Search NASA⌕ Search

SEARCH · Search NASA

Results for “ionic”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,639 records · Page 91

Ionic-Based Electrochemical Gas Sensors for Low-Cost, High-Sensitivity SO2 Detection

Sulfur dioxide (SO2) is a toxic gas associated with adverse health and environmental effects that necessitate reliable monitoring techniques. Here, we report the development of an all-solid-state electrochemical sensor utilizing a lithium borate (Li3BO3) solid electrolyte capable of subppm of SO2 detection. While subppm of SO2 sensing has been previously demonstrated in other solid-state electrolyte systems─such as stabilized zirconia, natrium super ionic conductors (NASICON) under mixed-potential conditions─here we establish Li3BO3 as an alternative solid electrolyte enabling equilibrium potentiometric sensing in an all-solid architecture. This sensor demonstrates a detection limit of at least 0.25 ppm, surpassing the human-olfactory threshold and meeting the rigorous requirements for industrial and personal monitoring applications. The sensing mechanism relies on the formation of Li2SO4 on the electrode surface, as evidenced by multimodal characterization techniques, including Raman spectroscopy, scanning electron microscopy (SEM), and scanning transmission electron microscopy (STEM). The strong linear correlation between the open-circuit potential (OCV) and the logarithm of SO2 concentration between 0.25 and 2 ppm indicates that the response is Nernstian in nature.

Lagunas, Francisco (ORCID:000000026377683X)↗

Non-Conductive Polymers Enable Higher Ionic Conductivities and Suppress Reactivity in Hybrid Sulfide-Polymer Solid State Electrolytes

Hybrid ceramic-polymer solid state electrolytes are promising candidates to enable energy-dense lithium metal batteries by leveraging inorganic high ionic conductivity and flexible polymer mechanical properties. However, studies of hybrid electrolytes using sulfide-type inorganics such as Li3PS4 (LPS) have largely focused on combining the inorganic with commercial poly(ethylene oxide) (PEO). PEO has proven to be insufficient for use in hybrid systems because it reacts with LPS and provides a competing pathway for ion transport, therefore producing a hybrid with low conductivity. Our work shows that using nonconductive, nonpolar polyethylene (PE) in a hybrid electrolyte with LPS eliminates both polymer and inorganic degradation and remarkably exhibit higher conductivities than those containing PEO at different polymer and salt concentrations. Using tracer-exchange NMR, we observe that the nonconductive nature of PE allows for iontransport through the inorganic whereas PEO provides a separate, competing pathway for lithium transport. Furthermore, compared to pure LPS, these hybrids enable longer term lithium cycling at 60°C. Our work shows that the path to enabling conductive and stable sulfide hybrids for solid state lithium metal batteries may be through the use of nonconductive, nonreactive polymers.

batteries↗

Tuning Surface, Phase, and Magnetization of Superparamagnetic Magnetite by Ionic Liquids: Single-Step Microwave-Assisted Synthesis

Achieving colloidal and chemical stability in ferrofluids by surface modification requires multiple steps, including purification, ex situ modification steps, and operation at high temperatures. In this study, a single-step microwave-assisted methodology is developed for iron oxide nanoparticle (IONP) synthesis utilizing a series of imidazolium-based ionic liquids (ILs) with chloride, bis(trifluoromethylsulfonyl)imide, and pyrrolide anions as the reaction media, thus eliminating the use of volatile organics while enabling rapid synthesis at 80 °C as well as in situ surface functionalization. The characterized surface functionality, hydrodynamic particle size, magnetization, and colloidal stability of the IONPs demonstrate a strong dependence on the IL structure, ion coordination strength, reactivity, and hydrophilicity. The IONPs present primarily a magnetite (Fe 3 O 4 ) phase with superparamagnetism with the highest saturation magnetization at 81 and 73 emu/g at 10 and 300 K, respectively. Depending on the IL coating, magnetization and exchange anisotropy decrease by 20 and 2–3 emu/g (at 35 wt % IL), respectively, but still represent the highest magnetization achieved for coated IONPs by a coprecipitation method. Further, the surface-functionalized superparamagnetic magnetite nanoparticles show good dispersibility and colloidal stability in water and dimethyl sulfoxide at 0.1 mg/mL concentration over the examined 3 month period. This study reports on the intermolecular and chemical interactions between the particle surface and the ILs under synthetic conditions as they relate to the magnetic and thermal properties of the resulting IONPs that are well suited for a variety of applications, including separation and catalysis.

36 MATERIALS SCIENCE↗

Improved Lubricating Performance by Combining Oil-Soluble Hairy Silica Nanoparticles and an Ionic Liquid as an Additive for a Synthetic Base Oil

This article reports on improved lubricating performance by combining oil-soluble poly(lauryl methacrylate) brush-grafted silica nanoparticles (hairy NPs or HNP) and an oil-miscible phosphonium-phosphate ionic liquid (IL) as a friction-reducing additive for a polyalphaolefin (PAO) oil. The HNP was synthesized by surface-initiated reversible addition–fragmentation chain transfer polymerization. At a total concentration of 2% and sufficiently high individual concentrations for HNP and IL in PAO, high-contact stress, ball-on-flat reciprocating tribological tests showed that the friction decreased by up to 23% compared with 2% HNP alone in PAO and by up to 35% compared to the PAO mixed with 2% IL. Scanning electron microscopy, energy-dispersive X-ray spectroscopy, and X-ray photoelectron spectroscopy (XPS) analysis revealed that the tribofilm formed from the PAO containing 1% HNP + 1% IL was enriched with both Si and P, indicating that both hairy NPs and IL were involved in the tribochemical reactions. In addition, the O 1s and Si 2p peaks in the core-level XPS spectra exhibited significant shifts for the mixture of 1% HNP + 1% IL compared to those for 2% HNP, suggesting the possible formation of new covalent bonds. These results indicated that HNP and IL reacted with each other and also with the metal substrate during the rubbing process, which likely strengthened the tribofilm and its bonding with the substrate and thus further improved the lubrication.

36 MATERIALS SCIENCE↗

Solvate Ionic Liquids at Electrified Interfaces

Solvate ionic liquids (SILs) are a promising electrolyte for Li-ion batteries; thus, their behavior at electrified interfaces is crucial for the operation of these batteries. We report molecular dynamics simulation results for a prototypical SIL of lithium triglyme bis(trifluoro-methanesulfonyl)imide ([Li(G3)][TFSI]) sandwiched between electrified surfaces. At negatively charged as well as neutral electrodes, the electrolyte largely maintains the characteristics of SILs, e.g., a majority of the interfacial Li + ions remains coordinated by the similar number of oxygen atoms on G3 ligands as the bulk Li + ions. The persistence of the complex ions is attributed to the 1:1 Li-G3 ratio in bulk SILs and the fact that G3 molecules readily adapt to the interfacial environment, e.g., by aligning themselves with the surface to ensure good solvation of the interfacial Li + ions. Nevertheless, the interfacial Li + ions also display changes of solvation from that in bulk SIL by deviating from the molecular plane formed by the oxygen atoms on G3 ligands as electrodes become more negatively charged. Using density functional theory along with natural bond orbital calculations, we examine the effects of such structural distortion on the properties of the complex cation. Both the frontier orbital energies of the complex cation and the donor-acceptor interactions between Li + ions and G3 ligands are found to be dependent on the deviation of Li + ions from the molecular plane of the G3 ligands, which suggest that the reduction of Li + ions should be facilitated by the structural distortion. These results bear important implications for the nanostructures and properties of SILs near electrified interfaces during actual operations of Li-ion batteries and serve to provide guidance toward the rational design of new SILs electrolytes.

25 ENERGY STORAGE↗

Guanidinium-Based Ionic Covalent-Organic Nanosheets for Sequestration of Cr(VI) and As(V) Oxoanions in Water

Chromium- and arsenic-based oxoanions are among the major highly toxic and carcinogenic inorganic pollutants present in groundwater, demanding fast and selective sequestration. Efficient capturing and removal of these highly mobile oxometallates at neutral pH presents a great challenge in groundwater cleanup. In this report, a series of guanidinium-based ionic organic covalent nanosheets (iCONs) with varying hydrogen bonding, steric, and electronic properties was studied to examine the structure–activity relationship in the adsorption and removal of chromium- and arsenic-based oxoanions in water. Structural modulations in iCONs were found to alter the guanidinium acidity, thus regulating the oxoanion uptake limits via ion exchange. The hydrogen bonding, steric, and electrostatic interactions at/near the guanidinium-based anion binding site in iCONs exerted heavy influences on the uptake efficiency and selectivity of arsenate but not on those of chromate. Further analyses revealed that the parallel bidentate hydrogen bonding interactions play a key role in the weak binding of arsenate to the protonated/positively charged guanidine motifs, whereas the strong ion–ion interactions between chromate and guanidinium appear to be more tolerant to the geometric and structural perturbation.

36 MATERIALS SCIENCE↗

Influence of Grafting Density and the Ionic Environment on the Structure of Zwitterionic Brushes

Zwitterionic polymer brushes possess a high potential for applications as surface coatings, e.g., in antifouling applications. Their complex association behavior due to the coexistence of oppositely charged groups on the same monomeric unit allows for a broad variation of polarity, hydrophilicity, and the antipolyelectrolyte effect with the variation of the surrounding environment. In this study, planar polysulfobetaine brushes were investigated with neutron reflectometry (NR) and neutron spin–echo spectroscopy under grazing incidence (GINSES) to explore the brush structure and its inner dynamics perpendicular to the substrate. In particular, the effects of the substrate–initiator system and ionic strength on the structure were investigated with neutron reflectometry and a swelling by a factor of 3–5 was found in the presence of aqueous NaCl and MgCl 2 solutions compared to the dry state. During the data analysis, the applicability of a model-free evaluation was also demonstrated for the investigated polysulfobetaine brushes. Furthermore, it was found with GINSES that in contrast to neutral brushes, these polysulfobetaine brushes do not show the typical concentration fluctuations in the nanosecond time range when partially swollen with salt-free water.

36 MATERIALS SCIENCE↗

Exploring low-temperature dehydrogenation at ionic Cu sites in beta zeolite to enable alkane recycle in dimethyl ether homologation

Cu-based catalysts containing targeted functionalities including metallic Cu, oxidized Cu, ionic Cu, and Bronsted acid sites were synthesized and evaluated for isobutane dehydrogenation. Hydrogen productivities, combined with operando X-ray absorption spectroscopy, indicated that Cu(I) sites in Cu/BEA catalysts activate C-H bonds in isobutane. Computational analysis revealed that isobutane dehydrogenation at a Cu(I) site proceeds through a two-step mechanism with a maximum energy barrier of 159 kJ/mol. Furthermore, these results demonstrate that light alkanes can be reactivated on Cu/BEA, which may enable re-entry of these species into the chain-growth cycle of dimethyl ether homologation, thereby increasing gasoline-range (C 5+ ) hydrocarbon yield.

09 BIOMASS FUELS↗

Modeling the Ionic Strength Effect on Diffusion in Clay. The DR-A Experiment at Mont Terri

Solute diffusion in compacted clays depends on ionic strength through its control on the thickness of the electrical double layer (EDL) on the charged clay surfaces. In the DR-A field experiment (Mont Terri, Switzerland), synthetic porewater was circulated through a borehole for 189 days, leading to the out-diffusion of a variety of tracers into the Opalinus Clay. The borehole solution was then replaced with a higher-salinity solution for an additional 540 days, leading to the diffusion of Cs + , Ca 2+ , Mg 2+ , and Sr 2+ back into the borehole and to an increase in the out-diffusion of anions (I - , Br - ) and 3 H. The experimental results were interpreted using the CrunchClay code, which includes a mean electrostatic potential model for the EDL. The EDL corresponds to a second continuum in addition to bulk electrically neutral porewater. Species-specific diffusion (Nernst-Planck equation) occurs through both domains. A 1D radial model considered a single pore diffusion coefficient (Dp = 10-9 m2/s) for cations and 3H in the bulk porosity, and a smaller D p (3 × 10 -10 m 2 /s) for anions. Dp values in the EDL were smaller (10 -11 m 2 /s), except for Cs + and K + (5 × 10 -10 and 2 × 10 -10 m 2 /s, respectively). The model reproduced well the experimental results and showed the capability to consider temporal changes in geochemical conditions affecting the transport and retention of potentially important radionuclide contaminants (e.g., 137 Cs + , 90 Sr 2+ , 129 I - ) in underground geological nuclear waste repositories. Finally, coupled multicomponent diffusion together with the electrostatic properties of the charged surfaces are essential in the development of predictive models for ion transport in clays.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Printable, Degradable, and Biocompatible Ion Gels from a Renewable ABA Triblock Polyester and a Low Toxicity Ionic Liquid

We have designed printable, biocompatible, and degradable ion gels by combining a novel ABA triblock aliphatic polyester, poly(ε-decalactone)-b-poly(dl-lactide)-b-poly(ε-decalactone), and a low toxicity ionic liquid, 1-butyl-1-methylpyrrolidinium bistrifluoromethanesulfonylimide ([P14][TFSI]). Due to the favorable compatibility between amorphous poly(dl-lactide) and [P14][TFSI] and the insolubility of the poly(ε-decalactone), the triblock polymer forms self-assembled micellar cross-links similar to thermoplastic elastomers, which ensures similar processing conditions and mechanical robustness during the fabrication of printed electrolyte-gated organic transistor devices. Additionally, the ester backbone in the polymer structure enables efficient hydrolytic degradation of these ion gels compared to those made previously using carbon-backbone polymers.

36 MATERIALS SCIENCE↗

Dual Modification of MOFs Improves Dispersion and Ionic Conductivity of Mixed Matrix Membranes

Nonaqueous redox flow batteries (NARFBs) are a promising class of energy storage devices, but the lack of a chemically stable, conductive membrane that exhibits size-selectivity over redox-active species prevents their broader implementation. Recently, metal–organic frameworks (MOFs) have been implemented into mixed-matrix membranes (MMMs) for NARFBs, but the effects of the MOF linker functionality on membrane properties are not well-understood. In this work, we develop a series of MOF-based MMMs by blending postsynthetically modified variants of UiO-66-NH2 with poly(ethylene-co-vinyl acetate). The modification of UiO-66-NH2 with sulfate groups initially resulted in poor dispersion throughout the MMMs, but when dual-modified with poly(N-isopropylacrylamide), MOF dispersion throughout the MMM was improved, and ionic conductivity was significantly higher than the UiO-66-NH2 MMMs. Furthermore, the dual-modified MMMs demonstrated excellent size-selectivity by blocking redox active species transport. This work demonstrates a synergy between the MOF functional groups to improve MMM properties critical for the development of practical NARFBs.

Carey, Cassidy A.↗

Ionic Liquid Functionalizes the Metal Organic Framework for Microwave-Assisted Direct Air Capture of CO 2

Sorbents for direct air capture (DAC) of CO 2 typically employ a chemisorbing material that requires regeneration at elevated temperatures, which is an energy-intensive step. Here, we developed composites of metal organic framework (MOF) with a functional ionic liquid (IL) at 5, 20, and 35 wt % loading, capable of CO 2 chemisorption and regeneration by moisture-swing coupled microwave (MW) irradiation. In dynamic breakthrough measurements, CO 2 from synthetic air (500 ppm of CO 2 ) was selectively absorbed (0.5 mmol/g at 30 °C) and then rapidly released (2–4 min) by dielectric heating at 60 °C. The developed IL/MOF composites demonstrate (1) targeted energy transfer to the IL domains where CO 2 is released due to dielectric heating upon MW irradiation and (2) a fast desorption rate due to large surface area offered by the MOF architecture. Furthermore, this study establishes carbon capture through surface enhancement of a porous substrate with ILs for future DAC processes that can be powered by sustainable energy sources.

36 MATERIALS SCIENCE↗

Characterizing Olefin Selectivity and Stability of Silver Salts in Ionic Liquids Using Inverse Gas Chromatography

Separation systems utilizing silver(I) ion-olefin complexation have limitations since silver(I) ions can be poisoned or reduced to metallic silver. Ionic liquids (ILs) are used as solvents for silver(I) ions to facilitate separations since their physico-chemical properties can be easily tuned. To develop separation systems with sustainable olefin selectivity, factors that affect silver(I) ion stability need to be understood. In this study, a total of 13 silver salt/IL mixtures were examined by inverse gas chromatography to identify the effects of silver salt anion and IL cation/anion combination on silver(I) ion stability. The effects of temperature and three different exposure gases on silver(I) ion stability were systematically studied. Exposing silver salt/IL mixtures to hydrogen at high temperatures had a greater effect on decreasing silver(I) ion-olefin complexation. Silver(I) ions from the silver bis[(trifluoromethyl)sulfonyl]imide ([NTf 2 – ]) salt were more stable in [NTf 2 – ]-containing ILs than in [BF 4 – ]-containing ILs. Optimum mixtures exhibited high olefin selectivity and were stable beyond 90 h when exposed to hydrogen gas.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ionic-liquid-Assisted Fabrication of Lignocellulosic Thin Films with Tunable Hydrophobicity

Thin films with enhanced water repellency and mechanical strength can be fabricated from renewable lignocellulosic feedstock as a replacement for petrochemical-derived synthetic polymers, such that it minimizes life cycle impact on the environment and human health. In this work, hybrid poplar wood, either untreated (control) or pretreated with hot water at 160 °C for 20 min (HWE-20), 60 min (HWE-60), and 90 min (HWE-90), was dissolved in 1-ethyl-3-methylimidazolium acetate and regenerated to fabricate thin films. The HWE-90 films were enriched in lignin by 74%, specifically on the surface, which along with hemicellulose depletion imparted hydrophobicity (108° water contact angle) when compared to the control (56°), HWE-20 (77°), and HWE-60 (84°) films. They also exhibited 86% reduced water vapor sorption hysteresis and 75% improved storage modulus compared to the control. Thus, we demonstrate how to tune the lignocellulosic film properties via a combination of hot water pretreatment and ionic liquid dissolution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Determination of Infinite Dilution Activity Coefficients of Molecular Solutes in Ionic Liquids and Deep Eutectic Solvents by Factorization-Machine-Based Neural Networks

Widely known as “green solvents,” ionic liquids (ILs) and deep eutectic solvents (DESs) have been used as substitutes for traditional organic solvents in separation science. To achieve better separations using ILs and DESs, this work aimed to predict the infinite dilution activity coefficients (IDACs) of molecular solutes in these solvents with the state-of-the-art factorization-machine-based neural network (DeepFM). DeepFM combines the benefits of factorization machines and deep neural networks to learn both low-order and high-order interactions among features. The IDAC prediction model was established with 52,372 experimental IDAC datapoints including 260 solvents (252 ILs and 8 DESs) and 112 molecular solutes collected at various temperatures from 288.15 to 428.15 K. Chemical information describing the ILs, DESs, and molecular solutes was included in the IDAC prediction model, including chemical functional groups, molecular weights, and Abraham solvation parameters. The IDAC prediction model showed an improved accuracy compared with alternative models; additionally, DESs were included in the IDAC prediction model for the first time. Here, the model will reduce the energy and resources needed to optimize the selection of ILs and DESs for specific separations, which will promote the development of these green solvents for sustainable chemical processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Life-Cycle Greenhouse Gas and Water Intensity of Cellulosic Biofuel Production Using Cholinium Lysinate Ionic Liquid Pretreatment

Cellulosic biofuels present an opportunity to meet a significant fraction of liquid transportation fuel demand with renewable, low-carbon alternatives. Certain ionic liquids (ILs) have proven effective at facilitating hydrolysis of lignocellulose to produce fermentable sugars with high yields. Although their negligible vapor pressure and low flammability make ILs attractive solvents at the point of use, their life-cycle environmental impacts have not been investigated in the context of cellulosic biorefineries. This study provides the first life-cycle greenhouse gas (GHG) and water use inventory for biofuels produced using IL pretreatment. We explore two corn stover-to-ethanol process configurations: the conventional water-wash (WW) route and the more recently developed integrated high gravity (iHG) route, which eliminates washing steps after pretreatment. Our results are based on the use of a representative IL, cholinium lysinate ([Ch][Lys]). We find that the WW process results in unacceptably high GHG emissions. The iHG process has the potential to reduce GHG emissions per megajoule of fuel by ~45% relative to gasoline if [Ch][Lys] is used. Use of a protic IL with comparable performance to [Ch][Lys] could achieve GHG reductions up to 70-85%. The water intensities of the WW and iHG processes are both comparable to those of other cellulosic biofuel technologies.

09 BIOMASS FUELS↗

Anti-Wear Performance and Mechanism of an Oil-Miscible Ionic Liquid as a Lubricant Additive

An ionic liquid (IL) trihexyltetradecylphosphonium bis(2-ethylhexyl) phosphate has been investigated as a potential anti-wear lubricant additive. Unlike most other ILs that have very low solubility in non-polar fluids, this IL is fully miscible with various hydrocarbon oils. In addition, it is thermally stable up to 347 oC, showed no corrosive attack to cast iron in ambient environment, and has excellent wettability on solid surfaces (e.g., contact angle on cast iron <8o). Most importantly, this phosphonium-based IL has demonstrated effective anti-scuffing and anti-wear characteristics when blended with lubricating oils. For example, a 5 wt.% addition into a synthetic base oil eliminated the scuffing failure experienced by the neat oil and, as a result, reduced the friction coefficient by 60% and the wear rate by three orders of magnitude. A synergistic effect on wear protection was observed with the current anti-wear additive when added into a fully-formulated engine oil. Nanostructure examination and composition analysis revealed a tribo-boundary film and subsurface plastic deformation zone for the metallic surface lubricated by the IL-containing lubricants. This protective boundary film is believed to be responsible for the IL s anti-scuffing and anti-wear functionality.

36 MATERIALS SCIENCE↗

Concerted Mitigation of O···H and C(π)···H Interactions Prospects Sixfold Gain in Optical Nonlinearity of Ionic Stilbazolium Derivatives

DAST (4-dimethylamino-N-methyl-4-stilbazolium tosylate) is the most commercially successful organic nonlinear optical (NLO) material for frequency-doubling, integrated optics, and THz wave applications. Its success is predicated on its high optical nonlinearity with concurrent sufficient thermal stability. Many chemical derivatives of DAST have therefore been developed to optimize their properties; yet, to date, none have surpassed the overall superiority of DAST for NLO photonic applications. This is perhaps because DAST is an ionic salt wherein its NLO-active cation is influenced by multiple types of subtle intermolecular forces that are hard to quantify, thus, making difficult the molecular engineering of better functioning DAST derivatives. Here, we establish a model parameter, ηinter, that isolates the influence of intermolecular interactions on second-order optical nonlinearity in DAST and its derivatives, using second-harmonic generation (SHG) as a qualifier; by systematically mapping intercorrelations of all possible pairs of intermolecular interactions to ηinter, we uncover a relationship between concerted intermolecular interactions and SHG output. This correlation reveals that a sixfold gain in the intrinsic second-order NLO performance of DAST is possible, by eliminating the identified interactions. This prediction offers the first opportunity to systematically design next-generation DAST-based photonic device nanotechnology to realize such a prospect.

36 MATERIALS SCIENCE↗