Search NASA⌕ Search

SEARCH · Search NASA

Results for “process analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,639 records · Page 91

Elucidating regulatory processes of intense physical activity by multi-omics analysis

Abstract Background Physiological and biochemical processes across tissues of the body are regulated in response to the high demands of intense physical activity in several occupations, such as firefighting, law enforcement, military, and sports. A better understanding of such processes can ultimately help improve human performance and prevent illnesses in the work environment. Methods To study regulatory processes in intense physical activity simulating real-life conditions, we performed a multi-omics analysis of three biofluids (blood plasma, urine, and saliva) collected from 11 wildland firefighters before and after a 45 min, intense exercise regimen. Omics profiles post- versus pre-exercise were compared by Student’s t -test followed by pathway analysis and comparison between the different omics modalities. Results Our multi-omics analysis identified and quantified 3835 proteins, 730 lipids and 182 metabolites combining the 3 different types of samples. The blood plasma analysis revealed signatures of tissue damage and acute repair response accompanied by enhanced carbon metabolism to meet energy demands. The urine analysis showed a strong, concomitant regulation of 6 out of 8 identified proteins from the renin-angiotensin system supporting increased excretion of catabolites, reabsorption of nutrients and maintenance of fluid balance. In saliva, we observed a decrease in 3 pro-inflammatory cytokines and an increase in 8 antimicrobial peptides. A systematic literature review identified 6 papers that support an altered susceptibility to respiratory infection. Conclusion This study shows simultaneous regulatory signatures in biofluids indicative of homeostatic maintenance during intense physical activity with possible effects on increased infection susceptibility, suggesting that caution against respiratory diseases could benefit workers on highly physical demanding jobs.

59 BASIC BIOLOGICAL SCIENCES↗

Characterization of the Crab Pulsar's Timing Noise

We present a power spectral analysis of the Crab pulsar's timing noise, mainly using radio measurements from Jodrell Bank taken over the period 1982-1989, an interval bounded by sparse data sampling and a large glitch. The power spectral analysis is complicated by nonuniform data sampling and the presence of a steep red power spectrum that can distort power spectra measurement by causing severe power 'leakage'. We develop a simple windowing method for computing red noise power spectra of uniformly sampled data sets and test it on Monte Carlo generated sample realizations of red power-law noise. We generalize time-domain methods of generating power-law red noise with even integer spectral indices to the case of noninteger spectral indices. The Jodrell Bank pulse phase residuals are dense and smooth enough that an interpolation onto a uniform time series is possible. A windowed power spectrum is computed revealing a periodic or nearly periodic component with a period of 568 +/- 10 days and a l/f(exp 3) power-law noise component in pulse phase with a noise strength S(sub infinity)=(1.24 +/- 0.067) x 10(exp 16) cycles(exp 2)/sec(exp 2) over the analysis frequency range f=0.003- 0.1 cycles/day. This result deviates from past analyses which characterized the pulse phase timing residuals as either l/f(sub 4) power-law noise or a quasiperiodic process. The analysis was checked using the Deeter polynomial method of power spectrum estimation that was developed for the case of nonuniform sampling, but has lower spectral resolution. The timing noise is consistent with a torque noise spectrum rising with analysis frequency as f implying blue torque noise, a result not predicted by current models of pulsar timing noise. If the periodic or nearly periodic component is due to a binary companion, we find a mass function f(M) = (6.8 +/- 2.4) x 10(exp -16) solar mass and a companion mass, M(sub c) is greater than or equal to 3.2 solar mass assuming a Crab pulsar mass of 1.4 solar mass.

Scott, D. M.↗

Investigation of Friction Stir Welding of Al Metal Matrix Composite Materials

The innovative process of Friction Stir Welding (FSW) has generated tremendous interest since its inception about a decade or so ago since the first patent in 1991 by TWI of Cambridge, England. This interest has been seen in many recent international conferences and publications on the subject and relevant published literature. Still the process needs both intensive basic study of deformation mechanisms during this FSW process and analysis and feasibility study to evaluate production methods that will yield high quality strong welds from the stirring action of the appropriate pin tool into the weld plate materials. Development of production processes is a complex task that involves effects of material thickness, materials weldability, pin tool design, pin height, and pin shoulder diameter and related control conditions. The frictional heating with rotational speeds of the pin tool as it plunges into the material and the ensuing plastic flow arising during the traverse of the welding faying surfaces provide the known special advantages of the FSW process in the area of this new advanced joining technology.

Diwan, Ravinder M.↗

Cluster Analysis of IRIS Spectroscopic Line Profiles and SDO/AIA EUV Emission in Observations and RMHD Simulations of the Solar Atmosphere

Spatially-resolved observations from the IRIS and SDO/AIA satellites, especially when coupled with realistic 3D RMHD simulations, are a powerful tool for analysis of processes in the solar chromosphere, transition region, and corona. However, the complexity of the data makes understanding the observations and modeling results difficult. In this work, we apply unsupervised clustering algorithms for analysis of observational and synthetic chromospheric Mg II h&k 2796Å&2803Å and transition region C II 1334Å&1335Å line profiles observed by IRIS, and extreme ultraviolet (EUV) emission observed by SDO/AIA, for various types of problems. The synthetic line profiles are computed for simulations of the quiescent solar atmosphere (using the StellarBox and RH1.5 codes). The K-Means clustering algorithm is applied, and the selection of an optimal number of clusters is supported by the average silhouette width technique. We discuss applications of the line profile clustering method to 1) visualization of computational and observational spectroscopic imaging data; 2) understanding of evolutionary trends and behavior patterns of quiet Sun emission and during solar flares; and 3) recognition of heating events and shock waves.

Sadykov, Viacheslav↗

Land-Focused Changes in the Updated GEOS FP System (Version 5.25)

Many of the changes imposed in the January 2020 upgrade from Version 5.22 to 5.25 of the Goddard Earth Observing System (GEOS) Forward Processing (FP) analysis system were designed to increase the realism of simulated land variables. The changes, which consist of both land model parameter updates and improvements to the physical treatments employed for various land processes, have generally positive or neutral impacts on the character of the FP product, as documented here.

Koster, Randal D.↗

Parameter-induced stochastic resonance based on spectral entropy and its application to weak signal detection

The parameter-induced stochastic resonance based on spectral entropy (PSRSE) method is introduced for the detection of a very weak signal in the presence of strong noise. The effect of stochastic resonance on the detection is optimized using parameters obtained in spectral entropy analysis. Upon processing employing the PSRSE method, the amplitude of the weak signal is enhanced and the noise power is reduced, so that the frequency of the signal can be estimated with greater precision through spectral analysis. While the improvement in the signal-to-noise ratio is similar to that obtained using the Duffing oscillator algorithm, the computational cost reduces from O(N{sup 2}) to O(N). The PSRSE approach is applied to the frequency measurement of a weak signal made by a vortex flow meter. The results are compared with those obtained applying the Duffing oscillator algorithm.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Microscale isoelectric fractionation using immobilized pH-specific membranes for multi-dimensional analysis.

We report on advancements of our microscale isoelectric fractionation ({mu}IEFr) methodology for fast on-chip separation and concentration of proteins based on their isoelectric points (pI). We establish that proteins can be fractionated depending on posttranslational modifications into different pH specific bins, from where they can be efficiently transferred to downstream membranes for additional processing and analysis. This technology can enable on-chip multidimensional glycoproteomics analysis, as a new approach to expedite biomarker identification and verification.

59 BASIC BIOLOGICAL SCIENCES↗

The Policy Formation Process: A Conceptual Framework for Analysis

A conceptual framework for analysis which is intended to assist both the policy analyst and the policy researcher in their empirical investigations into policy phenomena is developed. It is meant to facilitate understanding of the policy formation process by focusing attention on the basic forces shaping the main features of policy formation as a dynamic social-political-organizational process. The primary contribution of the framework lies in its capability to suggest useful ways of looking at policy formation reality. It provides the analyst and the researcher with a group of indicators which suggest where to look and what to look for when attempting to analyze and understand the mix of forces which energize, maintain, and direct the operation of strategic level policy systems. The framework also highlights interconnections, linkage, and relational patterns between and among important variables. The framework offers an integrated set of conceptual tools which facilitate understanding of and research on the complex and dynamic set of variables which interact in any major strategic level policy formation process.

Fuchs, E. F.↗

MeDICi Software Superglue for Data Analysis Pipelines

The Middleware for Data-Intensive Computing (MeDICi) Integration Framework is an integrated middleware platform developed to solve data analysis and processing needs of scientists across many domains. MeDICi is scalable, easily modified, and robust to multiple languages, protocols, and hardware platforms, and in use today by PNNL scientists for bioinformatics, power grid failure analysis, and text analysis.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗

Wildfire Emergency Response Hazard Extraction and Analysis of Trends (HEAT) through Natural Language Processing and Time Series

A methodology for Hazard Extraction and Analysis of Trends (HEAT) is proposed and conducted on a data set of wildfire incident response forms, known as ICS-209-PLUS.The HEAT processes: (1) extract a set of hazards from a data set, (2) calculate hazard-relevant metrics in a primary analysis, (3) analyze trends over time in metrics using timeseries, and (4) examine potential explanations for metric trends using a secondary analysis. Hazards are extracted from narrative data in the ICS-209-PLUS based on a framework previously developed by the authors, using natural language processing. Metrics examined for each hazard include operational time to occurrence, rate of occurrence, frequency, and severity. Primary results include a taxonomy of hazards present in the data set with relevant quantitative metrics. The most frequent hazards identified are environmental and include hazardous terrain. Most hazards occur on average between 35-55% containment. Incidents with hazards tend to have a higher average severity score when compared to the average score for all incidents. Time series of the metrics and relevant predictors, including fire characteristics, fire intensity, and operations, are created to facilitate further analysis. Secondary results used to determine which factors best predict hazard frequency include a correlation matrix and regression analysis. These findings are relevant to safety for current, as well as emerging wildfire operations, and are an exploratory first step in developing historical data-driven risk assessment models.

Sequoia R. Andrade↗

An analysis of bulk data movement patterns in large-scale scientific collaborations

Large-scale research efforts such as LHC experiments, ITER, and climate modelling are built upon large, globally distributed collaborations. For reasons of scalability and agility and to make effective use of existing computing resources, data processing and analysis for these projects is based on distributed computing models. Such projects thus depend on predictable and efficient bulk data movement between collaboration sites. However, the available computing and networking resources to different collaboration sites vary greatly. Large collaboration sites (such as Fermilab, CERN) have created data centres comprising hundreds, and even thousands, of computation nodes to develop massively scaled, highly distributed cluster-computing platforms. These sites are usually well connected to outside worlds with high-speed networks with bandwidth greater than 10Gbps. On the other hand, some small collaboration sites have limited computing resources or poor networking connectivity. Therefore, the bulk data movements across collaboration sites vary greatly. Fermilab is the US-CMS Tier-1 Centre and the main data centre for a few other large-scale research collaborations. Scientific traffic (e.g., CMS) dominates the traffic volumes in both inbound and outbound directions of Fermilab off-site traffic. Fermilab has deployed a Flow-based network traffic collection and analysis system to monitor and analyze the status and patterns of bulk data movement between the Laboratory and its collaboration sites. In this paper, we discuss the current status and patterns of bulk data movement between Fermilab and its collaboration sites.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Preliminary results on the various U.V. straylight sources for the VWFC onboard SL 1

Technical difficulties encountered using the Very Wide Field Camera (VWFC) during the Spacelab 1 Shuttle mission are reported. The VWFC is a wide low resolution (5 arcmin half-half width) photographic camera, capable of operating in both spectrometric and photometric modes. The bandpasses of the photometric mode of the VWFC are defined by three Al + MgF2 interference filters. A piggy-back spectrograph attached to the VWFC was used for observations in the spectrometric mode. A total of 48 astronomical frames were obtained using the VWFC, of which only 20 were considered to be of adequate quality for astronomical data processing. Preliminary analysis of the 28 poor-quality images revealed the following possible defects in the VWFC: darkness in the spacing frames, twilight/dawn UV straylight, and internal UV straylight. Improvements in the VWFC astronomical data processing scheme are expected to help identify and eliminate UV straylight sources in the future.

Viton, M.↗

Utilization of GIS technology to support development of flow and contaminant fate and transport models at US DOE sites - 15457

U.S. Department of Energy (DOE) sites have accumulated years of data and millions of spatial and temporal records related to the hydrological cycle, contaminant transport, and parameters of remediation technologies. In addition, numerical models which use field monitoring data to help understand flow and transport produce gigabytes of computed spatial and temporal data for each computation node. There is a need therefore for an advanced spatial data structure that can be used to address the management, processing, and analysis of spatial and temporal numerical modeling data derived from multiple sources. This can be accomplished using a geo-database. The development of an ArcSDE geo-database facilitates the centralized storage, backup, accessibility, organization, and management of model configuration and computed simulation data, putting it into a structured, coherent, and logical computer-supported system. GIS data processing and automation would enable faster and hence more complex analyses of field test data. The Applied Research Center (ARC) at Florida International University (FIU) has provided analysis of flow and transport for several watersheds at DOE's Oak Ridge Reservation (ORR), including East Fork Poplar Creek (EFPC), Upper EFPC in the Y-12 National Security Complex area (Y-12 NSC) and White Oak Creek (WOC). Integrated surface and subsurface flow, fate and transport models were developed to provide analysis of contaminant patterns within each watershed. In addition, digital monitoring data available from the Oak Ridge Environmental Information System (OREIS) related to mercury (Hg) contamination and remediation within these watersheds was used for calibration and verification of the model. Experimental studies were also carried out which provided kinetic and equilibrium data about important parameters related to Hg transport, speciation and methylation/demethylation kinetics within the watershed. Geographic Information Systems (GIS) technology was employed to support the modeling work through storage and geo-processing of spatial and temporal data required by the models and to produce hydrogeological maps for visualization. An ArcGIS geo-database was developed for centralized storage and management of experimental and computed model data and its capabilities were extended over the years using tools such as ModelBuilder combined with Python scripting to automate repetitive tasks, perform statistical analyses and generate maps and reports. The hydrologic geo-database model developed possesses a structure that enables linkage with scalable hydrologic modeling tools/applications to model hydrologic systems, and in this case, enables the testing of the potential impacts of various remediation scenarios on the ORR watersheds. The ArcSDE geo-database can also be used to automate and simplify the process of calling stored GIS and time series data. This geo-database can serve as a tool for contaminant flow and transport analyses which require large amounts of high-quality spatial and temporal data in order to ensure reliability and validity of modeling results. The existing geo-database structure developed for the hydrological modeling at ORR was designed to be replicable for application at other DOE sites. An investigation of downloadable free/open source GIS software along with required security protocols to facilitate online querying of the database was also conducted to determine methods by which project-derived data can be more easily shared with other project stakeholders such as DOE personnel and site contractors. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Automated x-ray/light field congruence using the LINAC EPID panel

Purpose: X-ray/light field alignment is a test described in many guidelines for the routine quality control of clinical linear accelerators (LINAC). Currently, the gold standard method for measuring alignment is through utilization of radiographic film. However, many modern LINACs are equipped with an electronic portal imaging device (EPID) that may be used to perform this test and thus subsequently reducing overall cost, processing, and analysis time, removing operator dependency and the requirement to sustain the departmental film processor. Methods: This work describes a novel method of utilizing the EPID together with a custom inhouse designed jig and automatic image processing software allowing measurement of the light field size, x-ray field size, and congruence between them. The authors present results of testing the method for aS1000 and aS500 Varian EPID detectors for six LINACs at a range of energies (6, 10, and 15 MV) in comparison with the results obtained from the use of radiographic film. Results: Reproducibility of the software in fully automatic operation under a range of operating conditions for a single image showed a congruence of 0.01 cm with a coefficient of variation of 0. Slight variation in congruence repeatability was noted through semiautomatic processing by four independent operators due to manual marking of positions on the jig. Testing of the methodology using the automatic method shows a high precision of 0.02 mm compared to a maximum of 0.06 mm determined by film processing. Intraindividual examination of operator measurements of congruence was shown to vary as much as 0.75 mm. Similar congruence measurements of 0.02 mm were also determined for a lower resolution EPID (aS500 model), after rescaling of the image to the aS1000 image size. Conclusions: The designed methodology was proven to be time efficient, cost effective, and at least as accurate as using the gold standard radiographic film. Additionally, congruence testing can be easily performed for all four cardinal gantry angles which can be difficult when using radiographic film. Therefore, the authors propose it can be used as an alternative to the radiographic film method allowing decommissioning of the film processor.

60 APPLIED LIFE SCIENCES↗

Using Automation to Improve the Flight Software Testing Process

One of the critical phases in the development of a spacecraft attitude control system (ACS) is the testing of its flight software. The testing (and test verification) of ACS flight software requires a mix of skills involving software, knowledge of attitude control, and attitude control hardware, data manipulation, and analysis. The process of analyzing and verifying flight software test results often creates a bottleneck which dictates the speed at which flight software verification can be conducted. In the development of the Microwave Anisotropy Probe (MAP) spacecraft ACS subsystem, an integrated design environment was used that included a MAP high fidelity (HiFi) simulation, a central database of spacecraft parameters, a script language for numeric and string processing, and plotting capability. In this integrated environment, it was possible to automate many of the steps involved in flight software testing, making the entire process more efficient and thorough than on previous missions. In this paper, we will compare the testing process used on MAP to that used on other missions. The software tools that were developed to automate testing and test verification will be discussed, including the ability to import and process test data, synchronize test data and automatically generate HiFi script files used for test verification, and an automated capability for generating comparison plots. A summary of the benefits of applying these test methods on MAP will be given. Finally, the paper will conclude with a discussion of re-use of the tools and techniques presented, and the ongoing effort to apply them to flight software testing of the Triana spacecraft ACS subsystem.

ODonnell, James R., Jr.↗

Effects of Defects Analysis and Sizing Framework for Efficient Design of Composite Structures

Design of large composite structures requires striking a balance between permitted flaw size,strength margins, weight, and production rate. Stringent requirements manufacturing flaws can result in a lightweight structure because the strength properties are assumed to be closer to pristine. However, these stringent requirements can lead to production delays due to increased inspection and rework needed during the layup and rejection of parts after cure. Conversely, permitting larger flaws can reduce production delays, but will likely result in a heavier structure due to increased conservatism needed to maintain acceptable structural margins. The tradeoff between these criteria can vary between different structures and material systems, so the balance between manufacturing and design requirements is always a moving target. Assessment of this tradeoff requires having the ability to quickly evaluate the impact of flaw size on strength margin across an entire structure for a large number of load cases. The approach taken in this work is to implement an effects of defects analysis and sizing framework within HyperX. HyperX performs optimization of composite structures; this capability has been enhanced to include structural flaw data in the margin of safety calculations performed during optimization. Both the flaw import process and analysis of flaws have been generalized such that any flaw type from any source can be considered. The resulting tool enables rapid assessment of the impact of defects both at a vehicle and part level.

Effects of defects↗

Effects of Defects Analysis and Sizing Framework for Efficient Design of Composite Structures

Design of large composite structures requires striking a balance between permitted flaw size,strength margins, weight, and production rate. Stringent requirements manufacturing flaws can result in a lightweight structure because the strength properties are assumed to be closer to pristine. However, these stringent requirements can lead to production delays due to increased inspection and rework needed during the layup and rejection of parts after cure. Conversely, permitting larger flaws can reduce production delays, but will likely result in a heavier structure due to increased conservatism needed to maintain acceptable structural margins. The tradeoff between these criteria can vary between different structures and material systems, so the balance between manufacturing and design requirements is always a moving target. Assessment of this tradeoff requires having the ability to quickly evaluate the impact of flaw size on strength margin across an entire structure for a large number of load cases. The approach taken in this work is to implement an effects of defects analysis and sizing framework within HyperX. HyperX performs optimization of composite structures; this capability has been enhanced to include structural flaw data in the margin of safety calculations performed during optimization. Both the flaw import process and analysis of flaws have been generalized such that any flaw type from any source can be considered. The resulting tool enables rapid assessment of the impact of defects both at a vehicle and part level.

Effects of defects↗

Advanced Simulation Capability for Environmental Management - Current Status and Phase II Demonstration Results - 13161

The U.S. Department of Energy (US DOE) Office of Environmental Management (EM), Office of Soil and Groundwater, is supporting development of the Advanced Simulation Capability for Environmental Management (ASCEM). ASCEM is a state-of-the-art scientific tool and approach for understanding and predicting contaminant fate and transport in natural and engineered systems. The modular and open source high-performance computing tool facilitates integrated approaches to modeling and site characterization that enable robust and standardized assessments of performance and risk for EM cleanup and closure activities. The ASCEM project continues to make significant progress in development of computer software capabilities with an emphasis on integration of capabilities in FY12. Capability development is occurring for both the Platform and Integrated Tool-sets and High-Performance Computing (HPC) Multi-process Simulator. The Platform capabilities provide the user interface and tools for end-to-end model development, starting with definition of the conceptual model, management of data for model input, model calibration and uncertainty analysis, and processing of model output, including visualization. The HPC capabilities target increased functionality of process model representations, tool-sets for interaction with Platform, and verification and model confidence testing. The Platform and HPC capabilities are being tested and evaluated for EM applications in a set of demonstrations as part of Site Applications Thrust Area activities. The Phase I demonstration focusing on individual capabilities of the initial tool-sets was completed in 2010. The Phase II demonstration completed in 2012 focused on showcasing integrated ASCEM capabilities. For Phase II, the Hanford Site deep vadose zone (BC Cribs) served as an application site for an end-to-end demonstration of capabilities, with emphasis on integration and linkages between the Platform and HPC components. Other demonstrations, addressing attenuation-based remedies at the Savannah River Site F Area and performance assessment for a representative waste tank, illustrate integration of linked ASCEM capabilities and initial integration efforts with tools from the Cementitious Barriers Partnership. (authors)

54 ENVIRONMENTAL SCIENCES↗