Search NASA⌕ Search

SEARCH · Search NASA

Results for “distributed electronics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,639 records · Page 91

Time-dependent charge distributions in polymer films under electron beam irradiation

The time-dependent charge distribution in polymer film under electron beam irradiation is studied by both experiment and numerical simulation. In the experiment, the distribution is measured with the piezoinduced pressure wave propagation method. In the simulation, the initial charge distribution is obtained by the Monte Carlo method of electron scattering, and the charge drift in the specimen is simulated by taking into account the Poisson equation, the charge continuity equation, Ohm's law, and the radiation-induced conductivity. The results obtained show that the negative charge deposited in the polymer film, whose top and bottom surfaces are grounded, drifts toward both grounded electrodes and that twin peaks appear in the charge distribution. The radiation-induced conductivity plays an important role in determining the charge distribution in the polymer films under electron beam irradiation.

36 MATERIALS SCIENCE↗

Path integral Monte Carlo calculation of the momentum distribution of the homogeneous electron gas at finite temperature

Path integral Monte Carlo (PIMC) simulations are employed to calculate the momentum distribution of the homogeneous electron gas at finite temperature. Open paths are introduced to sample off-diagonal elements of the real-space density matrix. Here it is demonstrated how the restricted PIMC method can be extended to incorporate open paths in order to allow for the simulations in fermionic systems where a sign problem is present. The computed momentum distribution shows significant deviations from behavior of free fermions when strong correlations are present but agrees with predictions from variational methods.

36 MATERIALS SCIENCE↗

Maximum Energies of Shock-Accelerated Electrons in Young Shell Supernova Remnants

Young supernova remnants (SNRs) are often assumed to be the source of cosmic rays up to energies approaching the slight steepening in the cosmic ray spectrum at around 1000 TeV, known as the "knee." We show that the observed X-ray emission of 14 radio-bright shell remnants, including all five historical shells, can be used to put limits on E(sub max), the energy at which the electron energy distribution must steepen from its slope at radio-emitting energies. Most of the remnants show thermal spectra, so any synchrotron component must fall below the observed X-ray fluxes. We obtain upper limits on E(sub max) by considering the most rapid physically plausible cutoff in the relativistic electron distribution, an exponential, which is as sharp or sharper than found in any more elaborate models. This maximally curved model then gives us the highest possible E(sub max) consistent with not exceeding observed X-rays. Our results are thus independent of particular models for the electron spectrum in SNRs. Assuming homogeneous emitting volumes with a constant magnetic field strength of 10 uG, no object could reach 1000 TeV, and only one, Kes 73, has an upper limit on E(sub max), above 100 TeV. All the other remnants have limits at or below 80 TeV. E(sub max) is probably set by the finite remnant lifetime rather than by synchrotron losses for remnants younger than a few thousand years, so that an observed electron steepening should be accompanied by steepening at the same energy for protons. More complicated, inhomogeneous models could allow higher values of E(sub max) in parts of the remnant, but the emission-weighted average value, that characteristic of typical electrons, should obey these limits. The young remnants are not expected to improve much over their remaining lives at producing the highest energy Galactic cosmic rays; if they cannot, this picture of cosmic-ray origin may need major alteration.

Reynolds, Stephen P.↗

Influence of dust-particle concentration on gas-discharge plasma

A self-consistent kinetic model of a low-pressure dc glow discharge with dust particles based on Boltzmann equation for the electron energy distribution function is presented. The ions and electrons production in ionizing processes as well as their recombination on the dust-particle surface and on the discharge tube wall were taken into account. The influence of dust-particle concentration N{sub d} on gas discharge and dust particles parameters was investigated. It is shown that the increase of N{sub d} leads to the increase of an averaged electric field and ion density, and to the decrease of a dust-particle charge and electron density in the dusty cloud. The results were obtained in a wide region of different discharge and dusty plasma parameters: dust particles density 10{sup 2}-10{sup 8} cm{sup -3}, discharge current density 10{sup -1}-10{sup 1} mA/cm{sup 2}, and dust particles radius 1, 2, and 5 mum. The scaling laws for dust-particle surface potential and electric filed dependencies on dust-particle density, particle radius and discharge currents were revealed. It is shown that the absorption of electrons and ions on the dust particles surface does not lead to the electron energy distribution function depletion due to a self-consistent adjustment of dust particles and discharge parameters.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Fully nonlinear ion-acoustic solitary waves in a plasma with positive-negative ions and nonthermal electrons

Properties of fully nonlinear ion-acoustic solitary waves in a plasma with positive-negative ions and nonthermal electrons are investigated. For this purpose, the hydrodynamic equations for the positive-negative ions, nonthermal electron density distribution, and the Poisson equation are used to derive the energy integral equation with a new Sagdeev potential. The latter is analyzed to examine the existence regions of the solitary pulses. It is found that the solitary excitations strongly depend on the mass and density ratios of the positive and negative ions as well as the nonthermal electron parameter. Numerical solution of the energy integral equation clears that both positive and negative potentials exist together. It is found that faster solitary pulses are taller and narrower. Furthermore, increasing the electron nonthermality parameter (negative-to-positive ions density ratio) decreases (increases) the localized excitation amplitude but increases (decreases) the pulse width. The present model is used to investigate the solitary excitations in the (H{sup +},O{sub 2}{sup -}) and (H{sup +},H{sup -}) plasmas, where they are presented in the D- and F-regions of the Earth's ionosphere. This investigation should be helpful in understanding the salient features of the fully nonlinear ion-acoustic solitary waves in space and in laboratory plasmas where two distinct groups of ions and non-Boltzmann distributed electrons are present.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Whistler side-band growth due to nonlinear wave-particle interaction.

The distortion caused by a large-amplitude whistler (with wave normal parallel to the static magnetic field) on the energetic-electron velocity distribution of a predominantly cold magnetoplasma is derived analytically. Whistler test waves impressed on the perturbed magnetoplasma and within two narrow bands centered on the frequency of the original wave may experience large consecutive growth at the early stages of the wave-particle interaction if the unperturbed energetic-electron distribution satisfies two specified conditions. The relevance of these whistler side bands to magnetospheric phenomena is assessed; in particular, an identification of the onset of artificially stimulated emissions with the creation of whistler side bands gives good agreement with observations.

Brinca, A. L.↗

Positive Column of a High-Modulation Depth Discharge Current Without Stepwise Ionization

The positive column of a gas discharge in helium is investigated for high-modulation-depth discharge current without stepwise ionization. The electron energy distribution function for different discharge current oscillation phases, the electron concentration, and the longitudinal electric field strength are measured in helium gas-discharge plasma. The electric field modulation effect and the change of the electron energy distribution function over the period at frequencies less than the reciprocal ambipolar diffusion time are detected.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Auger decay of 1 σ g and 1 σ u hole states of the N 2 molecule: Disentangling decay routes from coincidence measurements

Results of the most sophisticated measurements in coincidence with the angular-resolved K-shell photoelectrons and Auger electrons and with two atomic ions produced by dissociation of N 2 molecule are analyzed. Detection of photoelectrons at certain angles makes it possible to separate the Auger decay processes of the 1σ g and 1σ u core-hole states. The Auger electron angular distributions for each of these hole states are measured as a function of the kinetic-energy release of two atomic ions and are compared with the corresponding theoretical angular distributions. From that comparison one can disentangle the contributions of different repulsive doubly charged molecular ion states to the Auger decay. Different kinetic-energy-release values are directly related to the different internuclear distances. In this way one can trace experimentally the behavior of the potential energy curves of dicationic final states inside the Frank-Condon region. Presentation of the Auger-electron angular distributions as a function of kinetic-energy release of two atomic ions opens a new dimension in the study of Auger decay.

74 ATOMIC AND MOLECULAR PHYSICS↗

Computational study of plasma sustainability in radio frequency micro-discharges

We apply an implicit particle-in-cell Monte-Carlo (PIC-MC) method to study a radio-frequency argon microdischarge at steady state in the glow discharge limit, in which the microdischarge is sustained by secondary electron emission from the electrodes. The plasma density, electron energy distribution function (EEDF), and electron temperature are calculated in a wide range of operating conditions, including driving voltage, microdischarge gap, and pressure. Also, the effect of gap size scaling (in the range of 50-1000 μm) on the plasma sustaining voltage and peak electron density at atmospheric pressure is examined, which has not been explored before. In our simulations, three different EEDFs, i.e., a so-called three temperature hybrid mode, a two temperature α mode, and a two temperature γ mode distribution, are identified at different gaps and voltages. The maximum sustaining voltage to avoid a transition from the glow mode to an arc is predicted, as well as the minimum sustaining voltage for a steady glow discharge. Our calculations elucidate that secondary electrons play an essential role in sustaining the discharge, and as a result the relationship between breakdown voltage and gap spacing is far away from the Paschen law at atmospheric pressure.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Calculation of Dyson orbitals using a symmetry-adapted-cluster configuration-interaction method for electron momentum spectroscopy: N{sub 2} and H{sub 2}O

The symmetry-adapted-cluster (SAC) configuration-interaction (CI) theory was introduced to interpret the non-coplanar symmetric (e,2e) results. Dyson orbitals derived from the bench-marked SAC CI general-R method were utilized for computing the electron momentum distributions. The corresponding excitation energies and spectroscopic factors can be used to reproduce the ionization spectra. The implementation was demonstrated by examples of N{sub 2} and H{sub 2}O. The electron momentum distributions calculated using SAC CI method were compared with recent experimental results, as well as the Hartree-Fock and density-functional-theory calculations. The SAC CI method gave the best performance on the description of the experimental momentum distributions. It was found that the electron momentum distributions of Dyson orbitals related to the satellite lines can be notably different from those of their parent orbitals due to the electron correlation in the initial target states. Present work demonstrated that the SAC CI theory is a very useful and accurate tool for interpreting high-resolution electron momentum spectroscopy results.

74 ATOMIC AND MOLECULAR PHYSICS↗

Nano-scale characterization of GaAsP/GaAs strained superlattice structure by nano-beam electron diffraction

Distribution of lattice strain in a GaAsP/GaAs superlattice with a periodicity of 10 nm thickness, deposited on a 100 nm GaAs basal layer has been measured by nano-beam electron diffraction. The superlattice on the (001) plane of the basal GaAs layer shows a constant lattice strain from the bottom to the top layers, whereas the superlattice on the basal GaAs surface sloped by 16° from the (001) plane shows a variation of the lattice strain and crystal orientation. The difference of the strain distributions was discussed from the viewpoint of average strain. This tilt was explained by an atomistic model.

36 MATERIALS SCIENCE↗

Particle Size Analysis and Distribution

Scanning Electron Microscope (SEM) is a instrument used for examining samples at magnifications from 32 X to 500,000 X (for our instrument). The SEM is attached with an electron gun and is directed onto the sample. The sample then produces an image where it is read on the monitor. The electron gun is positioned at the top because it needs to shoot at the sample that is being tested. The electrons are then shot in a downward motion traveling through several lenses, such as the condenser lens for a more precise reading. Once the samples have been read by the instrument, it will show a picture that has a certain number of particles. Particle size distribution have many uses that are essential to life habits (health) or even conventional use for example construction. Here are just a few examples of how particle size analysis and distribution are being used even today. This Standard Reference Material (SRM) is primarily intended for use in the calibration of equipment used to measure particle size distributions (PSD) in the 9 μm to 30 μm range. A unit of SRM 1984 consists of a single bottle containing approximately 14 g of tungsten carbide/cobalt powder. Certified values: The PSD values at five mass percentiles were measured by scanning electron microscopy (SEM) and laser light scattering (LLS). The NIST certified PSD values by SEM are listed. These certified values were determined by the measurement of over 10 000 individual particles from three bottles. Comparing the certified NIST SRM 1984 tungsten carbide/cobalt powder with our results are almost identical. This is great because more accurate work can be done and proves that our laboratory is able to reproduce NIST results. In conclusion, the scanning electron microscope is used to capture the sampled element and display it to be counted. Without the use of particle distribution, it would be a difficult time to get necessities such as medicine, asthma pumps, constructing materials, or as simple as ink. Overall, our study is an experimental comparison of the techniques we have in house, which are LLS and SEM (combined with the NIH ImageJ software) using the NIST SRM-1984 as a common, well characterized sample so that we have an idea of how the results from the techniques compare.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Time-dependent runaway electron simulations: Ampere–Faraday equations implemented in CQL3D

The runaway electron (RE) distributions driven by a large toroidal electric field induced by the drop in the temperature profile due to disruption or pellets are comprehensively simulated by the 3D Fokker–Planck (FP) solver CQL3D (Harvey and McCoy 1992 Proc. of IAEA TCM ), recently coupled to the Ampere–Faraday (AF) equations. The evolution of the toroidal current in a plasma occurs on a resistive time scale, τ res = 4 πa 2 /( c 2 η ), which is typically of the order of seconds in present tokamaks. Here, a and η are respectively plasma radius or radial extent of a current density perturbation, and Ohmic resistivity. From the Faraday EM equation, the toroidal electric field is proportional to the time derivative of the poloidal magnetic field, which, from the Ampere equation, is proportional to the toroidal current. Thus, the toroidal electric field rapidly increases due to an abrupt temperature drop decrease in conductivity, to prevent change in the toroidal current faster than τ res . This is a example of Lenz's law. For example, in simulations with KPRAD (Whyte et al 2003 J. Nucl. Mater . 313–6 1239) of neon pellet injection into a DIII-D shot, T e drops from 2 keV to 10 eV in 0.1 ms and Z eff increases 1–4, giving that the electric field increases 3500× to 0.8 V cm -1 . As described in Harvey et al (2000 PoP 7 4590), this places much of the tail electron distribution beyond the Dreicer runaway velocity, giving so-called 'hot-tail runaways' which for a time are the dominant source of runaways, more so than the knockon source. In this prior calculation, performed for a single flux surface, the toroidal current density is held constant, on the basis that τ res is large. Most of the initial current can be converted to runaway current, which is then dangerous, particularly for ITER. A more comprehensive A–F model recently implemented in CQL3D, taking into account the time-development of the full-plasma-width toroidal electric field on time-scales of order τ res applies an iterative technique for the toroidal field previously developed for a different application (Kupfer et al 1996 PoP 3 3644), maintaining the implicit-in-time evolution of CQL3D. The degree of runaway current formation is reduced in AF augmented CQL3D, but the basic mechanism of 'hot-tail runaways' remains a dominant contribution to the REs at early times after the T e drop in these simulations. On the other hand, a NIMROD (Sovinec et al 2004 J. Comput. Phys. 195 355 ) simulation of shattered-pellet shutdown of DIII-D plasma (Kim 2018 APS/DPP Meeting), gives a slower thermal quench; when the plasma profiles and electric field are coupled one-way to CQL3D, the 'hot-tail' REs are much less, and growth of RE is dominated by the knockon process.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Probing quantum entanglement with generalized parton distributions at the Electron-Ion Collider

Within the collinear factorization framework based on generalized parton distributions, we calculate the spin density matrix of exclusively produced quark and antiquark pairs $𝑢\bar{𝑢}$, $𝑑⁢\bar{d}$, $𝑠⁢\bar{𝑠}$, $𝑐\bar{⁢𝑐}$, $𝑏\bar{𝑏}$ in electron-proton scattering. The presence of both real and imaginary parts in the scattering amplitudes leads to a rich pattern of entanglement between the quark and the antiquark. We map out kinematical regions where the pairs exhibit entanglement, Bell nonlocality, and nonstabilizerness. We also predict that massive quarks and antiquarks are transversely polarized, similar to the well-known transverse hyperon polarization in unpolarized collisions. In strangeness, charm, and bottom productions, the polarization can reach 50%–80% in certain kinematic regions in the low-energy runs of the Electron-Ion Collider.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Langmuir Probe Measurements of Inductively Coupled Plasmas in CF4/Ar/O2 Mixtures

Fluorocarbon gases, such as CF4, and their mixtures are widely used in contemporary low-pressure and high-density plasma processing techniques. In such plasmas Langmuir probe is one of the most commonly employed diagnostic techniques to obtain electron number density (ne), electron temperature (Te), electron energy distribution function (EEDF), mean electron energy (Ee), ion number density (ni), and plasma potential (Vp). In this paper we report probe data for planar inductively coupled plasmas in CF4/O2/Ar mixtures. By varying the relative concentrations in the mixture, radial profiles of ne, ni, Te, Ee, Vp, EEDF were measured in the mid-plane of the plasma at 10 mTorr and 20 mTorr of gas pressures, and 200 W and 300 W of RF powers. Data show that ne and ni decrease with increase of CF4 content and decrease of gas-pressure but they increase with increase of RF-power, whereas Vp increases with decrease of gas-pressure and remains independent of RF-power. However, they all peak at the center of the plasma and decrease towards the edge while Te follows the other way and increases a little with increase of power. The measured EEDFs exhibit Druyvesteyn-like distribution at all pressures and powers. Data are analyzed and will be presented.

Rao, M. V. V. S.↗

Interfacial Momentum Matching for Ohmic Van Der Waals Contact Construction

The difficulty of achieving ohmic contacts is a long-standing challenge for the development and integration of devices based on 2D materials, due to the large mismatch between their electronic properties and those of both traditional metal-based and van der Waals (vdWs) electrodes. Research has focused primarily on the electronic energy band alignment, while the effects of momentum mismatch on carrier transport across the vdWs gaps are largely neglected. Graphene-silicon junctions are utilized to demonstrate that electron momentum distribution can dominate the electronic properties of vdWs contacts. By judiciously introducing scattering centers at the interface that provide additional momentum to compensate the momentum mismatch, the junction conductivity is enhanced by more than three orders of magnitude, enabling the formation of high-quality ohmic contacts. The study establishes the framework for the design of high-performance ohmic vdWs contacts based on both energy and momentum matching, which can facilitate efficient heterogeneous integration of 2D–3D systems and the development of post-CMOS architectures.

2D-3D integration↗