Search NASA⌕ Search

SEARCH · Search NASA

Results for “interactive model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,639 records · Page 91

Dynamic chirality in the interacting boson fermion-fermion model

The chiral interpretation of twin bands in odd-odd nuclei was investigated in the interacting boson fermion-fermion model. The analysis of the wave functions has shown that the possibility for angular momenta of the valence proton, neutron and core to find themselves in the favorable, almost orthogonal geometry is present, but not dominant. Such behavior is found to be similar in nuclei where both the level energies and the electromagnetic decay properties display the chiral pattern, as well as in those where only the level energies of the corresponding levels in the twin bands are close together. The difference in the structure of the two types of chiral candidates nuclei can be attributed to different {beta} and {gamma} fluctuations, induced by the exchange boson-fermion interaction of the interacting boson fermion-fermion model. In both cases the chirality is weak and dynamic.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Mass density fluctuations in quantum and classical descriptions of liquid water

First principles molecular dynamics simulation protocol is established using revised functional of Perdew-Burke-Ernzerhof (revPBE) in conjunction with Grimme's third generation of dispersion (D3) correction to describe properties of water at ambient conditions. This study also demonstrates the consistency of the structure of water across both isobaric (NpT) and isothermal (NVT) ensembles. Going beyond the standard structural benchmarks for liquid water, we compute properties that are connected to both local structure and mass density fluctuations that are related to concepts of solvation and hydrophobicity. Finally, we directly compare our revPBE results to the Becke-Lee-Yang-Parr (BLYP) plus Grimme dispersion corrections (D2) and both the empirical fixed charged model (SPC/E) and many body interaction potential model (MB-pol) to further our understanding of how the computed properties herein depend on the form of the interaction potential.

74 ATOMIC AND MOLECULAR PHYSICS↗

WRF-ELM v1.0: a regional climate model to study land–atmosphere interactions over heterogeneous land use regions

Abstract. The Energy Exascale Earth System Model (E3SM) Land Model (ELM) is a state-of-the-art land surface model that simulates the intricate interactions between the terrestrial land surface and other components of the Earth system. Originating from the Community Land Model (CLM) version 4.5, ELM has been under active development, with added new features and functionality, including plant hydraulics, radiation–topography interaction, subsurface multiphase flow, and more explicit land use and management practices. This study integrates ELM v2.1 with the Weather Research and Forecasting (WRF; WRF-ELM) model through a modified Lightweight Infrastructure for Land Atmosphere Coupling (LILAC) framework, enabling affordable high-resolution regional modeling by leveraging ELM's innovative features alongside WRF's diverse atmospheric parameterization options. This framework includes a top-level driver for variable communication between WRF and ELM and Earth System Modeling Framework (ESMF) caps for the WRF atmospheric component and ELM workflow control, encompassing initialization, execution, and finalization. Importantly, this LILAC–ESMF framework demonstrates a more modular approach compared to previous coupling efforts between WRF and land surface models. It maintains the integrity of ELM's source code structure and facilitates the transfer of future developments in ELM to WRF-ELM. To test the ability of the coupled model to capture land–atmosphere interactions over regions with a variety of land uses and land covers, we conducted high-resolution (4 km) WRF-ELM ensemble simulations over the Great Lakes region (GLR) in the summer of 2018 and systematically compared the results against observations, reanalysis data, and WRF-CTSM (WRF coupled with the Community Terrestrial Systems Model). In general, the coupled WRF-ELM model has reasonably captured the spatial distribution of surface state variables and fluxes across the GLR, particularly over the natural vegetation areas. The evaluation results provide a baseline reference for further improvements in ELM in the regional application of high-resolution weather and climate predictions. Our work serves as an example to the model development community for expanding an advanced land surface model's capability to represent fully-coupled land–atmosphere interactions at fine spatial scales. The development and release of WRF-ELM marks a significant advancement for the ELM user community, providing opportunities for fine-scale regional representation, parameter calibration in coupled mode, and examination of new schemes with atmospheric feedback.

54 ENVIRONMENTAL SCIENCES↗

Reflection positivity of free overlap fermions

It is shown that free lattice fermions defined by overlap Dirac operator fulfill the Osterwalder-Schrader reflection positivity condition with respect to the link-reflection. The proof holds true in nongauge models with interactions such as chiral Yukawa models.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Tight connection between direct and indirect detection of dark matter through Higgs portal couplings to a hidden sector

We present a hidden Abelian extension of the standard model including a complex scalar as a dark matter candidate and a light scalar acting as a long range force carrier between dark matter particles. The Sommerfeld enhanced annihilation cross section of the dark matter explains the observed cosmic ray excesses. The light scalar field also gives rise to potentially large cross sections of dark matter on the nucleon, therefore providing an interesting way to probe this model simultaneously at direct and indirect dark matter search experiments. We constrain the parameter space of the model by taking into account the CDMS-II exclusion limit as well as PAMELA and Fermi LAT data.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Numerical modeling of fast electron generation in the presence of preformed plasma in laser-matter interaction at relativistic intensities

Fast electron generation in the presence of coronal plasma in front of a solid target (typically referred to as preformed plasma) in laser-matter interaction in the intensity range of 10{sup 19}-10{sup 21} W/cm{sup 2} is studied in a one-dimensional slab approximation with particle-in-cell (PIC) simulations. Three different preformed plasma density scale lengths of 1, 5, and 15 {mu}m are considered. We report an increase in both mean and maximum energy of generated fast electrons with an increase in the preformed plasma scale length (in the range 1-15 {mu}m). The heating of plasma electrons is predominantly due to their stochastic motion in counterpropagating electromagnetic (EM) waves (incident and reflected waves) and the presence of a longitudinal electric field produced self-consistently inside the preformed plasma. The synergetic effects of this longitudinal electric field and EM waves responsible for the efficient preformed plasma electrons heating are discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Outer satellite atmospheres: Their extended nature and planetary interactions

Highly developed numerical models are applied to interpret extended-atmosphere data for the sodium cloud of Io and the hydrogen torus of Titan. Solar radiation pressure was identified and verified by model calculations as the mechanism to explain two different east-west asymmetries observed in the sodium cloud. Analysis of sodium line profile data, suggesting that a Jupiter magnetospheric wind may be responsible for high speed sodium atoms emitted from Io, and preliminary modeling of the interaction of the Io plasma torus and Io's sodium cloud are also reported. Models presented for Titan's hydrogen torus are consistent both with the recent Pioneer 11 measurements and earlier Earth-orbiting observations by the Copernicus satellite. Progress is reported on developing models for extended gas and dust atmospheres of comets.

Smyth, W. H.↗

First-principles modeling of chemistry in mixed solvents: Where to go from here?

Mixed solvents (i.e., binary or higher order mixtures of ionic or nonionic liquids) play crucial roles in chemical syntheses, separations, and electrochemical devices because they can be tuned for specific reactions and applications. Apart from fully explicit solvation treatments that can be difficult to parameterize or computationally expensive, there is currently no well-established first-principles regimen for reliably modeling atomic-scale chemistry in mixed solvent environments. We offer our perspective on how this process could be achieved in the near future as mixed solvent systems become more explored using theoretical and computational chemistry. We first outline what makes mixed solvent systems far more complex compared to single-component solvents. An overview of current and promising techniques for modeling mixed solvent environments is provided. We focus on so-called hybrid solvation treatments such as the conductor-like screening model for real solvents and the reference interaction site model, which are far less computationally demanding than explicit simulations. We also propose that cluster-continuum approaches rooted in physically rigorous quasi-chemical theory provide a robust, yet practical, route for studying chemical processes in mixed solvents.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Bottom Fixed Platform Dynamics Models Assessing Surface Ice Interactions for Transitional Depth Structures in the Great Lakes: FAST8 – IceDyn

To create long-term solutions for offshore wind turbines in a variety of environmental conditions, CAE tools are needed to model the design-driving loads that interact with an offshore wind turbine system during operation. This report describes our efforts in augmenting existing CAE tools used for offshore wind turbine analysis with a new module that can provide simulation capabilities for ice loading on the system. This augmentation was accomplished by creating an ice-loading module coupled to FAST8, the CAE tool maintained by the NREL for simulating land-based and offshore wind turbine dynamics. The new module includes both static and dynamic ice loading that can be applied during a dynamic simulation of the response of an offshore wind turbine. The ice forces can be prescribed, or influenced by the structure’s compliant response, or by the dynamics of both the structure and the ice floe. The new module covers ice failure modes of spalling, buckling, crushing, splitting, and bending. The supporting structure of wind turbines can be modeled as a vertical or sloping form at the waterline. The Inward Battered Guide Structure (IBGS) foundation designed by Keystone Engineering for the Great Lakes was used to study the ice models coupled to FAST8. The IBGS foundation ice loading simulations in FAST8 were compared to the baseline simulation case without ice loading. The ice conditions reflecting those from Lake Huron at Port Huron and Lake Michigan at North Manitou were studied under near rated wind speed of 12 m/s for the NREL 5-MW reference turbine. Simulations were performed on ice loading models 1 through 4 and ice model 6 with their respective sub-models. The purpose of ice model 5 is to investigate ice loading on sloping structures such as ice-cones on a monopile and is not suitable for multi-membered jacketed structures like the IBGS foundation. The key response parameters from the simulations, shear forces and moments from the tower base and IBGS foundation base, were compared. Ice models 1 and 6 do not significantly affect the tower fore-aft shear and moment. However, ice model 2 (dynamic analyses), model 3 (random ice loading), and model 4 (multiple ice failure zone loading) show increased effect on the tower fore-aft shear and moment with significant effect from ice model 3.1. In general ice loading creates large reaction forces and moments at the base of the IBGS foundation; the largest occurred in model 1.1 (steady creep ice indentation loading) followed by model 3.1 (random creep ice indentation loading). In general the power production from the ice loading cases had little deviation from the baseline case without ice loading. For ultimate limit state (ULS), ice model 1.1 ice and 3.1 appear to be the ice most critical models to consider at an early stage of design. Ice model 4 is an important tool for assessing structural fatigue.

17 WIND ENERGY↗

UROX 2.0: an interactive tool for fitting atomic models into electron-microscopy reconstructions

UROX is software designed for the interactive fitting of atomic models into electron-microscopy reconstructions. The main features of the software are presented, along with a few examples. Electron microscopy of a macromolecular structure can lead to three-dimensional reconstructions with resolutions that are typically in the 30–10 Å range and sometimes even beyond 10 Å. Fitting atomic models of the individual components of the macromolecular structure (e.g. those obtained by X-ray crystallography or nuclear magnetic resonance) into an electron-microscopy map allows the interpretation of the latter at near-atomic resolution, providing insight into the interactions between the components. Graphical software is presented that was designed for the interactive fitting and refinement of atomic models into electron-microscopy reconstructions. Several characteristics enable it to be applied over a wide range of cases and resolutions. Firstly, calculations are performed in reciprocal space, which results in fast algorithms. This allows the entire reconstruction (or at least a sizeable portion of it) to be used by taking into account the symmetry of the reconstruction both in the calculations and in the graphical display. Secondly, atomic models can be placed graphically in the map while the correlation between the model-based electron density and the electron-microscopy reconstruction is computed and displayed in real time. The positions and orientations of the models are refined by a least-squares minimization. Thirdly, normal-mode calculations can be used to simulate conformational changes between the atomic model of an individual component and its corresponding density within a macromolecular complex determined by electron microscopy. These features are illustrated using three practical cases with different symmetries and resolutions. The software, together with examples and user instructions, is available free of charge at http://mem.ibs.fr/UROX/.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Flamelet mathematical models for non-premixed laminar combustion

Detailed numerical calculations based on the solution of the full transport equations have been compared with flamelet calculations in order to analyse the flamelet concept for laminar diffusion flames. The goal of this work is to study the interactive (Lagrangian Flamelet Model and Interactive Steady Flamelet Model), and non-interactive (Steady Flamelet Model and Enthalpy Defect Flamelet Model) flamelet models considering both differential diffusion and non-differential diffusion situations, and adiabatic and non-adiabatic conditions. Moreover, a new procedure has been employed to obtain enthalpy defects in the flamelet library, the application of which has been found to be encouraging. The effect of using in-situ, local or stoichiometric scalar dissipation rate conditions, and also the effect of using local or stoichiometric conditions to evaluate the flamelet-like time has been analysed. To improve slow species predictions using the non-interactive models, their transport equations are solved with the reaction terms calculated from the flamelet library, also considering local or stoichiometric conditions in the so-called Extended Flamelet Models. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fluid-Structure Interaction Simulations Of Supersonic Parachute Inflation: Model Sensitivities

Fluid-structure interaction simulations have the potential to accelerate the certification process of parachute systems for interplanetary robotic exploration missions while helping to mitigate risks by covering a wider range of scenarios than can be flight tested. The Launch, Ascent, and Vehicle Aerodynamics team is working toward actualizing this potential by further developing the capability to perform such fluid-structure interaction simulations and validating it with the best supersonic parachute flight test data available. We perform several simulations of the Advanced Supersonic Parachute Inflation Research Experiments’ third flight test (SR03) where we independently vary several parameters to determine their sensitivity on the predicted drag. We investigate sensitivity of the drag to the added mass of the confluence fitting, to the effective porosity, to how the gore seams are modeled, to viscous effects, and to deceleration. Modeling the added mass of the confluence fitting has virtually no impact on the drag, but is worthwhile to include to better match the overall system’s mass, which is important for the simulations with deceleration. Parachute drag is only marginally sensitive to porosity and viscous effects. Maximum parachute drag is most sensitive to how the gore seams are modeled, causing a nearly 20% drop when they are modeled as stiffer radials, and to deceleration, causing an additional 10% reduction. Results show improved agreement with flight test measurements when the FSI model is closest to the as-built configuration and physics experienced in flight: with the confluence fitting, viscous effects, the gore seams modeled as stiff radials, and including deceleration.

ESM↗

Nambu-Jona-Lasinio model description of weakly interacting Bose condensate and BEC-BCS crossover in dense QCD-like theories

QCD-like theories possess a positively definite fermion determinant at finite baryon chemical potential {mu}{sub B} and the lattice simulation can be successfully performed. While the chiral perturbation theories are sufficient to describe the Bose condensate at low density, to describe the crossover from Bose-Einstein condensation (BEC) to BCS superfluidity at moderate density we should use some fermionic effective model of QCD, such as the Nambu-Jona-Lasinio model. In this paper, using two-color two-flavor QCD as an example, we examine how the Nambu-Jona-Lasinio model describes the weakly interacting Bose condensate at low density and the BEC-BCS crossover at moderate density. Near the quantum phase transition point {mu}{sub B}=m{sub {pi}} (m{sub {pi}} is the mass of pion/diquark multiplet), the Ginzburg-Landau free energy at the mean-field level can be reduced to the Gross-Pitaevskii free energy describing a weakly repulsive Bose condensate with a diquark-diquark scattering length identical to that predicted by the chiral perturbation theories. The Goldstone mode recovers the Bogoliubov excitation in weakly interacting Bose condensates. The results of in-medium chiral and diquark condensates predicted by chiral perturbation theories are analytically recovered. The BEC-BCS crossover and meson Mott transition at moderate baryon chemical potential as well as the beyond-mean-field corrections are studied. Part of our results can also be applied to real QCD at finite baryon or isospin chemical potential.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

An electrodynamic model of the solar wind interaction with the ionospheres of Mars and Venus

The electrodynamic model for the solar wind interaction with nonmagnetic planets modified to include the effects of nonohmic currents in the upper ionosphere is examined. The model is used to calculate convection patterns induced by the solar wind in the ionospheres of Mars and Venus, with the observations of the neutral mass spectrometer of Vikings 1 and 2 providing the neutral atmosphere for Mars. Model calculations reproduced the retarding potential analyzer data and indicate that the ionosphere above 200 km is probably controlled by convection rather than chemistry or diffusion. The resulting model calculations were compared to radio occultation data from Mariners 5 and 10 and Venera 9 which represent extremes in the variability of the upper Cytherean ionosphere, and the calculations fell within this variation.

Cloutier, P. A.↗

Dynamical Band Flipping in Fermionic Lattice Systems: An ac-Field-Driven Change of the Interaction from Repulsive to Attractive

We show theoretically that the sudden application of an appropriate ac field to correlated lattice fermions flips the band structure and effectively switches the interaction from repulsive to attractive. The nonadiabatically driven system is characterized by a negative temperature with a population inversion. We numerically demonstrate the converted interaction in an ac-driven Hubbard model with the nonequilibrium dynamical mean-field theory solved by the continuous-time quantum Monte Carlo method. Based on this, we propose an efficient ramp-up protocol for ac fields that can suppress heating, which leads to an effectively attractive Hubbard model with a temperature below the superconducting transition temperature of the equilibrium system.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Time-dependent occupation numbers in reduced-density-matrix-functional theory: Application to an interacting Landau-Zener model

We prove that if the two-body terms in the equation of motion for the one-body reduced density matrix are approximated by ground-state functionals, the eigenvalues of the one-body reduced density matrix (occupation numbers) remain constant in time. This deficiency is related to the inability of such an approximation to account for relative phases in the two-body reduced density matrix. We derive an exact differential equation giving the functional dependence of these phases in an interacting Landau-Zener model and study their behavior in short- and long-time regimes. The phases undergo resonances whenever the occupation numbers approach the boundaries of the interval [0,1]. In the long-time regime, the occupation numbers display correlation-induced oscillations and the memory dependence of the functionals assumes a simple form.

74 ATOMIC AND MOLECULAR PHYSICS↗