Search NASA⌕ Search

SEARCH · Search NASA

Results for “facility development”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,639 records · Page 91

Update on developments at SNIF

The Small Negative Ion Facility (SNIF) at CCFE has been undergoing continuous development and enhancement to both improve operational reliability and increase diagnostic capability. SNIF uses a CW 13.56MHz, 5kW RF driven volume source with a 30kV triode accelerator. Improvement and characterisation work includes: Installation of a new “L” type RF matching unit, used to calculate the load on the RF generator. Use of the electron suppressing biased insert as a Langmuir probe under different beam extraction conditions. Measurement of the hydrogen Fulcher molecular spectrum, used to calculate gas temperature in the source. Beam optimisation through parameter scans, using copper target plate and visible cameras, with results compared with AXCEL-INP to provide beam current estimate. Modelling of the beam power density profile on the target plate using ANSYS to estimate beam power and provide another estimate of beam current. This work is described, and has allowed an estimation of the extracted beam current of approximately 6mA (4mA/cm2) at 3.5kW RF power and a source pressure of 0.6Pa.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Development of a Rayleigh Scattering Diagnostic for Time-Resolved Gas Flow Velocity, Temperature, and Density Measurements in Aerodynamic Test Facilities

A molecular Rayleigh scattering technique is developed to measure time-resolved gas velocity, temperature, and density in unseeded turbulent flows at sampling rates up to 32 kHz. A high power continuous-wave laser beam is focused at a point in an air flow field and Rayleigh scattered light is collected and fiber-optically transmitted to the spectral analysis and detection equipment. The spectrum of the light, which contains information about the temperature and velocity of the flow, is analyzed using a Fabry-Perot interferometer. Photomultiplier tubes operated in the photon counting mode allow high frequency sampling of the circular interference pattern to provide time-resolved flow property measurements. An acoustically driven nozzle flow is studied to validate velocity fluctuation measurements, and an asymmetric oscillating counterflow with unequal enthalpies is studied to validate the measurement of temperature fluctuations. Velocity fluctuations are compared with constant temperature anemometry measurements and temperature fluctuations are compared with constant current anemometry measurements at the same locations. Time-series and power spectra of the temperature and velocity measurements are presented. A numerical simulation of the light scattering and detection process was developed and compared with experimental data for future use as an experiment design tool.

Mielke, Amy F.↗

Plant model of KIPT neutron source facility simulator

Argonne National Laboratory (ANL) of the United States and Kharkov Institute of Physics and Technology (KIPT) of Ukraine are collaborating on constructing a neutron source facility at KIPT, Kharkov, Ukraine. The facility has 100-kW electron beam driving a subcritical assembly (SCA). The electron beam interacts with a natural uranium target or a tungsten target to generate neutrons, and deposits its power in the target zone. The total fission power generated in SCA is about 300 kW. Two primary cooling loops are designed to remove 100-kW and 300-kW from the target zone and the SCA, respectively. A secondary cooling system is coupled with the primary cooling system to dispose of the generated heat outside the facility buildings to the atmosphere. In addition, the electron accelerator has a low efficiency for generating the electron beam, which uses another secondary cooling loop to remove the generated heat from the accelerator primary cooling loop. One of the main functions the KIPT neutron source facility is to train young nuclear specialists; therefore, ANL has developed the KIPT Neutron Source Facility Simulator for this function. In this simulator, a Plant Control System and a Plant Protection System were developed to perform proper control and to provide automatic protection against unsafe and improper operation of the facility during the steady-state and the transient states using a facility plant model. This report focuses on describing the physics of the plant model and provides several test cases to demonstrate its capabilities. The plant facility model uses the PYTHON script language. It is consistent with the computer language of the plant control system. It is easy to integrate with the simulator without an additional interface, and it is able to simulate the transients of the cooling systems with system control variables changing on real-time.

43 PARTICLE ACCELERATORS↗

Development of the Orion Life-Support Integration Facility (OLIF)

Testing the life support hardware of a vehicle that is going to take humans beyond low-Earth orbit (LEO) in conditions similar to space is crucial. The Orion Life-Support Integration Facility (OLIF) at NASA Johnson Space Center (JSC) was designed and built to test the Orion vehicle’s hardware and software as integrated systems to provide a complete Environmental Control and Life Support System (ECLSS) system-level qualification. The existing 11 Foot human rated vacuum chamber has been adapted to accommodate and integrate various qualification and flight like components of the Orion vehicle’s Air Revitalization System (ARS), Pressure Control System (PCS), Active Thermal Control System (ATCS) and the Orion Crew Survival System Suits (OCSS). The ultimate goal was to create an analog testbed that could safely support up to four test subjects in open “shirt-sleeve” or closed suit loop configurations and simulate Orion Cabin conditions. This integrated hardware/software ARS and PCS will help identify any technical issues that should be addressed prior to the Artemis-2 mission. This paper will discuss the history of Orion ECLSS hardware development testing in the 11 Foot Chamber, the challenge of integrating flight hardware and software control systems, and the capabilities that make it a unique, world class facility for NASA. It will provide an overview of past and future testing, and the lessons learned along the way.

Peter A Masi↗

Subscale maturation of advanced reactor technologies (SMART): A path forward for nuclear thermal propulsion fuel and reactor development

Nuclear Thermal Propulsion (NTP) systems are actively being developed for future crewed missions to Mars. NTP systems excel in missions where both high thrust and high specific impulse are required, but modern NTP systems currently do not have a Technology Readiness Level (TRL) high enough for use in crewed space exploration. TRLs are used to demonstrate the level of rigor with which a component/system has been tested/demonstrated for its intended use. While space systems technology in general must be qualified as a unit, nuclear technology must be first demonstrated to meet qualification level requirements both at the fuel (component) level and the reactor (subsystem) level. Here, in this paper, historic NTP development programs are surveyed to identify a testing and development strategy that can be effectively implemented to allow for NTP reactor development. Based on this strategy, required facilities to enable such activities are identified. Current domestic experimental capabilities to support NTP qualification are limited to separate effects testing of individual components. Separate effects testing is found extensively in historic NTP development efforts but is not sufficient for full fuel and reactor qualification. Combined effects testing allows for an accurate assessment of fuel performance but is not achievable for NTP conditions in existing facilities. Assessment of historic development programs suggests that an intermediate, subscale test facility is necessary to advance NTP TRLs. A solution to meet this need is proposed, namely the Subscale Maturation of Advanced Reactor Technologies (SMART) facility. SMART will mitigate risk to NTP development by enabling performance and reactor physics demonstrations of NTP subsystems. A SMART facility could be built by modifying existing nuclear test facilities, which may potentially enable schedule and cost savings. To pursue reactor qualification beyond the subscale, a new ground test facility will be necessary. This ground test facility should be developed concurrently with SMART to allow for the facility to be operational in time for expedited NTP engine demonstration.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Updated Liquid Secondary Waste Grout Formulation and Preliminary Waste Form Qualification

This report describes the results from liquid secondary waste grout (LSWG) formulation and cementitious waste form qualification tests performed by Pacific Northwest National Laboratory (PNNL) for Washington River Protection Solutions, LLC (WRPS). New formulations for preparing a cementitious waste form from a high-sulfate liquid secondary waste stream simulant, developed for Effluent Management Facility (EMF) process condensates merged with low activity waste (LAW) caustic scrubber, and the release of key constituents (e.g. 99Tc and 129I) from these monoliths were evaluated. This work supports a technology development program to address the technology needs for Hanford Site Effluent Treatment Facility (ETF) liquid secondary waste (LSW) solidification and supports future Direct Feed Low-Activity Waste (DFLAW) operations. High-priority activities included simulant development, LSWG formulation, and waste form qualification. The work contained within this report relates to waste form development and testing and does not directly support the 2017 integrated disposal facility (IDF) performance assessment (PA). However, this work contains valuable information for use in PA maintenance past FY17, and for future waste form development efforts. The provided data should be used by (i) cementitious waste form scientists to further understanding of cementitious dissolution behavior, (ii) IDF PA modelers who use quantified constituent leachability, effective diffusivity, and partitioning coefficients to advance PA modeling efforts, and (iii) the U.S. Department of Energy (DOE) contractors and decision makers as they assess the IDF PA program. The results obtained help fill existing data gaps, support final selection of a LSWG waste form, and improve the technical defensibility of long-term waste form performance estimates.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

HPC Resource Allocation Under Energy Constraints

We discuss the new problem faced by High-Performance Computing (HPC) facilities in allocating resources to users of their facilities: while facilities once allocated a single finite resource—node-hours—now facilities must also concurrently allocate a second scarce resource: electrical energy, which is bounded within each facility's annual operations budget. Current application optimization practices encourage conservation of the first resource, but can be potentially unaffordably wasteful of the second. We describe a framework for reasoning about such allocations that can be utilized by facilities to articulate policy, while encouraging scientific application developers to write code mindfully of both constraints. We outline the requirements on facilities, on developers, and on hardware vendors and integrators that are necessary to enable the implementation of this framework.

97 MATHEMATICS AND COMPUTING↗

Tunable solid-state laser technology for applications to scientific and technological experiments from space

Current plans for the Earth Observing System (EOS) include development of a lidar facility to conduct scientific experiments from a polar orbiting platforms. A recommended set of experiments were scoped, which includes techniques of atmospheric backscatter (Lidar), Differential Absorption Lidar (DIAL), altimetry, and retroranging. Preliminary assessments of the resources (power, weight, volume) required by the Eos Lidar Facility were conducted. A research program in tunable solid state laser technology was developed, which includes laser materials development, modeling and experiments on the physics of solid state laser materials, and development of solid state laser transmitters with a strong focus on Eos scientific investigations. Some of the system studies that were conducted which highlight the payoff of solid state laser technology for the Eos scientific investigations will be discussed. Additionally, a summary of some promising research results which have recently emerged from the research program will be presented.

Allario, F.↗

Evolution of the Space Shuttle Primary Avionics Software and Avionics for Shuttle Derived Launch Vehicles

As a result of recommendation from the Augustine Panel, the direction for Human Space Flight has been altered from the original plan referred to as Constellation. NASA s Human Exploration Framework Team (HEFT) proposes the use of a Shuttle Derived Heavy Lift Launch Vehicle (SDLV) and an Orion derived spacecraft (salvaged from Constellation) to support a new flexible direction for space exploration. The SDLV must be developed within an environment of a constrained budget and a preferred fast development schedule. Thus, it has been proposed to utilize existing assets from the Shuttle Program to speed development at a lower cost. These existing assets should not only include structures such as external tanks or solid rockets, but also the Flight Software which has traditionally been a "long pole" in new development efforts. The avionics and software for the Space Shuttle was primarily developed in the 70 s and considered state of the art for that time. As one may argue that the existing avionics and flight software may be too outdated to support the new SDLV effort, this is a fallacy if they can be evolved over time into a "modern avionics" platform. The technology may be outdated, but the avionics concepts and flight software algorithms are not. The reuse of existing avionics and software also allows for the reuse of development, verification, and operations facilities. The keyword is evolve in that these assets can support the fast development of such a vehicle, but then be gradually evolved over time towards more modern platforms as budget and schedule permits. The "gold" of the flight software is the "control loop" algorithms of the vehicle. This is the Guidance, Navigation, and Control (GNC) software algorithms. This software is typically the most expensive to develop, test, and verify. Thus, the approach is to preserve the GNC flight software, while first evolving the supporting software (such as Command and Data Handling, Caution and Warning, Telemetry, etc.). This can be accomplished by gradually removing the "support software" from the legacy flight software leaving only the GNC algorithms. The "support software" could be re-developed for modern platforms, while leaving the GNC algorithms to execute on technology compatible with the legacy system. It is also possible to package the GNC algorithms into an emulated version of the original computer (via Field Programmable Gate Arrays or FPGAs), thus becoming a "GNC on a Chip" solution where it could live forever to be embedded in modern avionics platforms.

Ferguson, Roscoe C.↗

An Ocean World in a Laboratory

Ocean Worlds are planetary bodies, which contain a substantial amount of water, in the form of surface or sub-surface oceans. Within our Solar System, Jupiter’s moons Europa, Ganymede, and Callisto; Saturn’s moons Titan and Enceladus; Neptune’s moon Triton and Pluto have been identified as potential Ocean Worlds [1]. The conditions on these Ocean Worlds vary greatly, including extreme environments. In the search for biosignatures, one needs to take these conditions into consideration. For example, the surfaces of Europa and Enceladus are continuously bombarded by high energy radiation [2,3,4]. Laboratory facilities are needed to mimic these environments. This presentation details the design and development of a new facility, ICEE (In-situ Carbon Evolution Experiments), for just such studies.

P K Najeeb↗

Uncertainty Quantification by Monte Carlo Analysis using CFD Simulations for GEMIX Benchmark Activities

Uncertainty quantification (UQ) methods can be applied to computational fluid dynamics (CFD) simulations for determining the uncertainty bands of the simulations results. In order to determine the applicability of these different methods, simple benchmark activities have been conducted by various group for comparison. The GEMIX (Generic Mixing experiment) test facility was used to develop benchmark data for this purpose by the Paul Scherrer Institute (PSI). The facility involves the mixing of two fluids that are initially separated. One of the two fluids is water with sugar dissolved in it to create a fluid with similar fluid properties to water, except for density. The other fluid was distilled water to reduce the uncertainty in the fluid's properties. During the experiments, velocity fields and concentration measurements were acquired at several planes of interest. The velocity fields were acquired using particle image velocimetry (PIV) and concentrations of each fluid were acquired using laser induced fluorescence (LIF). The inlet velocity profiles were acquired using laser Doppler velocimetry (LDV). The activity provided the opportunity to vary turbulence models, meshing methodologies, and numerical schemes for creation of uncertainty estimates. The present study investigates the usage of a simple Monte Carlo (MC) technique for varying the inlet boundary conditions of each inlet. The velocity profiles and densities of each inlet were specifically varied based on experiment measurement uncertainty. The intent was to isolate the uncertainty due to inlet quantities and not related to meshing, numerical scheme, or turbulence models. The comparisons of experimental and simulation results were found to be reasonably accurate. Though deficiencies were identified in the modeling approach to be corrected in future works by the authors. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Target Design Optimization of KIPT Neutron Source Facility

Argonne National Laboratory (ANL) of the United States developed and designed a neutron source facility for Kharkov Institute of Physics and Technology (KIPT) of Ukraine. The facility was constructed at Kharkov, Ukraine and its commissioning process has been started. The facility has an electron accelerator driving a subcritical assembly. The electron beam power is 100 kW using 100 MeV electrons. The subcritical assembly has WWR-M2 fuel assemblies with U-235 enrichment of 19.7 wt%. The facility will be utilized to perform basic and applied nuclear research, to produce medical isotopes, and to train young nuclear specialists. Solid target design with stacked disks is selected and each target disk is cooled by water from both side. Tungsten or natural uranium is the target material. This paper presents the target design optimization to maximize the neutron yield and the neutron flux level of the facility while satisfying the thermal-hydraulic design criteria. Monte Carlo computer code MCNPX is utilized for the neutron yield analyses with ENDF/B-VII.0 nuclear data libraries, as a function of target thickness using a simplified target model without cladding or coolant channels. It’s found that the neutron yield saturates at target thickness 60 ~ 70 mm for both tungsten and uranium materials. For the final target design with cladding and coolant channels, the total uranium thickness is 56.5 mm, and the total tungsten thickness is only 33.0 mm. The tungsten material has a large absorption cross section for thermal neutrons. If the tungsten thickness is increased, the neutron yield gain is offset by the neutron absorption reaction. The paper presents the design optimization analyses for both target materials.

electron accelerator↗

Updated Liquid Secondary Waste Grout Formulation and Preliminary Waste Form Qualification

This report describes the results from liquid secondary waste grout (LSWG) formulation and cementitious waste form qualification tests performed by Pacific Northwest National Laboratory (PNNL) for Washington River Protection Solutions, LLC (WRPS). New formulations for preparing a cementitious waste form from a high-sulfate liquid secondary waste stream simulant, developed for Effluent Management Facility (EMF) process condensates merged with low activity waste (LAW) caustic scrubber, and the release of key constituents (e.g. 99 Tc and 129 I) from these monoliths were evaluated. This work supports a technology development program to address the technology needs for Hanford Site Effluent Treatment Facility (ETF) liquid secondary waste (LSW) solidification and supports future Direct Feed Low-Activity Waste (DFLAW) operations. High-priority activities included simulant development, LSWG formulation, and waste form qualification. The work contained within this report relates to waste form development and testing and does not directly support the 2017 integrated disposal facility (IDF) performance assessment (PA). However, this work contains valuable information for use in PA maintenance past FY17, and for future waste form development efforts. The provided data should be used by (i) cementitious waste form scientists to further understanding of cementitious dissolution behavior, (ii) IDF PA modelers who use quantified constituent leachability, effective diffusivity, and partitioning coefficients to advance PA modeling efforts, and (iii) the U.S. Department of Energy (DOE) contractors and decision makers as they assess the IDF PA program. The results obtained help fill existing data gaps, support final selection of a LSWG waste form, and improve the technical defensibility of long-term waste form performance estimates.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Long Term Environment and Economic Impacts of Coal Liquefaction in China

The project currently is composed of six specific tasks – three research tasks, two outreach and training tasks, and one project management and communications task. Task 1 addresses project management and communication. Research activities focused on Task 2 (Describe and Quantify the Economic Impacts and Implications of the Development and Deployment of Coal-to-Liquid Facilities in China), Task 3 (Development of Alternative Coal Gasification Database), and Task 4 (Geologic Carbon Management Options). There also were significant activities related to Task 5 (US-China Communication, Collaboration, and Training on Clean Coal Technologies) as well as planning activity performed in support of Task 6 (Training Programs).

01 COAL, LIGNITE, AND PEAT↗

Transition Flight Control Room Automation

The Workstation Prototype Laboratory is currently working on a number of projects which we feel can have a direct impact on ground operations automation. These projects include: The Fuel Cell Monitoring System (FCMS), which will monitor and detect problems with the fuel cells on the Shuttle. FCMS will use a combination of rules (forward/backward) and multi-threaded procedures which run concurrently with the rules, to implement the malfunction algorithms of the EGIL flight controllers. The combination of rule based reasoning and procedural reasoning allows us to more easily map the malfunction algorithms into a real-time system implementation. A graphical computation language (AGCOMPL). AGCOMPL is an experimental prototype to determine the benefits and drawbacks of using a graphical language to design computations (algorithms) to work on Shuttle or Space Station telemetry and trajectory data. The design of a system which will allow a model of an electrical system, including telemetry sensors, to be configured on the screen graphically using previously defined electrical icons. This electrical model would then be used to generate rules and procedures for detecting malfunctions in the electrical components of the model. A generic message management (GMM) system. GMM is being designed as a message management system for real-time applications which send advisory messages to a user. The primary purpose of GMM is to reduce the risk of overloading a user with information when multiple failures occurs and in assisting the developer in devising an explanation facility. The emphasis of our work is to develop practical tools and techniques, while determining the feasibility of a given approach, including identification of appropriate software tools to support research, application and tool building activities.

Welborn, Curtis Ray↗

Towards a data-centric research and development roadmap for large-scale science user facilities

© 2017 IEEE. The U.S. Department of Energy (DOE) Office of Science (SC) operates approximately four dozen large-scale science user facilities (SUFs), each of which generates a tremendous amount of scientific data from experiments, observations and computations. To better understand the data needs and challenges, DOE has run many workshops in recent years to identify and articulate data-centric challenges and opportunities at varying resolution, from facility to community scale. Building on those workshop reports, as well as others from elsewhere in the community, this article goes beyond the findings-recommendations typical of workshop reports to consider how one might structure a broad, technology- and data-centric, coordinated research effort that would realize progress towards solutions that address the well documented challenges and opportunities. We focus on identifying practical issues of strategic relevance, along with offering a view about the focal points for a coordinated research and development effort that would target meeting data-centric needs of a broad set of science users and SUFs. These focal points would, by their nature, engage a spectrum of researchers from computer science, computational and experimental sciences, and data science in a coordinated fashion.

Bethel, EW↗

Development of Modeling Approaches for Nuclear Thermal Propulsion Test Facilities

High efficiency of rocket propul-sion systems is essential for humanity to venture be-yond the moon. Nuclear Thermal Propulsion (NTP) is a promising alternative to conventional chemical rock-ets with relatively high thrust and twice the efficiency of the Space Shuttle Main Engine. NASA is in the pro-cess of developing a new NTP engine, and is evaluat-ing ground test facility concepts that allow for the thor-ough testing of NTP devices. NTP engine exhaust, hot gaseous hydrogen, is nominally expected to be free of radioactive byproducts from the nuclear reactor; how-ever, it has the potential to be contaminated due to off-nominal engine reactor performance. Several options are being investigated to mitigate this hazard potential with one option in particular that completely contains the engine exhaust during engine test operations. The exhaust products are subsequently disposed of between engine tests. For this concept (see Figure 1), oxygen is injected into the high-temperature hydrogen exhaust that reacts to produce steam, excess oxygen and any trace amounts of radioactive noble gases released by off-nominal NTP engine reactor performance. Water is injected to condense the potentially contaminated steam into water. This water and the gaseous oxygen (GO2) are subsequently passed to a containment area where the water and GO2 are separated into separate containment tanks.

Jones, Daniel R.↗

The Legislative and Regulatory Histories Related to Greater-Than-Class-C Low-Level Radioactive Waste - 18602

The history surrounding the legislative and regulatory developments regarding Greater-Than-Class C Low Level Radioactive Waste (GTCC LLW) is both interesting and complex. On October 25, 1978, the U.S. Nuclear Regulatory Commission (NRC) published an Advanced Notice of Proposed Rulemaking pertaining to the development of regulations for the land disposal of LLW. This regulation was one of the first undertaken by NRC since its inception pursuant to the Energy Reorganization Act of 1974. Given the problematic challenges that many States were facing with releases of radioactivity from waste disposal facilities at the time, the technical bases supporting this rulemaking were both forward-thinking and comprehensive. The rule included a waste classification system that was tiered in four waste classes: Class A, B, C and GTCC LLW. On December 27, 1982, the NRC finalized the requirements for disposing of these classes of radioactive waste in Title 10 of the Code of Federal Regulations, Part 61 (10 CFR 61). The NRC established the waste classification system to protect both members of the public and individuals that may someday inadvertently intrude in the waste placed in the disposal facility after expiration of the institutional control period. This waste classification was developed to ensure that radiation doses to members of the public and an inadvertent intruder would not exceed 0.25 mSv y{sup -1} (25 mrem y{sup -1}) or 5.0 mSv y{sup -1} (500 mrem y{sup -1}), respectively. At the time the regulation was promulgated, GTCC LLW was considered generally not suitable for near surface disposal. It was recognized that disposal of GTCC LLW would require disposal technologies having greater confinement capacity or protection than 'normal' near-surface disposal. In 1980 Congress enacted the Low-Level Waste Policy Act of 1980, as amended in 1985 (LLWPAA of 1985) that assigned responsibility of disposing of GTCC LLW generated in the commercial sector or owned or generated by the federal government to the U.S. Department of Energy (DOE). At the time States were having difficulties in developing disposal facilities within the time constraints mandated in the LLWPA of 1980. Therefore, Congress believed that if DOE was assigned responsibility of developing disposal facilities for GTCC LLW, then the States would be more likely to develop new LLW disposal facilities. Congress also assigned the NRC with the responsibility to license the disposal of GTCC LLW generated or owned by the federal government or by the commercial sector. Lastly, Congress changed the definition of LLW that had been defined in the LLWPA of 1980 removing the 'transuranic' exclusionary language. Four years later, on May 25, 1989, the NRC promulgated its regulation needed to implement the mandates specified in the LLWPAA of 1985. The NRC revised 10 CFR 61.55 specifying that the NRC was responsible for licensing the disposal of GTCC LLW. However, it inadvertently did not revise the definition of LLW needed to remove the 'transuranic' exclusionary language in this rulemaking consistent with the LLWPAA of 1985. This seemingly inconsequential omission was not discovered until a Petition for Rulemaking was filed in Texas in July 2014. Moreover, this omission has effectively orphaned waste with certain transuranic radionuclides with concentrations exceeding 100 nanocuries per gram (100 nCi/g). In December 2015, the NRC Commissioners directed its staff to move forward with a rulemaking to resolve this issue and to perform a regulatory analysis to determine whether or not an Agreement State can license the disposal of GTCC LLW pursuant to Section 274 of the Atomic Energy Act of 1954. The paper will discuss past and current legislation, rulemaking, and regulatory developments pertaining to resolving the transuranic waste discrepancy and providing a pathway to disposition GTCC LLW. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗