Search NASA⌕ Search

SEARCH · Search NASA

Results for “microstructure modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,639 records · Page 91

Fatigue behavior analysis and multi-scale modelling of chopped carbon fiber chip-reinforced composites under tension-tension loading condition

Here, the fatigue damage behavior of chopped carbon fiber chip-reinforced composite has been experimentally and numerically investigated. A large scatter is exhibited in the S-N diagram due to the random distribution of carbon fiber chips, and therefore a new analysis procedure is proposed to link the local microstructure to the fatigue behavior of the bulk material. Interrupted fatigue tests are also performed so that microstructure characterization can be conducted on the tested samples to analyze the crack initiation and propagation. Inspired from the experimental findings, a multi-scale progressive damage fatigue model is proposed to predict the fatigue behavior. The model incorporates a new stochastic chip-packing algorithm for microstructure reconstruction along with continuum damage models into the representative volume element (RVE) model in ABAQUS/Explicit. Finally, the simulation results based on the proposed model are in good agreement with the experimental data in terms of cracking modes and predicted life.

36 MATERIALS SCIENCE↗

Model-informed, Adaptive Physical Vapor Deposition to Fabricate Hierarchical Binary-alloy Thin-films

Designing next generation thin films, tailor-made for specific applications, relies on the availability of robust processing-structure-property relationships. Traditional structure zone diagrams are limited to low-dimensional mappings, with machine-learning methods only recently attempting to relate multiple processing parameters to the final microstructure. Despite this progress, structure-processing relationships are unknown for processing conditions that vary during thin-film deposition, limiting the range of microstructures and properties achievable. In this project, we employed a phase-field computational model combined with a genetic algorithm (GA) to identify and design time-dependent processing protocols that achieve tailor-made microstructures. We simulate the physical vapor deposition of a binary-alloy thin film by employing a phase-field model, where deposition rates and diffusivities are controlled via the genetic algorithm. Our GA-guided protocols achieve targeted microstructures with lateral and vertical concentration modulations, as well as more complex, hierarchical microstructures previously not described in simple structure zone diagrams. Our algorithm provides insight to experimentalists looking for additional avenues to design novel thin-film microstructures.

36 MATERIALS SCIENCE↗

Cluster dynamics models of irradiation damage accumulation in ferritic iron. I. Trap mediated interstitial cluster diffusion

The microstructure that develops under low temperature irradiation in ferritic alloys is dominated by a high density of small (2–5 nm) defects. These defects have been widely observed to move via occasional discrete hops during in situ thin film irradiation experiments. Cluster dynamics models are used to describe the formation of these defects as an aggregation process of smaller clusters created as primary damage. Multiple assumptions regarding the mobility of these damage features are tested in the models, both with and without explicit consideration of such irradiation induced hops. Comparison with experimental data regarding the density of these defects demonstrates the importance of including such motions in a valid model. In particular, discrete hops inform the limited dependence of defect density on irradiation temperature observed in experiments, which the model was otherwise incapable of producing.

36 MATERIALS SCIENCE↗

Predicting phase transformation kinetics during metal additive manufacturing using non-isothermal Johnson-Mehl-Avrami models: Application to Inconel 718 and Ti-6Al-4V

Here, a computational model was developed to predict solid-state phase transformation kinetics within mechanical parts during metal additive manufacturing processes. This model is a modified version of the Johnson-Mehl-Avrami model for non-isothermal phase transformations that can be applied to various material systems undergoing solid-state phase transformations. Using the thermal history of an additive manufacturing fabricated mechanical part, along with the necessary thermodynamic data and kinetic information as inputs, the model outputs the history of phase fraction evolution during the build process. The model was applied to an Inconel 718 part built by powder bed fusion and a Ti-6Al-4V part built by directed energy deposition. Microstructure characterization and mechanical testing were performed for the validation of the model.

36 MATERIALS SCIENCE↗

Advances in Neutron Radiography: Application to Additive Manufacturing Inconel 718

Reactor-based neutron radiography is a non-destructive, non-invasive characterization technique that has been extensively used for engineering materials such as inspection of components, evaluation of porosity, and in-operando observations of engineering parts. Neutron radiography has flourished at reactor facilities for more than four decades and is relatively new to accelerator-based neutron sources. Recent advances in neutron source and detector technologies, such as the Spallation Neutron Source (SNS) at the Oak Ridge National Laboratory (ORNL) in Oak Ridge, TN, and the microchannel plate (MCP) detector, respectively, enable new contrast mechanisms using the neutron scattering Bragg features for crystalline information such as average lattice strain, crystalline plane orientation, and identification of phases in a neutron radiograph. Additive manufacturing (AM) processes or 3D printing have recently become very popular and have a significant potential to revolutionize the manufacturing of materials by enabling new designs with complex geometries that are not feasible using conventional manufacturing processes. However, the technique lacks standards for process optimization and control compared to conventional processes. Residual stresses are a common occurrence in materials that are machined, rolled, heat treated, welded, etc., and have a significant impact on a component s mechanical behavior and durability. They may also arise during the 3D printing process, and defects such as internal cracks can propagate over time as the component relaxes after being removed from its build plate (the base plate utilized to print materials on). Moreover, since access to the AM material is possible only after the component has been fully manufactured, it is difficult to characterize the material for defects a priori to minimize expensive re-runs. Currently, validation of the AM process and materials is mainly through expensive trial-and-error experiments at the component level, whereas in conventional processes the level of confidence in predictive computational modeling is high enough to allow process and materials optimization through computational approaches. Thus, there is a clear need for non-destructive characterization techniques and for the establishment of processing- microstructure databases that can be used for developing and validating predictive modeling tools for AM.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Creep behavior of Alloy 709 at 700 °C

Alloy 709 is an austenitic stainless steel with potential for structural applications in sodium-cooled fast reactors. In this study, creep tests on Alloy 709 specimens were performed at a temperature of 700°C under applied stresses in the range of 125 to 250 MPa. Here, the alloy exhibited a brief primary, insignificant secondary and prolonged tertiary creep stages. A Norton stress exponent (n) of ~6 was obtained from the creep plots. Microstructural analyses were carried out for both as-received and crept specimens using optical microscopy, electron backscattered diffraction, and transmission electron microscopy. The microstructures of the as-received and crept specimens were compared. The mode of fracture was transgranular as revealed by scanning electron microscopy of the creep-ruptured specimens. Thermodynamic and precipitation modeling was performed in order to obtain information on the phase types and the kinetics of precipitation for the sigma-phase and the M 23 C 6 carbide. Based on the creep data, microstructural observations and relevant modeling, creep deformation and failure mechanisms at the considered temperature are elucidated.

36 MATERIALS SCIENCE↗

Modelling the graphite fracture mechanisms

In order to define a design criterion for graphite components, it is important to identify the physical phenomena responsible for the graphite fracture, to include them in a more effective modelling. In a first step, a large panel of experiments have been realised in order to build up an important database; results of tensile tests, 3 and 4 point bending tests on smooth and notched specimens have been analysed and have demonstrated an important geometry related effects on the behavior up to fracture. Then, first simulations with an elastic or an elastoplastic bilinear constitutive law have not made it possible to simulate the experimental fracture stress variations with the specimen geometry, the fracture mechanisms of the graphite being at the microstructural scale. That is the reason why a specific F.E. model of the graphite structure has been developed in which every graphite grain has been meshed independently, the crack initiation along the basal plane of the particles as well as the crack propagation and coalescence have been modelled too. This specific model has been used to test two different approaches for fracture initiation: a critical stress criterion and two criteria of fracture mechanic type. They are all based on crystallographic considerations as a global critical stress criterion gave unsatisfactory results. The criteria of fracture mechanic type being extremely unstable and unable to represent the graphite global behaviour up to the final collapse, the critical stress criterion has been preferred to predict the results of the large range of available experiments, on both smooth and notched specimens. In so doing, the experimental observations have been correctly simulated: the geometry related effects on the experimental fracture stress dispersion, the specimen volume effects on the macroscopic fracture stress and the crack propagation at a constant stress intensity factor. In addition, the parameters of the criterion have been related to experimental observations: the local crack initiation stress of 8 MPa corresponds to the non-linearity apparition on the global behavior observed experimentally and the the maximal critical stress defined for the particle of 30 MPa is equivalent to the fracture stress of notched specimens. This innovative combination of crack modelling and a local crystallographic critical stress criterion made it possible to understand that cleavage initiation and propagation in the graphite microstructure was driven by a mean critical stress criterion. (authors)

36 MATERIALS SCIENCE↗

Characterization of complex thermal barrier deposits pore microstructures by a combination of imaging, scattering and intrusion techniques.

Complexity, wide size ranges, and anisotropy are attributes that can describe porous microstructures of thermally sprayed deposits, which present especially difficult challenges for characterization techniques. A number of different methods have been utilized and found to be useful while having significant limitations. Therefore, scientists and engineers need to understand the advantages, limitations, and disadvantages of each technique. This very short review attempts to present a wide range of characterization tools - from frequently employed optical and scanning electron imaging techniques, through intrusion porosimetry, to lesser-used x-ray and neutron imaging and scattering techniques. It will be shown that no technique in itself is sufficient and that a properly selected combination of techniques is necessary to get a sufficiently complex characterization method. A really powerful and capable characterization protocol may need to combine fast and accessible ('in-house') tools with sparingly applied advanced scattering and imaging techniques. Such a combination of techniques can then be utilized to research the processing-microstructure-properties relationships as well as to provide sufficient data for development of successful models.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Predicting the morphologies of γ' precipitates in cobalt-based superalloys

Cobalt-based alloys with γ/γ' microstructures have the potential to become the next generation of superalloys, but alloy compositions and processing steps must be optimized to improve coarsening, creep, and rafting behavior. While these behaviors are different than in nickel-based superalloys, alloy development can be accelerated by understanding the thermodynamic factors influencing microstructure evolution. In this work, we develop a phase field model informed by first-principles density functional theory and experimental data to predict the equilibrium shapes of Co-Al-W γ' precipitates. Three-dimensional simulations of single and multiple precipitates are performed to understand the effect of elastic and interfacial energy on coarsened and rafted microstructures; the elastic energy is dependent on the elastic stiffnesses, misfit strain, precipitate size, applied stress, and precipitate spatial distribution. We observe characteristic microstructures dependent on the type of applied stress that have the same γ' morphology and orientation seen in experiments, indicating that the elastic stresses arising from coherent γ/γ' interfaces are important for morphological evolution during creep. Here, the results also indicate that the narrow γ channels between γ' precipitates are energetically favored, and provide an explanation for the experimentally observed directional coarsening that occurs without any applied stress.

36 MATERIALS SCIENCE↗

Stress localization investigation of additively manufactured GRCop-42 thin-wall structure

A full-field crystal plasticity (CP) framework is presented for the GRCop-42 alloy to study microscopic mechanical behavior and local stress heterogeneities. The microstructures of additively manufactured (AM) materials are often unique relative to conventionally processed materials, and the local thermal histories drive these differences during the build process. These thermal histories depend on the process parameters (laser power, scan speed, and scan strategy) and the part geometry. Prior research has shown that the mechanical properties of thin-walled structures can vary significantly with wall thickness due to changes in the thermal boundary conditions during manufacturing. It is, therefore, desirable to perform CP simulations based on the phenomenological constitutive model to predict the local mechanical responses induced by microstructural heterogeneities. This work generates representative microstructures based on experimentally collected grain information (i.e., texture) for grain scale stress analysis, and the material constitutive parameters are calibrated using the experimental mechanical testing data. Here, we specifically investigated the effect of crystallographic texture and grain morphologies on the size-dependent mechanical properties of AM GRCop-42. The selection of appropriate material properties for implementing an effective free surface boundary condition and the influence of adjacent buffer layers are also discussed. Analysis of local field results reveals a strong correlation between stress localization and the initial grain orientation. However, no significant relationship between the misorientation of the individual adjacent grains and the average misorientation is observed.

36 MATERIALS SCIENCE↗

Crystal plasticity analysis of stress partitioning mechanisms and their microstructural dependence in advanced steels

Two-phase advanced steels contain an optimized combination of high yield strength and large elongation strain at failure, as a result of stress partitioning between a hard phase (martensite) and a ductile phase (ferrite or austenite). Provided with strong interfaces between the constituent phases, the failure in the brittle martensite phase will be delayed by the surrounding geometric constraints, while the rule of mixture will dictate a large strength of the composite. To this end, the microstructural design of these composites is imperative especially in terms of the stress partitioning mechanisms among the constituent phases. Based on the characteristic microstructures of dual phase and multilayered steels, two polycrystalline aggregate models are constructed to simulate the microscopic lattice strain evolution of these materials during uniaxial tensile tests. By comparing the lattice strain evolution from crystal plasticity finite element simulations with advanced in situ diffraction measurements in literature, this study investigates the correlations between the material microstructure and the micromechanical interactions on the intergranular and interphase levels. Finally, it is found that although the applied stress will be ultimately accommodated by the hard phase and hard grain families, the sequence of the stress partitioning on grain and phase levels can be altered by microstructural designs. Implications of these findings on delaying localized failure are also discussed.

36 MATERIALS SCIENCE↗

Fabrication and thermophysical property characterization of UN/U 3 Si 2 composite fuel forms

High uranium density composite fuels composed of UN and U 3 Si 2 have been fabricated using a liquid phase sintering route at temperatures between 1873 K and 1973 K and spanning compositions of 10 vol% to 40 vol% U 3 Si 2 . Microstructural analysis and phase characterization revealed the formation of an U-Si-N phase of unknown structure. Microcracking was observed in the U-Si portion of the composite microstructure that likely originates from the mismatched coefficient of thermal expansion between the UN and U 3 Si 2 leading to stresses on heating and cooling of the composite. Thermal expansion coefficient, thermal diffusivity, and thermal conductivity were characterized for each of the compositions as a function of temperature to 1673 K. Hysteresis is observed in the thermal diffusivity for the 20 vol% through 40 vol% specimens between room temperature and 1273 K, which is attributed to the microcracking in the U-Si phase. Thermal conductivity of the composites was modeled using the MOOSE framework based on the collected microstructure data. In conclusion, the impact of irradiation on thermal conductivity was also simulated for this class of composite materials.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Effective Transport Properties Accounting for Electrochemical Reactions of Proton-Exchange Membrane Fuel Cell Catalyst Layers

There has been a rapidly growing interest in three-dimensional micro-structural reconstruction of fuel cell electrodes so as to derive more accurate descriptors of the pertinent geometric and effective transport properties. Due to the limited accessibility of experiments based reconstruction techniques, such as dual-beam focused ion beam-scanning electro microscopy or micro X-Ray computed tomography, within sample micro-structures of the catalyst layers in polymer electrolyte membrane fuel cells (PEMFCs), a particle based numerical model is used in this study to reconstruct sample microstructure of the catalyst layers in PEMFCs. Then the reconstructed sample structure is converted into the computational grid using body-fitted/cut-cell based unstructured meshing technique. Finally, finite volume methods (FVM) are applied to calculate effective properties on computational sample domains.

08 HYDROGEN↗

Numerical modeling of heat-transfer and the influence of process parameters on tailoring the grain morphology of IN718 in electron beam additive manufacturing

The fabrication of 3-D parts from CAD models by additive manufacturing (AM) is a disruptive technology that is transforming the metal manufacturing industry. The correlation between solidification microstructure and mechanical properties has been well understood in the casting and welding processes over the years. This paper focuses on extending these principles to additive manufacturing to understand the transient phenomena of repeated melting and solidification during electron beam powder melting process to achieve site-specific microstructure control within a fabricated component. In this paper, we have developed a novel melt scan strategy for electron beam melting of nickel-base superalloy (Inconel 718) and also analyzed 3-D heat transfer conditions using a parallel numerical solidification code (Truchas) developed at Los Alamos National Laboratory. The spatial and temporal variations of temperature gradient (G) and growth velocity (R) at the liquid-solid interface of the melt pool were calculated as a function of electron beam parameters. By manipulating the relative number of voxels that lie in the columnar or equiaxed region, the crystallographic texture of the components can be controlled to an extent. The analysis of the parameters provided optimum processing conditions that will result in columnar to equiaxed transition (CET) during the solidification. Furthermore, the results from the numerical simulations were validated by experimental processing and characterization thereby proving the potential of additive manufacturing process to achieve site-specific crystallographic texture control within a fabricated component.

43 PARTICLE ACCELERATORS↗

A continuum dislocation-based model of wedge microindentation of single crystals

Recent Electron Backscatter Diffraction (EBSD) experiments have revealed the emergence of heterogeneous dislocation microstructures forming under a wedge indenter in fcc crystals, where micro-meter dislocation patterns challenge the predictions of traditional models of plasticity. In order to explain the formation of these features and develop a relationship between the force-displacement curve and the dislocation substructure, here we present a model of wedge indentation based on the continuum theory of dislocations. The model accounts for large deformation kinematics through the multiplicative split of the deformation gradient tensor, where the incompatible plastic component of deformation results from the flux of dislocations on different and interacting slips systems. Constitutive equations for dislocation fluxes are determined from a dissipative variational principle. As a result, each dislocation density satisfies an initial-boundary value problem with convective-diffusive character, which is coupled to the macroscopic stress and displacement fields governing the deformation process. Solution to the self-consistent continuum formulation is found using the finite element method. Computer simulations mimic the experimental conditions of wedge micro-indentation experiments into Ni single-crystals used by Kysar et al. (2010a). A comparison of overall dislocation density distribution and macroscopic mechanical response shows good overall agreement with the experimental results in terms of the detailed features of dislocation patterns and lattice rotations as well as the macroscopic force-displacement response.

36 MATERIALS SCIENCE↗

Effects of twin boundary mobility on domain microstructure evolution in magnetic shape memory alloys: Phase field simulation

Effects of twin boundary mobility on domain microstructure evolution during magnetic field-induced deformation in magnetic shape memory alloys are studied by phase field micromagnetic microelastic modeling. The simulations show that different twin boundary mobilities lead to drastically different domain microstructures and evolution pathways, yielding very different magnetization and strain responses, even with opposite signs. The study also reveals complex domain phenomena in magnetic shape memory alloys.

36 MATERIALS SCIENCE↗

Simulating the effect of aluminizing on a CoNiCrAlY-coated Ni-base superalloy

MCrAlY (M = Ni, Co) coatings are commonly used on gas-turbine components as oxidation resistant overlay coatings and bondcoats for thermal barrier systems. Here, we focus on the effect of the aluminizing process on the CoNiCrAlY coating microstructure. In the as-received condition the outer part of the coating consisted mostly of β-(Ni,Co)Al with interspersed precipitates of Cr-rich carbide and Cr-rich boride precipitates. Formation of σ-CoCr was observed at the interface between the β-layer and the inner initial CoNiCrAlY microstructure. Scanning electron microscopy (SEM) combined with energy and wavelength-dispersive X-ray spectroscopy (EDX/WDX) was employed to characterize the aluminized CoNiCrAlY coating. Phases were then identified by electron backscatter diffraction (EBSD). Detailed microstructural studies of the coating were corroborated with the help of coupled thermodynamic-kinetic calculations to model the aluminizing process. The calculations were performed with the in-house developed code employing the commercially available thermodynamic and kinetic databases (ThermoCalc). The mechanisms of the observed microstructural changes were elucidated with the help of the modelling donclusions.

36 MATERIALS SCIENCE↗

Assessment of NASA Dual Microstructure Heat Treatment Method Utilizing Ladis SuperCooler(trademark) Cooling Technology

The intent of this investigation was to demonstrate the NASA DMHT method with a tailored Ladish SuperCool(Trademark) cooling method on a Rolls-Royce AE2100, stage 3 disk shape. One disk each of two alloys, LSHR and ME3, were successfully converted as shown by macrostructure. DMHT heating time selection and cooling rate was aided by finite element modeling analysis. Residual stresses were also predicted and reported. Detailed microstructural analysis was performed by NASA and included in this report. Mechanical property characterization, also planned by NASA, is incomplete at this time and not part of this report.

Lemsky, Joe↗