Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface termination”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,639 records · Page 91

LaCrO3 heteroepitaxy on SrTiO3(001) by molecular beam epitaxy

Stoichiometric, epitaxial LaCrO3 films have been grown on TiO2-terminated SrTiO3(001) substrates by molecular beam epitaxy using O2 as the oxidant. Film growth occurred in a layer-by-layer fashion, giving rise to structurally excellent films and surfaces which preserve the step-terrace structure of the substrate. The critical thickness is in excess of 500 Å. Near-surface Cr(III) is highly susceptible to further oxidation to Cr(V), leading to the formation of a disordered phase upon exposure to atomic oxygen. Recovery of the original epitaxial LaCrO3 phase is readily achieved by vacuum annealing.

36 MATERIALS SCIENCE↗

Formation of two-dimensional electron and hole gases at the interface of half-Heusler semiconductors

Heuslers are a prominent family of multifunctional materials that includes semiconductors, half metals, topological semimetals, and magnetic superconductors. Owing to their same crystalline structure, yet quite different electronic properties and flexibility in chemical composition, Heusler-based heterostructures can be designed to show intriguing properties at the interface. Using electronic structure calculations, we show that two-dimensional electron or hole gases (2DEG or 2DHG) form at the interface of half-Heusler (HH) semiconductors without any chemical doping. We use CoTiSb/NiTiSn as an example, and show that the 2DEG at the TiSb/Ni(001) termination and the 2DHG at the Co/TiSn(001) termination are intrinsic to the interface, and hold rather high charge densities of 3 × 10 14 carriers/cm 2 . These excess charge carriers are tightly bound to the interface plane and are fully accommodated in transition-metal d subbands. Furthermore, the formation of 2DEG and 2DHG are not specific to the CoTiSb/NiTiSn system; a list of combinations of HH semiconductors that are predicted to form 2DEG or 2DHG is provided based on band alignment, interface termination, and lattice mismatch.

36 MATERIALS SCIENCE↗

AFIP-6 Breach Assessment Report

Analysis of the AFIP-6 experiment is summarized in this report in order to determine the cause of gaseous fission product release observed during irradiation. During the irradiation, a series of small fission product releases were observed. In order to limit the potential for primary coolant contamination, the operating cycle was terminated and the AFIP-6 experiment was removed for examination. Both in-canal and post-irradiation examination revealed the presence of an unusually thick oxide layer and discrete surface blisters on the fuel plates. These blisters were the likely cause of fission product release. Subsequent detailed thermal hydraulic analysis of the experiment indicated that the combination of the high operating power and test vehicle configuration led to high nominal operating temperatures for the fuel plates. This elevated temperature led to accelerated surface corrosion and eventually spallation of the fuel plate cladding. The thermal insulating nature of this corrosion layer led to significantly elevated fuel meat temperatures that induced blistering. Analysis was performed to validate a corrosion rate model and criteria for onset of spallation type surface corrosion were determined. The corrosion rate model will be used to estimate the oxide thickness anticipated for experiments in the future. The margin to the spallation threshold will then be used to project the experiment performance.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Earth Albedo and the orbit of LAGEOS

The long-period perturbations in the orbit of the Lageos satellite due to the Earth's albedo have been found using a new analytical formalism. The Earth is assumed to be a sphere whose surface diffusely reflects sunlight according to Lambert's law. Specular reflection is not considered. The formalism is based on spherical harmonics; it produces equations which hold regardless of whether the terminator is seen by the satellite or not. Specializing to the case of a realistic zonal albedo shows that Lageos' orbital semimajor axis changes periodically by only the a few millimeters and the eccentricity by one part in 100,000. The longitude of the node increases secularly. The effect considered here can explain neither the secular decay of 1.1 mm/day in the semimajor axis nor the observed along-track variations in acceleration of order 2 x 10 to the minus 12 power/sq ms.

Rubincam, D. P.↗

Earth albedo and the orbit of Lageos

The long-period perturbations in the orbit of the Lageos satellite due to the Earth's albedo have been found using a new analytical formalism. The Earth is assumed to be a sphere whose surface diffusely reflects sunlight according to Lambert's law. Specular reflection is not considered. The formalism is based on spherical harmonics; it produces equations which hold regardless of whether the terminator is seen by the satellite or not. Specializing to the case of a realistic zonal albedo shows that Lageos' orbital semimajor axis changes periodically by only a few millimeters and the eccentricity by one part in 100,000. The longitude of the node increases secularly. The effect considered here can explain neither the secular decay of 1.1 mm/day in the semimajor axis nor the observed along-track variations in acceleration of order 2 x 10 to the minus 12 power/sq ms.

Rubincam, D. P.↗

Electrically resistive coating for remediation (regeneration) of a diesel particulate filter and method

A resistively heated diesel particulate filter (DPF). The resistively heated DPF includes a DPF having an inlet surface and at least one resistive coating on the inlet surface. The at least one resistive coating is configured to substantially maintain its resistance in an operating range of the DPF. The at least one resistive coating has a first terminal and a second terminal for applying electrical power to resistively heat up the at least one resistive coating in order to increase the temperature of the DPF to a regeneration temperature. The at least one resistive coating includes metal and semiconductor constituents.

36 MATERIALS SCIENCE↗

Electrochemically Mediated Au–C(sp 2 ) Anchors for Molecular Electronics

Terminal anchor groups play a key role in the stability and electronic properties of molecular junctions. Single molecule junctions typically consist of two preinstalled terminal anchors linking organic molecules to metal electrodes. Here, in this work, we show that p -terphenyl derivatives containing only a single terminal anchor show conductance features similar to junctions with two preinstalled terminal anchors. A set of p -terphenyl derivatives with one terminal anchor was prepared using automated chemical synthesis and characterized using single molecule electronics experiments, molecular dynamics (MD) simulations, bulk electrochemistry and spectroscopy, and nonequilibrium Green’s function-density functional theory (NEGF-DFT) calculations. Our results show that 4-amino- p -terphenyl (PPP) and related analogs exhibit a well-defined high conductance state that is diminished or absent in other p-terphenyl derivatives lacking a preinstalled amine terminal anchor or fluorine or methyl substitutions at the terminal para position. However, a low conductance state is observed in all amino- p -terphenyl derivatives with one preinstalled anchor due to molecular junctions formed by noncovalent dimeric π–π stacking interactions. The observed high conductance state diminishes upon the addition of reducing agents and is restored upon the addition of an oxidizing agent. Our results suggest that the high conductance state arises due to Au–C(sp 2 ) bond formation facilitated by a single electron oxidation event at the electrode surface. A series of control experiments with different anchor groups shows that primary amines play a key role in forming Au–C bonds for molecular junctions. Overall, these results suggest that Au–C bond formation gives rise to high conductance pathways in organic molecules containing only one preinstalled terminal anchor. Insights from this work can be leveraged in the design of molecular electronic devices, particularly in understanding the mechanisms of molecular binding and junction formation.

charge transport↗

Use of a neutralizing antibody helps identify structural features critical for binding of Clostridium difficile toxin TcdA to the host cell surface

Clostridium difficile is a clinically significant pathogen that causes mild-to-severe (and often recurrent) colon infections. Disease symptoms stem from the activities of two large, multidomain toxins known as TcdA and TcdB. The toxins can bind, enter, and perturb host cell function through a multistep mechanism of receptor binding, endocytosis, pore formation, autoproteolysis, and glucosyltransferase-mediated modification of host substrates. Monoclonal antibodies that neutralize toxin activity provide a survival benefit in preclinical animal models and prevent recurrent infections in human clinical trials. However, the molecular mechanisms involved in these neutralizing activities are unclear. To this end, we performed structural studies on a neutralizing monoclonal antibody, PA50, a humanized mAb with both potent and broad-spectrum neutralizing activity, in complex with TcdA. Electron microscopy imaging and multiangle light-scattering analysis revealed that PA50 binds multiple sites on the TcdA C-terminal combined repetitive oligopeptides (CROPs) domain. A crystal structure of two PA50 Fabs bound to a segment of the TcdA CROPs helped define a conserved epitope that is distinct from previously identified carbohydrate-binding sites. Binding of TcdA to the host cell surface was directly blocked by either PA50 mAb or Fab and suggested that receptor blockade is the mechanism by which PA50 neutralizes TcdA. These findings highlight the importance of the CROPs C terminus in cell-surface binding and a role for neutralizing antibodies in defining structural features critical to a pathogen's mechanism of action. We conclude that PA50 protects host cells by blocking the binding of TcdA to cell surfaces.

59 BASIC BIOLOGICAL SCIENCES↗

Continuous Counter‐Current Microfluidic Liquid–Liquid Extraction Achieved Using a Pair of Wettable Screen Meshes

Continuous counter‐current microfluidic liquid–liquid extraction performs separations by flowing immiscible liquids in opposing directions within a single flow channel. In principle, this flow arrangement enables a large number of theoretical separation units in a small footprint, without using interstage valving, pumping, and phase separation. Despite its potential for excellent separation performance, this microfluidic scheme rarely appears in literature due to the requirement for capillary forces to be greater than hydrodynamic forces for stable flow. We present a novel microfluidic device and flow approaches that overcome this force‐balance challenge, enabling stable, long‐duration continuous counter‐current flow. Additionally, we cover a suite of methodologies for quantifying the performance of the microfluidic device, revealing the number of theoretical equilibrium stages achieved. The enabling technologies include a woven mesh screen‐based microfluidic device architecture that is easily fabricated outside of a clean room, surface functionalization strategies to promote conjugate (organic/aqueous) wettability, flow approaches to eliminate bubbles and carryover, and computer‐aided flow automation with optical measurement of extraction performance. The reported experiments lasted for over 36 h, terminated only at experiment conclusion, where the device still exhibited good performance. Automated Raman spectroscopy was used for solute quantitation of the ternary system tert‐butanol in a toluene/water matrix, a ternary system that was specifically chosen to analyze the device's performance with a small solute partition ratio and to enable in‐line Raman measurements of solute concentrations in both phases. The microfluidic device possessed a 55 mm contact length and a 38.5 µL internal volume. During counter‐current flow, we observed approximately 37 equilibrium stages (37 ± 13) based on a best‐fit of the solute fraction remaining in the aqueous phase using a Kremser Group Method analysis.

36 MATERIALS SCIENCE↗

Mars Molniya Orbit Atmospheric Resource Mining

This NASA Innovative Advanced Concepts (NIAC) Phase I study examined the revolutionary concept of performing resource collection and utilization during Mars orbital operations in order to enable the landing of large payloads. An exploration architecture was developed, out of which several mission alternatives were developed. Concepts of operations were then developed for each mission alternative, followed by concepts for spacecraft systems, which were traded to assess their feasibility. A novel architecture using Mars Molniya Orbit Atmospheric Resource Mining is feasible to enable an Earth-independent and pioneering, permanent human presence on Mars by providing a reusable, single-stage-to-orbit transportation system. This will allow cargo and crew to be routinely delivered to and from Mars without transporting propellants from Earth.In Phase I, our study explored how electrical energy could be harnessed from the kinetic energy of the incoming spacecraft and then be used to produce the oxygen necessary for landing. This concept of operations is revolutionary in that its focus is on using in situ resources in complementary and varied forms: the upper atmosphere of Mars is used for aerocapture, which is followed by aerobraking, the kinetic energy of the spacecraft is transformed into usable electrical energy during aerobraking, and the atmospheric composition is the source of oxidizer for a landing under supersonic retropropulsion. This NASA Innovative Advanced Concepts (NIAC) Phase I study explores a novel mission architecture to establish routine, Earth-independent transfer of large mass payloads between Earth and the Mars surface and back to Mars orbit. The first stage of routine mission operations involves an atmospheric resource mining aerobraking campaign following aerocapture into a highly elliptical Mars orbit. During each pass through the atmosphere, the vehicle ingests the atmospheric oxidizer and stores it onboard, using solid oxide electrolysis to convert the primarily CO2 atmosphere into usable O2 for propellant. Power is made available through the use of magnetohydrodynamic energy generation, which converts the motion of the plasma in the shock later into usable electrical energy. Upon termination of the aerobraking sequence, the descent vehicle detaches from the orbit stack, deorbits, and executes the entry, descent, and landing sequence. Hypersonic deceleration is achieved via a deployable heat shield to lower the vehicle ballistic coefficient, and supersonic and subsonic deceleration are achieved via retropropulsion. Mars surface operations involve resource mining of the Martian regolith to produce CH4 and O2 propellant to be used for the subsequent MDAV ascent back to high Mars orbit (HMO) providing an apoapsis raise maneuver to initialize the aerobraking sequence, in addition to providing fuel from the Mars surface for EDL propulsive descent. The Resource Collector Vehicle (RCV), which is used for the orbital mining operations, is raised back to HMO via onboard deployable augmented solar electric propulsion. Concepts of operations were developed for each mission alternative, to evaluate between them and assess feasibility.

Mining↗

Surface structure of α-Cr2O3(0001) after activated oxygen exposure

The surface structure of a-Cr2O3(0001) before and after exposure to activated oxygen from an ECR plasma source was investigated by x-ray photoelectron spectroscopy (XPS) and x-ray photoelectron diffraction (XPD). Epitaxial Cr2O3(0001) thin films were deposited on Al2O3(0001) substrates by oxygen-plasma-assisted molecular beam epitaxy (OPA-MBE). When cooled or annealed in vacuum, strong evidence for a Cr-Cr-O3- termination was obtained by comparing the Cr3+ XPD azimuthal scan to single scattering simulations. However, after plasma exposure, a high binding energy feature was observed in the Cr 2p XPS spectrum that possesses an ordered structure distinct from the underlying Cr3+ of Cr2O3, which remains Cr-Cr-O3-like. Investigation of this new surface structure with simulations of various candidate structures tentatively rules out CrO2-like configurations. The high binding energy feature likely arises from a higher oxidation state of Cr. One possibility is the oxidation of the surface layer of Cr to Cr6- with a double chromyl structure (O=Cr=O).

Environmental Molecular Sciences Laboratory↗

Excited-State Dynamics of a CsPbBr 3 Nanocrystal Terminated with Binary Ligands: Sparse Density of States with Giant Spin–Orbit Coupling Suppresses Carrier Cooling

Fully inorganic lead halide perovskite nanocrystals (NCs) are of interest for photovoltaic and light-emitting devices due to optoelectronic properties that can be tuned/optimized via halide composition, surface passivation, doping, and confinement. Compared to bulk materials, certain excited-state properties in NCs can be adjusted by electronic confinement effects such as suppressed hot carrier cooling and enhanced radiative recombination. In this paper, we use spinor Kohn–Sham orbitals (SKSOs) with spin–orbit coupling (SOC) interaction as a basis to compute excited-state dissipative dynamics simulations on a fully passivated CsPbBr 3 NC atomistic model. Redfield theory in the density matrix formalism is used to describe electron–phonon interactions which drive hot carrier cooling and nonradiative recombination ( k nonrad ). Radiative recombination ( k rad ) is calculated through oscillator strengths using SKSO basis. From k rad and k rad + k nonrad , we compute a theoretical photoluminescence quantum yield (PLQY) of 53%. Computed rates of hot carrier cooling ( k cooling ≈ 10 –1 1/ps) compare favorably with what has been reported in the literature. Interestingly, we observe that hot electron cooling slows down near the band edge, which we attribute to large SOC in the conduction band combined with strong confinement, which creates subgaps above the band edge. This slow carrier cooling could potentially impact hot carrier extraction before complete thermalization in photovoltaics (PVs). Implications of this work suggest that strong/intermediate confined APbX 3 NCs are better suited to applications in PVs due to slower carrier cooling near the conduction band edge, while intermediate/weak confined NCs are more appropriate for light-emitting applications, such as LEDs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structure of ultrathin heteroepitaxial superconducting YBa{sub 2}Cu{sub 3}O{sub 7-x} films

The atomic structures of ultrathin YBa{sub 2}Cu{sub 3}O{sub 7-x} (YBCO) films on SrTiO{sub 3}(001) (STO) and (La{sub x}Sr{sub 1-x})(Al{sub y}Ta{sub 1-y})O{sub 3}(001) (LSAT) were investigated with sub-Angstrom resolution using surface x-ray diffraction and the phase-retrieval direct-method difference map using the constraints of atomicity and film shift (DCAF). The model-independent electron densities which emerge from random initializations in DCAF are exceedingly stable. The films grow with a well-defined stacking sequence even when grown on substrates with mixed terrace termination. Only very minor out-of-plane deviations from bulk YBCO are observed in the film structures, although they are perfectly strained to the substrate and are therefore tetragonal. The films are superconducting, with critical temperatures for growth on STO and LSAT of 43 K and 70 K, respectively. These results have important implications for reliable structure determination of technologically relevant complex-metal oxide surfaces and interfaces.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ferrocene Containing Copolymers with Improved Electrostatic Dissipation Properties for Advanced Applications

Electrostatic dissipative polymers are used for a variety of functions. Typical methods utilized to transform electrically insulating polymers into either charge dissipative or conductive materials involve incorporating a conductive filler, conductive polymer, oxidizing the surface using plasma, or incorporating surfactants that act as surface wetting agents. Another approach is to synthesize a block copolymer that is expected to result in better electrical properties with minimal impacts to physical, fire, and thermal properties. One such block that can be added into the main chain of polymers is a diol terminated ferrocene oligomer, which is expected to impart electrostatic dissipative properties into the host polymer while concurrently improving the overall fire properties. Previous work with polyurethanes incorporating a ferrocene oligomer into the main chain resulted in much improved fire retardancy. In dealing with electrostatic dissipative materials the important questions are: how easily does the material charge and how quickly can the charge move to ground. One normally describes the materials conductivity, but conductivity only measures the fastest path for an electron not the slowest path. The slowest path is the one of interest, since it is left on the surface and thus can cause discharges. In order to assess ease of charging and decay times corona charge dissipation measurements can accurately assess these properties by introducing a charge on the surface of the material then measuring the surface voltage and the amount of charge deposited. The charge decay curve then will give an indication of a materials electrostatic dissipation properties. Normally, triboelectric testing can be performed, but results vary. Corona charge dissipation results are more repeatable.

Smith, T. M.↗

Imaginary admittance and charge transfer resistance correlate to the physiological status of Shewanella oneidensis cultures in real time

Monitoring microbial activity is essential for industrial and environmental applications to proceed efficiently. To minimize time and labor-intensive monitoring, a new paradigm is required for in-situ, real time analysis. Since bioconversion of organics is accomplished by microorganisms through the oxidation of feedstocks linked to the reduction of electron acceptors, microorganisms can be viewed as electrochemical catalysts. In this respect, cell membranes have an electrical potential, which is analogous to a conventional capacitor and linked dynamically to cellular activity. Here, in this study, we demonstrate the use of electrochemical impedance spectrometry (EIS) and cyclic voltammetry (CV) for monitoring microbial metabolic activity in real time, in-situ. The effect of organic electron donors as a function of concentration to the physiological status of strains of Shewanella oneidensis was determined. In this study, the pyomelanin overproducer (S. oneidensis ΔhmgA) and the pyomelanin deficient mutant (S. oneidensis ΔmelA) were chosen due to different surface electrochemical characteristics along with differences in oxygen utilization efficiency. CV, relative admittance, phase shift and permittivity changed with growth status and correlated with electron flow from organic carbon sources and terminal electron acceptor availability. This work offers a novel and inexpensive approach to real time monitoring with the advantage of abundant data.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Crystal Structure of an Activated Variant of Small Heat Shock Protein Hsp16.5

How does the sequence of a single small heat shock protein (sHSP) assemble into oligomers of different sizes? To gain insight into the underlying structural mechanism, we determined the crystal structure of an engineered variant of Methanocaldococcus jannaschii Hsp16.5 wherein a 14 amino acid peptide from human heat shock protein 27 (Hsp27) was inserted at the junction of the N-terminal region and the {alpha}-crystallin domain. In response to this insertion, the oligomer shell expands from 24 to 48 subunits while maintaining octahedral symmetry. Oligomer rearrangement does not alter the fold of the conserved {alpha}-crystallin domain nor does it disturb the interface holding the dimeric building block together. Rather, the flexible C-terminal tail of Hsp16.5 changes its orientation relative to the {alpha}-crystallin domain which enables alternative packing of dimers. This change in orientation preserves a peptide-in-groove interaction of the C-terminal tail with an adjacent {beta}-sandwich, thereby holding the assembly together. The interior of the expanded oligomer, where substrates presumably bind, retains its predominantly nonpolar character relative to the outside surface. New large windows in the outer shell provide increased access to these substrate-binding regions, thus accounting for the higher affinity of this variant to substrates. Oligomer polydispersity regulates sHSPs chaperone activity in vitro and has been implicated in their physiological roles. The structural mechanism of Hsp16.5 oligomer flexibility revealed here, which is likely to be highly conserved across the sHSP superfamily, explains the relationship between oligomer expansion observed in disease-linked mutants and changes in chaperone activity.

59 BASIC BIOLOGICAL SCIENCES↗

Characterizing Surface Acidic Sites in Mesoporous-Silica-Supported Tungsten Oxide Catalysts Using Solid State NMR and Quantum Chemistry Calculations

The acidic sites in dispersed tungsten oxide supported on SBA-15 mesoporous silica were investigated using a combination of pyridine titration, both fast-, and slow-MAS {sup 15}N NMR, static {sup 2}H NMR, and quantum chemistry calculations. It is found that the bridged acidic -OH groups in surface adsorbed tungsten dimers (i.e., W-OH-W) are the Broensted acid sites. The unusually strong acidity of these Broensted acid sites is confirmed by quantum chemistry calculations. In contrast, terminal W-OH sites are very stable and only weakly acidic as are terminal Si-OH sites. Furthermore, molecular interactions between pyridine molecules and the dimer Broensted and terminal W-OH sites for dispersed tungsten oxide species is strong. This results in restricted molecular motion for the interacting pyridine molecules even at room temperature, i.e., a reorientation mainly about the molecular 2-fold axis. This restricted reorientation makes it possible to estimate the relative ratio of the Broensted (tungsten dimer) to the weakly acidic terminal W-OH sites in the catalyst using the slow-MAS {sup 1}H-{sup 15}N CP PASS method.

15N NMR↗

Non-equilibrium anisotropic colloidal single crystal growth with DNA

Abstract Anisotropic colloidal crystals are materials with novel optical and electronic properties. However, experimental observations of colloidal single crystals have been limited to relatively isotropic habits. Here, we show DNA-mediated crystallization of two types of nanoparticles with different hydrodynamic radii that form highly anisotropic, hexagonal prism microcrystals with AB 2 crystallographic symmetry. The DNA directs the nanoparticles to assemble into a non-equilibrium crystal shape that is enclosed by the highest surface energy facets (AB 2 (10 $$\overline 1$$ 1 ¯ 0) and AB 2 (0001)). Simulations and theoretical arguments show that this observation is a consequence of large energy barriers between different terminations of the AB 2 (10 $$\overline 1$$ 1 ¯ 0) facet, which results in a significant deceleration of the (10 $$\overline 1$$ 1 ¯ 0) facet growth rate. In addition to reporting a hexagonal colloidal crystal habit, this work introduces a potentially general plane multiplicity mechanism for growing non-equilibrium crystal shapes, an advance that will be useful for designing colloidal crystal habits with important applications in both optics and photocatalysis.

59 BASIC BIOLOGICAL SCIENCES↗