Search NASA⌕ Search

SEARCH · Search NASA

Results for “rough surface”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,639 records · Page 91

Interaction between laser radiation and metallic powder of 316L austenitic steel during selective laser melting

Highlights: • Single and multiple tracks on a loose bulk powder substrate were generated. • Understanding of the microstructure development during SLM was achieved. • Single tracks reveal a nearly symmetrical crystallography with elongated grains. • Multiple tracks show elongated grains perpendicular to the build direction. - Abstract: During selective laser melting (SLM), a complex heat state develops that leads to a characteristic crystallography and microstructure of the processed materials. Depending on the geometry of the processed part, most scan tracks of a new layer, so-called hatches, are located above a dense substrate or already solidified structures whereas others are located above loose powder. This is, inter alia, the case for overhanging structures. Attributable to the lower thermal conductivity of loose powder, temperature gradients and cooling rates of the melt pool differentiate in these areas, resulting in a different microstructural build-up. In this work, the microstructure and the crystallographic orientation of grade 316L austenitic stainless steel processed by SLM was investigated to understand the interaction between the laser radiation and the metallic powder during SLM-processing and to investigate the remelting of a track on a previous SLM-densified track. Single and multiple tracks on a loose bulk powder substrate, as well as single tracks on a dense substrate plate, were generated. A parameter study revealed that high energy densities are necessary to build continuous tracks on a loose bulk powder substrate. In addition, the amount of adhered particles, which are sintered on the fully melted and solidified tracks, is determined in comparison to the melted powder because the sintered particles strongly influence the surface roughness. To understand the microstructure development and, particularly, the influence of adjacent hatches during SLM-processing, investigations on the resulting microstructure and crystallographic orientation of a single track and two connected multiple tracks were carried out. During SLM processing of the tracks, the substrate plate and the solidified structures influence the temperature gradient and cooling rate of the melt pool, thus directionally solidified and elongated grains occur. Furthermore, the solidification is characterized by an epitaxial growth due to a distinct thermal gradient between the melt pool and the surrounding elements.

36 MATERIALS SCIENCE↗

Interfacial and electrical properties of SrBi{sub 2}Ta{sub 2}O{sub 9}/ZrO{sub 2}/Si heterostructures for ferroelectric memory devices

We have investigated the interfacial and frequency dependent electrical properties of metal-ferroelectric-insulator-semiconductor capacitors with SrBi{sub 2}Ta{sub 2}O{sub 9} (SBT) ferroelectric films grown on ZrO{sub 2} buffer layer coated Si. Heterostructure SBT and ZrO{sub 2} thin films were deposited using rf magnetron sputtering. Interfacial and surface roughness parameters of heterostructures were extracted from the simulation of specular x-ray reflectivity data. The structure exhibited clockwise capacitance-voltage hysteresis with a maximum memory window of 2.0 V at a bias voltage of {+-}7 V. Frequency dependent (5 kHz-1 MHz) measurements at room temperature indicated that the clockwise hysteresis originates from the ferroelectric domain reversal. A minimum leakage current density of 4x10{sup -8} A/cm{sup 2} of fabricated capacitors at an applied voltage of {+-}5 V revealed that the ZrO{sub 2} buffer layer prevents the interfacial diffusion between SBT thin film and the substrate, resulting in an improvement of interface quality. The charge retention time of the ferroelectric capacitor was studied as a function of buffer layer thickness.

36 MATERIALS SCIENCE↗

Room Temperature Ferromagnetism in Cu Doped ZnO Thin Films

We report on the growth of Cu doped ZnO thin films for different Cu concentration from 0.1%, to10% by RF magnetron sputtering. The X-ray diffraction study has shown single phase wurtzite type ZnO thin films with no evidence of copper/copper oxide or any other secondary phases. Room temperature ferromagnetism was observed in RF sputtered Cu doped ZnO films with magnetic moment per Cu atom first increasing and then decreasing with an increasing Cu content. Decrease of band gap with Cu doping, indicating strong p-d mixing of O and Cu is clear by the absorption spectroscopy study. The surface morphology by AFM of pure and Cu doped ZnO thin films show average grain size of 110nm and RMS surface roughness of 2.15 nm.

36 MATERIALS SCIENCE↗

Modeling of ultrasound transmission through a solid-liquid interface comprising a network of gas pockets

Ultrasonic inspection of sodium-cooled fast reactor requires a good acoustic coupling between the transducer and the liquid sodium. Ultrasonic transmission through a solid surface in contact with liquid sodium can be complex due to the presence of microscopic gas pockets entrapped by the surface roughness. Experiments are run using substrates with controlled roughness consisting of a network of holes and a modeling approach is then developed. In this model, a gas pocket stiffness at a partially solid-liquid interface is defined. This stiffness is then used to calculate the transmission coefficient of ultrasound at the entire interface. The gas pocket stiffness has a static, as well as an inertial component, which depends on the ultrasonic frequency and the radiative mass.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Atomically smooth and homogeneously N-polar AlN film grown on silicon by alumination of Si{sub 3}N{sub 4}

By using an alumination process of Si{sub 3}N{sub 4} at high temperature with aluminum flux irradiation for sufficient time, homogeneously N-polar and atomically smooth AlN film has been realized on silicon substrate with inversion domain suppressed to less than 3.0 Multiplication-Sign 10{sup 6} cm{sup -2} and root mean square surface roughness of {approx}0.4 nm. A general interface model is proposed to explain the mechanism of polarity determination. The sharp AlN(0001)/Si(111) interface exhibits 5:4 coincidence domain matching, resulting in an almost fully relaxed AlN film.

36 MATERIALS SCIENCE↗

Impact of preparation condition of ZnO electron transport layer on performance of hybrid organic-inorganic light-emitting diodes

In this article, we have demonstrated the hybrid polymer light-emitting diodes (PLEDs) with a sol-gel derived or rf-sputtered ZnO electron transport layer (ETL). For the ZnO films prepared under different conditions, low annealing temperature (300 °C) leads to the film amorphous while the polycrystalline films is readily achieved by sputtering. Though the surface roughness can be improved by thermal annealing at 400 °C for sputtered films, the release of compressive stress after treatment has shrunk the optical band gap from 3.282 to 3.268 eV. As the ETL in PLEDs, the reduced band gap could increase potential barrier for electron injection and decrease the hole blocking capability. In our cases, luminance larger than 7000 cd/m{sup 2} can be obtained in device with pristine sputtered ZnO ETL. It is concluded that crystalline structure of ZnO films is important to facilitate the balance of carrier mobility to obtain high luminance and high efficiency devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Epitaxial GeSn film formed by solid phase epitaxy and its application to Yb{sub 2}O{sub 3}-gated GeSn metal-oxide-semiconductor capacitors with sub-nm equivalent oxide thickness

Through the technique of solid phase epitaxy (SPE), an epitaxial Ge{sub 0.955}Sn{sub 0.045} film was formed on a Ge substrate by depositing an amorphous GeSn film followed by a rapid thermal annealing at 550 °C. A process that uses a SiO{sub 2} capping layer on the amorphous GeSn film during SPE was proposed and it prevents Sn precipitation from occurring while maintaining a smooth surface due to the reduced surface mobility of Sn atoms. The high-quality epitaxial GeSn film was observed to have single crystal structure, uniform thickness and composition, and tiny surface roughness with root mean square of 0.56 nm. With a SnO{sub x}-free surface, Yb{sub 2}O{sub 3}-gated GeSn metal-oxide-semiconductor (MOS) capacitors with equivalent oxide thickness (EOT) of 0.55 nm were developed. A small amount of traps inside the Yb{sub 2}O{sub 3} was verified by negligible hysteresis in capacitance measurement. Low leakage current of 0.4 A/cm{sup 2} at gate bias of flatband voltage (V{sub FB})-1 V suggests the high quality of the gate dielectric. In addition, the feasibility of using Yb{sub 2}O{sub 3} to well passivate GeSn surface was also evidenced by the small interface trap density (D{sub it}) of 4.02 × 10{sup 11} eV{sup −1} cm{sup −2}, which can be attributed to smooth GeSn surface and Yb{sub 2}O{sub 3} valency passivation. Both leakage current and D{sub it} performance outperform other passivation techniques at sub-nm EOT regime. The proposed epitaxial GeSn film along with Yb{sub 2}O{sub 3} dielectric paves an alternative way to enable high-performance GeSn MOS devices.

36 MATERIALS SCIENCE↗

Atomic layer deposition of ultrathin Cu{sub 2}O and subsequent reduction to Cu studied by in situ x-ray photoelectron spectroscopy

The growth of ultrathin (<5 nm) Ru-doped Cu{sub 2}O films deposited on SiO{sub 2} by atomic layer deposition (ALD) and Cu films by subsequent reduction of the Cu{sub 2}O using HCO{sub 2}H or CO is reported. Ru-doped Cu{sub 2}O has been deposited by a mixture of 16: 99 mol. % of [({sup n}Bu{sub 3}P){sub 2}Cu(acac)] as Cu precursor and 17: 1 mol. % of [Ru(η{sup 5}-C{sub 7}H{sub 11})(η{sup 5}-C{sub 5}H{sub 4}SiMe{sub 3})] as Ru precursor. The catalytic amount of Ru precursor was to support low temperature reduction of Cu{sub 2}O to metallic Cu by formic acid (HCO{sub 2}H) on arbitrary substrate. In situ x-ray photoelectron spectroscopy investigations of the Cu{sub 2}O ALD film indicated nearly 1 at. % of carbon contamination and a phosphorous contamination below the detection limit after sputter cleaning. Systematic investigations of the reduction of Ru-doped Cu{sub 2}O to metallic Cu by HCO{sub 2}H or CO as reducing agents are described. Following the ALD of 3.0 nm Cu{sub 2}O, the ultrathin films are reduced between 100 and 160 °C. The use of HCO{sub 2}H at 110 °C enabled the reduction of around 90% Cu{sub 2}O. HCO{sub 2}H is found to be very effective in the removal of oxygen from Ru-doped Cu{sub 2}O films with 2.5–4.7 nm thickness. In contrast, CO was effective for the removal of oxygen from the Cu{sub 2}O films only below 3.0 nm at 145 °C. Root mean square surface roughness of 0.4 ± 0.1 nm was observed from atomic force microscopy (AFM) investigations after the ALD of Cu{sub 2}O, followed by the subsequent reduction of 3.0 nm Cu{sub 2}O using either HCO{sub 2}H at 110 °C or CO at 145 °C on SiO{sub 2}. Furthermore, ex situ low energy ion scattering and AFM investigations confirmed that the Cu{sub 2}O film after ALD and Cu films after subsequent reduction was continuous on the SiO{sub 2} substrate.

42 ENGINEERING↗

Two-dimensional Gaussian processes applied to the determination of contact between lubricated rolling surfaces

Theoretical investigation of how effectively a lubricant film prevents metallic contact between two rolling surfaces (such as in ball bearings) as a function of surface roughness parameters. The parameters considered are the spectral moments of the two-dimensional surface obtained by superposition of the two rolling surfaces. We consider the peak height distribution, estimation of one-dimensional profile spectral moments, and the estimation of two-dimensional surface moments from several profile measurements are taken into account. Also given is an asymptotic relation between the mean film thickness and contact occurrences.

Sidik, S. M.↗

Parametric analysis of synthetic aperture radar data acquired over truck garden vegetation

An airborne X-band SAR acquired multipolarization and multiflight pass SAR images over a truck garden vegetation area. Based on a variety of land cover and row crop direction variations, the vertical (VV) polarization data contain the highest contrast, while cross polarization contains the least. When the radar flight path is parallel to the row direction, both horizontal (HH) and VV polarization data contain very high return which masks out the specific land cover that forms the row structure. Cross polarization data are not that sensitive to row orientation. The inclusion of like and cross polarization data help delineate special surface features (e.g., row crop against non-row-oriented land cover, very-rough-surface against highly row-oriented surface).

Wu, S. T.↗

Development of wind tunnel techniques for the solution of problems in planetary Aeolian processes

Kutzbach reports wind profiles over a series of roughness elements on a frozen lake and how the wind profile changed as the surface roughness was varied. The approach of the current study was to duplicate Kutzbach's roughness arrays in the wind tunnel at 1/20 and 1/40 scales, and to compare the wind profiles over these scale models to those derived by Kutzbach at full scale in the field. The effects of scale differences and data reduction techniques are discussed. Although the study suggests that wind tunnel scale models can predict parameters measured in the field, the development of more definitive guidelines requires a field experiment designed specifically for comparison with wind tunnel results.

Sullivan, Robert↗

DSS 14 64-meter antenna S- and X-band efficiency and system noise temperature calibrations, September 1987

The efficiency and noise temperature characteristics of the DSN 64 m antenna network prior to its upgrading to 70 m configuration are documented. The DSS 14 (Goldstone, California) is the last of the three large antennas to be upgraded, and the test results presented document its performance just prior to its downtime during the end of 1987. Antenna area efficiency was found to be somewhat higher at DSS 14 than at DSS 43 (Australia) and DSS 63 (Spain). The peak X-band efficiency was determined to be 49.8 percent (without atmosphere), compared with 45.4 and 45.1 percent for DSS 43 and DSS 63, respectively. The X-band zenith system noise temperature was found to be 1 to 3 Kelvins higher than at the other two stations, depending on which maser was chosen for the measurements. Ascribing efficiency differences to small-scale antenna surface roughness, DSS 14 may be regarded as having a 1.5 to 1.6 mm rms surface as compared to the other two antennas with 1.7 to 1.8 mm rms surfaces.

Slobin, S. D.↗

Assessment of surface turbulent fluxes using geostationary satellite surface skin temperatures and a mixed layer planetary boundary layer scheme

A method is presented for evaluating the fluxes of sensible and latent heating at the land surface, using satellite-measured surface temperature changes in a composite surface layer-mixed layer representation of the planetary boundary layer. The basic prognostic model is tested by comparison with synoptic station information at sites where surface evaporation climatology is well known. The remote sensing version of the model, using satellite-measured surface temperature changes, is then used to quantify the sharp spatial gradient in surface heating/evaporation across the central United States. An error analysis indicates that perhaps five levels of evaporation are recognizable by these methods and that the chief cause of error is the interaction of errors in the measurement of surface temperature change with errors in the assigment of surface roughness character. Finally, two new potential methods for remote sensing of the land-surface energy balance are suggested which will relay on space-borne instrumentation planned for the 1990s.

Diak, George R.↗

Approach to derivation of SIR-C science requirements for calibration

Many of the experiments proposed for the forthcoming SIR-C mission require calibrated data, for example those which emphasize (1) deriving quantitative geophysical information (e.g., surface roughness and dielectric constant), (2) monitoring daily and seasonal changes in the Earth's surface (e.g., soil moisture), (3) extending local case studies to regional and worldwide scales, and (4) using SIR-C data with other spaceborne sensors (e.g., ERS-1, JERS-1, and Radarsat). There are three different aspects to the SIR-C calibration problem: radiometric and geometric calibration, which have been previously reported, and polarimetric calibration. The study described in this paper is an attempt at determining the science requirements for polarimetric calibration for SIR-C. A model describing the effect of miscalibration is presented first, followed by an example describing how to assess the calibration requirements specific to an experiment. The effects of miscalibration on some commonly used polarimetric parameters are also discussed. It is shown that polarimetric calibration requirements are strongly application dependent. In consequence, the SIR-C investigators are advised to assess the calibration requirements of their own experiment. A set of numbers summarizing SIR-C polarimetric calibration goals concludes this paper.

Dubois, Pascale C.↗

Guide to Magellan image interpretation

An overview of Magellan Mission requirements, radar system characteristics, and methods of data collection is followed by a description of the image data, mosaic formats, areal coverage, resolution, and pixel DN-to-dB conversion. The availability and sources of image data are outlined. Applications of the altimeter data to estimate relief, Fresnel reflectivity, and surface slope, and the radiometer data to derive microwave emissivity are summarized and illustrated in conjunction with corresponding SAR image data. Same-side and opposite-side stereo images provide examples of parallax differences from which to measure relief with a lateral resolution many times greater than that of the altimeter. Basic radar interactions with geologic surfaces are discussed with respect to radar-imaging geometry, surface roughness, backscatter modeling, and dielectric constant. Techniques are described for interpreting the geomorphology and surface properties of surficial features, impact craters, tectonically deformed terrain, and volcanic landforms. The morphologic characteristics that distinguish impact craters from volcanic craters are defined. Criteria for discriminating extensional and compressional origins of tectonic features are discussed. Volcanic edifices, constructs, and lava channels are readily identified from their radar outlines in images. Geologic map units are identified on the basis of surface texture, image brightness, pattern, and morphology. Superposition, cross-cutting relations, and areal distribution of the units serve to elucidate the geologic history.

Ford, John P.↗

Lunar Geodetic Opportunities with the Laser Altimeter on LRO

The Lunar Reconnaissance Orbiter (LRO) is to be launched at the end of 2008 and will carry 7 instruments, one of which is a laser altimeter (LOLA), and obtain observations of the Moon for a period of 1 year. The orbit will be near polar and approximately circular at 50 km altitude with monthly orbital adjustments to maintain the mean altitude. The LOLA instrument has a -10 cm single-shot accuracy, with 5 beams, and operates at 28 Hz. It provides 5 adjacent profiles, each approximately 12 to 15 meters apart with a swath of approximately 65 meters. The 5 beams are arranged in a cross-shaped pattern that provides simultaneous along and cross track altimetry and providing slopes in 2 orthogonal directions every 50 meters along track. In combination with the LRO tracking data LOLA will be used to improve the model of the lunar gravity by using the altimeter on both the lunar near-side and far-side as an additional tracking system to enable precise positioning of the LRO spacecraft at about the 50 meter level rms. The instrument is expected to provide full polar coverage at very high northern and southern latitudes with spatial resolutions of 25 meters or better. In addition to the range to the surface LOLA measures the surface roughness from the spreading of the laser pulse and also the reflectance of the surface at 1064 nm. These measurements in conjunction with the altimetry will assist in the selection of future landing sites for future robotic and human missions to the Moon.

Zuber, Maria T.↗

The Salinity Retrieval Algorithms for the NASA Aquarius Version 5 and SMAP Version 3 Releases

The Aquarius end-of-mission (Version 5) salinity data set was released in December 2017. This article gives a comprehensive overview of the main steps of the Level 2 salinity retrieval algorithm. In particular, we will discuss the corrections for wind induced surface roughness, atmospheric oxygen absorption, reflected galactic radiation and side-lobe intrusion from land surfaces. Most of these corrections have undergone major updates from previous versions, which has helped mitigating temporal and zonal biases. Our article also discusses the ocean target calibration for Aquarius Version 5. We show how formal error estimates for the Aquarius retrievals can be obtained by perturbing the input to the algorithm. The performance of the Aquarius Version 5 salinity retrievals is evaluated against salinity measurements from the ARGO network and the HYCOM model. When stratified as function of sea surface temperature or sea surface wind speed, the difference between Aquarius Version 5 and ARGO is within +/-0.1 psu. The estimated global RMS uncertainty for monthly 100 km averages is 0.128 psu for the Aquarius Version 5 retrievals. Finally, we show how the Aquarius Version 5 salinity retrieval algorithm is adapted to retrieve salinity from the Soil-Moisture Active Passion (SMAP) mission.

retrieval algorithm↗

The Salinity Retrieval Algorithms for the NASA Aquarius Version 5 and SMAP Version 3 Releases

The Aquarius end-of-mission (Version 5) salinity data set was released in December 2017. This article gives a comprehensive overview of the main steps of the Level 2 salinity retrieval algorithm. In particular, we will discuss the corrections for wind induced surface roughness, atmospheric oxygen absorption, reflected galactic radiation and side-lobe intrusion from land surfaces. Most of these corrections have undergone major updates from previous versions, which has helped mitigating temporal and zonal biases. Our article also discusses the ocean target calibration for Aquarius Version 5. We show how formal error estimates for the Aquarius retrievals can be obtained by perturbing the input to the algorithm. The performance of the Aquarius Version 5 salinity retrievals is evaluated against salinity measurements from the ARGO network and the HYCOM model. When stratified as function of sea surface temperature or sea surface wind speed, the difference between Aquarius Version 5 and ARGO is within +-0.1 psu. The estimated global RMS uncertainty for monthly 100 km averages is 0.128 psu for the Aquarius Version 5 retrievals. Finally, we show how the Aquarius Version 5 salinity retrieval algorithm is adapted to retrieve salinity from the Soil-Moisture Active Passion (SMAP) mission.

calibration↗