Search NASA⌕ Search

SEARCH · Search NASA

Results for “Capacitance”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,657 records · Page 92

Determination of effective work function of Pr{sub 0.7}Ca{sub 0.3}MnO{sub 3} and Pt films on ZrO{sub x} using terraced-oxide method

We have determined the effective work function ({Phi}{sub m,eff}) of thin-film sputter-deposited Pr{sub 0.7}Ca{sub 0.3}MnO{sub 3} (PCMO) on atomic-layer-deposited ZrO{sub x}. Pt/PCMO/ZrO{sub x}/SiO{sub 2}/Si and Pt/ZrO{sub x}/SiO{sub 2}/Si metal-oxide-semiconductor (MOS) capacitors were fabricated. The {Phi}{sub m,eff} were extracted from capacitance-voltage curves of the MOS capacitors by using flat-band voltage versus effective-oxide-thickness plots. PCMO was crystallized using a high-temperature anneal step and crystallinity was confirmed by x-ray diffraction and transmission electron microscopy. {Phi}{sub m,eff} of polycrystalline PCMO and Pt on ZrO{sub x} was determined to be 5.43 eV and 5.40 eV, respectively. The significantly higher {Phi}{sub m,eff} of PCMO is attributed to the presence of oxygen-rich PCMO(002)/ZrO{sub x} interfaces as indicated by our density-functional-theory calculations.

36 MATERIALS SCIENCE↗

Impact of proton irradiation on deep level states in n-GaN

Deep levels in 1.8 MeV proton irradiated n-type GaN were systematically characterized using deep level transient spectroscopies and deep level optical spectroscopies. The impacts of proton irradiation on the introduction and evolution of those deep states were revealed as a function of proton fluences up to 1.1 × 10{sup 13} cm{sup −2}. The proton irradiation introduced two traps with activation energies of E{sub C} - 0.13 eV and 0.16 eV, and a monotonic increase in the concentration for most of the pre-existing traps, though the increase rates were different for each trap, suggesting different physical sources and/or configurations for these states. Through lighted capacitance voltage measurements, the deep levels at E{sub C} - 1.25 eV, 2.50 eV, and 3.25 eV were identified as being the source of systematic carrier removal in proton-damaged n-GaN as a function of proton fluence.

36 MATERIALS SCIENCE↗

Interfacial band configuration and electrical properties of LaAlO{sub 3}/Al{sub 2}O{sub 3}/hydrogenated-diamond metal-oxide-semiconductor field effect transistors

In order to search a gate dielectric with high permittivity on hydrogenated-diamond (H-diamond), LaAlO{sub 3} films with thin Al{sub 2}O{sub 3} buffer layers are fabricated on the H-diamond epilayers by sputtering-deposition (SD) and atomic layer deposition (ALD) techniques, respectively. Interfacial band configuration and electrical properties of the SD-LaAlO{sub 3}/ALD-Al{sub 2}O{sub 3}/H-diamond metal-oxide-semiconductor field effect transistors (MOSFETs) with gate lengths of 10, 20, and 30 μm have been investigated. The valence and conduction band offsets of the SD-LaAlO{sub 3}/ALD-Al{sub 2}O{sub 3} structure are measured by X-ray photoelectron spectroscopy to be 1.1 ± 0.2 and 1.6 ± 0.2 eV, respectively. The valence band discontinuity between H-diamond and LaAlO{sub 3} is evaluated to be 4.0 ± 0.2 eV, showing that the MOS structure acts as the gate which controls a hole carrier density. The leakage current density of the SD-LaAlO{sub 3}/ALD-Al{sub 2}O{sub 3}/H-diamond MOS diode is smaller than 10{sup −8} A cm{sup −2} at gate bias from −4 to 2 V. The capacitance-voltage curve in the depletion mode shows sharp dependence, small flat band voltage, and small hysteresis shift, which implies low positive and trapped charge densities. The MOSFETs show p-type channel and complete normally off characteristics with threshold voltages changing from −3.6 ± 0.1 to −5.0 ± 0.1 V dependent on the gate length. The drain current maximum and the extrinsic transconductance of the MOSFET with gate length of 10 μm are −7.5 mA mm{sup −1} and 2.3 ± 0.1 mS mm{sup −1}, respectively. The enhancement mode SD-LaAlO{sub 3}/ALD-Al{sub 2}O{sub 3}/H-diamond MOSFET is concluded to be suitable for the applications of high power and high frequency electrical devices.

36 MATERIALS SCIENCE↗

Electrical characterization of ensemble of GaN nanowires grown by the molecular beam epitaxy technique

High quality Schottky contacts are formed on GaN nanowires (NWs) structures grown by the molecular beam epitaxy technique on Si(111) substrate. The current-voltage characteristics show the rectification ratio of about 10{sup 3} and the leakage current of about 10{sup −4} A/cm{sup 2} at room temperature. From the capacitance-voltage measurements the free carrier concentration in GaN NWs is determined as about 10{sup 16} cm{sup −3}. Two deep levels (H200 and E280) are found in the structures containing GaN NWs. H200 is attributed to an extended defect located at the interface between the substrate and SiN{sub x} or near the sidewalls at the bottom of the NWs whereas E280 is tentatively assigned to a gallium-vacancy- or nitrogen interstitials-related defect.

36 MATERIALS SCIENCE↗

The role of ZrN capping layer deposited on ultra-thin high-k Zr-doped yttrium oxide for metal-gate metal–insulator–semiconductor applications

Metal-gate MIS structures with and without ZrN capping layer on high-k Y{sub 2}O{sub 3}:Zr/Y{sub 2}O{sub 3} stack were fabricated. The binding energies and depth profiles were investigated by x-ray photoelectron spectroscopy (XPS). The x-ray diffraction (XRD) patterns were compared. It is found that Ti out-diffusion into Zr-based high-k dielectric becomes lesser with the insertion of ZrN capping layer. The electrical properties of current-voltage (I-V) and capacitance-voltage (C-V) characteristics were measured in the postannealing temperature range of 550–850 °C. According to the defect reaction model, Zr cation vacancies are associated with the concentration of Ti ion by a transition from +3 to +2 states. The amount of Zr cation vacancies is quantified and equal to a half of Ti substitution amount at Zr site. The reduction in cation vacancies at high temperatures can well explain the decrease in ΔV{sub FB} for samples with ZrN layer. In contrast, an excess of Ti outdiffusion will produce the interstitial defects in high-k films without ZrN capping.

36 MATERIALS SCIENCE↗

Charging process of polyurethane based composites under electronic irradiation: Effects of cellulose fiber content

The study deals with the charging effect of polyurethanes-based composites reinforced with cellulose fibers, under electronic beam irradiation in a scanning electron microscope. The results indicate that the leakage current and the trapped charge as well as the kinetics of charging process significantly change beyond a critical concentration of 10% cellulose fibers. These features are correlated with the cellulose concentration-dependence of the electrical properties, specifically resistivity and capacitance, of the composite.

36 MATERIALS SCIENCE↗

Analysis of defects in GaAsN grown by chemical beam epitaxy on high index GaAs substrates

The lattice defects in GaAsN grown by chemical beam epitaxy on GaAs 311B and GaAs 10A toward [110] were characterized and discussed by using deep level transient spectroscopy (DLTS) and on the basis of temperature dependence of the junction capacitances (C{sub J}). In one hand, GaAsN films grown on GaAs 311B and GaAs 10A showed n-type and p-type conductivities, respectively although the similar and simultaneous growth conditions. This result is indeed in contrast to the common known effect of N concentration on the type of conductivity, since the surface 311B showed a significant improvement in the incorporation of N. Furthermore, the temperature dependence of C{sub J} has shown that GaAs 311B limits the formation of N-H defects. In the other hand, the energy states in the forbidden gap of GaAsN were obtained. Six electron traps, E1 to E6, were observed in the DLTS spectrum of GaAsN grown on GaAs 311B, with apparent activation energies of 0.02, 0.14, 0.16, 0.33, 0.48, and 0.74 eV below the bottom edge of the conduction band, respectively. In addition, four hole traps, H1 to H4, were observed in the DLTS spectrum of GaAsN grown on GaAs 10A, with energy depths of 0.13, 0.20, 0.39, and 0.52 eV above the valence band maximum of the alloy, respectively. Hence, the surface morphology of the GaAs substrate was found to play a key factor role in clarifying the electrical properties of GaAsN grown by CBE.

36 MATERIALS SCIENCE↗

Electrical properties of Si/Si interfaces by using surface-activated bonding

Electrical properties of n-Si/n-Si, p-Si/n-Si, and p{sup −}-Si/n{sup +}-Si junctions fabricated by using surface-activated-bonding are investigated. The transmission electron microscopy/energy dispersive X-ray spectroscopy of the n-Si/n-Si interfaces reveals no evidence of oxide layers at the interfaces. From the current-voltage (I-V) and the capacitance-voltage (C-V) characteristics of the p-Si/n-Si and p{sup −}-Si/n{sup +}-Si junctions, it is found that the interface states, likely to have formed due to the surface activation process using Ar plasma, have a more marked impact on the electrical properties of the p-Si/n-Si junctions. An analysis of the temperature dependence of the I-V characteristics indicates that the properties of carrier transport across the bonding interfaces for reverse-bias voltages in the p-Si/n-Si and p{sup −}-Si/n{sup +}-Si junctions can be explained using the trap-assisted-tunneling and Frenkel-Poole models, respectively.

36 MATERIALS SCIENCE↗

Trap states in AlGaN channel high-electron-mobility transistors

Frequency dependent capacitance and conductance measurements were performed to analyze the trap states in the AlGaN channel high-electron-mobility transistors (HEMTs). The trap state density in the AlGaN channel HEMTs decreases from 1.26 × 10{sup 13} cm{sup −2}eV{sup −1} at the energy of 0.33 eV to 4.35 × 10{sup 11} cm{sup −2}eV{sup −1} at 0.40 eV. Compared with GaN channel HEMTs, the trap states in the AlGaN channel HEMTs have deeper energy levels. The trap with deeper energy levels in the AlGaN channel HEMTs is another reason for the reduction of the reverse gate leakage current besides the higher Schottky barrier height.

74 ATOMIC AND MOLECULAR PHYSICS↗

In-growth of an electrically active defect in high-purity silicon after proton irradiation

Defect-related energy levels in the lower half of the band gap of silicon have been studied with transient-capacitance techniques in high-purity, carbon and oxygen lean, plasma-enhanced chemical-vapor deposition grown, n-and p-type silicon layers after 2-MeV proton irradiations at temperatures at or just below room temperature. The in-growth of a distinct line in deep-level transient spectroscopy spectra, corresponding to a level in the band gap at E{sub V} + 0.357 eV where E{sub V} is the energy of the valence band edge, takes place for anneal temperatures at around room temperature with an activation energy of 0.95 ± 0.08 eV. The line disappears at an anneal temperature of around 450 K. The corresponding defect is demonstrated not to contain boron, carbon, oxygen, or phosphorus. Possible defect candidates are discussed.

36 MATERIALS SCIENCE↗

Polymer defect states modulate open-circuit voltage in bulk-heterojunction solar cells

Defect states influence the operation of organic solar cells altering transport, recombination, and energetic mechanisms. This work investigates how processing conditions induce morphology-related, electrically active defects in the donor polymer of bulk-heterojunction solar cells. Structural order is inferred from absorption and X-ray diffraction data, while defect density is determined from capacitance methods. A correlation is observed between the polymer nanocrystallite size, the defect concentration, and the output voltage. For the case of poly(3-hexylthiophene), processing that promote crystallinity is beneficial for the device performance as it decreases the defect density (energy disorder) that finally enlarges the maximum achievable open-circuit voltage. Defect states within the effective bandgap modulate the downshift of the hole Fermi level upon illumination that in turn establishes the achievable open-circuit voltage.

36 MATERIALS SCIENCE↗

Effect of reduction of trap charge carrier density in organic field effect transistors by surface treatment of dielectric layer

In this work, we have studied the effect of surface treatment of SiO{sub 2} dielectric layer on the reduction of the trap charge carrier density at dielectric/semiconducting interface by fabricating a metal–insulator–semiconductor (MIS) device using α, ω-dihexylcarbonylquaterthiophene as semiconducting layer. SiO{sub 2} dielectric layer has been treated with 1,1,1,3,3,3-hexamethyldisilazane (HMDS) to modify the chemical group acting as charge traps. Capacitance-voltage measurements have been performed on MIS devices fabricated on SiO{sub 2} and HMDS treated SiO{sub 2}. These data have been used for the calculation of trap charge carrier density and Debye length at the dielectric-semiconductor interface. The calculated trap charge carrier density has been found to reduce from (2.925 ± 0.049) × 10{sup 16} cm{sup −3} to (2.025 ± 0.061) × 10{sup 16} cm{sup −3} for the MIS device with HMDS treated SiO{sub 2} dielectric in comparison to that of untreated SiO{sub 2}. Next, the effect of reduction in trap charge carrier density has been studied on the performance of organic field effect transistors. The improvement in the device parameters like mobility, on/off ratio, and gate leakage current has been obtained with the effect of the surface treatment. The charge carrier mobility has been improved by a factor of 2 through this treatment. Further, the influence of the treatment was observed by atomic force microscope and Fourier transform infrared spectroscopy techniques.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of packing material on methane activation in a dielectric barrier discharge reactor

The conversion of methane is measured in a planar-type dielectric barrier discharge reactor using γ-Al{sub 2}O{sub 3} (sphere), α-Al{sub 2}O{sub 3} (sphere), and γ-Al{sub 2}O{sub 3} (16–20 mesh). Investigations on the surface properties and shape of the three packing materials clearly indicate that methane activation is considerably affected by the material used. Capacitances inside the discharge gap are estimated from charge–voltage plots, and a comparison of the generated and transferred charges for different packing conditions show that the difference in surface properties between γ- and α-phase Al{sub 2}O{sub 3} affects the discharge characteristics. Moreover, all packing conditions show different charge characteristics that are related to the electron density. Finally, the packing material's shape affects the local electron temperature, which is strongly related to methane conversion. The combined results indicate that both microscale and macroscale variations in a packing material affect the discharge characteristics, and a packing material should be considered carefully for effective methane activation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Surface morphology and electrical transport of rapid thermal annealed chromium-doped indium zinc oxides: The influence of zinc interstitials and out-diffusion

We investigate the complex impedance (CI) spectra of chromium-doped indium zinc oxide (CIZO) films with different rapid thermal annealing (RTA) temperatures. The CI spectra drawn from the impedance contributions of Zn-O and In-O bondings in CIZO films were analyzed by two sets of parallel resistance and capacitance components in series. The result demonstrates that zinc interstitials controls electron concentration and transition of electrical transport from semiconducting to metallic. At higher RTA temperature, high-density zinc interstitial promotes Zn atom diffusion from the surface, modifying surface morphology.

36 MATERIALS SCIENCE↗

Characteristics of ultra low-k nanoporous and fluorinated silica based films prepared by plasma enhanced chemical vapor deposition

Low dielectric constant (low-k) silica based films were deposited on p-type silicon and polycarbonate substrates by radio frequency (RF) plasma enhanced chemical vapor deposition method at low temperature. A mixture of tetraethoxysilane vapor, oxygen, and tetrafluoromethane (CF{sub 4}) was used for the deposition of the films in forms of two structures called as SiO{sub x}C{sub y} and SiO{sub x}C{sub y}F{sub z}. Properties of the films were controlled by amount of porosity and fluorine content in the film matrix. The influence of RF power and CF{sub 4} flow on the elemental composition, deposition rate, surface roughness, leakage current, refractive index, and dielectric constant of the films were characterized. Moreover, optical emission spectroscopy was applied to monitor the plasma process at the different parameters. Electrical characteristics of SiO{sub x}C{sub y} and SiO{sub x}C{sub y}F{sub z} films with metal-oxide-semiconductor structure were investigated using current-voltage analysis to measure the leakage current and breakdown field, as well as capacitance-voltage analysis to obtain the film's dielectric constant. The results revealed that SiO{sub x}C{sub y} films, which are deposited at lower RF power produce more leakage current, meanwhile the dielectric constant and refractive index of these films decreased mainly due to the more porosity in the film structure. By adding CF{sub 4} in the deposition process, fluorine, the most electronegative and the least polarized atom, doped into the silica film and led to decrease in the refractive index and the dielectric constant. In addition, no breakdown field was observed in the electrical characteristics of SiO{sub x}C{sub y}F{sub z} films and the leakage current of these films reduced by increment of the CF{sub 4} flow.

36 MATERIALS SCIENCE↗

Improved interfacial and electrical properties of vanadyl-phthalocyanine metal-insulator-semiconductor devices with silicon nitride as gate insulator

We have investigated the interfacial and electrical properties of vanadyl-phthalocyanine (VOPc) metal-insulator-semiconductor devices by the measurement of capacitance and conductance. The devices have been fabricated on ordered para-sexiphenyl (p-6P) layer with silicon nitride (SiN{sub x}) as gate insulator. The VOPc/p-6P/SiN{sub x} devices have shown a negligible hysteresis, low series resistance, and high operated frequency. Bulk traps have been distinguished from interface traps by two loss peaks in conductance measurement. Trap densities and distribution of trap energy level have been obtained. The improved properties indicate that VOPc/ p-6P devices with SiN{sub x} insulator hold a great promise of application in flexible displays.

36 MATERIALS SCIENCE↗

Subcutaneous oxidation of In{sub 0.53}Ga{sub 0.47}As(100) through ultra-thin atomic layer deposited Al{sub 2}O{sub 3}

Stability of oxide/semiconductor interfaces during device fabrication is critically important, particularly for adoption of new semiconductor channel materials, such as III-V compounds. Unintentional oxidation of an underlying In{sub 0.53}Ga{sub 0.47}As(100) surface through atomic layer deposited (ALD) Al{sub 2}O{sub 3} layers of varying thickness is investigated. Oxygen annealing of 1 ∼ 2 nm thickness Al{sub 2}O{sub 3} layers at 300 °C or higher and large-dose water vapor exposure during the ALD-Al{sub 2}O{sub 3} process at 300 °C produces InGaAs surface oxidation. This subcutaneous oxidation of InGaAs increases the Al{sub 2}O{sub 3}/InGaAs interface defect density as observed in suppressed band-edge photoluminescence and in capacitance-voltage analysis, possibly by creating As dangling bonds at the InGaAs surface.

36 MATERIALS SCIENCE↗

Characterization of interface states in Al{sub 2}O{sub 3}/AlGaN/GaN structures for improved performance of high-electron-mobility transistors

We have investigated the relationship between improved electrical properties of Al{sub 2}O{sub 3}/AlGaN/GaN metal-oxide-semiconductor high-electron-mobility transistors (MOS-HEMTs) and electronic state densities at the Al{sub 2}O{sub 3}/AlGaN interface evaluated from the same structures as the MOS-HEMTs. To evaluate Al{sub 2}O{sub 3}/AlGaN interface state densities of the MOS-HEMTs, two types of capacitance-voltage (C-V) measurement techniques were employed: the photo-assisted C-V measurement for the near-midgap states and the frequency dependent C-V characteristics for the states near the conduction-band edge. To reduce the interface states, an N{sub 2}O-radical treatment was applied to the AlGaN surface just prior to the deposition of the Al{sub 2}O{sub 3} insulator. As compared to the sample without the treatment, the N{sub 2}O-radical treated Al{sub 2}O{sub 3}/AlGaN/GaN structure showed smaller frequency dispersion of the C-V curves in the positive gate bias range. The state densities at the Al{sub 2}O{sub 3}/AlGaN interface were estimated to be 1 × 10{sup 12} cm{sup −2} eV{sup −1} or less around the midgap and 8 × 10{sup 12} cm{sup −2} eV{sup −1} near the conduction-band edge. In addition, we observed higher maximum drain current at the positive gate bias and suppressed threshold voltage instability under the negative gate bias stress even at 150 °C. Results presented in this paper indicated that the N{sub 2}O-radical treatment is effective both in reducing the interface states and improving the electrical properties of the Al{sub 2}O{sub 3}/AlGaN/GaN MOS-HEMTs.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗