Search NASA⌕ Search

SEARCH · Search NASA

Results for “conduction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,639 records · Page 91

Thermal conductivity of half-Heusler compounds from first-principles calculations

We demonstrate successful application of first-principles-based thermal conductivity calculation on half-Heusler compounds that are promising, environmentally friendly thermoelectric materials. Taking the case of a p -type half-Heusler structure, the harmonic and anharmonic interatomic force constants were obtained from a set of force-displacement data calculated by the density functional theory. Thermal conductivity was obtained by two different methods: (1) Boltzmann-Peierls formula with phonon relaxation times calculated by either Fermi's golden rule of three-phonon scattering processes or spectral analysis of molecular dynamics phase space trajectories and (2) Green-Kubo formula for heat current obtained by equilibrium molecular dynamics simulations. The calculated temperature dependence of thermal conductivity is in reasonable agreement with experiments. The method was extended to alloy crystals assuming the transferability of interatomic force constants. By having access to accurate phonon-dependent transport properties, the contribution from an arbitral subset of phonon modes can be quantified. Furthermore, this helps understanding the influence of nanostructures on thermal conductivity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Thermal conductivity of amorphous and nanocrystalline silicon films prepared by hot-wire chemical-vapor deposition

We report 3..omega.. thermal conductivity measurements of amorphous and nanocrystalline silicon thin films from 85 to 300 K prepared by hot-wire chemical-vapor deposition, where the crystallinity of the films is controlled by the hydrogen dilution during growth. The thermal conductivity of the amorphous silicon film is in agreement with several previous reports of amorphous silicon prepared by a variety of deposition techniques. The thermal conductivity of the as-grown nanocrystalline silicon film is 70% higher and increases 35% more after an anneal at 600 degrees C. They all have similarly weak temperature dependence. Structural analysis shows that the as-grown nanocrystalline silicon is approximately 60% crystalline, nanograins and grain boundaries included. The nanograins, averaging 9.1 nm in diameter in the as-grown film, are embedded in an amorphous matrix. The grain size increases to 9.7 nm upon annealing, accompanied by the disappearance of the amorphous phase. We extend the models of grain boundary scattering of phonons with two different non-Debye dispersion relations to explain our result of nanocrystalline silicon, confirming the strong grain size dependence of heat transport for nanocrystalline materials. However, the similarity in thermal conductivity between amorphous and nanocrystalline silicon suggests the heat transport mechanisms in both structures may not be as dissimilar as we currently understand.

14 SOLAR ENERGY↗

Effects of Anisotropic Thermal Conductivity in Magnetohydrodynamics Simulations of a Reversed-Field Pinch

A compressible magnetohydrodynamics simulation of the reversed-field pinch is performed including anisotropic thermal conductivity. When the thermal conductivity is much larger in the direction parallel to the magnetic field than in the perpendicular direction, magnetic field lines become isothermal. As a consequence, as long as magnetic surfaces exist, a temperature distribution is observed displaying a hotter confined region, while an almost uniform temperature is produced when the magnetic field lines become chaotic. To include this effect in the numerical simulation, we use a multiple-time-scale analysis, which allows us to reproduce the effect of a large parallel thermal conductivity. The resulting temperature distribution is related to the existence of closed magnetic surfaces, as observed in experiments. The magnetic field is also affected by the presence of an anisotropic thermal conductivity.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Field-Dependent Ionic Conductivities from Generalized Fluctuation-Dissipation Relations

We derive a relationship for the electric field dependent ionic conductivity in terms of fluctuations of time integrated microscopic variables. We demonstrate this formalism with molecular dynamics simulations of solutions of differing ionic strength with implicit solvent conditions and molten salts. These calculations are aided by a novel nonequilibrium statistical reweighting scheme that allows for the conductivity to be computed as a continuous function of the applied field. In strong electrolytes, we find the fluctuations of the ionic current are Gaussian, and subsequently, the conductivity is constant with applied field. In weaker electrolytes and molten salts, we find the fluctuations of the ionic current are strongly non-Gaussian, and the conductivity increases with applied field. Furthermore, this nonlinear behavior, known phenomenologically for dilute electrolytes as the Onsager-Wien effect, is general and results from the suppression of ionic correlations at large applied fields, as we elucidate through both dynamic and static correlations within nonequilibrium steady states.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Strong anharmonicity dictates ultralow thermal conductivities of type-I clathrates

Type-I clathrate solids have attracted significant interest due to their ultralow thermal conductivities and sub- sequent promise for thermoelectric applications, yet the mechanisms underlying these properties are not well understood. Here, we extend the framework of vibrational dynamical mean-field theory (VDMFT) to calculate temperature-dependent thermal transport properties of solids using a many-body Green’s function approach. When applied to a coarse-grained description of 𝑋 8 Ga 16 Ge 30 , where 𝑋= Ba, Sr, we find that nonresonant scattering between cage acoustic modes and rattling modes leads to a reduction of acoustic phonon lifetimes and thus thermal conductivities. Moreover, we find that the moderate temperature dependence of conductivities above 300 K, which is consistent with experimental measurements, cannot be reproduced by textbook perturbation theory calculations, which predict a 𝑇 −1 dependence. Therefore, we suggest that nonperturbative anharmonic effects, including four- and higher-phonon scattering processes, are responsible for the ultralow thermal conductivities of type-I clathrates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Conceptual Design of a Conduction-Cooled Superconducting Undulator

In superconducting undulators (SCUs) that are currently operating at the Advanced Photon Source, the undulator magnets are indirectly cooled with liquid helium penetrating through channels in the magnet cores. The liquid helium is stored in a tank that is cooled by cryocoolers. However, a cryogen-free version of a superconducting undulator in which the undulator magnets are conduction-cooled is also possible, as has been realized in the SCUs developed at ANKA. We are currently working on a conceptual design of a conduction-cooled planar superconducting undulator. The measured load lines of cryocoolers and the measured thermal conductance of various thermal links are used in the thermal analysis. Also, various materials for the undulator magnet cores are being considered. This paper reports the thermal design of a conduction-cooled planar SCU.

cryocooler↗

Study on Conduction Cooling of Superconducting Magnets for the ILC Main Linac

In the main linac of the International Linear Collider (ILC), superconducting magnets for beam focusing and steering will be located periodically in superconducting RF (SRF) cavity string for beam acceleration in common cryomodules. A concept of conduction cooling of the combined-functioned, splittable superconducting magnets has been proposed and investigated to adapt much different features and to meet different requirements for the superconducting magnet and SRF cavity in fabrication, assembly, and operation. It is required to integrate the superconducting magnet after the SRF cavity string assembly which completed under an ultra-clean environment. The magnet must be conductively cooled down through thermal links to a liquid helium supply pipe. According to this concept, a model magnet development was carried out in cooperation with Fermilab and KEK, and has been demonstrated in KEK superconducting RF test facility (STF). In addition, an important issue has been recently identified. High gradient SRF cavities naturally emit field emission electron flux from the inner surface, so-called dark current. It may pass through the subsequent SRF cavity string and penetrate into the superconducting magnets placed downstream. It may heat up the superconducting coils, and may cause a quench. Therefore, further study on reliable conduction cooling and to secure the superconducting magnet operation with a keeping sufficient safety margin is quite essential. In this paper, we report the installation, the improvement achieved in STF, and the R&D progress in the study on the conduction cooling of the superconducting magnet for the ILC main linac.

43 PARTICLE ACCELERATORS↗

Effect of Strain on the Resistivity and Thermal Conductivity of High Purity Niobium

High purity niobium (Nb) is a technologically important material for large-scale accelerator and nano-scale quantum computing applications in microwave frequency range. The high thermal conductivity and low resistivity of Nb are critical to the high performance at temperature range of 0.01–4.0 K. The presence of interstitials such as O, N, H, and C act as scattering centers and alter the mean free path, reducing resistivity and thermal conductivity, and contributing significantly to Nb's thermal performance for temperatures of 2.0 K and above. The residual resistivity ratio (RRR), defined as the ratio of the normal state resistivity at 300 K to that at 4.2 K (Nb, T c = 9.2 K), is an accepted direct estimate of the impurity content of fully recrystallized Nb. Complete re-crystallization of Nb is challenging unless very high temperatures are employed, which is often impractical, hence, in practice, dislocation and dislocation structures impact the thermal performance of Nb due to strong phonon scattering contributions. Furthermore, this paper reports on the degradation of thermal conductivity and RRR of high purity Nb large grain, single crystal with fixed impurity, varying strain, and dislocation content levels. Experimental thermal conductivity data fits the Boltzmann transport equation incorporating dislocation density.

36 MATERIALS SCIENCE↗

Thermal conductivity studies of CdZnTe with varying Te excess

Cadmium Zine Telluride (CZT) has been extensively studied as a room temperature semiconductor gamma radiation detector. CZT continues to show promise as a bulk and pixelated gamma spectrometer with less than one percent energy resolution; however the fabrication costs are high. Improved yields of high quality, large CZT spectroscopy grade crystals must be achieved. CZT is grown by the Traveling Heater Method (THM) with a Te overpressure to account for vaporization losses. This procedure creates Te rich zones. During growth, boules will often cleave limiting the number of harvestable crystals. As a result, crystal growth parameter optimization was evaluated by modeling the heat flow within the system. Interestingly, Cadmium Telluride (CdTe) is used as a thermal conductivity surrogate in the absence of a thorough study of the CZT thermal properties. The current study has measured the thermal conductivity of CZT pressed powders with varying Te concentrations from 50-100% over 25-800°C to understand the variation in this parameter from CdTe. Cd0.9Zn0.1Te1.0 is the base CZT (designated 50%). CZT exhibits a thermal conductivity of nearly 1 W/mK, an order of magnitude greater than CdTe. Lastly, the thermal conductivity decreased with increasing Te concentration.

36 MATERIALS SCIENCE↗

Relationship between the defect structure and fluorine-ion conductivity of La{sub 1−y}Sr{sub y}F{sub 3−y} (0 ⩽ y ⩽ 0.15) crystals according to X-ray and neutron diffraction data

The defect structure of crystals of as-grown nonstoichiometric tysonite (LaF{sub 3} type) La{sub 1−y}Sr{sub y}F{sub 3−y} phase (y = 0, 0.05, 0.07, and 0.15) has been investigated by X-ray diffraction and neutron diffraction. A concentration-driven structural transition from the β-La{sub 1−y}Sr{sub y}F{sub 3−y} modification to the α-La{sub 1−y}Sr{sub y}F{sub 3−}y modification in the range y = 0.05–0.10 has been observed for the first time. This transition correlates with the maximum of fluorine-ion conductivity (y = 0.05 ± 0.02) and the maximum in the melting curve (y = 0.07 ± 0.03). β-LaF{sub 3} and β-La{sub 0.95}Sr{sub 0.05}F{sub 2.95} crystals belong to the trigonal system (sp. gr. P3̄c1, Z = 6) and are twinned according to the merohedral twin law. Fine changes in the fluorine sublattice of β-La{sub 0.95}Sr{sub 0.05}F{sub 2.95} increase conductivity σ{sub 293K} to 3 × 10{sup −4} S/cm; hence, these crystals can be used as fluorine-conducting solid electrolytes (FCSEs) in solid-state ionics devices. Additional possibilities of ion transport over twin joints are discussed. In α-La{sub 0.85}Sr{sub 0.15}F{sub 2.85} crystal the symmetry group changes to P6{sub 3}/mmc, Z = 2; it is not twinned and its fluorine-ion conductivity is reduced.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fluorine-ion conductivity of different technological forms of solid electrolytes R{sub 1–y}M{sub y}F{sub 3–y} (LaF{sub 3} Type ) (M = Ca, Sr, Ba; R Are Rare Earth Elements)

We have investigated the conductivity of some representatives of different technological forms of fluoride-conducting solid electrolytes R{sub 1–y}M{sub y}F{sub 3–y} (M = Ca, Sr, Ba; R are rare earth elements) with an LaF{sub 3} structure: single crystals, cold- and hot-pressing ceramics based on a charge prepared in different ways (mechanochemical synthesis, solid-phase synthesis, and fragmentation of single crystals), polycrystalline alloys, etc. It is shown (by impedance spectroscopy), that different technological forms of identical chemical composition (R, M, y) exhibit different electrical characteristics. The maximum conductivity is observed for the single-crystal form of R{sub 1–y}M{sub y}F{sub 3–y} tysonite phases, which provides (in contrast to other technological forms) the formation of true volume ion-conducting characteristics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Increase in the Fluorine-Ion Conductivity of Single Crystals of Tysonite-type CeF{sub 3} Superionic Conductor by Substituting Polarized Cd{sup 2+} Ions for Ce{sup 3+} Ions

The fluorine-ion conductivity of single crystals with a tysonite (LaF{sub 3}) structure with heterovalent isomorphic substitutions of highly polarizable Cd{sup 2+} cations with a 18-electron shell for rare earth ions Ce{sup 3+} have been studied for the first time. Ce{sub 0.995}Cd{sub 0.005}F{sub 2.995} single crystals have been grown from melt by the Bridgman technique in a fluorinating atmosphere. The fluorine-ion conductivity of single crystal is measured by impedance spectroscopy in the temperature range from 153 to 1073 K, where it increases by a factor of 10{sup 9}, approaching the value σ{sub dc} = 5 × 10{sup –2} S/cm at 1073 K. At T{sub 0} = 450 ± 20 K, the dependence σ{sub dc}(T) is split into two portions with the ion-transport activation enthalpy ΔH{sub σ} = 0.39 ± 0.01 eV (T < T{sub 0}) and ΔH{sub σ} = 0.23 ± 0.02 eV (T > T0). It is found that at T = 293 K the conductivity σ{sub dc} = 3 × 10{sup –5} S/cm of Ce{sub 0.995}Cd{sub 0.005}F{sub 2.995} crystal is higher by a factor of 10 than the conductivity of the tysonite matrix CeF{sub 3} and close to the σ{sub dc} value for Ce{sub 0.995}Sr{sub 0.005}F{sub 2.995} crystal. This finding indicates a significant effect of the substitutions of Cd{sup 2+} ions for Ce{sup 3+} on the σdc value and the advantage of Cd{sup 2+} ions over Ca{sup 2+} and Ba{sup 2+} from the viewpoint of increasing σ{sub dc}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Negative differential conductance in InAs wire based double quantum dot induced by a charged AFM tip

We investigate the conductance of an InAs nanowire in the nonlinear regime in the case of low electron density where the wire is split into quantum dots connected in series. The negative differential conductance in the wire is initiated by means of a charged atomic force microscope tip adjusting the transparency of the tunneling barrier between two adjoining quantum dots. We confirm that the negative differential conductance arises due to the resonant tunneling between these two adjoining quantum dots. The influence of the transparency of the blocking barriers and the relative position of energy states in the adjoining dots on a decrease of the negative differential conductance is investigated in detail.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Calculation of Thermal Conductivity Coefficients of Electrons in Magnetized Dense Matter

The solution of Boltzmann equation for plasma in magnetic field with arbitrarily degenerate electrons and nondegenerate nuclei is obtained by Chapman−Enskog method. Functions generalizing Sonine polynomials are used for obtaining an approximate solution. Fully ionized plasma is considered. The tensor of the heat conductivity coefficients in nonquantized magnetic field is calculated. For nondegenerate and strongly degenerate plasma the asymptotic analytic formulas are obtained and compared with results of previous authors. The Lorentz approximation with neglecting of electron−electron encounters is asymptotically exact for strongly degenerate plasma. For the first time, analytical expressions for the heat conductivity tensor for nondegenerate electrons in the presence of a magnetic field are obtained in the three-polynomial approximation with account of electron−electron collisions. Account of the third polynomial improved substantially the precision of results. In the two-polynomial approximation, the obtained solution coincides with the published results. For strongly degenerate electrons, an asymptotically exact analytical solution for the heat conductivity tensor in the presence of a magnetic field is obtained for the first time. This solution has a considerably more complicated dependence on the magnetic field than those in previous publications and gives a several times smaller relative value of the thermal conductivity across the magnetic field at ωτ * 0.8.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Features of the mechanism of electrical conductivity of semiinsulating CdTe crystals

Temperature dependence of electrical characteristics of p-CdTe semi4nsulating single-crystals are studied, and substantial features of their electrical conductivity not described in available publications are revealed. The activation energy of the p-type conduction material close to the intrinsic one can be both lower and higher than the half-width of the band gap of semi conductor. The results of the analysis of statistics of electrons and holes based on the electroneutrality equation showed that the observed features of electrical properties of the material can be interpreted based on the specific features of compensation processes. The procedure of determining the ionization energy and degree of compensation of acceptors responsible for electrical conductivity of the material is suggested. It is shown that, in the limits of climatic temperature variations, inversion of the conduction type can be observed, and, as a consequence, the Schottky contact can disappear in the CdTe-based detector of the X-ay and {gamma} radiation.

36 MATERIALS SCIENCE↗

Low-temperature conductivity in CuGaS{sub 2} single crystals

CuGaS{sub 2} single crystals are grown by the Bridgman-Stockbarger method. X-ray diffraction and Raman studies are performed. It is shown that the conductivity at low temperatures has an activation mechanism: in the range of 100–300 K, impurity conduction with an acceptor activation energy of 12 meV dominates; at temperatures below 100 K, Mott conductivity, i.e., so-called hopping conductivity with a variable hop length prevails. The density of localized states and the average carrier hop length are estimated.

36 MATERIALS SCIENCE↗

Effects of Mechanical Strain on Ionic Conductivity in the Interface between LiPON and Ni-Mn Spinel

We present first-principles calculations to understand ionic conductivity in the interface between lithium phosphorous oxynitride (LiPON) and Ni-Mn spinel (LNM), with emphasis on the effect of mechanical strain. Two LiPON/LNM interfaces, one with and the other without BaTiO3 (BTO) additive, are modeled as abrupt interfaces to minimize the effects of the space-charge layer formation. It is observed that the interface with BTO additive has higher ionic conductivity than the other. Comparison of structural geometry indicates that the LiPON part of the LiPON/LNM interface is contracted but it recovers with BTO additive, which suggests the relevance of mechanical strain to ionic conductivity in these interfaces and the role of BTO in controlling the mechanical strain. The activation energy barriers of Li-hopping in a bulk LiPON, calculated at different levels of mechanical strain, exhibit a significant increase with compressive strain, supporting the suggested effect of mechanical strain in the interfaces. Lastly, this result implies that ionic conductivity in the interface between LiPON and cathode can be enhanced by modifying the interface but with appropriate size and distribution of additives.

25 ENERGY STORAGE↗

Composition and Manufacturing Effects on Electrical Conductivity of Li/FeS 2 Thermal Battery Cathodes

The electrical conductivity is key to the performance of thermal battery cathodes. In this work we present the effects of manufacturing and processing conditions on the electrical conductivity of Li/FeS2 thermal battery cathodes. Finite element simulations were used to compute the conductivity of three-dimensional microcomputed tomography cathode microstructures and compare results to experimental impedance spectroscopy measurements. A regression analysis reveals a predictive relationship between composition, processing conditions, and electrical conductivity; a trend which is largely erased after thermally-induced deformation. Moreover, the trend applies to both experimental and simulation results, although is not as apparent in simulations. This research is a step toward a more fundamental understanding of the effects of processing and composition on thermal battery component microstructure, properties, and performance.

25 ENERGY STORAGE↗