Search NASA⌕ Search

SEARCH · Search NASA

Results for “COUPLING NETWORK”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,657 records · Page 92
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Harmonic Modeling, Data Generation and Analysis of Power Electronics-Interfaced Residential Loads

The share of electronics-based residential load is expected to rise as devices such as variable frequency drives (VFDs), electric vehicle chargers, and inverter-based distributed energy resources (DERs), e.g., photovoltaic (PV) systems become more common. These loads may introduce significant harmonics into power networks that need to be closely studied in order to perform accurate load modeling and forecasting. However, it can be difficult to obtain harmonic-rich voltage and current data - necessary for identifying accurate load models - for residential electrical loads. Recognizing this need, we identify and model a set of electronics-based end-use loads and DERs in an electromagnetic transients program (EMTP) tool for a residence with a single- phase split-phase supply. Further, a procedure is developed to model harmonic interactions between end-use loads connected to the same non-ideal supply voltage in a residential setting. Finally, a harmonic-rich dataset produced via the proposed procedure is utilized to identify frequency coupling matrix (FCM) based load model. Numerical results demonstrate the accuracy of the model, and explore model identifiability with limited data points.

harmonics, power quality, load modeling↗
DOE OSTI2023

Final Report DE-FE0031785 Mohsen Ahmadian, Ph.D. Demonstration of Proof of Concept of a Multiphysics Approach for Real-Time Remote Monitoring of Dynamic Changes in Pressure and Salinity in Hydraulically Fractured Networks

Hydraulic fracturing has evolved into a multistep process with varying flow rates, carrier fluids (e.g., gel or slickwater), proppant loadings, and proppant grain sizes. As a result, primary recovery from a hydraulically fractured tight-oil reservoir is often a tiny fraction of the original oil in place, ranging between 5 and 10%. As stated in the FOA1990, “part of this problem is due to the inability of current well completion processes to effectively stimulate the entire reservoir volume in contact with the wellbore. Innovative technologies are needed that can help improve the effectiveness of reservoir completion methods, maximize stimulated reservoir volumes, and optimize recovery over the entire producing life span of a well”. We first need to enhance the current fracture diagnostic techniques to improve a well-completion design. However, detecting and delineating a subsurface hydraulic fracture is extremely difficult because the induced fracture network is only fractionally propped, and these propped fractures are generally very thin. Microseismic and tiltmeter monitoring techniques can provide information on the fracture extent but provide little or no information on the movement and final distribution of proppant or production fluids. On the other hand, electromagnetic (EM) imaging has shown the capability to monitor proppant distribution throughout the fracture area, especially in the presence of Electrically Active Proppants (EAPs). A previous EM survey of hydraulic fracturing at the Devine Fracture Pilot Site (DFPS) and subsequent EM code developments demonstrated this survey as a robust technique to remotely interrogate the extent of the EAP-filled hydraulic fracture during its propagation. The objectives of the project were threefold: (1) to capitalize on the material properties of an EAP to demonstrate remote monitoring of relative changes in pressure, pressure, and flow that are commonly encountered during production from a hydraulically fractured reservoir; (2) to evaluate EM imaging tools, to achieve Objective 1 in near real-time; and (3) to develop a multi-physics joint inversion approach to precisely predict flow patterns and physiochemical changes within an EAP-filled fracture network. This research project was built upon our previous work at the Devine Test Site managed by the Bureau of Economic Geology (BEG) at The University of Texas at Austin (UT-Austin). It also leveraged a significant investment from the Advanced Energy Consortium (AEC) to address the DOE's interest in subsurface flow, containment, and characterization by multiple signals. This three-year and three-month project succeeded in demonstrating the feasibility of a real-time dynamic fluid flow mapping technique at Technology Readiness Level 5 (TRL5) by utilizing a commercially available surface-based Controlled-Source Electromagnetic (CSEM) method (Objectives 1, 2). We demonstrated that injections into an EAP-filled fracture could be successfully coupled with real-time electric field measurements on the surface, leading to remote monitoring of dynamic changes within the EAP-filled fracture. Furthermore, the observed electric field in our study is influenced by bottomhole pressure, flow rate, and salinity, which is demonstrated by comparing these parameters with the electrical field potentials. EM simulations solely based on assumptions of fracture conductivity changes during injection did not reproduce the whole measured electric field magnitudes. Preliminary estimates showed that including Streaming Potential (SP) in our geophysical model is likely needed to reduce the simulation misfit.

02 PETROLEUM↗
NASA NTRS1989

Telescience testbed pilot program, volume 3: Experiment summaries

Space Station Freedom and its associated labs, coupled with the availability of new computing and communications technologies, have the potential for significantly enhancing scientific research. A Telescience Testbed Pilot Program (TTPP), aimed at developing the experience base to deal with issues in the design of the future information system of the Space Station era. The testbeds represented four scientific disciplines (astronomy and astrophysics, earth science, life sciences, and microgravity sciences) and studied issues in payload design, operation, and data analysis. This volume, of a 3 volume set, which all contain the results of the TTPP, presents summaries of the experiments. This experiment involves the evaluation of the current Internet for the use of file and image transfer between SIRTF instrument teams. The main issue addressed was current network response times.

Leiner, Barry M.↗
NASA NTRS1993

Hydrodynamical simulations of star-gas interactions in the interstellar medium with an external gravitational potential

We have calculated 2D models for the global structure of the interstellar medium in a disk galaxy where stars and gas are coupled through star formation, mass loss, stellar heating of the gas, and optically thin radiative cooling. In one set of models, the two dimensions are in the plane of a disk, and for one case, the total size of the region is 1 kpc square. Using a more accurate numerical approach, we confirm the results of Chiang and Bregman (1988) that H I forms into filaments or sheets separated by hotter, more diffuse gas. Although the filaments often have denser subregions, individual clouds of neutral gas are rare. We calculated the vertical distribution of the gas in another set of models where one dimension was in the plane and the other was perpendicular to it. A filament and hot gas network still occurs, although dense neutral complexes are more common and occur near the midplane. The hot gas often cools as it rises, leading to the highest velocity material having both positive and negative velocities. We find other features that are qualitatively similar to observations; for instance, H I 'worms' are produced.

Rosen, Alexander↗
NASA NTRS1993

A strip chart recorder pattern recognition tool kit for Shuttle operations

During Space Shuttle operations, Mission Control personnel monitor numerous mission-critical systems such as electrical power; guidance, navigation, and control; and propulsion by means of paper strip chart recorders. For example, electrical power controllers monitor strip chart recorder pen traces to identify onboard electrical equipment activations and deactivations. Recent developments in pattern recognition technologies coupled with new capabilities that distribute real-time Shuttle telemetry data to engineering workstations make it possible to develop computer applications that perform some of the low-level monitoring now performed by controllers. The number of opportunities for such applications suggests a need to build a pattern recognition tool kit to reduce software development effort through software reuse. We are building pattern recognition applications while keeping such a tool kit in mind. We demonstrated the initial prototype application, which identifies electrical equipment activations, during three recent Shuttle flights. This prototype was developed to test the viability of the basic system architecture, to evaluate the performance of several pattern recognition techniques including those based on cross-correlation, neural networks, and statistical methods, to understand the interplay between an advanced automation application and human controllers to enhance utility, and to identify capabilities needed in a more general-purpose tool kit.

Hammen, David G.↗
NASA NTRSDate not supplied

NASA’s Interest in 3GPP Mobile Telecommunications Protocols for Near Earth Space and the Lunar Surface

In the next several years, NASA intends to return astronauts to the Moon through the Artemis Program. Under Artemis, NASA plans to collaborate with commercial and international partners to establish a long-term presence on the Moon. Near-term Artemis missions will be analogous but much more sophisticated versions of the last couple of Apollo missions. For example, the first area expected to be explored by an Artemis mission is near the south pole as opposed to the mid-latitudes visited by the Apollo astronauts, which makes direct communications with Earth more complicated. Lunar infrastructure will eventually be built over time by many organizations, public and private, to support sustained human exploration, science, and industrial activities on the Moon. A robust lunar communications and navigation infrastructure will be essential to realizing this long-term vision. Meanwhile, on Earth, major advances are being made as5G mobile telecommunications rollout across the globe. Furthermore, the 3rdGeneration Partnership Project (3GPP) is beginning to define future 6G capabilities. NASA envisions a lunar communications and navigation network with capabilities similar to those of communication networks we enjoy here on Earth. Building such a network will require participation by many organizations. NASA’s Tipping Point program seeks industry-developed space technologies that can both foster commercial space capabilities and benefit future NASA missions. This paper provides an overview of NASA’s interest in 3GPPanddescribescurrent work based on 3GPP standards within NASA or funded by NASA, such as Nokia’s upcoming Tipping Point demonstration of 4G/LTE on the lunar surface in early 2023.

Bernard L Edwards↗
DOE OSTI2023

Core-shell structured tow-pregs enabled additive manufacturing of continuously reinforced thermoset composites

One of the major challenges in thermally curable polymer composite additive manufacturing is the slow curing time of thermally curable resins, coupled with a significant drop in thermoset viscosity upon heating, making the formation of complex shapes difficult. To tackle these issues, we have introduced a novel rapid composite preformation strategy called Tow-Preg Cladding (TPC). This technique involves the use of a thin and rapidly curable dual-cure resin, which combines a thermally curable resin (such as epoxy) with a fast photo-curable resin. The dual-cure resin is applied as a coating over a thermally curable resin tow-preg, enabling the formation of a rigid cladding that supports and shapes the tow-pregs into the desired geometries and patterns. The key advantage of this approach lies in the sequential formation of an interpenetrating polymer network (IPN) at the interlayer between laminates, resulting from the curing of the photocurable resin and the thermally curable resin sequentially. This IPN formation enhances interlaminar bonding in the composite, contributing to its overall strength and performance. The composites produced using this technique exhibited impressive mechanical properties, including longitudinal tensile strength of 1058.2 MPa, longitudinal tensile modulus of 74.2 GPa, flexural strength of 1080.4 MPa, and flexural modulus of 41.7 GPa. Overall, our Tow-Preg Cladding approach shows great promise in overcoming the challenges associated with thermally curable polymer composite additive manufacturing. It offers a viable solution to creating strong, shape-specific thermoset composites efficiently with enhanced mechanical properties.

42 ENGINEERING↗
DOE OSTI2025

Molecular diversity of dissolved organic matter reflects macroecological patterns in river networks

Deciphering dissolved organic matter (DOM) molecular complexity is crucial for understanding ecosystem function. Using the continental-scale Worldwide Hydrobiogeochemistry Observation Network for Dynamic Rivers Systems (WHONDRS) Fourier-transform ion cyclotron resonance mass spectrometry (FTICR-MS) dataset, we reveal fundamental scaling patterns of DOM chemodiversity with watershed characteristics. Analysis of 54 river sites shows local and regional watershed features significantly influence DOM chemodiversity (2500–8718 unique formulae), exhibiting consistent scaling patterns across compound classes and a novel latitudinal gradient (decreasing diversity with increasing latitude). Scaling relationships for DOM composition vary by compound class. Crucially, the scaling parameters (B, baseline chemodiversity; Z, sensitivity) are linearly interrelated. This B–Z relationship is most robust for potentially bio-labile carbohydrates (coefficient of determination R 2 ≈ 0.85), diminishing for recalcitrant, plant-derived molecules (such as lignin), and indicates (potential) biolability-dependent coupling between baseline diversity and environmental responsiveness. These quantitative scaling relationships, with scaling exponents ranging from − 2.1 to 2.2 across compound classes, enable prediction of DOM composition across watersheds, offering a framework to understand ecosystem responses to environmental change. This research bridges biogeochemistry and ecology, providing tools to anticipate molecular transformations across scales.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRS2009

Large-Aperture Membrane Active Phased-Array Antennas

Large-aperture phased-array microwave antennas supported by membranes are being developed for use in spaceborne interferometric synthetic aperture radar systems. There may also be terrestrial uses for such antennas supported on stationary membranes, large balloons, and blimps. These antennas are expected to have areal mass densities of about 2 kg/sq m, satisfying a need for lightweight alternatives to conventional rigid phased-array antennas, which have typical areal mass densities between 8 and 15 kg/sq m. The differences in areal mass densities translate to substantial differences in total mass in contemplated applications involving aperture areas as large as 400 sq m. A membrane phased-array antenna includes patch antenna elements in a repeating pattern. All previously reported membrane antennas were passive antennas; this is the first active membrane antenna that includes transmitting/receiving (T/R) electronic circuits as integral parts. Other integral parts of the antenna include a network of radio-frequency (RF) feed lines (more specifically, a corporate feed network) and of bias and control lines, all in the form of flexible copper strip conductors on flexible polymeric membranes. Each unit cell of a prototype antenna (see Figure 1) contains a patch antenna element and a compact T/R module that is compatible with flexible membrane circuitry. There are two membrane layers separated by a 12.7-mm air gap. Each membrane layer is made from a commercially available flexible circuit material that, as supplied, comprises a 127-micron-thick polyimide dielectric layer clad on both sides with 17.5-micron-thick copper layers. The copper layers are patterned into RF, bias, and control conductors. The T/R module is located on the back side of the ground plane and is RF-coupled to the patch element via a slot. The T/R module is a hybrid multilayer module assembled and packaged independently and attached to the membrane array. At the time of reporting the information for this article, an 8 16 passive array (not including T/R modules) and a 2 4 active array (including T/R modules) had been demonstrated, and it was planned to fabricate and test larger arrays.

Karasik, Boris↗
DOE OSTI2021

Machine-learning predictions of the shale wells’ performance

The ultra-low permeability nature of shale reservoirs leads to an extended linear flow and necessitates horizontal wells with multi-stage engineered fractures to efficiently extract hydrocarbons resources. These artificially-generated and naturally-occurring fractures form complex networks that create complex flow regimes which control oil production. These fractures are neither identical nor equally-spaced, which leads to a production profile with a masked onset of the boundary-dominated flow. The combination of the extended linear flow with the indeterminate onset of the boundary-dominated flow challenges the current deterministic analytic approaches to forecast the estimated ultimate recovery (EUR). In this work, we propose a novel machine-learning approach which overcomes these challenges and provides reliable EUR estimates based on field-wide analyses. We implement a novel unsupervised machine learning (ML) methodology, which allows for automatic identification of the optimal number of features (signals) present in the data based on non-negative matrix/tensor factorization coupled with k-means clustering incorporating regularization and physics constraints. In the presented analyses, the input data to the ML algorithm is the available (public) production history from the field collected at existing unconventional reservoirs. We validate our approach through hindcasting of the production data, where we achieved an excellent agreement. In addition, our approach is able to identify the poorly-performing wells, which could benefit from early refracing. Our approach provides fast and accurate estimations of the well performance without presumptions about the state of the well or the flow regime.

03 NATURAL GAS↗
NASA NTRS2006

Spitzer Space Telescope Sequencing Operations Software, Strategies, and Lessons Learned

The Space Infrared Telescope Facility (SIRTF) was launched in August, 2003, and renamed to the Spitzer Space Telescope in 2004. Two years of observing the universe in the wavelength range from 3 to 180 microns has yielded enormous scientific discoveries. Since this magnificent observatory has a limited lifetime, maximizing science viewing efficiency (ie, maximizing time spent executing activities directly related to science observations) was the key operational objective. The strategy employed for maximizing science viewing efficiency was to optimize spacecraft flexibility, adaptability, and use of observation time. The selected approach involved implementation of a multi-engine sequencing architecture coupled with nondeterministic spacecraft and science execution times. This approach, though effective, added much complexity to uplink operations and sequence development. The Jet Propulsion Laboratory (JPL) manages Spitzer s operations. As part of the uplink process, Spitzer s Mission Sequence Team (MST) was tasked with processing observatory inputs from the Spitzer Science Center (SSC) into efficiently integrated, constraint-checked, and modeled review and command products which accommodated the complexity of non-deterministic spacecraft and science event executions without increasing operations costs. The MST developed processes, scripts, and participated in the adaptation of multi-mission core software to enable rapid processing of complex sequences. The MST was also tasked with developing a Downlink Keyword File (DKF) which could instruct Deep Space Network (DSN) stations on how and when to configure themselves to receive Spitzer science data. As MST and uplink operations developed, important lessons were learned that should be applied to future missions, especially those missions which employ command-intensive operations via a multi-engine sequence architecture.

missions operations↗
DOE OSTI2026

Machine learning surrogates for ion energy–angle distributions in thermal and RF plasma sheaths

Ion energy–angle distributions (IEADs) at material surfaces are a critical input for plasma–material interaction (PMI) studies in fusion devices, yet they are computationally expensive to obtain using particle-in-cell (PIC) simulations. In this work, we develop a machine learning surrogate based on a deep deconvolutional neural network (DDeCNN) trained on large databases generated with the hPIC2 code. The surrogate is capable of reconstructing IEADs from sheath parameters for both thermal and radio-frequency (RF) plasmas, including cases with multiple ion species. Across thousands of test cases, the model achieves high accuracy, with over 97 % of predictions classified as good or average based on standard error metrics (MAE, MSE, L2). Even in the more challenging RF and multi-species regimes, the surrogate reliably captures the multi-peak structure of PIC results. Once trained, the surrogate produces IEADs in milliseconds on a common workstation, yielding speedups of six to seven orders of magnitude compared with running a full PIC simulation. This computational gain enables dense parameter scans and direct coupling of IEAD predictions with PMI and erosion models on whole-device scales in fusion-relevant conditions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Towards complete assignment of the infrared spectrum of the protonated water cluster H + (H 2 O) 21

The spectroscopic features of protonated water species in dilute acid solutions have been long sought after for understanding the microscopic behavior of the proton in water with gas-phase water clusters H + (H 2 O) n extensively studied as bottom-up model systems. We present a new protocol for the calculation of the infrared (IR) spectra of complex systems, which combines the fragment-based Coupled Cluster method and anharmonic vibrational quasi-degenerate perturbation theory, and demonstrate its accuracy towards the complete and accurate assignment of the IR spectrum of the H + (H 2 O) 21 cluster. The site-specific IR spectral signatures reveal two distinct structures for the internal and surface four-coordinated water molecules, which are ice-like and liquid-like, respectively. The effect of inter-molecular interaction between water molecules is addressed, and the vibrational resonance is found between the O-H stretching fundamental and the bending overtone of the nearest neighboring water molecule. The revelation of the spectral signature of the excess proton offers deeper insight into the nature of charge accommodation in the extended hydrogen-bonding network underpinning this aqueous cluster.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Monomer-dimer tensor-network basis for qubit-regularized lattice gauge theories

Traditional SU⁡(𝑁) lattice gauge theories (LGTs) can be formulated using an orthonormal basis constructed from the irreducible representations (irreps) 𝑉 𝜆 of the SU⁡(𝑁) gauge symmetry. On a lattice, the elements of this basis are tensor networks comprising dimer tensors on the links labeled by a set of irreps {𝜆 ℓ } and monomer tensors on sites labeled by {𝜆 𝑠 }. These tensors naturally define a local site Hilbert space, ℋ$^𝑔_𝑠$, on which gauge transformations act. Gauss’s law introduces an additional index 𝛼 𝑠 =1,2,…,𝒟⁡(ℋ$^𝑔_𝑠$) that labels an orthonormal basis of the gauge-invariant subspace of ℋ$^𝑔_𝑠$. This monomer-dimer tensor-network (MDTN) basis, |{𝜆 𝑠 },{𝜆 ℓ },{𝛼 𝑠 }⟩, of the physical Hilbert space enables the construction of new qubit-regularized SU⁡(𝑁) gauge theories that are free of sign problems while preserving key features of traditional LGTs. Here, we investigate finite-temperature confinement-deconfinement transitions in a simple qubit-regularized SU(2) and SU(3) gauge theory in 𝑑 =2 and 𝑑 =3 spatial dimensions, formulated using the MDTN basis, and show that they reproduce the universal results of traditional LGTs at these transitions. Additionally, in 𝑑 =1, we demonstrate using a plaquette chain that the string tension at zero temperature can be continuously tuned to zero by adjusting a model parameter that plays the role of the gauge coupling in traditional LGTs.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
NASA NTRS2014

Hindlimb Suspension as a Model to Study Ophthalmic Complications in Microgravity Status Report: Optimization of Rat Retina Flat Mounts Staining to Study Vascular Remodeling

Preliminary data from a prior tissue‐sharing experiment has suggested that early growth response protein‐1 (Egr1), a transcription factor involved in various stress responses in the vasculature, is induced in the rat retina after 14 days of hindlimb suspension (HS) and may be evidence that mechanical stress is occurring secondary to the cephalad fluid shift. This mechanical stress could cause changes in oxygenation of the retina, and the subsequent ischemia‐ or inflammation‐driven hypoxia may lead to microvascular remodeling. This microvascular remodeling process can be studied using image analysis of retinal vessels and can be then be quantified by the VESsel GENeration Analysis (VESGEN) software, a computational tool that quantifies remodeling patterns of branching vascular trees and capillary or vasculogenic networks. Our project investigates whether rodent HS is a valid model to study the effects of simulated‐weightlessness on ocular structures and their relationship with intracranial pressure (ICP). One of the hypotheses to be tested is that HS‐induced cephalad fluid shift is accompanied by vascular engorgement that produces changes in retinal oxygenation, leading to oxidative stress, hypoxia, microvascular remodeling, and cellular degeneration. We have optimized the procedure to obtain flat mounts of rat retina, staining of the endothelial lining in vasculature and acquisition of high quality images suitable for VESGEN analysis. Briefly, eyes were fixed in 4% paraformaldehyde for 24 hours and retinas were detached and then mounted flat on microscope slides. The microvascular staining was done with endothelial cell‐specific isolectin binding, coupled to Alexa‐488 fluorophore. Image acquisition at low magnification and high resolution was performed using a new Leica SP8 confocal microscope in a tile pattern across the X,Y plane and multiple sections along the Z‐axis. This new confocal microscope has the added capability of dye separation using the Linear Unmixing method and allows us to remove the autofluorescence originating from the photoreceptor layer. In summary, we have an improved method for studying the retinal microvasculature that will provide an increase in the quality of images captured and will be applied throughout the various animal cohorts of the recentlyinitiated study that will evaluate rodent HS as a model to study ophthalmic complications in microgravity.

Theriot, Corey A.↗
NASA NTRS2019

Assimilation of Aerosol Observations in the NASA GEOS Model

In the GEOS near real-time system, as well as in MERRA-2 which is the latest reanalysis produced at NASA's Global Modeling Assimilation Office (GMAO), the assimilation of aerosol observations is performed by means of a so-called analysis splitting method. The prognostic model is based on the GEOS model radiatively coupled to GOCART aerosol module and includes assimilation of bias-corrected Aerosol Optical Depth (AOD) at 550 nm from various space-based remote sensing platforms. In line with the transition of the GEOS meteorological data assimilation system to a hybrid Ensemble-Variational formulation, we are updating the aerosol component of our assimilation system to a variational ensemble type of scheme. In this talk we will examine the impact of replacing the current analysis splitting scheme with this new approach. Starting with the assimilation of satellite based single-channel retrievals; we will discuss the impact of this aerosol data assimilation technique on the 3D aerosol distributions by means of innovation statistics and verification against independent datasets such as the Aerosol Robotic Network (AERONET) and surface PM2.5. We will also present preliminary results related to the introduction of new aerosol data types in GEOS, including multi-spectral AOD retrievals.

AERONET↗
DOE OSTI2022

Easy-plane spin Hall nano-oscillators as spiking neurons for neuromorphic computing

Here we show analytically using a macrospin approximation that easy-plane spin Hall nano-oscillators excited by a spin current polarized perpendicularly to the easy plane have phase dynamics analogous to that of Josephson junctions. Similarly to Josephson junctions, they can reproduce the spiking behavior of biological neurons that is appropriate for neuromorphic computing. To take advantage of typical spin-orbit torques, we use a nanoconstriction geometry, in which the magnetostatic interaction and magnetocrystalline anisotropy are tuned to create an easy plane that includes the interface normal direction. We perform micromagnetic simulations of such oscillators realized in this geometry and show that the easy-plane spiking dynamics is preserved in this experimentally feasible architecture. Finally we simulate two elementary neural network blocks that implement operations essential for neuromorphic computing. First, we show that output spikes energies from two neurons can be summed and injected into a following layer neuron and second, we demonstrate that outputs can be multiplied by synaptic weights implemented by locally modifying the anisotropy.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Global Phase and Magnitude Synchronization of Coupled Oscillators With Application to the Control of Grid-Forming Power Inverters

In this paper, we explore a new approach to synchronization of coupled oscillators. In contrast to the celebrated Kuramoto model, we do not work in polar coordinates and do not consider oscillations of fixed magnitude. We propose a synchronizing feedback based on relative state information and local measurements that induces consensus-like dynamics. We show that, under a mild stability condition, the combination of the synchronizing feedback with a decentralized magnitude control law renders the oscillators' almost globally asymptotically stable with respect to set points for the phase shift, frequency, and magnitude. We apply these result to rigorously solve an open problem in control of inverter-based ac power systems. In this context, the proposed control strategy can be implemented using purely local information, induces a grid-forming behavior, and ensures that a network of ac power inverters is almost globally asymptotically stable with respect to a prespecified solution of the ac power-flow equations. Moreover, we show that the controller exhibits a droop-like behavior around the standard operating point, thus, making it backward compatible with the existing power system operation.

24 POWER TRANSMISSION AND DISTRIBUTION↗