Search NASA⌕ Search

SEARCH · Search NASA

Results for “physical samples”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,639 records · Page 91

PROTOPLANETARY DISK STRUCTURES IN OPHIUCHUS

We present the results of a high angular resolution (0.''3 {approx} 40 AU) Submillimeter Array survey of the 345 GHz (870 {mu}m) thermal continuum emission from nine of the brightest, and therefore most massive, circumstellar disks in the {approx}1 Myr-old Ophiuchus star-forming region. Using two-dimensional radiative transfer calculations, we simultaneously fit the observed continuum visibilities and broadband spectral energy distribution for each disk with a parametric structure model. Compared to previous millimeter studies, this survey includes significant upgrades in modeling, data quality, and angular resolution that provide improved constraints on key structure parameters, particularly those that characterize the spatial distribution of mass in the disks. In the context of a surface density profile motivated by similarity solutions for viscous accretion disks, {sigma} {proportional_to} (R/R{sub c} ){sup -{gamma}}exp [ - (R/R{sub c} ){sup 2-{gamma}}], the best-fit models for the sample disks have characteristic radii R{sub c} {approx} 20-200 AU, high disk masses M{sub d} {approx} 0.005-0.14 M {sub sun} (a sample selection bias), and a narrow range of radial {sigma} gradients ({gamma} {approx} 0.4-1.0) around a median {gamma} = 0.9. These density structures are used in conjunction with accretion rate estimates from the literature to help characterize the viscous evolution of the disk material. Using the standard prescription for disk viscosities, those combined constraints indicate that {alpha} {approx} 0.0005-0.08. Three of the sample disks show large (R {approx} 20-40 AU) central cavities in their continuum emission morphologies, marking extensive zones where dust has been physically removed and/or has significantly diminished opacities. Based on the current requirements of planet formation models, these emission cavities and the structure constraints for the sample as a whole suggest that these young disks may eventually produce planetary systems, and have perhaps already started.

99 GENERAL AND MISCELLANEOUS↗

Characterization of the Insoluble Solids of the 241-17F and 241-49H Pump house Water Sample

Six different water samples from 241-17F and 241-49H pump house were analyzed for chemical and physical characteristics as part of efforts to understand recent mechanical seal failures associated with four new cooling water pumps. A focus of this work was characterization of any “as found” insoluble solids. The insoluble material found in the FCRW (F-Area caustic water treated with sodium chromate at 241-17F) sample are mostly magnetite (Fe3O4 or possibly equipment rust) and silica. It was found that 26% of measured FCRW particles have at least one dimension larger than 15 microns. The insoluble particles found in the source water, domestic water (FDW), are mostly kaolin (aluminosilicate) and some iron oxide. All found FDW particles were larger than 15 microns. The insoluble particles of the other source water, FArea well water (FWW), were mostly iron oxide with some trapped cations like calcium. Only 8% of found FWW particles were bigger than 15 microns.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Machine‐Learning‐Driven Exploration of Surface Reconstructions of Reduced Rutile TiO 2

Titanium dioxide (TiO 2 ) is widely used as a catalyst support due to its stability, tunable electronic properties, and surface oxygen vacancies, which are crucial for catalytic processes such as the reverse water-gas shift (RWGS) reaction. Reduced TiO 2 surfaces undergo complex surface reconstructions that endow unique properties but are computationally challenging to describe. In this study, we utilize machine-learning interatomic potentials (MLIPs) integrated with an active-learning workflow to efficiently explore reduced rutile TiO 2 surfaces. This approach enabled the prediction of a phase diagram as a function of oxygen chemical potential, revealing a variety of reconstructed phases, including a previously unreported subsurface shear plane structure. We further investigate the electronic properties of these surfaces and validate our results by comparing experimental and theoretical high-resolution transmission electron microscopy (HRTEM). Our findings provide new insights into how extreme surface reductions influence the structural and electronic properties of TiO 2 , with potential implications for catalyst design.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Magnetic and Transport Properties of Bi{sub 0.5−x}Pr{sub x}Ca{sub 0.5}MnO{sub 3}(0.0 ≤ x ≤ 0.50) Manganites

In this work, the effect of Pr doping at the Bi site on the critical behavior and magnetocaloric and transport properties of Bi{sub 0.5−x}Pr{sub x}Ca{sub 0.5}MnO{sub 3} (0.0 ≤ x ≤ 0.50) manganite synthesized by sol–gel method is reported. An increase in Curie temperature (T{sub C}) with an increase in Pr content is observed. The samples with x = 0.0–0.40 show first-order phase transition whereas the sample with x = 0.50 shows second-order phase transition near T{sub C}. The estimated values of critical exponents β = 0.75 and γ = 0.82 for the sample with x = 0.50 do not fall into any universality class. The sample with x = 0.50 shows maximum magnetic entropy change (|ΔS{sub m}| = (1.22 J kg{sup −1} K{sup −1}) at T{sub C} in an applied magnetic field of 40 kOe, which is associated with magnetocaloric effect (MCE). All the samples show semiconducting behavior and also follow Mott’s variable range hopping (VRH) model below the charge ordering temperature (T{sub CO}). The changes in magnetic and transport properties are correlated with the changes in the structural parameters of the samples. The results are discussed in view of the effect of Pr doping on the 6s{sup 2} lone pair character of Bi{sup 3+} ions and disorder in the samples.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Influence of Thickness on the Structural, Optical and Magnetic Properties of Bismuth Ferrite Thin Films

In this paper, the effect of thickness on the structural, optical, and magnetic properties of the BiFeO{sub 3} (BFO) thin films formed on a glass substrate by the chemical solution deposition has been studied. The sol-gel method combined by the spin-coating technique is used to fabricate BFO thin films. The XRD analysis indicated that BFO thin films had a rhombohedral perovskite structure. Polycrystallinity, smooth and compact surface morphology, and uniform size distribution, as well as average thickness of layers, were observed in FESEM images. UV-vis spectra showed that the absorption coefficient and energy bandgap increased by increasing the thickness of films. VSM measurements indicated that the thin films showed a behavior between weak ferromagnetic and anti-ferromagnetism for all samples.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Column separation of tetravalent cerium fission products from trivalent rare earth radio-isotopes

Rapid and efficient isolation of individual rare earth element (REE) radioisotopes from complex mixtures is necessary to support the fields of nuclear forensics, medical isotope production and nuclear physics measurements. The separations must be robust and generate sufficiently high purity samples for subsequent radiological analysis. Current methodologies utilize a laborious two step Ce(IV)-iodate precipitation followed by Ce(IV)-nitrate di-(2-ethylhexyl)phosphoric acid/n-heptane extraction. This work reports an alternative method to isolate Ce fission product isotopes equilibrated with milligrams of cold carrier, from the remaining REE’s using a Ce(IV)/LN-resin (Eichrom Technologies) based separation. Optimization of Ce(IV) loading, REE(III) elution volume and subsequent Ce(III) stripping step utilized 166m Ho tracer. Mixed fission product experiments provided a further test of this LN-resin method, with analysis of purified 141/144 Ce, 147 Nd and 91 Y. Overall, while decontamination factors were lower for the LN-resin method, (vs. the combined precipitation/extraction) the simplicity of the technique and the satisfactory fission product analysis results point to the efficacy of this method.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Voltammetric determination of vitamin B{sub 6} (pyridoxine) at a graphite screen-printed electrode modified with graphene oxide/Fe{sub 3}O{sub 4}@SiO{sub 2} nanocomposite

The preparation and study of electrochemical properties of a graphite screen-printed electrode (SPE) modified with the GO/Fe{sub 3}O{sub 4}@SiO{sub 2} (GO is graphene oxide) nanocomposites are described. The morphologies of the GO/Fe{sub 3}O{sub 4}@SiO{sub 2} nanocomposites were examined by scanning electron microscopy. The electrochemical oxidation of vitamin B{sub 6} (pyridoxine) on SPE modified with the GO/Fe{sub 3}O{sub 4}@SiO{sub 2} nanocomposite was investigated by cyclic voltammetry, differential pulse voltammetry, and chronoamperometry. Under optimum conditions (pH 7.0), the vitamin B{sub 6} oxidation at the surface of the modified SPE occurs at a potential about 190 mV less positive than that at the unmodified SPE. A linear voltammetric response for vitamin B{sub 6} was obtained in the concentration range 1.0•10 {sup 6}—9.0•10 {sup 4} mol L{sup –1} with a detection limit of 5.2•10 {sup 7} mol L{sup –1} using differential pulse voltammetry. The developed sensor was also successfully applied for determination of trace level of vitamin B{sub 6} in both the standard vitamin B{sub 6} sample and biological samples (urine).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A pectin methyltransferase modulates polysaccharide dynamics and interactions in Arabidopsis primary cell walls: Evidence from solid-state NMR

Plant cell walls contain cellulose embedded in matrix polysaccharides. Understanding carbohydrate structures and interactions is critical to the production of biofuel and biomaterials using these natural resources. Here we present a solid-state NMR study of cellulose and pectin in 13 C-labeled cell walls of Arabidopsis wild-type and mutant plants. Using 1D 13 C and 2D 13 C– 13 C correlation experiments, we detected a highly branched arabinan structure in qua2 and tsd2 samples, two allelic mutants for a pectin methyltransferase. Both mutants show close physical association between cellulose and the backbones of pectic homogalacturonan and rhamnogalacturonan-I. Relaxation and dipolar order parameters revealed enhanced microsecond dynamics due to polymer disorder in the mutants, but restricted motional amplitudes due to tighter pectin-cellulose associations. These molecular data shed light on polymer structure and packing in these two pectin mutants, helping to elucidate how pectin could influence cell wall architecture at the nanoscale, cell wall mechanics, and plant growth.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A parametric approach to identify synergistic domains of process intensification for reactive separation

Process intensification aims to combine multiple tasks within multi-functional units to drastically improve economic, energy or sustainability metrics of a chemical process. Limited work exists to systematically identify the synergistic domains where intensification outperforms its nonintensified counterpart. In this work, we computationally derive the synergistic domains of a reactive separation system. Specifically, we first postulate general models for both intensified and nonintensified systems. We use these models to generate data to train a ReLU-type artifical neural network (ANN). Further, the trained ReLU-NN model is formulated as a multi-parametric mixed-integer linear program (mp-MILP), and the critical regions of this mp-MILP define the synergistic feasible domains of intensification. We have derived these synergistic domains of vapor–liquid equilibrium (VLE)-based reactive separation for several industrial applications. These synergistic domains enable quick screening of properties that favor intensification.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Detection of rare earth elements in Powder River Basin sub-bituminous coal ash using laser-induced breakdown spectroscopy (LIBS)

We reported our preliminary results on the use of laser-induced breakdown spectroscopy to analyze the rare earth elements contained in ash samples from Powder River Basin sub-bituminous coal (PRB-coal). We have identified many elements in the lanthanide series (cerium, europium, holmium, lanthanum, lutetium, praseodymium, promethium, samarium, terbium, ytterbium) and some elements in the actinide series (actinium, thorium, uranium, plutonium, berkelium, californium) in the ash samples. In addition, various metals were also seen to present in the ash samples

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Chromium incorporation into TiO{sub 2} at high pressure

Chromium incorporation into TiO{sub 2} up to 3 GPa at 1300 Degree-Sign C and 900 Degree-Sign C has been studied by XRD as well as TEM. A CaCl{sub 2} type TiO{sub 2} polymorph has been observed in the quenched samples from high pressure. Two different mechanisms of solubility occur in the recovered samples. Chromium replaces titanium on normal octahedral sites but it also occupies interstitial octahedral sites, especially in the samples recovered from higher pressures. Interstitial chromium is responsible for an orthorhombic distortion of the TiO{sub 2} rutile structure in the quenched samples and gives rise to a (1 1 0) twinned CaCl{sub 2}-structured polymorph. This phase is very likely the result of temperature quench at high pressure. The formation of this phase is directly related to the chromium content of the TiO{sub 2} grains. Chromium solubility in TiO{sub 2} increases with increasing the synthesis pressure. TiO{sub 2} is able to accommodate up to 15.3 wt% Cr{sub 2}O{sub 3} at 3 GPa and 1300 Degree-Sign C, compared to 5.7 wt% at atmospheric pressure at the same temperature. - Graphical abstract: Microstructure consisting of twins domains of recovered Cr-doped CaCl{sub 2} type TiO{sub 2} grains synthesised at high pressure. Highlights: Black-Right-Pointing-Pointer Chromium solubility in TiO{sub 2} increases at high pressure. Black-Right-Pointing-Pointer Chromium occupies substitutional and interstitial positions in the rutile structure. Black-Right-Pointing-Pointer Interstitial chromium causes a decrease of the rutile symmetry. Black-Right-Pointing-Pointer An orthorhombic CaCl{sub 2} type structure is observed in the quenched samples.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A detailed investigation on the impact of post-growth annealing on the materials and device characteristics of 35-layer In{sub 0.50}Ga{sub 0.50}As/GaAs quantum dot infrared photodetector with quaternary In{sub 0.21}Al{sub 0.21}Ga{sub 0.58}As capping

Highlights: ► We investigated the effect of ex situ annealing on InGaAs/GaAs QDIP with InAlGaAs layer. ► As-grown defect was removed by using post-growth annealing treatment. ► Increase in the compressive strain due to annealing is calculated from XRD curve. ► Three-fold enhancement in responsivity is observed in the QDIPs annealed at 650 °C. ► Two-fold enhancement in D* is observed sample annealed at 650 °C compared to as grown. -- Abstract: The effect of post-growth rapid thermal annealing on 35-layer In{sub 0.50}Ga{sub 0.50}As/GaAs quantum dot infrared photodetector (QDIP) with quaternary In{sub 0.21}Al{sub 0.21}Ga{sub 0.58}As capping has been investigated. Transmission electron microscopy showed some as-grown defects were removed by post growth annealing treatment. An increase in the compressive strain in the heterostructure due to annealing was identified from X-ray diffraction curve. A two-color photoresponse in the long-wave region (8.5 and 10.2 μm) was observed in both as-grown device and those annealed at 650 °C temperature. A three-fold enhancement in peak responsivity was observed in the QDIPs annealed at 650 °C (1.19 A/W) compared to that in the as-grown (0.34 A/W). Detectivity also increased by two fold from as-grown to 650 °C annealed device. The changes are attributed to the removal of as-grown defects and dislocations during epitaxial growth. These removals changed the confinement potential profile, which resulted in an improvement in the detectivity and responsivity of the annealed sample.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Modeling the effect of laser heating on the strength and failure of 7075-T6 aluminum

The effect of rapid laser heating on the response of 7075-T6 aluminum has been characterized using 3-D digital image correlation and a series of thermocouples. The experimental results indicate that as the samples are held under a constant load, the heating from the laser profile causes non-uniform temperature and strain fields, and the strain-rate increases dramatically as the sample nears failure. Simulations have been conducted using the LLNL multi-physics code ALE3D, and compared to the experiments. The strength and failure of the material was modeled using the Johnson–Cook strength and damage models. Here, in order to capture the response, a dual-condition criterion was utilized which calibrated one set of parameters to low temperature quasi-static strain rate data, while the other parameter set is calibrated to high temperature high strain rate data. The thermal effects were captured using temperature dependent thermal constants and invoking thermal transport with conduction, convection, and thermal radiation.

36 MATERIALS SCIENCE↗

Probabilistic Deep Learning Approach to Automate the Interpretation of Multi-phase Diffraction Spectra

Autonomous synthesis and characterization of inorganic materials requires the automatic and accurate analysis of X-ray diffraction spectra. For this task, we designed a probabilistic deep learning algorithm to identify complex multi-phase mixtures. At the core of this algorithm lies an ensemble convolutional neural network trained on simulated diffraction spectra, which are systematically augmented with physics-informed perturbations to account for artifacts that can arise during experimental sample preparation and synthesis. In this work, larger perturbations associated with off-stoichiometry are also captured by supplementing the training set with hypothetical solid solutions. Spectra containing mixtures of materials are analyzed with a newly developed branching algorithm that utilizes the probabilistic nature of the neural network to explore suspected mixtures and identify the set of phases that maximize confidence in the prediction. Our model is benchmarked on simulated and experimentally measured diffraction spectra, showing exceptional performance with accuracies exceeding those given by previously reported methods based on profile matching and deep learning. We envision that the algorithm presented here may be integrated in experimental workflows to facilitate the high-throughput and autonomous discovery of inorganic materials.

36 MATERIALS SCIENCE↗

Nickel Sulfide-Nanowire-Filled Carbon Nanotubes as an Efficient Overall Water Splitting Electrocatalyst

Pursuing stable, efficient, and cost-effective nanostructured bifunctional electrocatalysts is crucial for advancing the electrochemical water splitting process and enabling clean hydrogen energy production. In recent years, considerable efforts have focused on developing highly efficient and durable commercial electrocatalysts for the oxygen evolution reaction (OER) and overall water splitting (OWS). This research introduces an OWS electrocatalyst-nickel sulfide-filled carbon nanotubes grown on a carbon cloth substrate (Ni 3 S 2 @CNTs/CC), synthesized via a one-step in-situ process. The synergistic integration of metal sulfide (Ni 3 S 2 ) and carbon nanotubes provides abundant active sites for catalytic reactions, ensuring a robust composite nanostructure with enhanced durability. Furthermore, the electrocatalytic performance for OER and OWS has been significantly improved by a simple acid treatment to the electrocatalysts, which introduces physical and chemical defects, particularly oxygen functional groups (the acid-treated sample is termed as Ni 3 S 2 @CNTs/CC-AT). As OER electrocatalysts, Ni 3 S 2 @CNTs/CC and Ni 3 S 2 @CNTs/CC-AT present overpotentials of 304 and 200 mV, respectively, for achieving a current density of 10 mA/cm 2 in the OER process. Furthermore, for complete water splitting in 1.0 M KOH electrolyte, Ni 3 S 2 @CNTs/CC and Ni 3 S 2 @CNTs/CC-AT exhibit potentials of 1.63 and 1.44 V, respectively, to achieve a current density of 10 mA/cm 2 when employed as both anode and cathode. Moreover, Ni 3 S 2 @CNTs/CC and Ni 3 S 2 @CNTs/CC-AT demonstrate durable nature for 22 and 20 h durability in the OER and OWS processes, respectively, offering a promising alternative to ruthenium- and iridium-based electrocatalysts for electrochemical hydrogen production through water splitting. In conclusion, the in-situ synthesis method and acid treatment strategy described in this research are promising approaches to fabricating high-performance encapsulated carbon-nanotube-based electrocatalysts.

36 MATERIALS SCIENCE↗

Dynamic behavior of reversible oxygen migration in irradiated-annealed high temperature superconducting wires

Large-scale extrusion-based additive manufacturing of high-performance thermoplastic composites like fiber reinforced polyphenylene sulfide (PPS) is well-suited for tooling applications to lower manufacturing costs and lead times. Autoclave tooling requires good mechanical performance at temperatures even above the glass transition temperature (T g ). In this work, the authors have investigated a post-process isothermal annealing technique to improve the mechanical properties of various grades of carbon fiber reinforced PPS components printed on the Big Area Additive Manufacturing (BAAM) system. Since PPS is a semi-crystalline polymer, crystallinity can change during annealing and affect the mechanical properties of the part. In addition, isothermal annealing can also lead to solid-state structural changes in the form of thermal and oxidative branching and/or crosslinking reactions in some grades of PPS which can alter the crystallization process. This work reports the effect of annealing on dynamic mechanical properties of BAAM printed components, along with studies to determine the effect of annealing on crystallinity and the occurrence of oxidative reactions. Results showed that isothermal annealing at 250 °C for 18 h improved the storage modulus of all selected grades (neat and reinforced) of PPS at temperatures above T g . Annealing led to an overall increase in the degree of crystallinity, with secondary crystallization taking place. Although oxidative structural changes were observed to occur more on the surface of the PPS parts, they primarily influenced the size of crystals formed and did not significantly alter the degree of crystallinity at various regions within the sample.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The impact of environment on size: Galaxies are 50% smaller in the Fornax Cluster compared to the field

Size is a fundamental parameter for measuring the growth of galaxies and the role of the environment on their evolution. However, the conventional size definitions used for this purpose are often biased and miss the diffuse, outermost signatures of galaxy growth, including star formation and gas accretion. We address this issue by examining low surface brightness truncations or galaxy ‘edges’ as a physically motivated tracer of size based on star formation thresholds. Our total sample consists of ∼900 galaxies with stellar masses ranging from 10 5 M ⊙ < M ⋆ < 10 11 M ⊙ . This sample of nearby cluster, group satellite, and nearly isolated field galaxies was compiled using multi-band imaging from the Fornax Deep Survey, deep IAC Stripe 82, and Dark Energy Camera Legacy Surveys. We find that the edge radii scale as R edge ∝ M ⋆ 0.42 , with a very small intrinsic scatter (∼0.07 dex). The scatter is driven by the morphology and environment of galaxies. In both the cluster and field, early-type dwarfs are systematically smaller by approximately 20% compared to late-type dwarfs. However, galaxies in the Fornax cluster are the most impacted. At a fixed stellar mass, edges in the cluster can be found at about 50% smaller radii, and the average stellar surface density at the edges is a factor of two higher, ∼1 M ⊙ /pc 2 . Our findings support the rapid removal of loosely bound neutral hydrogen (H I ) in hot, crowded environments, which truncates galaxies outside-in earlier, preventing the formation of more extended sizes and lower density edges. Our results highlight the importance of deep imaging surveys to the study of low surface brightness imprints of the large-scale structure and environment on galaxy evolution.

Astronomy & Astrophysics↗

Diboson production

Measurements of diboson production cross sections in pp collisions at the LHC at a centre of mass energy &radics = 7 and 8 TeV, and in pp&#773collisions at the Tevatron at &radics = 1.96 TeV are reviewed and compared with standard model predictions. Limits on charged and neutral anomalous triple gauge couplings extracted from the selected diboson event samples are also compared.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗