall model predicted a limit cycle oscillation near the setting angle at which large vibratory stresses were observed in an experiment. The predicted mode and frequency of oscillation also agreed with those measured in the experiment near this setting angle. The results also correlated well with the other published data that used a semiempirical dynamic stall model based on a synthesized procedure.

Reddy, T. S. R.↗

Theoretical evaluation of engine auxiliary inlet design for supersonic V/STOL aircraft

A higher order panel method is used to evaluate the potential flow of a two dimensional supersonic V/STOL inlet. A non-symmetric analytical inlet model is developed to closely match a wind tunnel model. The analytical inlet is analyzed for flow characteristics around the lower cowl lip and auxiliary inlets. The results are obtained from the output of a computer program that is based on the Hess Panel Method which determines source strengths of panels distributed over a three dimensional body. The analytical model was designed for the implementation of drooped/translated cowl lip and auxiliary inlets as flow improvement concepts. A 40 or 70 degree droop lip can be incorporated on the inlet to determine if these geometry modifications result in flow improvements which may reduce the propensity for flow separation on the interior portion of the lip. Auxiliary inlets are employed to decrease the mass flow over the inlet lip. Thus, the peak flow velocity is reduced at the lip which also lessens the likelihood of flow separation on the interior portion of the lip. A 2, 4, and 6 inch translated lip can be employed to also decrease mass flow over the inlet lower lip in the same manner as the auxiliary inlet. The performance results of the flow improvement concepts show that three possible inlet configurations provide a situation where separation is less likely to occur. A 70 degree droop lip maintains flow conditions such that attached flow over the lower cowl lip may exist for the entire angle of attack range studied. A 0 degree droop and translated lip combination provides similar results for the angle of attack range. The third configuration consists of a 0 degree droop and auxiliary inlet combination. This configuration provides slightly less favorable results than the other two, but still allows for conditions favorable to attached flow within the inlet.

Boles, Michael A.↗

Theoretical evaluation of engine auxiliary inlet design for supersonic V/STOL aircraft

A higher order panel method is used to evaluate the potential flow of a 2-D supersonic V/STOL inlet. A nonsymmetric analytical inlet model is developed to closely match a wind tunnel model tested at NASA-Lewis. The analytical inlet used is analyzed for flow characteristics around the lower cowl lip and auxiliary inlets. The results for this analysis are obtained for the output of a computer program produced by the McDonnell Douglas Corp. This program is based on the Hess Panel Method which determines source strengths of panel distributed over a 3-D body. The analytical model was designed for the implementation of a drooped/translated cowl lip and auxiliary inlets as flow improvement concepts. A 40 or 70 deg droop lip can be incorporated on the inlet to determine if these geometry changes result in flow improvements which may reduce the propensity for flow separation on the interior portion of the lip. Auxiliary inlets are used to decrease the mass flow over the inlet lip; thus, the peak flow velocity is reduced at the lip which also lessens the likelihood of flow separation on the interior portion of the lip. A 2, 4, and 6 in. translated lip can be used to also decrease mass flow over the inlet lower lip in the same manner.

Boles, Michael A.↗