Search NASA⌕ Search

SEARCH · Search NASA

Results for “computer experiment”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,639 records · Page 91

Computer program to minimize prediction error in models from experiments with 16 hypercube points and 0 to 6 center points

A previous report described a backward deletion procedure of model selection that was optimized for minimum prediction error and which used a multiparameter combination of the F - distribution and an order statistics distribution of Cochran's. A computer program is described that applies the previously optimized procedure to real data. The use of the program is illustrated by examples.

Holms, A. G.↗

Computational Study of the CC3 Impeller and Vaneless Diffuser Experiment

Centrifugal compressors are compatible with the low exit corrected flows found in the high pressure compressor of turboshaft engines and may play an increasing role in turbofan engines as engine overall pressure ratios increase. Centrifugal compressor stages are difficult to model accurately with RANS CFD solvers. A computational study of the CC3 centrifugal impeller in its vaneless diffuser configuration was undertaken as part of an effort to understand potential causes of RANS CFD mis-prediction in these types of geometries. Three steady, periodic cases of the impeller and diffuser were modeled using the TURBO Parallel Version 4 code: 1) a k-epsilon turbulence model computation on a 6.8 million point grid using wall functions, 2) a k-epsilon turbulence model computation on a 14 million point grid integrating to the wall, and 3) a k-omega turbulence model computation on the 14 million point grid integrating to the wall. It was found that all three cases compared favorably to data from inlet to impeller trailing edge, but the k-epsilon and k-omega computations had disparate results beyond the trailing edge and into the vaneless diffuser. A large region of reversed flow was observed in the k-epsilon computations which extended from 70% to 100% span at the exit rating plane, whereas the k-omega computation had reversed flow from 95% to 100% span. Compared to experimental data at near-peak-efficiency, the reversed flow region in the k-epsilon case resulted in an under-prediction in adiabatic efficiency of 8.3 points, whereas the k-omega case was 1.2 points lower in efficiency.

Kulkarni, Sameer↗

Computational Study of the CC3 Impeller and Vaneless Diffuser Experiment

Centrifugal compressors are compatible with the low exit corrected flows found in the high pressure compressor of turboshaft engines and may play an increasing role in turbofan engines as engine overall pressure ratios increase. Centrifugal compressor stages are difficult to model accurately with RANS CFD solvers. A computational study of the CC3 centrifugal impeller in its vaneless diffuser configuration was undertaken as part of an effort to understand potential causes of RANS CFD mis-prediction in these types of geometries. Three steady, periodic cases of the impeller and diffuser were modeled using the TURBO Parallel Version 4 code: (1) a k-ε turbulence model computation on a 6.8 million point grid using wall functions, (2) a k-ε turbulence model computation on a 14 million point grid integrating to the wall, and (3) a k-ω turbulence model computation on the 14 million point grid integrating to the wall. It was found that all three cases compared favorably to data from inlet to impeller trailing edge, but the k-ε and k-ω computations had disparate results beyond the trailing edge and into the vaneless diffuser. A large region of reversed flow was observed in the k-ε computations which extended from 70 to 100 percent span at the exit rating plane, whereas the k-ω computation had reversed flow from 95 to 100 percent span. Compared to experimental data at near-peak-efficiency, the reversed flow region in the k-ε case resulted in an underprediction in adiabatic efficiency of 8.3 points, whereas the k-ω case was 1.2 points lower in efficiency.

Kulkarni, Sameer↗

Constraining computational modeling of indirect drive double shell capsule implosions using experiments

Double shell capsule implosions are an alternative approach to achieving alpha heating on the National Ignition Facility. Current machining techniques construct the outer shell as two hemispheres that are glued together, and the deuterium and tritium (DT) liquid inside the inner shell will be injected by a fill tube. These features introduce asymmetries and jetting that may disrupt the confinement of the DT fuel if not carefully controlled. Simulations indicate that in order to achieve high yields in the laboratory, these features as well as susceptibility to the Rayleigh–Taylor instability (RTI) must be mitigated. Furthermore, due to uncertainties in computational models and the expense of using the best physics models at adequate resolution in three dimensions, our computational modeling must be constrained by experiments. We report on the results of recent hydrogrowth radiography and dual-axis keyhole experiments with double shell targets that have been used to evaluate our modeling of the outer shell joint as well as the impacts of high-energy x-ray preheat that strongly impacts RTI growth. Our simulations show good agreement with the experimental data and inform several important modeling choices.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Computational Design and Prototype Evaluation of Aluminide-Strengthened Ferritic Superalloys for Power-Generating Turbine Applications up to 1,033 K

The objective of the proposed research is to utilize modern computational tools, integrated with focused experiments, to design innovative ferritic NiAl-strengthened superalloys for fossil-energy applications at temperatures up to 1,033 K. Specifically, the computational alloy design aims toward (1) a steady-state creep rate of approximately 3 x 10{sup -11} s{sup -1} at a temperature of 1,033 K and a stress level of 35 MPa, (2) a ductility of 10% at room temperature, and (3) good oxidation and corrosion resistance at 1,033 K. The research yielded many outstanding research results, including (1) impurity-diffusion coefficients in {alpha} Fe have been calculated by first principles for a variety of solute species; (2) the precipitates were characterized by the transmission-electron microscopy (TEM) and analytical-electron microscopy (AEM), and the elemental partitioning has been determined; (3) a bending ductility of more than 5% has been achieved in the unrolled materials; and (4) optimal compositions with minimal secondary creep rates at 973 K have been determined. Impurity diffusivities in {alpha} Fe have been calculated within the formalisms of a harmonic transition-state theory and Le Claire nine-frequency model for vacancy-mediated diffusion. Calculated diffusion coefficients for Mo and W impurities are comparable to or larger than that for Fe self-diffusion. Calculated activation energies for Ta and Hf impurities suggest that these solutes should display impurity-diffusion coefficients larger than that for self-diffusion in the body-centered cubic Fe. Preliminary mechanical-property studies identified the alloy Fe-6.5Al-10Ni-10Cr-3.4Mo-0.25Zr-0.005B (FBB-8) in weight percent (wt.%) for detailed investigations. This alloy shows precipitation of NiAl particles with an average diameter of 130 nm. In conjunction with the computational alloy design, selected experiments are performed to investigate the effect of the Al content on the ductility and creep of prototype Fe-Ni-Cr-Al-Mo alloys. Three-point-bending experiments show that alloys containing more than 5 wt.% Al exhibit poor ductility (< 2%) at room temperature, and their fracture mode is predominantly of a cleavage type. Two major factors governing the poor ductility are (1) the volume fraction of NiAl-type precipitates, and (2) the Al content in the {alpha}-Fe matrix. A bend ductility of more than 5% can be achieved by lowering the Al concentration to 3 wt.% in the alloy. The alloy containing about 6.5 wt.% Al is found to have an optimal combination of hardness, ductility, and minimal creep rate at 973 K. A high volume fraction of precipitates is responsible for the good creep resistance by effectively resisting the dislocation motion through Orowan-bowing and dislocation-climb mechanisms. The effects of stress on the creep rate have been studied. With the threshold-stress compensation, the stress exponent is determined to be 4, indicating power-law dislocation creep. The threshold stress is in the range of 40-53 MPa. The addition of W can significantly reduce the secondary creep rates. Compared to other candidates for steam-turbine applications, FBB-8 does not show superior creep resistance at high stresses (> 100 MPa), but exhibit superior creep resistance at low stresses (< 60 MPa).

36 MATERIALS SCIENCE↗

Setting up a STAR Tier 2 Site at Golias/Prague Farm

High Energy Nuclear Physics (HENP) collaborations experience show that the computing resources available at a single site are often neither sufficient nor satisfy the need of remote collaborators eager to carry their analysis in the fastest and most convenient way. From latencies in the network connectivity to the lack of interactivity, work at distant computing centers is often inefficient. Having fully functional software stack on local resources is a strong enabler of science opportunities for any local group who can afford the time investment. The situation becomes more complex as vast amount of data are often needed to perform meaningful analysis. Prague's heavy-ions group participating in STAR experiment at RHIC has been a strong advocate of local computing as the most efficient means of data processing and physics analyses. To create an environment where science can freely thrive, a Tier 2 computing center was set up at a Regional Computing Center for Particle Physics called 'Golias'. It is the biggest farm in the Czech Republic fully dedicated for particle physics experiments. We report on our experience in setting up a fully functional Tier 2 center leveraging the minimal locally available human and financial resources. We discuss the solutions chosen to address storage space and analysis issues and the impact on the farms overall functionality. This includes a locally built STAR analysis framework, integration with a local DPM system (a cost effective storage solution), the influence of the availability and quality of the network connection to Tier 0 via a dedicated CESNET/ESnet link and the development of light-weight yet fully automated data transfer tools allowing the movement of entire datasets from BNL (Tier 0) to Golias (Tier 2). We will summarize the impact of the gained computing performance on the efficiency of the local physics group at offline physics analysis and show the feasibility of such a solution that can used by other groups as well.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Coupled EM-PIC/Radiation Transport Simulations of HERMES Courtyard Experiments

A suite of coupled computational models for simulating the radiation, plasma, and electromagnetic (EM) environment in the High-Energy Radiation Megavolt Electron Source (HERMES) courtyard has been developed. In principle, this provides a predictive forward-simulation capability based solely on measured upstream anode and cathode current waveforms in the Magnetically Insulated Transmission Line (MITL). First, 2D R-Z ElectroMagnetic Particle-in-Cell (EM-PIC) simulations model the MITL and diode to compute a history of all electrons incident on the converter. Next, radiation transport simulations use these electrons as a source to compute the time-dependent dose rate and volumetric electron production in the courtyard. Finally, the radiation transport output is used as sources for EM-PIC simulations of the courtyard to com- pute electromagnetic responses. This suite has been applied to the November 2016 trials, shots 10268-10313. Modeling and experiment differ in significant ways. This is just the first iteration of a long process to improve the agreement, as outlined in the summary.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Collaboration with NSTX in Calculations of Radiofrequency and Neutral Beam Heating and Current Drive

The overall objective of this project was to advance the understanding of heating and current drive necessary for toroidal magnetic confinement fusion energy reactors, and to provide accurate models for these sources to aid in understanding magneto-hydrodynamic, transport and boundary physics issues. Increased understanding is provided by computer simulation using the underlying physics laws, and will lead to greater reliability and increased efficiency of a power producing fusion reactor. The proposed work entailed applications of existing CompX Fokker-Planck, ray tracing, full-wave microwave, and particle diffusion calculator codes to the National Spherical Torus Experiment at Princeton Plasma Physics Laboratory. Special features of NSTX include that large ion orbits are emphasized in its geometry and thus offer a major opportunity within fusion research for focused exploration of their ubiquitous effects, including comparison with simulation codes. The CompX CQL3D Fokker-Planck code was be further adapted to the finite-orbit-width physics. Comparison with experiment ensured that the computer codes have sufficient accuracy to accurately model the experiments. Nonthermal distributions of energetic ions are produced in experiments-- and modeled with the codes-- exhibiting the signatures of auxiliary heating, transport, and radiation processes within the plasma. Using physics-based modeling, in conjunction with experimental data, nonthermal distributions can provide keys to validation and quantification of auxiliary heating physics. Nonthermal distributions also hold particular information on radial transport processes, not obscured by the smoothing Maxwellization effects of Coulomb collisions. Generally, radial transport is not well understood but is a key to efficient fusion energy production. By comparison with Fokker-Planck modeling, the velocity dependence of radial transport coefficients becomes experimentally accessible, particularly in cases of well-modeled sources such as neutral beams, fast wave power, or the toroidal electric field. It is clear from modeling of fast-wave interactions with ions that finite-orbit-width effects play a significant role. For example, a different set of ions is computed to intersect a given cyclotron resonance depending on whether or not radial orbit drifts are taken into account. Also, radial transport, associated bootstrap current, and alpha channeling depend on radial drifts. Ion cyclotron heating above the first harmonic interacts preferentially with higher velocity ions, giving large radial drifts. The CQL3D Fokker-Planck code, maintained by the proposers, is a physics based model used extensively within the US fusion community to compare with and interpret experimental observations. At the beginning of this grant, bounce-averages of the rf quasilinear and other operators have been performed neglecting the radial drifts which give finite orbit widths to the particle orbits. The proposed work included a major upgrade to CQL3D to include finite-orbit-width effects be accounted for by performing the bounce-averages of rf and neutral beam fast ions along guiding center orbits. This CQL3D enhancement provided microwave and neutral beam contributions to neoclassical radial transport coefficients for nonthermal distributions, and substantially increased the comprehensiveness of the ion model. Additional work validated Fokker-Planck and ray tracing modeling of neutral beam and high harmonic fast wave absorption and current drive against the NSTX experiment, as had been very successful for electron cyclotron current drive in the DIII-D tokamak at General Atomics and lower hybrid waves on C-Mod at MIT. The validation work was in conjunction with staff and graduate students at Princeton Plasma Physics Laboratory. This DOE grant supported fusion energy research, a potential long-term solution to the world's energy needs. The research grant under consideration, DE-SC0006614, provided research support at the 0.3 Full-Time-Equivalent level for application of computer models to aid in understanding and projecting efficacy of heating and current drive sources in the National Spherical Torus Experiment, a tokamak variant, at the Princeton Plasma Physics Laboratory. The NSTX experiment explores the physics of very tight aspect ratio, almost spherical tokamaks, aiming at producing steady-state fusion plasmas. The current drive is an integral part of the steady-state concept, maintaining the magnetic geometry in the steady-state tokamak.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Experimental Data Sets for CFD Calculations of Flow and Heat Transfer in Deformed Fuel Assemblies

Liquid-metal fast-breeder reactors (LMFBRs) have traditionally used fuel assemblies consisting of a hexagonal array of pins enclosed in a hexagonally shaped duct. Each fuel pin is surrounded by a wire that is wrapped in a helical configuration, which is used to separate the pins sufficiently to allow sodium coolant to flow through the assembly. The helical wire wrap also promotes mixing of the coolant. Experience with these assemblies has shown that they begin to deform with time during normal operation leading to significant changes in core thermal-hydraulics. For example, deformations of assemblies in the Experimental Breeder Reactor-2 and the Fast Flux Test Facility led to pin overheating resulting from pin-to-duct and pin-to-pin contact. This problem is well known and was investigated extensively in the 1970's and early 1980's. This was a period, however, before the development of modern Computational Fluid Dynamics (CFD) computer codes. Therefore, the experiments performed at the time did not record their results in sufficient detail to be useful for compiling validation datasets for CFD codes. Most of the experiments focused only on bulk measurements, such as the pressure drop across the bundle. When the effects of deformation of the fuel assembly were investigated, the studies performed to quantify these effects considered only bare pins without the wire wrap. With the resurgence of interest in LMFBRs in recent years, particularly in designs that leverage long-life performance of the fuel, the need has arisen for data that are suitable for the validation and benchmarking of CFD codes to predict the thermal-hydraulic behavior of flow in wire-wrapped fuel bundles. Such data must include high-resolution, transient, full-field measurements of the fluid velocity and temperature and an accurate record of the test conditions, including a precise description of the geometry. This paper describes a project to produce a validation-quality set of data that can be used to benchmark CFD codes for modeling flow and thermal performance in wire-wrapped fuel assemblies of the kind used by LMFBR designs. In addition, this effort investigates the changes to the flow and other phenomena that occur in the deformed geometries that can form later in a fuel assembly's life. This work is a joint effort of four organizations. The experimental work is being performed by AREVA and Texas A and M University. The computational work, both to support the experiments and to perform blind benchmark calculations, is being done by TerraPower, LLC, and Argonne National Laboratory (ANL). The experiments use a geometry that consists of a complete assembly of 61 wire-wrapped pins, which is surrounded by a hexagonal duct. This configuration is considered the minimum size necessary to adequately capture the important results of interest, such as the thermal gradients across the assembly and the velocity field effects in the assembly resulting from the surrounding duct. These types of effects cannot be captured by a geometry consisting of only a small group of fuel pins. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Tackling the Reproducibility Problem in Systems Research with Declarative Experiment Specifications

Validating experimental results in the field of computer systems is a challenging task, mainly due to the many changes in software and hardware that computational environments go through. Determining if an experiment is reproducible entails two separate tasks: re-executing the experiment and validating the results. Existing reproducibility efforts have focused on the former, envisioning techniques and infrastructures that make it easier to re-execute an experiment. In this work we focus on the latter by analyzing the validation workflow that an experiment re-executioner goes through. We notice that validating results is done on the basis of experiment design and high-level goals, rather than exact quantitative metrics. Based on this insight, we introduce a declarative format for specifying the high-level components of an experiment as well as describing generic, testable conditions that serve as the basis for validation. We present a use case in the area of storage systems to illustrate the usefulness of this approach. We also discuss limitations and potential benefits of using this approach in other areas of experimental systems research.

97 MATHEMATICS AND COMPUTING↗

Mixing of multiple jets with a confined subsonic crossflow - Summary of NASA-supported experiments and modeling

Experimental and computational results on the mixing of single, double, and opposed rows of jets with an isothermal or variable temperature mainstream in a confined subsonic crossflow are summarized. The studies were performed to investigate flow and geometric variations typical of the complex 3D flowfield in the dilution zone of combustion chambers in gas turbine engines. The principal observations from the experiments were that the momentum-flux ratio was the most significant flow variable, and that temperature distributions were similar (independent of orifice diameter) when the orifice spacing and the square-root of the momentum-flux ratio were inversely proportional. The experiments and empirical model for the mixing of a single row of jets from round holes were extended to include several variations typical of gas turbine combustors.

Holdeman, James D.↗

Computers vs. wind tunnels for aerodynamic flow simulations

It is pointed out that in other fields of computational physics, such as ballistics, celestial mechanics, and neutronics, computations have already displaced experiments as the principal means of obtaining dynamic simulations. In the case of aerodynamic investigations, the complexity of the computational work involved in solving the Navier-Stokes equations is the reason that such investigations rely currently mainly on wind-tunnel testing. However, because of inherent limitations of the wind-tunnel approach and economic considerations, it appears that at some time in the future aerodynamic studies will chiefly rely on computational flow data provided by the computer. Taking into account projected development trends, it is estimated that computers with the required capabilities for a solution of the complete viscous, time-dependent Navier-Stokes equations will be available in the mid-1980s.

Chapman, D. R.↗

Mixing of multiple jets with a confined subsonic crossflow. Summary of NASA-supported experiments and modeling

Experimental and computational results on the mixing of single, double, and opposed rows of jets with an isothermal or variable temperature mainstream in a confined subsonic crossflow are summarized. The studies were performed to investigate flow and geometric variations typical of the complex 3-D flowfield in the dilution zone of combustion chambers in gas turbine engines. The principal observations from the experiments were that the momentum-flux ratio was the most significant flow variable, and that temperature distributions were similar (independent of orifice diameter) when the orifice spacing and the square-root of the momentum-flux ratio were inversely proportional. The experiments and empirical model for the mixing of a single row of jets from round holes were extended to include several variations typical of gas turbine combustors. Combinations of flow and geometry that gave optimum mixing were identified from the experimental results. Based on results of calculations made with a 3-D numerical model, the empirical model was further extended to model the effects of curvature and convergence. The principle conclusions from this study were that the orifice spacing and momentum-flux relationships were the same as observed previously in a straight duct, but the jet structure was significantly different for jets injected from the inner wall wall of a turn than for those injected from the outer wall. Also, curvature in the axial direction caused a drift of the jet trajectories toward the inner wall, but the mixing in a turning and converging channel did not seem to be inhibited by the convergence, independent of whether the convergence was radial or circumferential. The calculated jet penetration and mixing in an annulus were similar to those in a rectangular duct when the orifice spacing was specified at the radius dividing the annulus into equal areas.

Holdeman, James D.↗

Testing and Simulation of an Updated Cartridge Loop Vehicle

The Versatile Test Reactor (VTR) is a sodium-cooled, fast-spectrum test reactor that is being developed in the United States and will support a variety of irradiation test vehicle configurations, including cartridge loops. This work includes out-of-pile experimental results from a single-phase, natural circulation cartridge loop vehicle with geometry relevant to VTR irradiation sites, as well as comparisons between the experimental results and results predicted using the TRAC/RELAP Advanced Computational Engine (TRACE) modeling tool. The experiments were conducted in the thermosyphon test loop (TSTL) facility at Oak Ridge National Laboratory. Comparisons are also made between the current experimental data and results from natural circulation experiments previously conducted in the TSTL in a cartridge vehicle that is similar in design but has smaller flow areas. This cartridge vehicle and the experimental program were developed to add to the single-phase, natural circulation data collected in the previous iteration of the cartridge loop design, which supports future irradiation experiments and adds to a database that is useful for validating computer models. Comparisons of experimental results to TRACE model predictions is a pertinent step in validating the computational tool for supporting future irradiation experiment design and safety calculations, and comparisons to previous cartridge loop results highlight the impact of the design changes made to the test vehicle. The experiments conducted include several steady state tests and transients, including power ramp, loss of offsite power, and loss of external flow scenarios. This work shows that TRACE can accurately predict temperatures and flow conditions in the cartridge loop and the updated vehicle design achieves higher mass flow rates at the same steady state power levels.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

artG4: A Generic Framework for Geant4 Simulations

A small experiment must devote its limited computing expertise to writing physics code directly applicable to the experiment. A software 'framework' is essential for providing an infrastructure that makes writing the physics-relevant code easy. In this paper, we describe a highly modular and easy to use framework for writing Geant4 based simulations called 'artg4'. This framework is a layer on top of the art framework.

Arvanitis, Tasha↗

Position Papers for the ASCR Workshop on Cybersecurity and Privacy for Scientific Computing Ecosystems

At the request of the Department of Energy's (DOE) Office of Advanced Scientific Computing Research (ASCR), this program committee has been tasked with organizing a workshop to identify basic research needs in cybersecurity and privacy to better support DOE's science and energy mission. As part of the process, the program committee is soliciting community input in the form of position papers to help identify significant use cases, facility issues, and other barriers to enabling verifiably trustworthy computational science while preserving data confidentiality as appropriate for scientific workflows of interest to DOE. The program committee will review these position papers and based on the fit of their area of expertise and interest, selected contributors will have the opportunity to participate in the workshop currently planned as a virtual event November 3-5th, 2021. The thrust areas that will be explored by this workshop are the following: (1) Algorithms for secure, scalable, privacy-enhancing technologies and frameworks, including: Federated AI/ML, Differential privacy, Randomized algorithms, Adversarial modeling & simulation, Graph algorithms, and Formal methods; (2) Platforms to support the entire scientific-computing ecosystem, including edge computing for large-scale experiments, focusing on heterogeneous systems and distributed systems, including: Heterogeneous computing systems, Distributed computing systems, and Secure data architectures; and (3) Data workflows to allow agile use of data while preserving integrity and privacy, making the important properties verifiable either at runtime or post-computation, including: Integrity and provenance and Data management infrastructure. Topics that are out-of-scope for the workshop include discussing specific proposed solutions or areas that are clearly out of DOE's fundamental and applied-sciences mission scope, e.g., cryptography, enterprise security, and general-operations technology.

97 MATHEMATICS AND COMPUTING↗

Comparing computational times for simulations when using PBPK model template and stand-alone implementations of PBPK models

Introduction We previously developed a PBPK model template that consists of a single model “superstructure” with equations and logic found in many physiologically based pharmacokinetic (PBPK) models. Using the template, one can implement PBPK models with different combinations of structures and features. Methods To identify factors that influence computational time required for PBPK model simulations, we conducted timing experiments using various implementations of PBPK models for dichloromethane and chloroform, including template and stand-alone implementations, and simulating four different exposure scenarios. For each experiment, we measured the required computational time and evaluated the impacts of including various model features (e.g., number of output variables calculated) and incorporating various design choices (e.g., different methods for estimating blood concentrations). Results We observed that model implementations that treat body weight and dependent quantities as constant (fixed) parameters can result in a 30% time savings compared with options that treat body weight and dependent quantities as time-varying. We also observed that decreasing the number of state variables by 36% in our PBPK model template led to a decrease of 20–35% in computational time. Other factors, such as the number of output variables, the method for implementing conditional statements, and the method for estimating blood concentrations, did not have large impacts on simulation time. In general, simulations with PBPK model template implementations of models required more time than simulations with stand-alone implementations, but the flexibility and (human) time savings in preparing and reviewing a model implemented using the PBPK model template may justify the increases in computational time requirements. Conclusion Our findings concerning how PBPK model design and implementation decisions impact computational speed can benefit anyone seeking to develop, improve, or apply a PBPK model, with or without the PBPK model template.

Bernstein, Amanda S.↗