Search NASA⌕ Search

SEARCH · Search NASA

Results for “formative process”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,639 records · Page 91

Simulating Droplet-Resolved Haze and Cloud Chemistry Forming Secondary Organic Aerosols in Turbulent Conditions within Laboratory and Cloud Parcels

Most of our existing knowledge of cloud chemistry in regards to forming secondary organic aerosols (SOA) is based on measurements in bulk aqueous solutions. However, SOA reaction kinetics derived from bulk solution measurements might differ from the kinetics in actual cloud droplets, since turbulent mixing and ionic strengths, and ratio of surface area to volume in individual cloud droplets might vary substantially from bulk solutions in the real atmosphere. Three-dimensional models at various scales have been used to simulate aqueous chemistry. However, most of these models do not resolve turbulence down to the smallest length scales of 1 mm and do not simulate cloud chemistry in individual cloud droplets due to large computational costs. Here we incorporate the formation of isoprene epoxydiol SOA (IEPOX-SOA) in individual droplets within a one-dimensional explicit mixing parcel model (EMPM-Chem). We apply EMPM-Chem to simulate turbulence and droplet-resolved IEPOX-SOA formation using a configuration based on the Michigan Tech Pi chamber. We find that the dissolution of IEPOX gases is weighted more towards larger cloud droplets due to their large liquid water content (compared to smaller droplets), while the conversion of dissolved IEPOX to IEPOX-SOA is much greater within smaller deliquesced haze particles due to their higher acidity and ionic strengths compared to cloud droplets. We also find that as droplet residence times increase in the chamber, e.g., due to increasing ammonium bisulfate seed aerosol injection rates and/or increasing heights of the chamber, formation of IEPOX-SOA increases substantially. Thus, our EMPM-Chem model could be used to design future cloud chambers to maximize SOA production from cloud chemistry. We also apply the EMPM-Chem model to simulate how IEPOX-SOA formation evolves in individual cloud droplets within rising cloudy parcels in the atmosphere. We find that as subsaturated air is entrained into and turbulently mixed with the cloud parcel, evaporation causes a reduction in droplet sizes, which leads to corresponding increases in per droplet ionic strength and acidity. Increased droplet acidity in turn greatly accelerates the kinetics of IEPOX-SOA formation. In conclusion, our results provide key insights into single-cloud-droplet chemistry, suggesting that entrainment mixing may be an important process that increases SOA formation in the real atmosphere.

54 ENVIRONMENTAL SCIENCES↗

SPHERICAL RESORCINOL-FORMALDEHYDE PERFORMANCE TESTING WITH HANFORD TANK WASTE

The efficacy of a new spherically engineered form of resorcinol-formaldehyde (RF) resin was tested for cesium removal on two actual Hanford tank wastes. Small-scale processing was conducted according to the River Protection Project-Waste Treatment and Immobilization Plant flowsheet in a lead-lag column format. The RF resin processed 95 bed volumes (BVs) of high potassium-bearing waste (AP-101) and >200 BVs of a high complexant-bearing waste (AN-102) before reaching 50% cesium breakthrough. Elution with 0.5 M nitric acid was effective and complete after processing 16 BVs. Cesium and other analyte fractionations to the process stream effluent and eluate were evaluated. The RF resin resulted in very little metal and radionuclide fractionation, other than cesium, to the eluate. The spent resins were measured for most analytes relevant to land-disposal requirements. The actinide concentrations on the spent resins were <3% of the transuranic waste limit; the residual cesium concentrations were <4 mCi/kg; chromium was the only metal, regulated by the Resource Conservation Recovery Act, that was measured in quantities significant to land-disposal regulations.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Propene Metathesis over Supported Tungsten Oxide Catalysts: A Study of Active Site Formation

A detailed investigation was conducted on the factors influencing the properties of silica-supported tungsten oxide catalysts for propene metathesis. A principal goal of this work was to identify the processes involved in the formation of catalytically active sites. To probe the influence of dispersion, samples were prepared across a range of W loadings using two methods of catalyst preparation: incipient wetness impregnation of amorphous silica and ion exchange of mesoporous SBA-15. The samples were characterized by nitrogen adsorption, UV-vis, Raman, and X-ray absorption spectroscopy (XAS). Catalytic activity was observed to increase with W surface concentration up to the point where WO 3 nanoparticles formed. The catalytic performance of all samples was enhanced 2-fold by pretreatment in He, in comparison to pretreatment in air. In situ characterization of samples pretreated in He by Raman and XAS shows an increase in the relative concentration of isolated dioxo W(6+) species relative to mono-oxo W(6+) species, and in situ XAS data collected during propene metathesis indicated that a similar conversion occurs for air-pretreated samples in the presence of propene. For both air- and He-pretreated catalysts an activation period was observed, during which the activity increased and attained steady-state activity. This period was significantly longer for air-pretreated catalysts and was accompanied by the transient formation of acetone. While acetone was not observed during the much shorter transient of He-pretreated samples, in situ XAS provided evidence of reduction occurring in these samples upon contact with propene. In conclusion, it is also notable that, independent of the manner of catalyst preparation or pretreatment, the rate of propene metathesis is first order in propene and exhibits an activation energy of 200 kJ/mol. A model is proposed to explain why only a fraction of the isolated tungstate species is active for propene metathesis (~5%) and why this fraction increases with increasing concentration of W dispersed on silica.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Reaction of amorphous/crystalline SiOC/Fe interfaces by thermal annealing

The development of revolutionary new alloys and composites is crucial to meeting materials requirements for next generation nuclear reactors. The newly developed amorphous silicon oxycarbide (SiOC) and crystalline Fe composite system has shown radiation tolerance over a wide range of temperatures. To advance understanding of this new composite, we investigate the structure and thermal stability of the interface between amorphous SiOC and crystalline Fe by combining various experimental techniques and simulation methods. We show that the SiOC/Fe interface is thermally stable up to at least 400 °C. When the annealing temperature reaches 600 °C, an intermixed region forms at this interface. This region appears to be a crystalline phase that forms an incoherent interface with the Fe layer. Density functional theory (DFT) Molecular dynamics (MD) is performed on the homogeneous SiFeOC phase to study the early stages of 2 formation of the intermixed layer. Both experimental and simulation results suggest this phase has the fayalite crystal structure. As a result, the physical processes involved in the formation of the intermixed region are discussed.

36 MATERIALS SCIENCE↗

Data for Post-Access Report: Tidal Energy Resource Characterization and Model Validation via the Assessment of Cost-effective Spatially Distributed Current Measurements from microFloat Swarms

This project evaluated how high-resolution, spatially distributed field data can be used to refine and validate site-scale hydrodynamic simulations of tidal channels. Use of such spatially-distributed field observations or site-scale hydrodynamic simulations will be needed for producing accurate predictions of tidal energy production over larger arrays of tidal turbines. The data contained in this archive includes field observations of water velocity from a series of short surveys in Agate Pass taken on August 20th, 2020 using station-keeping ADCP (acoustic doppler current profiler) measurements, drifting downward-looking ADCPs, and microFloats, gathered by researchers at APL-UW under a previous project. It also includes high-resolution hydrodynamic model runs for the site during that time generated under TEAMER support. An explanatory file (.pdf format) describes the survey and field data structure. Processed data is stored in .mat format. Survey summary: start time, number of floats, water level. microFloat data: - Cleaned data for each float in survey, - Time series of position (lat., lon.), depth (relative to surface), and horizontal velocity (u, v) Drifting ADCP data: - Cleaned data for each drifting ADCP in survey - Time series of position (lat., lon.), sample depth (relative to surface), and observed water velocity (u,v,w) Stationary ADCP data: - Cleaned data for each station-keeping data set in survey - Time series of position (lat., lon.), sample depth (relative to surface), and observed water velocity (u,v,w) FVCOM (Finite Volume Coastal Ocean Model) model outputs: Water level and velocity, as well as derived variables (e.g., power density) from the final refined model simulations for the Agate Pass subdomain. Contained in NetCDF and ASCII files for the duration of August 18th and 20th 2020 field surveys. Additional scripts for processing the data and generating the figures in the report are included.

16 TIDAL AND WAVE POWER↗

Pressure-induced excimer formation and fluorescence enhancement of an anthracene derivative

Excimer materials have been widely studied and have generated significant interest for their applications in many optoelectronic devices. However, a thorough investigation of the entire process involved in excimer formation, enhancement, and annihilation in solid materials is still lacking. Here we designed a crystal based on an anthracene derivative with dissociative, molecular-ordered dimer assembly, and studied the formation and evolution of an anthracene excimer as a function of pressure. During the initial stage of pressurization, the fluorescence intensity arising from anthracene monomers gradually decreases. Therefore, with continued compression, the two anthracene units become increasingly closer allowing strong intermolecular π–π interactions to develop that lead to excimer formation at 3.5 GPa, accompanied with a phase transition. The fluorescence intensity then keeps increasing with pressure and reaches its maximum at 5.6 GPa due to the strengthening of the excimer and the increased structural defects. Meanwhile the fluorescence color shows a continuous redshift, which initially results from conformation planarization and then excimer evolution. After releasing pressure back to ambient conditions, the structural changes in the sample are reversible, while the fluorescence signal preserves some high-pressure features due to the partial retention of the π–π interactions between the anthracene dimers. This study reveals the evolution of an excimer and its intrinsic photophysical properties, and provides guidance for future research on pressure-sensitive fluorescent devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Flash Graphene from Plastic Waste

In this work, an approach to upcycling plastic waste (PW) products is presented. The method relies on flash Joule heating (FJH) to convert PW into flash graphene (FG). In addition to FG, the process results in the formation of carbon oligomers, hydrogen, and light hydrocarbons. In order to make high quality graphene, a sequential alternating current (AC) and direct current (DC) flash is used. Here, the FJH process requires no catalyst and works for PW mixtures, which makes the process suitable for handling landfill PW. The energy required to convert PW to FG is ~ 23 kJ/g or ~ $125 in electricity per ton of PW, potentially making this process economically attractive for scale-up. The FG was characterized by Raman spectroscopy and had a I 2D /I G peak ratio up to 6 with a low-intensity D band. Moreover, transmission electron microscopy and X-ray diffraction analysis show that the FG is turbostratic with an interlayer spacing of 3.45 Å. The large interlayer spacing will facilitate its dispersion in liquids and composites. Analysis of FG dispersions in 1% Pluronic aqueous solution shows that concentrations up to 1.2 mg/mL can be achieved. The carbon oligomers that distilled from the process were characterized by Fourier-transform infrared spectroscopy and have chemical structures similar to the starting PW. Initial analysis of gas phase products shows the formation of considerable amounts of hydrogen along with other light hydrocarbons. Since graphene is naturally occurring and it shows a low toxicity profile, this could be an environmentally beneficial method to upcycle PE.

54 ENVIRONMENTAL SCIENCES↗

Periodic domain patterning by electron beam of proton exchanged waveguides in lithium niobate

Formation of domain structure by electron beam irradiation in congruent lithium niobate covered by surface dielectric layer with planar and channel waveguides produced by Soft Proton Exchange (SPE) process has been studied. Formation of domains with arbitrary shapes as a result of discrete switching has been revealed. The fact was attributed to ineffective screening of depolarization field in the crystals with a surface layer modified by SPE process. The dependences of the domain sizes on the dose and the distance between irradiated areas have been revealed. Finally, we have demonstrated that electron beam irradiation of lithium niobate crystals with surface resist layer can produce high quality periodical domain patterns after channel waveguide fabrication. Second harmonic generation with normalized nonlinear conversion efficiency up to 48%/(W cm{sup 2}) has been achieved in such waveguides.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Linear and Nonlinear Solvers for Simulating Multiphase Flow within Large-Scale Engineered Subsurface Systems

Simulation of multiphase flow in the subsurface is well-known to be computationally challenging. While there have been many studies that have explored approaches to overcoming these challenges, they often utilize relatively simple case studies. In this paper, we focus on the unique numerical challenges posed by modeling large-scale engineered subsurface systems, characterized by discrete features embedded in a heterogeneous natural subsurface setting. The man-made features such as shafts, tunnels, and barriers often cause multiple challenges in modeling the domain for multiphase porous media flow. This flow scenario can have a wide range of applications such as nuclear waste repositories, enhanced recovery of a petroleum reservoir, geothermal engineering, and carbon sequestration. An example of these severe numerical challenges is the case of performance assessment (PA) for Waste Isolation Pilot Plant (WIPP), the only operating deep geological repository in the US, which simulates extreme material properties of bedded salt rock formation and extreme contrast due to open excavation next to the formation. The models have extremes not only of permeability and porosity but also of the constitutive models needed for multiphase flow; additionally, they have process models like salt creep closure reducing porosity over time, fracturing in clay and anhydrite interbeds of the bedded salt, gas generation from the waste materials, and unintentional human borehole intrusions in some scenarios. Numerical simulations require the solution of coupled systems of nonlinear PDEs; in our work, we use the open-source simulator PFLOTRAN which is based on Finite Volume discretization. The solution of the nonlinear equations requires use of the Newton-Raphson iteration at each time step, which entails the solution of the linearized Jacobian system at each iteration. The effects of all the processes (i.e., large number of unknowns, highly nonlinear constitutive relations, large contrasts in material properties in short distances) lead to an ill-conditioned Jacobian matrix that severely challenges traditional linear solver, i.e., stabilized biconjugate gradient with block Jacobi incomplete LU preconditioner (BCGS-ILU) leading to non-convergence for traditional Newton-Raphson nonlinear solver causing unacceptably long computation time for each model. This paper presents linear solvers such as constrained pressure residual (CPR) two-stage preconditioner with alternate-block-factorization (ABF) and quasi- implicit pressure and explicit saturation (QIMPES) decouplers and flexible generalized residual solver (FGMRES). The new general-purpose nonlinear solver, Newton trust-region dogleg Cauchy (NTRDC), is also introduced to resolve extreme nonlinearities in the models. We demonstrate the effectiveness of each method relative to the default BCGS-Newton solver. The two best cases had nearly 50 times speed-up and achieved completion of a simulation in 14 hours that never completed due to non-convergence with the default solver. We also investigate the strong scalability of each method and discuss some of the deficiencies found for Block Jacobi preconditioner using parallel domain decomposition, and node packing effects of modern processor architecture.

Preconditioner, Nonlinear, Porous media, Multiphas↗

The Roles of Convection Parameterization in the Formation of Double ITCZ Syndrome in the NCAR CESM: I. Atmospheric Processes

Abstract Several improvements are implemented in the Zhang‐McFarlane (ZM) convection scheme to investigate the roles of convection parameterization in the formation of double intertropical convergence zone (ITCZ) bias in the NCAR CESM1.2.1. It is shown that the prominent double ITCZ biases of precipitation, sea surface temperature (SST), and wind stress in the standard CESM1.2.1 are largely eliminated in all seasons with the use of these improvements in convection scheme. This study for the first time demonstrates that the modifications of convection scheme can eliminate the double ITCZ biases in all seasons, including boreal winter and spring. Further analysis shows that the elimination of the double ITCZ bias is achieved not by improving other possible contributors, such as stratus cloud bias off the west coast of South America and cloud/radiation biases over the Southern Ocean, but by modifying the convection scheme itself. This study demonstrates that convection scheme is the primary contributor to the double ITCZ bias in the CESM1.2.1, and provides a possible solution to the long‐standing double ITCZ problem. The atmospheric model simulations forced by observed SST show that the original ZM convection scheme tends to produce double ITCZ bias in high SST scenario, while the modified convection scheme does not. The impact of changes in each core component of convection scheme on the double ITCZ bias in atmospheric model is identified and further investigated.

54 ENVIRONMENTAL SCIENCES↗

On the interplay between star formation and feedback in galaxy formation simulations

We investigate the star formation–feedback cycle in cosmological galaxy formation simulations, focusing on the progenitors of Milky Way (MW)-sized galaxies. We find that in order to reproduce key properties of the MW progenitors, such as semi-empirically derived star formation histories (SFHs) and the shape of rotation curves, our implementation of star formation and stellar feedback requires (1) a combination of local early momentum feedback via radiation pressure and stellar winds, and subsequent efficient supernovae feedback, and (2) an efficacy of feedback that results in the self-regulation of the global star formation rate on kiloparsec scales. We show that such feedback-driven self-regulation is achieved globally for a local star formation efficiency per free fall time of ϵ{sub ff}≈10%. Although this value is larger that the ϵ{sub ff}∼1% value usually inferred from the Kennicutt–Schmidt (KS) relation, we show that it is consistent with direct observational estimates of ϵ{sub ff} in molecular clouds. Moreover, we show that simulations with local efficiency of ϵ{sub ff}≈10% reproduce the global observed KS relation. Such simulations also reproduce the cosmic SFH of the MW-sized galaxies and satisfy a number of other observational constraints. Conversely, we find that simulations that a priori assume an inefficient mode of star formation, instead of achieving it via stellar feedback regulation, fail to produce sufficiently vigorous outflows and do not reproduce observations. This illustrates the importance of understanding the complex interplay between star formation and feedback, and the detailed processes that contribute to the feedback-regulated formation of galaxies.

79 ASTRONOMY AND ASTROPHYSICS↗

KIVA Software

KIVA is a family of Fortran-based Computational Fluid Dynamics (CFD) software that predicts complex multi-species multi-phase turbulent fuel and air flows. KIVA models all engine combustion processes with models for spray, soot formation, spark ignition, and reactive chemistry (including pollutantformation processes). Employing KIVA software helps to optimize internal combustion engine processes, including diesel engines, for higher efficiency and lower emissions. KIVA engine modeling routines such as spray and core CFD Arbitrary Lagrangian-Eulerian (ALE) algorithms are now ubiquitous in the industry of engine code simulators. In addition, many engineers and researchers have made modifications to or enhanced our routines to address specific problems in engine designs.

20 FOSSIL-FUELED POWER PLANTS↗

Format requirements of thermal neutron scattering data in a nuclear data format to succeed the ENDF format

In November 2012, the Working Party on Evaluation Cooperation Subgroup 38 (WPEC-SG38) began with the task of developing a nuclear data format and supporting infrastructure to replace the now nearly 50 year old ENDF format. The first step in this process is to develop requirements for the new format and infrastructure. In this talk, I will review the status of ENDF's Thermal Scattering Law (TSL) formats as well as support for this data in the GND format (from which the new format is expected to evolve). Finally, I hope to begin a dialog with members of the thermal neutron scattering community so that their data needs can be accurately and easily accommodated by the new format and tools, as captured by the requirements document. During this discussion, we must keep in mind that the new tools and format must; Support what is in existing data files; Support new things we want to put in data files; and Be flexible enough for us to adapt it to future unanticipated challenges.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Bridging Land-Surface Fluxes and Aerosol Concentrations to Triggering Convective Rainfall

The goal of this project is to investigate yields and properties of aerosol resulting from the photooxidation of plant-emitted hydrocarbons in natural environments of the Amazonia and their potential influences on cloud formation. A combination of intensive and comprehensive field observations and numerical models at multiple scales is being used to investigate the physical and chemical processes relevant to the formation of cloud condensation nuclei (CCN). The final report resulted in 40 peer reviewed manuscripts (from the Duke University co-PI) partly completed in collaboration with the PI and other co-PIs.

54 ENVIRONMENTAL SCIENCES↗

Complex-Energy Shell-Model Description of Alpha Decay

In his pioneering work of alpha decay, Gamow assumed that the alpha particle formed inside the nucleus tunnels through the barrier of the alpha-daughter potential. The corresponding metastable state can be viewed as a complex-energy solution of the time-independent Schroedinger equation with the outgoing boundary condition. The formation of the alpha cluster, missing in the original Gamow formulation, can be described within the R-matrix theory in terms of the formation amplitude. In this work, the alpha decay process is described by computing the formation amplitude and barrier penetrability in a large complex-energy configuration space spanned by the complex-energy eigenstates of the finite Woods-Saxon (WS) potential. The proper normalization of the decay channel is essential as it strongly modifies the alpha-decay spectroscopic factor. The test calculations are carried out for the ^{212}Po alpha decay.

Alpha Decay↗

Thallium bromide (TIBr) semiconductors and devices with extended life apparatus, methods, and system

Various technologies pertaining to formation or treatment of a thallium bromide crystal to improve the operable lifespan of a device that incorporates the thallium bromide crystal are described herein. In exemplary embodiments, treatments including focused ion beam implantation, selective material removal, and buffer layer application are performed on a thallium bromide crystal to inhibit motion of dislocations toward a region at which an electrical contact is desirably installed. In other exemplary embodiments, a thallium bromide crystal is doped with impurities during formation that inhibit the motion of dislocations in the crystal. In still other exemplary embodiments, a thallium bromide crystal is formed by way of processes that inhibit dislocation formation during crystal growth or eliminate dislocations in an existing thallium bromide mass.

36 MATERIALS SCIENCE↗

Both starvation and outflows drive galaxy quenching

ABSTRACT Star-forming galaxies can in principle be transformed into passive systems by a multitude of processes that quench star formation, such as the halting of gas accretion (starvation) or the rapid removal of gas in AGN-driven outflows. However, it remains unclear which processes are the most significant, primary drivers of the SF-passive bimodality. We address this key issue in galaxy evolution by studying the chemical properties of 80 000 local galaxies in Sloan Digital Sky Survey Data Release 7. In order to distinguish between different quenching mechanisms, we analyse the stellar metallicities of star-forming, green valley, and passive galaxies. We find that the significant difference in stellar metallicity between passive galaxies and their star-forming progenitors implies that for galaxies at all masses, quenching must have involved an extended phase of starvation. However, some form of gas ejection also has to be introduced into our models to best match the observed properties of local passive galaxies, indicating that, while starvation is likely to be the prerequisite for quenching, it is the combination of starvation and outflows that is responsible for quenching the majority of galaxies. Closed-box models indicate that the duration of the quenching phase is 2–3 Gyr, with an e-folding time of 2–4 Gyr, after which further star formation is prevented by an ejective/heating mode. Alternatively, leaky-box models find a longer duration for the quenching phase of 5–7 Gyr and an e-folding time of ∼1 Gyr, with outflows becoming increasingly important with decreasing stellar mass. Finally, our analysis of local green valley galaxies indicates that quenching is slower in the local Universe than at high redshift.

Trussler, James↗