Search NASA⌕ Search

SEARCH · Search NASA

Results for “Data article”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,657 records · Page 92

Safety envelope for load tolerance of structural element design based on multi-stage testing

Structural elements, such as stiffened panels and lap joints, are basic components of aircraft structures. For aircraft structural design, designers select predesigned elements satisfying the design load requirement based on their load-carrying capabilities. Therefore, estimation of safety envelope of structural elements for load tolerances would be a good investment for design purpose. In this article, a method of estimating safety envelope is presented using probabilistic classification, which can estimate a specific level of failure probability under both aleatory and epistemic uncertainties. An important contribution of this article is that the calculation uncertainty is reflected in building a safety envelope using Gaussian process, and the effect of element test data on reducing the calculation uncertainty is incorporated by updating the Gaussian process model with the element test data. It is shown that even one element test can significantly reduce the calculation uncertainty due to lacking knowledge of actual physics, so that conservativeness in a safety envelope is significantly reduced. The proposed approach was demonstrated with a cantilever beam example, which represents a structural element. The example shows that calculation uncertainty provides about 93% conservativeness against the uncertainty due to a few element tests. As a result, it is shown that even a single element test can increase the load tolerance modeled with the safety envelope by 20%.

42 ENGINEERING↗

S&TR July-August: Beyond Ignition

On December 5, 2022, Lawrence Livermore’s National Ignition Facility achieved the first-ever successful positive-gain ignition shot. This scientific advance, heralded worldwide, required a multidecadal effort to synthesize physics theory, laser technologies, computation and diagnostic capabilities, as well as engineering, materials development, and other inputs. The question, “Can ignition be achieved?” had been answered. Since then, the Laboratory has answered the question, “Can we do it again?” with additional ignition shots at increasing yield. Now Lawrence Livermore researchers ask, “Can we improve ignition outcomes?” for the benefit of the Stockpile Stewardship Program. Interrelated articles presenting the Laboratory’s ignition science, the role of supercomputing in achieving ignition, the evolution of diagnostic instruments to measure ignition data, and the ambitious steps required to realize a fusion energy future lead to one answer: “Yes, we can.”

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Full-scale Transport Controlled Impact Demonstration Program

The Federal Aviation Administration (FAA) and NASA conducted a full-scale air-to-surface impact-survivable impact demonstration with a remotely piloted transport aircraft on 1 December 1984, at Edwards Air Force Base, California. The test article consisted of experiments, special equipment, and supporting systems, such as antimisting kerosene (AMK), crashworthiness structural/restraint, analytical modeling, cabin fire safety, flight data recorders, post-impact investigation, instrumentation/data acquisition systems, remotely piloted vehicle/flight control systems, range and flight safety provisions, etc. This report describes the aircraft, experiments, systems, activities, and events which lead up to the Controlled Impact Demonstration (CID). An overview of the final unmanned remote control flight and sequence of impact events are delineated. Preliminary post CID observations are presented.

Source record↗

Transient Pressure Test Article test program

The Transient Pressure Test Article test program being conducted at NASA-Marshall is described. The main goal of the TPTA test program is to provide data to verify the sealing capability of the redesigned SRM field joints, the nozzle-to-case joint, and the igniter joint. The TPTA test program can be used to demonstrate the assembly/disassembly and reusability of the redesigned joints along with the adequacy of assembly/disassembly tooling, procedures, and inspections.

Vibbart, Charles M.↗

Thermal control for the ground simulation of a space IR sensor system

Active and passive thermal controls for simulations of a space IR sensor system operating in cryogenic temperatures were designed, built, and tested from a component level to a system level. The test results from component tests and integrated system tests have compared very well with theoretical predictions, and thus verify component and integrated thermal math models. These verified models can be modified for use to predict flight systems thermal performance. Thermal vacuum simulations and demonstrations of a space IR system consisted of a target and background scene generator, telescope mirrors supported by a graphite-epoxy metering structure, and an IR sensor. These components are required to operate at cryogenic temperature levels. Each component has its unique thermal control needs. Descriptions are presented of thermal control systems for the test article from component design level to integrated system level along with discussions of component and integrated demonstration tests, and correlation of test data with thermal finite difference models.

Lee, E.↗

Passive microwave algorithm development and evaluation

The scientific objectives of this grant are: (1) thoroughly evaluate, both theoretically and empirically, all available Special Sensor Microwave Imager (SSM/I) retrieval algorithms for column water vapor, column liquid water, and surface wind speed; (2) where both appropriate and feasible, develop, validate, and document satellite passive microwave retrieval algorithms that offer significantly improved performance compared with currently available algorithms; and (3) refine and validate a novel physical inversion scheme for retrieving rain rate over the ocean. This report summarizes work accomplished or in progress during the first year of a three year grant. The emphasis during the first year has been on the validation and refinement of the rain rate algorithm published by Petty and on the analysis of independent data sets that can be used to help evaluate the performance of rain rate algorithms over remote areas of the ocean. Two articles in the area of global oceanic precipitation are attached.

Petty, Grant W.↗

Development and Operations of the Astrophysics Data System

The Astrophysics Data System (ADS) was represented at the AAS meeting in San Diego with an oral talk and a demonstration. The demonstration was hugely successful, especially in light of the fact that the meeting was attended by about 1,200 Physics teachers. This was a group that we had no contact with before. They were very interested in the ADS. Having made contact with this group should help to further propagate knowledge about the ADS in the Physics community and bring it to the attention of young scientists. Two new mirror sites were established, one in India and in Russia. The site in India is fully operational, the site in Russia is waiting for the data tapes to be loaded. The preprint database is already functional. The mirror site in India is expected to become a full article mirror site soon. The mirror site in Russia is expected to become a partial article mirror site in the near future. The mirror site in China now has a full article mirror. This is the second full article mirror site after the one in Japan. The mirror site at the CDS in France is working on configuring disks for another full article mirror.

Murray, Stephen S.↗

Development and Operations of the Astrophysics Data System

The ADS was represented at the AAS meeting in San Diego with an oral talk and a demonstration. The demonstration was hugely successful, especially in light of the fact that the meeting was attended by about 1,200 Physics teachers. This was a group that we had no contact with before. They were very interested in the ADS. Having made contact with this group should help to further propagate knowledge about the ADS in the Physics community and bring it to the attention of young scientists. Two new mirror sites were established, one in India and in Russia. The site in India is fully operational, the site in Russia is waiting for the data tapes to be loaded. The preprint database is already functional. The mirror site in India is expected to become a full article mirror site soon. The mirror site in Russia is expected to become a partial article mirror site in the near future. The mirror site in China now has a full article mirror. This is the second full article mirror site after the one in Japan. The mirror site at the CDS in France is working on configuring disks for another full article mirror.

Murray, Stephen S.↗

Synthetic Jets

Current investigation of synthetic jets and synthetic jets in cross-flow examined the effects of orifice geometry and dimensions, momentum-flux ratio, cluster of orifices, pitch and yaw angles as well as streamwise development of the flow field. This comprehensive study provided much needed experimental information related to the various control strategies. The results of the current investigation on isolated and clustered synthetic jets with and without cross-flow will be further analyzed and documented in detail. Presentations at national conferences and publication of peer- reviewed journal articles are also expected. Projected publications will present both the mean and turbulent properties of the flow field, comparisons made with the data available in an open literature, as well as recommendations for the future work.

Milanovic, Ivana M.↗

Bayesian Research at the NASA Ames Research Center,Computational Sciences Division

NASA Ames Research Center is one of NASA s oldest centers, having started out as part of the National Advisory Committee on Aeronautics, (NACA). The site, about 40 miles south of San Francisco, still houses many wind tunnels and other aviation related departments. In recent years, with the growing realization that space exploration is heavily dependent on computing and data analysis, its focus has turned more towards Information Technology. The Computational Sciences Division has expanded rapidly as a result. In this article, I will give a brief overview of some of the past and present projects with a Bayesian content. Much more than is described here goes on with the Division. The web pages at http://ic.arc. nasa.gov give more information on these, and the other Division projects.

Morris, Robin D.↗

Software Estimates Costs of Testing Rocket Engines

Simulation-Based Cost Model (SiCM), a discrete event simulation developed in Extend , simulates pertinent aspects of the testing of rocket propulsion test articles for the purpose of estimating the costs of such testing during time intervals specified by its users. A user enters input data for control of simulations; information on the nature of, and activity in, a given testing project; and information on resources. Simulation objects are created on the basis of this input. Costs of the engineering-design, construction, and testing phases of a given project are estimated from numbers and labor rates of engineers and technicians employed in each phase, the duration of each phase; costs of materials used in each phase; and, for the testing phase, the rate of maintenance of the testing facility. The three main outputs of SiCM are (1) a curve, updated at each iteration of the simulation, that shows overall expenditures vs. time during the interval specified by the user; (2) a histogram of the total costs from all iterations of the simulation; and (3) table displaying means and variances of cumulative costs for each phase from all iterations. Other outputs include spending curves for each phase.

Smith, C. L.↗

Hypersonic Inflatable Aerodynamic Decelerator (HIAD) Torus Mechanical Testing

The Armstrong Flight Research Center has performed loads testing of a series of developmental atmospheric entry decelerator structural components. Test setup hardware were designed and fabricated. In addition, test plan and checklist were developed for the consistent and efficient execution of the tests. Eight test articles were successfully tested in over one hundred test runs as test objectives were met. Test article buckling shapes and buckling loads were observed. Displacements and strains were also recorded as various load cases were applied. The test data was sent to Langley Research Center to help with the construction of the finite element model of the decelerator assembly.

buckling↗

Artificial Intelligence (AI) Methods for Augmenting the IMPACT Tool Evidence Library

Development of the Evidence Library for use with the IMPACT probability risk assessment tool took several years and involved a staggering amount of effort from a multi-disciplinary team. A very significant amount of the labor effort to collect, assess and finalize the Clinical Finding Form (CliFF) for each of the 119 medical conditions was provided by physician subject matter experts from the Exploration Medical Capability (ExMC) Element Clinical and Science Team. Many AI tools such as ChatGPT are excellent at summarizing large amounts of information and the current project was initiated to determine how such tools might streamline laborious processes, e.g., review and summarization of many scientific research publications, to execute key steps more efficiently in the process of developing CliFFs. The process for collecting the evidence which is found in the CliFFs is well documented in the Evidence Library Methods document (ELM; HRP-48036*). Using ELM and the CliFF development instructions as a guideline, a team of developers is leveraging Microsoft Azure AI tools and services along with open-source frameworks, to construct an AI-assisted automated pipeline. This pipeline is designed to search, retrieve, and process the necessary data sources, and ultimately help generate the final version of a CliFF. Currently, the large language model evaluates the relevance of each source material to spaceflights, either as direct evidence or as an analog. Additionally, the model assists in extracting keywords and generating brief summaries to enhance augmented retrieval and search processes in later stages of CliFF development. Once the data is ready, the model can perform semantic search and retrieval, generating and extracting valuable information for the CliFF. For instance, it can handle epidemiological statistical data, such as incidence rates and the likelihood of best or worst-case scenarios. The steps that required reading and summarizing articles were viewed as providing the greatest return on investment since large language models are very efficient and accurate in summarizing large amounts of text. Since labor effort to complete the original CliFF was not recorded with sufficient granularity, comparisons with an AI tool-generated CliFF will provide merely an approximation of time saved. Upon completion of the process, the CliFF for the medical condition “appendicitis” generated with the support of AI-based methods will serve as a proof-of-concept and will be compared to the original appendicitis CliFF to determine if use of the tools resulted in content and conclusory similarity. Based upon the results from face validation of the two CliFFs, modifications to the process will be made if necessary and additional condition CliFFs will be evaluated. Ultimately, CliFFs for the entire set of medical conditions will be created with the assistance of AI tools. Depending on the cost savings realized, CliFFs for additional medical conditions can be created to expand the Evidence Library. Future direction includes specifying the characteristics of the reviewer (prompting the AI tools to generate output assuming the reviewer is a sub-specialist physician, or nurse or EMT/medic) to determine if the effects on AI-generated output are different based on knowledge, skills and abilities. *Exploration Medical Capability Evidence Library Methods, HRP-48036 Rev A, July 2022.

Ali Al↗

Heavy Flavor Spectroscopy at the Tevatron

The Tevatron experiments have each accumulated about 6 fb{sup -1} of good data since the start of Run II. This large dataset provides excellent opportunities for heavy flavor spectroscopy studies at the Tevatron. This article will cover the latest {Upsilon}(nS) polarization studies as well as exotic meson spectroscopy results.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

An Analysis of the Published Mineral Resource Estimates of the Haji-Gak Iron Deposit, Afghanistan

The Haji-Gak iron deposit of eastern Bamyan Province, eastern Afghanistan, was studied extensively and resource calculations were made in the 1960s by Afghan and Russian geologists. Recalculation of the resource estimates verifies the original estimates for categories A (in-place resources known in detail), B (in-place resources known in moderate detail), and C{sub 1} (in-place resources estimated on sparse data), totaling 110.8 Mt, or about 6% of the resources as being supportable for the methods used in the 1960s. C{sub 2} (based on a loose exploration grid with little data) resources are based on one ore grade from one drill hole, and P{sub 2} (prognosis) resources are based on field observations, field measurements, and an ore grade derived from averaging grades from three better sampled ore bodies. C{sub 2} and P{sub 2} resources are 1,659.1 Mt or about 94% of the total resources in the deposit. The vast P{sub 2} resources have not been drilled or sampled to confirm their extent or quality. The purpose of this article is to independently evaluate the resources of the Haji-Gak iron deposit by using the available geologic and mineral resource information including geologic maps and cross sections, sampling data, and the analog-estimating techniques of the 1960s to determine the size and tenor of the deposit.

58 GEOSCIENCES↗

Characterizing GEO Titan Transtage Fragmentations using Ground-based Measurements

In a continued effort to better characterize the Geosynchronous Orbit (GEO) environment, NASA's Orbital Debris Program Office (ODPO) utilizes various ground-based optical assets to acquire photometric and spectral data of known debris associated with fragmentations in or near GEO. The Titan IIIC Transtage upper stage is known to have fragmented four times. Two of the four fragmentations were in GEO while a third Transtage fragmented in GEO transfer orbit. The forth fragmentation occurred in Low Earth Orbit. In order to better assess what may be causing these fragmentations, the NASA ODPO recently acquired a Titan Transtage test and display article that was previously in the custody of the 309th Aerospace Maintenance and Regeneration Group (AMARG) in Tucson, Arizona. After initial inspections at AMARG demonstrated that the test article was of sufficient fidelity to be of interest, the test article was brought to JSC to continue material analysis and historical documentation of the Titan Transtage. The Transtage will be a subject of forensic analysis using spectral measurements to compare with telescopic data; as well, a scale model will be created to use in the Optical Measurement Center for photometric analysis of an intact Transtage, including a BRDF. The following presentation will provide a review of the Titan Transtage, the current analysis that has been done to date, and the future work to be completed in support of characterizing the GEO and near GEO orbital debris environment.

Cowardin, H.↗

Decision Processes in Discrimination: Fundamental Misrepresentations of Signal Detection Theory

In the first part of this article, I describe a new approach to studying decision making in discrimination tasks that does not depend on the technical assumptions of signal detection theory (e.g., normality of the encoding distributions). Applying these new distribution-free tests to data from three experiments, I show that base rate and payoff manipulations had substantial effects on the participants' encoding distributions but no effect on their decision rules, which were uniformly unbiased in equal and unequal base rate conditions and in symmetric and asymmetric payoff conditions. In the second part of the article, I show that this seemingly paradoxical result is readily explained by the sequential sampling models of discrimination. I then propose a new, "model-free" test for response bias that seems to more properly identify both the nature and direction of the biases induced by the classical bias manipulations.

Balakrishnan, J. D.↗

Review article: therapeutic bile acids and the risks for hepatotoxicity

Summary Background Bile acids play important roles in cholesterol metabolism and signal through farnesoid X receptor and G protein‐coupled receptors. Given their importance in liver biology, bile acid therapy enables therapeutic applications beyond the treatment of cholestatic liver disease. However, predicting hepatotoxicity of bile acids in humans is obscured due to inconsistent extrapolations of animal data to humans. Aim To review the evidence that could explain discordant bile acids hepatotoxicity observed in humans and animals. Method Literature search was conducted in PubMed using keywords “bile acid,” “transporter,” “hepatotoxicity,” “clinical study,” “animal study,” “species difference,” “mechanism,” “genetic disorder.” Relevant articles were selected for review. Results Clinically significant hepatotoxicity was reported in response to certain bile acids, namely chenodeoxycholic acid, which was given a boxed warning for potential hepatotoxicity. The chemical structure, specifically the number and orientation of hydroxyl groups, significantly affects their hydrophobicity, an important factor in bile acid toxicity. Experimental studies show that hydrophobic bile acids can lead to liver injury through various mechanisms, such as death receptor signalling, mitochondrial dysfunction and inflammation. Although animal studies play a central role in investigating bile acid safety, there are considerable differences in bile acid composition, metabolism and hepatobiliary disposition across species. This does not allow appropriate safety inference, especially for predicting hepatotoxicity in humans. Exploring evidences stemming from inborn errors, genetic models of disease and toxicology studies further improves an understanding of bile acid hepatotoxicity. Conclusion Species differences should be considered in the development of bile acid related therapeutics. Although the mechanism of bile acid hepatotoxicity is still not fully understood, continued mechanistic studies will deepen our understanding.

Ashby, K.↗