Search NASA⌕ Search

SEARCH · Search NASA

Results for “BALLISTICS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,657 records · Page 92

Impact ejecta on the moon

The response of a lunar-sized object to the impact of meteoroids no more than about 100 km in radius is studied by means of a numerical model. The partitioning of impact energy into the kinetic and internal energy of the ejecta is obtained by using the conservation of mass, momentum, and energy conservation equations in finite-difference form within an Eulerian framework with approximate equations of state. The calculations are performed for a 15 km/sec impact of an iron object 5 cm in radius on a gabbroic anorthosite surface. Ejecta ballistic analysis is then performed. Most of the material lost escaping the moon is lunar crust material. Only 0.2% of the meteoroid escapes, all in the vapor phase.

Okeefe, J. D.↗

A measurement of the width and shift of the Fe I 3719.94 A line broadened by helium

Results are reported for measurements of the widths and shifts of the overlapping helium-broadened profiles of the Fe I absorption lines at 3719.94 and 3722.56 A, which were performed in a ballistic piston compressor using a saturated solution of FeCl3 in ethanol. It is found that at 4000 K, the 3719.94-A line has a gamma/n (FWHM) value of approximately 5.2 billionths rad/sec per cu cm, the blue shift of this line corresponds to a beta/n value of about 0.49 billionth rad/sec per cu cm, and the 3722.56-A line has the same values. These results are compared with previous experimental determinations and with theoretical calculations of neutral-line broadening for the Fe I lines. The significance of these measurements with respect to the solar spectrum and cool DG white dwarfs is discussed.

Driver, R. D.↗

Numerical analysis of projectile impact in woven texile structures

Computer codes were developed for simulating the dynamic fracture and viscoelastic constitutive response due to stress wave interaction and reflections caused by ballistic impact on woven textiles. The method, which was developed for use in the design and analysis of protection devices for personnel armor, has potential for use in studies of rotor blade burst containment at high velocity. Alterations in coding required for burst containment problems are discussed.

Roylance, D.↗

Solar power satellite. System definition study. Part 1, volume 5: SPS transportation. Representative system descriptions

Both LEO transportation (earth to low earth orbit) and GEO transportation (low earth orbit to geosynchronous orbit) segments were addressed. LEO options include both a 2 stage winged space freighter vehicle and a 2 stage ballistic recoverable vehicle. Both incorporate LO(2)/RP-1/LH(2) engines on the booster and standard SSME's on the upper stage. The orbit transfer vehicle options included chemical for geosynchronous satellite assembly and self powered electric propulsion for low earth orbit satellite assembly. An exhaust products analysis was conducted for the earth to LEO vehicle since atmospheric pollution could be a concern.

Source record↗

Impact resistant boron/aluminum composites for large fan blades

Blade-like specimens were subjected to static ballistic impact testing to determine their relative FOD impact resistance levels. It was determined that a plus or minus 15 deg layup exhibited good impact resistance. The design of a large solid boron/aluminum fan blade was conducted based on the FOD test results. The CF6 fan blade was used as a baseline for these design studies. The solid boron/aluminum fan blade design was used to fabricate two blades. This effort enabled the assessment of the scale up of existing blade manufacturing details for the fabrication of a large B/Al fan blade. Existing CF6 fan blade tooling was modified for use in fabricating these blades.

Oller, T. L.↗

Nitramine smokeless propellant research

A transient ballistics and combustion model is derived to represent the closed vessel experiment that is widely used to characterize propellants. A computer program is developed to solve the time-dependent equations, and is applied to explain aspects of closed vessel behavior. In the case of nitramine propellants the cratering of the burning surface associated with combustion above break-point pressures augments the effective burning rate as deduced from the closed vessel experiment. Low pressure combustion is significantly affected by the ignition process and, in the case of nitramine propellants, by the developing and changing surface structure. Thus, burning rates deduced from the closed vessel experiment may or may not agree with those measured in the equilibrium strand burner. Series of T burner experiments are performed to compare the combustion instability characteristics of nitramine (HMX) containing propellants and ammonium perchlorate (AP)propellants. Although ash produced by more fuel rich propellants could have provided mechanical suppression, results from clean-burning propellants permit the conclusion that HMX reduces the acoustic driving.

Cohen, N. S.↗

Nitramine smokeless propellant research

A transient ballistics and combustion model was derived to represent the closed vessel experiment that is widely used to characterize propellants. The model incorporates the nitramine combustion mechanisms. A computer program was developed to solve the time dependent equations, and was applied to explain aspects of closed vessel behavior. It is found that the rate of pressurization in the closed vessel is insufficient at pressures of interest to augment the burning rate by time dependent processes. Series of T-burner experiments were performed to compare the combustion instability characteristics of nitramine (HMX) containing propellants and ammonium perchlorate (AP) propellants. It is found that the inclusion of HMX consistently renders the propellant more stable.

Source record↗

General heating distributions on the tumbling infinite cylinder

The Shuttle program plans to recover all flight hardware except the External Tank (ET). The ET reentry task requires the quaranteed safe disposal in a remote section and specific footprint of the Indian Ocean or the Antarctic Pacific. The ET is separated from the Orbiter at near orbital speeds and must reenter tumbling, to neutralize lift in an essentially ballistic trajectory. The aerothermodynamic heating becomes an intriguing, complex, and sophisticated series of flow field, boundary layer, and gas dynamic problems that is an important new technology in the reentering disposal task. The singular aspect given in this paper is the general heating distributions for all tumbling attitudes. The objective is to maintain simplicity in form but with variable coefficients to be analytically scaled to account for free molecule, convective laminar and turbulent flow, real gas dissociation or any Reynolds number or Mach number effects.

Carroll, H. R.↗

Spectral line profiles in a planetary corona - A collisional model

An attempt is made to report on an extension of the theory of spectral line profiles for a planetary corona to include the effects of H-H(+) resonant charge exchange in which satellite particles are omitted. A computational procedure is outlined, three classes of particle orbits are distinguished (ballistic, satellite, escaping), and several complications are considered. A collisional profile is obtained, and appropriate collisionless and collisional curves are compared. It is concluded that good profiles could disclose the presence of a nonthermal hydrogen component. Effects of omitting satellite particles are briefly discussed.

Prisco, R. A.↗

Geology of the Imbrium Basin Apennine Mountains and relation to the Apollo 15 landing site

Detailed mapping of the Imbrium Basin Apennine Mountains has emphasized several important factors in the geologic evolution of this region. Pre-Imbrian topography was composed of two types of landforms: (1) the nearby Serenitatis, South Imbrium, Aestuum, and Vaporum basins which produced widely spaced regional lows and a sequence of basin deposits; (2) pre-Imbrian craters that reworked existing basin deposits and produced local topographic lows. The sequence of events during the Imbrium impact can be summarized as follows: intensive structural uplift along the Apennine Front occurred prior to the emplacement of ballistic ejecta. Ejecta became more discontinuous toward the backslope and produced radial texture by sedimentary erosional and depositional processes. Post-ejecta-emplacement downfaulting exposed pre-Imbrian deposits along the front and caused severe seismic disturbances that reworked many of the previous units and accentuated pre-basin structures. Tectonic mapping and orbital geophysical data support the idea that little structural modification has occurred in the Apennines since their formation 3.9 b.y. ago.

Spudis, P.↗

Analytical model of high pressure burning rates in a transient environment

A transient ballistics and combustion model is derived to represent the closed vessel experiment that is widely used to characterize the high pressure burning rates of solid propellants. The model is applied to explain why burning rates deduced from the closed vessel are in basic agreement with those measured from an equilibrium strand burner in the case of homogeneous propellants, but differ significantly in the case of nitramine composite propellants. Thermal profile time lag effects become small at high pressure because the burning rates become high. However, the development of the burning surface structure of those nitramine propellants which exhibit shifts in pressure exponent causes the mass burning rate to lag and then exceed the equilibrium value. It is necessary to consider this mechanism in applications dealing with high pressures and pressurization rates.

Cohen, N. S.↗

High-acceleration cable deployment

Prototype high-acceleration umbilical-cable deployment allows electrical communication between above-ground instrumentation and ballistic projectile below surface. Cable deployment is made up of forebody and afterbody. Foreboy can be separated from afterbody by rocket, or they can be fired as unit at target that stops afterbody on impact (forebody would continue, deploying cable). Similar design could be used in study of sea ice and in other surface-penetration studies.

Barns, C. E.↗

Large engines and vehicles, 1958

During the mid-1950s, the Air Force sponsored work on the feasibility of building large, single-chamber engines, presumably for boost-glide aircraft or spacecraft. In 1956, the Army missile development group began studies of large launch vehicles. The possibilities opened up by Sputnik accelerated this work and gave the Army an opportunity to bid for the leading role in launch vehicles. The Air Force had the responsibility for the largest ballistic missiles and hence a ready-made base for extending their capability for spaceflight. During 1958, actions taken to establish a civilian space agency, and the launch vehicle needs seen by its planners, added a third contender to the space vehicle competition. These activities during 1958 are examined as to how they resulted in the initiation of a large rocket engine and the first large launch vehicle.

Source record↗

Mars penetrator umbilical

The device proposed to gather subsurface data on the planet Mars is a ballistic probe which penetrates the soil after a free fall through the Martian atmosphere. Highlights of the design, development, and testing of several features of the Mars Surface Penetration Probe are outlined.

Barns, C. E.↗

Development of the Trident 1 aerodynamic saike mechanism

The Aerospike drag reduction mechanism was designed and developed for use on the Trident I submarine launched ballistic missile. This mechanism encounters a unique combination of environments necessitating unique design solutions to ensure satisfactory operation over its design life. The development of the Aerospike is reviewed emphasizing the unique and interesting problems encountered and their solutions.

Waterman, M. D.↗

Containment of composite fan blades

A lightweight containment was developed for turbofan engine fan blades. Subscale ballistic-type tests were first run on a number of concepts. The most promising configuration was selected and further evaluated by larger scale tests in a rotating test rig. Weight savings made possible by the use of this new containment system were determined and extrapolated to a CF6-size engine. An analytical technique was also developed to predict the released blades motion when involved in the blade/casing interaction process. Initial checkout of this procedure was accomplished using several of the tests run during the program.

Stotler, C. L.↗

Round-Trip Missions to Low-Delta-V Asteroids and Implications for Material Retrieval

Low-delta-V asteroids are to be found among those which have perihelia near 1 AU. From the 50 known asteroids with perihelia less than 1.5 AU, 10 candidates for asteroid retrieval missions were selected on the basis of low eccentricity and inclination. To estimate the ranges of orbital elements for which capture in earth orbit may be feasible, a survey was made of 180 deg transfer from a set of orbits having elements near those of the earth to the earth. For 2 of the 10 low-delta-V asteroids and for an additional one with elements more earth-like than any yet known, direct ballistic round trips in the 1980's were computed. A stay time of several months at the asteroid was used. The results show that the total delta V, including that for rendezvous with earth upon return, for the known asteroids is above 14 km/sec. But if asteroids are found similar to the strawman considered, the total delta V could be as low as 10 km/sec.

David F Bender↗