Search NASA⌕ Search

SEARCH · Search NASA

Results for “uniform method”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,639 records · Page 91

A multiscale control volume finite element method for advection–diffusion equations

Summary We present a new stabilized method for advection–diffusion equations, which combines a control volume FEM formulation of the governing equations with a novel multiscale approximation of the total flux. The latter incorporates information about the exact solution that cannot be represented on the mesh. To define this flux, we solve the governing equations along suitable mesh segments under the assumption that the flux varies linearly along these segments. This procedure yields second‐order accurate fluxes on the edges of the mesh. Then, we use curl‐conforming elements of the same order to lift these edge fluxes into the mesh elements. In so doing, we obtain a stabilized control volume FEM formulation that is second‐order accurate and does not require mesh‐dependent stabilization parameters. Numerical convergence studies on uniform and nonuniform grids along with several standard advection tests illustrate the computational properties of the new method. Published 2015. This article is a U.S. Government work and is in the public domain in the USA.

Bochev, Pavel↗

Development and comparison of advanced reduced-basis methods for the transient structural analysis of unconstrained structures

The development of two advanced reduced-basis methods, the force derivative method and the Lanczos method, and two widely used modal methods, the mode displacement method and the mode acceleration method, for transient structural analysis of unconstrained structures is presented. Two example structural problems are studied: an undamped, unconstrained beam subject to a uniformly distributed load which varies as a sinusoidal function of time and an undamped high-speed civil transport aircraft subject to a normal wing tip load which varies as a sinusoidal function of time. These example problems are used to verify the methods and to compare the relative effectiveness of each of the four reduced-basis methods for performing transient structural analyses on unconstrained structures. The methods are verified with a solution obtained by integrating directly the full system of equations of motion, and they are compared using the number of basis vectors required to obtain a desired level of accuracy and the associated computational times as comparison criteria.

Mcgowan, David M.↗

Calculation of potential flow past non-lifting bodies at angle of attack using axial and surface singularity methods

Two different singularity methods have been utilized to calculate the potential flow past a three dimensional non-lifting body. Two separate FORTRAN computer programs have been developed to implement these theoretical models, which will in the future allow inclusion of the fuselage effect in a pair of existing subcritical wing design computer programs. The first method uses higher order axial singularity distributions to model axisymmetric bodies of revolution in an either axial or inclined uniform potential flow. Use of inset of the singularity line away from the body for blunt noses, and cosine-type element distributions have been applied to obtain the optimal results. Excellent agreement to five significant figures with the exact solution pressure coefficient value has been found for a series of ellipsoids at different angles of attack. Solutions obtained for other axisymmetric bodies compare well with available experimental data. The second method utilizes distributions of singularities on the body surface, in the form of a discrete vortex lattice. This program is capable of modeling arbitrary three dimensional non-lifting bodies. Much effort has been devoted to finding the optimal method of calculating the tangential velocity on the body surface, extending techniques previously developed by other workers.

Shu, J. Y.↗

Measured acoustic properties of variable and low density bulk absorbers

Experimental data were taken to determine the acoustic absorbing properties of uniform low density and layered variable density samples using a bulk absober with a perforated plate facing to hold the material in place. In the layered variable density case, the bulk absorber was packed such that the lowest density layer began at the surface of the sample and progressed to higher density layers deeper inside. The samples were placed in a rectangular duct and measurements were taken using the two microphone method. The data were used to calculate specific acoustic impedances and normal incidence absorption coefficients. Results showed that for uniform density samples the absorption coefficient at low frequencies decreased with increasing density and resonances occurred in the absorption coefficient curve at lower densities. These results were confirmed by a model for uniform density bulk absorbers. Results from layered variable density samples showed that low frequency absorption was the highest when the lowest density possible was packed in the first layer near the exposed surface. The layers of increasing density within the sample had the effect of damping the resonances.

Dahl, M. D.↗

Synergetic Effect of Ultrasmall Metal Clusters and Zeolites Promoting Hydrogen Generation

Abstract Taking advantage of the synergetic effect of confined ultrasmall metal clusters and zeolite frameworks is an efficient strategy for improving the catalytic performance of metal nanocatalysts. Herein, it is demonstrated that the synergetic effect of ultrasmall ruthenium (Ru) clusters and intrinsic Brønsted acidity of zeolite frameworks can significantly promote the hydrogen generation of ammonia borane (AB) hydrolysis. Ultrasmall Ru clusters are embedded onto the silicoaluminophosphate SAPO‐34 ( CHA ) and various aluminosilicate zeolites ( MFI, * BEA , and FAU ) with tunable acidities by a facile incipient wetness impregnation method. Evidenced by high‐resolution scanning transmission electron microscopy, the sub‐nanometric Ru clusters are uniformly distributed throughout the zeolite crystals. The X‐ray absorption spectroscopy measurements reveal the existence of Ru‐H species between Ru clusters and adjacent Brønsted acid sites of zeolites, which could synergistically activate AB and water molecules, significantly enhancing the hydrogen evolution rate of AB hydrolysis. Notably, the Ru/SAPO‐34‐0.8Si (Si/Al = 0.8) and Ru/FAU (Si/Al = 30) catalysts with strong acidities afford high turnover frequency values up to 490 and 627 min −1 , respectively. These values are more than a 13‐fold enhancement than that of the commercial Ru/C catalyst, and among the top level over other heterogeneous catalysts tested under similar conditions.

08 HYDROGEN↗

Blade Coating Inverted Perovskite Solar Cells with Vacuum-Assisted Nucleation Based on Bottom Quasi-2D Passivation

Metal halide perovskite solar cells (PSCs) attract an enormous attention because of their high power conversion efficiency (PCE) and low fabrication cost. However, their commercialization is limited by fabricating highly efficient large-area solar cells. Controlling the morphology and crystallization of perovskite for large-area fabrication is difficult but important. Here, in this work, a vacuum-assisted approach is developed to obtain mirror-like, pinhole-free, highly crystalline, and uniform blade-coated perovskite films, without the use of antisolvent and air knife. This method can be a universal approach for various perovskite compositions. Meanwhile, the phenethylammonium iodide passivation effect at the top and bottom interfaces of perovskite layer based on FTO/NiO x /perovskite/C 60 /BCP/Cu inverted p-i-n structure is systematically investigated. The optimized device fabricated by blade coating under an ambient environment exhibits the champion PCE of 20.7% and is among the top few records of blade coating inverted structure based on NiOx hole transport layer. The encapsulated device retains 97% of its maximum efficiency under open-circuit condition after 1000 h of photostability test in an ambient environment at room temperature with a relative humidity of 40–60%. Herein, low-cost, easy, and reproducible strategies to fabricate efficient and stable blade-coated PSCs are demonstrated.

14 SOLAR ENERGY↗

Series Solution for Magnetic Flux Density of Circular Current Loop and a Relevant Application

The series solution to the magnetic flux density of a circular current loop is presented in the paper. The convergences of these series are assessed. Comparing the result with elliptic integral method, the validity and feasibility of series solution were verified. A computer program has been developed by the method to calculate the magnetic flux density of a multi-coil magnet and its uniformity successfully.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Bicubic partially blended rational fractal surface for a constrained interpolation problem

This paper investigates some univariate and bivariate constrained interpolation problems using fractal interpolation functions. First, we obtain rational cubic fractal interpolation functions lying above a prescribed straight line. Using a transfinite interpolation via blending functions, we extend the properties of the univariate rational cubic fractal interpolation function to generate surfaces that lie above a plane. In particular, the constrained bivariate interpolation discussed herein includes a method to construct fractal interpolation surfaces that preserve positivity inherent in a prescribed data set. Uniform convergence of the bivariate fractal interpolant to the original function which generates the data is proven.

97 MATHEMATICS AND COMPUTING↗

Template synthesis and photoelectrochemical properties of Bi{sub 2}S{sub 3} microflowers

Highlights: • Bi{sub 2}S{sub 3} microflowers were fabricated by using a sacrificial-template method. • The effect of the specific experimental parameters was examined. • Photoelectrochemical measurements were characterized. - Abstract: Uniform hierarchical Bi{sub 2}S{sub 3} nanostructures were fabricated by using Bi{sub 2}O{sub 2}CO{sub 3} nanoflowers as a sacrificial template through a hydrothermal reaction with an aqueous L-cysteine solution. Multiple techniques, such as X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Mott–Schottky (M–S) plot and electrochemical impedance spectroscopy (EIS) were applied to investigate the structure, morphology and photoelectrochemical properties of the as-prepared samples. This work demonstrated a simple and cost-effective strategy for the design and fabrication of well-defined complex hierarchical nanomaterials, which can be potentially used in energy storage and conversion devices.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Electrospraying deposition and characterization of potassium chloride targets for nuclear science measurements

Natural and isotopically enriched KCl targets were prepared using specially formulated KCl solutions, deposited by electrospraying on thin (1.5 μm) gold backings, followed by a short annealing in a preheated (350-450 °C) furnace. Various techniques, such as X-ray fluorescence (XRF), scanning electron microscopy (SEM) imaging, and energy-dispersive X-ray spectroscopy (EDS), were used to characterize the produced targets. A white neutron beam at the Los Alamos Neutron Science Center (LANSCE) facility was also used to verify the estimated atomic percentages of the enriched 40 KCl targets. KCl was deposited relatively uniformly as large particles rather than films on the gold surface. As a result, this method can be broadly extended to make stable targets that are difficult to produce with other methods and more exotic radioactive targets required for research in fundamental sciences and applications.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Fabrication of Large-Area Arrays of Vertically Aligned Gold Nanorods

Anisotropic nanoparticles, such as nanorods and nanoprisms, enable packing of complex nanoparticle structures with different symmetry and assembly orientation, which result in unique functions. Despite previous extensive efforts, formation of large areas of oriented or aligned nanoparticle structures still remains a great challenge. In this paper, we report fabrication of large-area arrays of vertically aligned gold nanorods (GNR) through a controlled evaporation deposition process. We began with a homogeneous suspension of GNR and surfactants prepared in water. During drop casting on silicon substrates, evaporation of water progressively enriched the concentrations of the GNR suspension, which induces the balance between electrostatic interactions and entropically driven depletion attraction in the evaporating solution to produce large-area arrays of self-assembled GNR on the substrates. Electron microscopy characterizations revealed the formation of layers of vertically aligned GNR arrays that consisted of hexagonally close-packed GNR in each layer. Benefiting from the close-packed GNR arrays and their smooth topography, the GNR arrays exhibited a surface-enhanced Raman scattering (SERS) signal for molecular detection at a concentration as low as 10 –15 M. Because of the uniformity in large area, the GNR arrays exhibited exceptional detecting reproducibility and operability. Finally, this method is scalable and cost-effective and could lead to diverse packing structures and functions by variation of guest nanoparticles in the suspensions.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Advancing the Performance of Anion Exchange Membrane Electrolysis by Employing a Powder-Based Ionomer during Anode Catalyst Layer Fabrication

The performance of anion exchange membrane water electrolysis (AEMWE) can be significantly improved by utilizing powdered ionomers during the fabrication of the anode catalyst layer (CL) to modify the CL properties. When comparing powdered ionomers to dispersed ionomers across various catalysts including cobalt oxide (Co 3 O 4 ), nickel−iron oxide (NiFe 2 O 4 ), and iridium oxide (IrO 2 ) the anode fabricated with powdered ionomers demonstrates improved performance in polarization curves, enhanced charge transfer kinetics, and reduced ohmic and transport losses, as evidenced by voltage breakdown and electrochemical impedance spectroscopy analyses. Optimal performance is achieved using a Co 3 O 4 catalyst with a 10 wt % powdered ionomer via the catalystcoated substrate method. Microscopy analyses reveal that electrodes formed with powdered ionomers during fabrication exhibit a more uniform catalyst and ionomer distribution, increased porosity with smaller pore areas, improved electronic conduction with less catalyst agglomeration isolated by a nonconductive ionomer, and enhanced interfacial contact with the membrane and transport layer. These findings highlight that ionomers in a powdered form can promote beneficial properties and are a promising approach to improving AEMWE efficiency.

08 HYDROGEN↗

On-demand formation of Lewis bases for efficient and stable perovskite solar cells

In the fabrication of FAPbI 3 -based perovskite solar cells, Lewis bases play a crucial role in facilitating the formation of the desired photovoltaic α-phase. However, an inherent contradiction exists in their role: they must strongly bind to stabilize the intermediate δ-phase, yet weakly bind for rapid removal to enable phase transition and grain growth. To resolve this conflict, we introduced an on-demand Lewis base molecule formation strategy. This approach utilized Lewis-acid-containing organic salts as synthesis additives, which deprotonated to generate Lewis bases precisely when needed and could be reprotonated back to salts for rapid removal once their role is fulfilled. This method promoted the optimal crystallization of α-phase FAPbI 3 perovskite films, ensuring the uniform vertical distribution of A-site cations, larger grain sizes and fewer voids at buried interfaces. Perovskite solar cells incorporating semicarbazide hydrochloride achieved an efficiency of 26.1%, with a National Renewable Energy Laboratory-certified quasi-steady-state efficiency of 25.33%. These cells retained 96% of their initial efficiency after 1,000 h of operation at 85 °C under maximum power point tracking. Additionally, mini-modules with an aperture area of 11.52 cm 2 reached an efficiency of 21.47%. This strategy is broadly applicable to all Lewis-acid-containing organic salts with low acid dissociation constants and offers a universal approach to enhance the performance of perovskite solar cells and modules.

14 SOLAR ENERGY↗

Quantitative interpretation of the transition voltages in gold-poly(phenylene) thiol-gold molecular junctions

The transition voltage of three different asymmetric Au/poly(phenylene) thiol/Au molecular junctions in which the central molecule is either benzene thiol, biphenyl thiol, or terphenyl thiol is investigated by first-principles quantum transport simulations. For all the junctions, the calculated transition voltage at positive polarity is in quantitative agreement with the experimental values and shows weak dependence on alterations of the Au-phenyl contact. When compared to the strong coupling at the Au-S contact, which dominates the alignment of various molecular orbitals with respect to the electrode Fermi level, the coupling at the Au-phenyl contact produces only a weak perturbation. Therefore, variations of the Au-phenyl contact can only have a minor influence on the transition voltage. These findings not only provide an explanation to the uniformity in the transition voltages found for π-conjugated molecules measured with different experimental methods, but also demonstrate the advantage of transition voltage spectroscopy as a tool for determining the positions of molecular levels in molecular devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis and characterization of nanorods for magnetic rotational spectroscopy

Magnetic rotational spectroscopy (MRS) with magnetic nanoprobes is a powerful method for in-situ characterization of minute amounts of complex fluids. In MRS, a uniformly rotating magnetic field rotates magnetic micro- or nano-probes in the liquid and one analyzes the features of the probe rotation to extract rheological parameters of liquids. Magnetic properties of nanoprobes must be well characterized and understood to make results reliable and reproducible. Ni and Co nanorods synthesized by electrochemical template synthesis in alumina membranes are discussed in applications to MRS. We employ alternating gradient field magnetometry, X-ray diffraction, and magnetic force microscopy to evaluate and compare properties of these nanorods and study their performance as the MRS probes. It is shown that nickel nanorods do not seem to violate any assumptions of the MRS rigid dipole theory, while cobalt nanorods do.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Structural, morphological and Raman studies of pulse electrosynthesised indium antimonide thin films

InSb films deposited on fluorine doped tin oxide (FTO) substrates by a pulse elctrodeposition technique. The deposition was carried out at an applied potential −1.3V versus Ag/AgCl electrode. Structural, morphological and optical studies were performed on the electrodeposited InSb. X-ray diffraction (XRD) studies show that the deposited InSb films are polycrystalline in nature having the zinc blend structure. The crystallite size (D), dislocation density (δ) and strain (ε) were calculated using XRD results. The EDAX analysis shows that chemical composition of In{sup 3+} and Sb{sup 3+} ions is close to the required stoichiometry. The surface morphology of the deposited films was examined using scanning electron microscopy (SEM). SEM studies reveal that the surface of the films is uniformly covered with submicron sized spherical particles. However, the crystallite size determined by the Scherrer method shows a size close to 30 nm. Surface morphology studies of the InSb films were also performed using atomic force microscopy (AFM). The average surface roughness as measured by AFM is around 40 nm. Hot probe studies show that all the electrodeposited thin films have n type conductivity and the thickness of the films is calculated using electrochemical formula.

36 MATERIALS SCIENCE↗

Effect of swift heavy ion irradiation on optical absorption properties of SWCNTs

In the present work, experimental investigations on the optical absorption properties of swift heavy ion irradiated single walled carbon nanotubes (SWCNTs) have been carried out. The uniform thin films of SWCNTs have been deposited on quartz substrate by Langmuir Blodgett (LB) method in a layer by layer manner. The irradiation of thin films is carried out by nickel ion beam of energy 60 MeV at different fluences. The variation in the S{sub 11}, S{sub 22}, and M{sub 11} band in optical spectra of SWCNTs has been studied before and after irradiation. The decrease in intensity/area of the bands corresponding to both semiconducting and metallic SWCNTs has been observed with increasing fluence.

77 NANOSCIENCE AND NANOTECHNOLOGY↗