Search NASA⌕ Search

SEARCH · Search NASA

Results for “Distributed optimization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,657 records · Page 92

Experimental studies on the effects of sheet resistance and wettability of catalyst layer on electro-catalytic activities for oxygen evolution reaction in proton exchange membrane electrolysis cells

As the most important part of electrochemical reaction in proton exchange membrane electrolysis cells (PEMECs) for water splitting, oxygen evolution reaction (OER) occurs at the anode catalyst layer (CL). The distribution of the OER site is affected by many factors, such as properties of CL, operation parameters, procedures, etc. To study the effects of properties of CLs on the distribution of OER site on the CL, and consequently affect the performance of PEMECs, CLs with different sheet resistances are tested under different operation conditions. Furthermore, the phenomena of OER on CLs are captured by a high-speed and micro-scale visualization system in-situ and analysed coupled with electrochemical results. The results in this work show that both sheet resistance and wettability of CLs have significant impact on the distribution of the OER site, which can help optimize the design of membrane electrode assembly and improve the operating parameters for electrochemical devices.

08 HYDROGEN↗

Size effect on electronic transport in nC–Si/SiO{sub x} core/shell quantum dots

Highlights: ► Electrical conductivity (σ) demonstrated to exhibit quantum size effect for Si-QDs. ► High σ ∼ 4 × 10{sup −2} S cm{sup −1} for Si-QDs of average size ∼3.7 nm, number density ∼4.8 × 10{sup 11} cm{sup −2}. ► Heterojunction-like band-structure at the QD interface controls electronic transport. -- Abstract: Electronic transport in silicon quantum dots (Si-QDs) in core/shell configuration was studied. The nC–Si cores encapsulated by protective SiO{sub x} shells embedded in a-Si matrix were obtained from one-step and spontaneous plasma processing, at low substrate temperature (300 °C) compatible for device fabrication. The size, density and distribution of nC–Si QDs were controlled by optimizing the plasma parameters. Very high electrical conductivity, σ ∼ 4 × 10{sup −2} S cm{sup −1}, was achieved at a total number density of Si-QDs, N ∼ 4.8 × 10{sup 11} cm{sup −2}, corresponding to the lowering in its average core size, d ∼ 3.7 nm, to the order of the bulk Si exciton Bohr radius and the associated quantum confinement effects. The electrical conductivity was demonstrated to exhibit quantum size (3 < d (nm) < 10) effect in zero dimensional quantum dots. The underlying electronic transport was explained using heteroquantum-dot model, the nC–SiO{sub x}:H QDs possess hetero-junction like band structure in the interface regions, due to their different band gaps.

36 MATERIALS SCIENCE↗

Implicit neural representations for experimental steering of advanced experiments

Scattering measurements using electrons, neutrons, or photons are essential for obtaining microscopic insights into materials. However, limited facility availability and high-dimensional scattering data necessitate more efficient experimental steering techniques. Here, we report a machine learning method that guides scattering data collection and facilitates real-time estimation of model parameters, given a reliable forward model to simulate experimental signals. We employ implicit neural representations as efficient surrogates that link model parameters with simulated spectroscopies. This enables a Bayesian optimal experimental design framework to estimate the probability distributions of parameters from high-dimensional scattering data. We demonstrate the proposed method using inelastic neutron scattering with simulated and real experimental data, highlighting the method’s ability to provide real-time parameter estimation with quantified uncertainties and to deliver informed experimental guidance that reduces experimental time while maximizing scientific output. This approach paves the way for accelerated discoveries in condensed matter through scattering measurements.

36 MATERIALS SCIENCE↗

Water Quality Effects of Economically Viable Land Use Change in the Mississippi River Basin under the Renewable Fuel Standard

Demand for biofuel production driven by the Renewable Fuel Standard (RFS2) has coincided with increased land in corn production and increasing nitrogen (N) loss to the Gulf of Mexico. Diversifying cropland with perennial energy crops (miscanthus and switchgrass) may reduce N loss and improve water quality. However, the extent of these benefits depends on the mix of biomass feedstocks (corn stover, perennials) incentivized by the RFS2 and the extent to which energy crops displace N-intensive row crops. We developed an integrated economic-biophysical model to quantify the water quality impacts of three potential policy scenarios that provided corn ethanol at levels before the RFS2 (RFS1 baseline); 15 billion gallons of corn ethanol (corn ethanol only); or 16 billion gallons of cellulosic ethanol in addition to corn ethanol (corn + cellulosic ethanol). Our results showed that economically optimal locations for perennial energy crop production were distributed across idle cropland with lower intrinsic N loss than active cropland. We found stover removal incentivized by the RFS2 offset N loss benefits of perennial energy crops. Furthermore, this finding suggests that targeted incentives for N loss reduction are needed to supplement the RFS2 to induce displacement of N-intensive row crops with energy crops to reduce N losses.

54 ENVIRONMENTAL SCIENCES↗

Discovering and Demonstrating a Novel High-Performing 2D-Patterned Electrode for Proton-Exchange Membrane Water Electrolysis Devices

Proton-exchange membrane water electrolysis (PEMWE) produces hydrogen with high efficiency and purity but uses high-loading platinum-group metal (PGM) catalysts. Such concerns call for the development of novel electrode architectures to improve catalyst utilization and mass activity, thus promoting PEMWE cost competitiveness for large-scale implementation. In this study, we demonstrated, for the first time, a novel two-dimensional (2D)-patterned electrode with edge effects to address these challenges. The edge effect was induced by membrane properties, potential distribution, and counter electrode coverage and could be optimized by tuning the catalyst layer dimensions. To achieve identical PEMWE performance, the optimal pattern saved the 21% anode PGM catalyst compared with the conventional catalyst fully covered electrode. The PGM catalyst could be further reduced by 61% to boost mass activity with no significant performance loss. The results also indicated that the electrode uniformity in PEMWE cells might not be as critical as that in PEM fuel cells. Finally, the novel 2D-patterned electrode could effectively reduce PGM catalyst loading, accelerating affordable and large-scale production of hydrogen and other value-added chemicals via electrolysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Surfactant Engineering and Its Role in Determining the Performance of Nanoparticulate Organic Photovoltaic Devices

The fabrication of organic photovoltaics (OPVs) from non-hazardous nanoparticulate (NP) inks offers considerable promise for the development of ecofriendly large-scale printed solar modules. However, the typical NP core-shell morphology (driven by the different donor/acceptor affinities for the surfactant used in NP synthesis) currently hinders the photovoltaic performance. As such, surfactant engineering offers an elegant approach to synthesizing a more optimal intermixed NP morphology and hence an improved photovoltaic performance. In this work, the morphology of conventional sodium dodecyl sulfate (SDS) and 2-(3-thienyl) ethyloxybutylsulfonate (TEBS)-stabilized poly(3-hexylthiophene) (P3HT) donor:phenyl-C 61 -butyric acid methyl ester (PC 61 BM) acceptor NPs is probed using scanning transmission X-ray microscopy, UV-vis spectroscopy, grazing-incidence X-ray diffraction, and scanning electron microscopy. While the SDS-stabilized NPs exhibit a size-independent core-shell morphology, this work reveals that TEBS-stabilized NPs deliver an intermixed morphology, the extent of which depends on the particle size. Consequently, by optimizing the TEBS-stabilized NP size and distribution, NP-OPV devices with a power conversion efficiency that is ~50% higher on average than that of the corresponding SDS-based NP-OPV devices are produced.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mapping the effects of physical and chemical reduction parameters on local atomic distributions within bimetallic nanoparticles

Bimetallic nanoparticles prove advantageous over their monometallic counterparts due to the tunable, hybrid properties that result from combining different atomic species in a controlled way. The favorable optical and catalytic properties resulting from AgAu nanoparticle formation have been widely attributed to the existence of Ag–Au bonds, the maximization of which assumes the formation of a homogeneous alloy. Despite the importance of atomic scale structure in these systems, synthetic studies are typically not paired with structural characterization at the atomic scale. Herein, a comprehensive synthetic exploration of physical and chemical reduction parameters of resulting nanoparticle products is complemented with thorough X-ray characterization to probe how these parameters affect atomic scale alloy distributions within AgAu nanoparticles. Presented evidence shows Ag is substantially underincorporated into nanoparticle constructs compared with solution Ag : Au ratios regardless of precursor :reductant ratio or volume of reductant added. Both Ag and Au exhibit significant local clustering, with Ag distributed preferentially towards the nanoparticle surface. Most significantly, the results of this investigation suggest that reduction parameters alone can affect the local alloy distributions and homogeneity within bimetallic nanoparticles, even when the ratio of metallic precursors remains constant. Overall, this investigation presents the ability to control alloy distributions using kinetics and provides new considerations for optimizing synthetic methods to produce functional bimetallic nanoparticles.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Optimal Dispatch for the US Virgin Islands to Increase Renewable Rates in Saint Croix

The US Virgin Islands, like many other small island nations, face significant challenges related to its energy supply. Their dependency on imported fossil fuels not only drives up energy costs, but also contributes to different environmental problems. Nevertheless, their generally sunny and windy climate makes this archipelago an ideal location for renewable energy development. Increasing the use of sources such as wind, and solar can help reduce their energy dependency, lower their levelized cost of electricity, and improve the health and wellbeing of local communities. In this paper, an optimal dispatcher is employed to analyze the implications on energy security of employing different technology options according to the plans of the local system operator. In this context, short term stability is ensured by inserting operational constraints in the energy management system based on stability analysis developed in PSCAD. The results highlight the usefulness of integrating PV and battery system, while further analysis are required to justify integrating wind power.

energy islands↗

Examining the Impact of Data Layout on Tape on Data Recall Performance for ATLAS

Increases in data volumes are forcing high-energy and nuclear physics experiments to store more frequently accessed data on tape. Extracting the maximum performance from tape drives is critical to make this viable from a data availability and system cost standpoint. The nature of data ingest and retrieval in an experimental physics environment make achieving high access performance difficult given the inherent limitations of magnetic tape. Tailoring the layout of data on tape is one key to improving read performance. This paper highlights the work in progress to characterize ATLAS data ingested in the tape system, understand how data layout, i.e. file co-location on tape and file distribution over tapes, affect read performance and how optimal data layout might be achieved in a production environment.

99 GENERAL AND MISCELLANEOUS↗

Development of Small Multiaperture Negative Ion Beam Sources and Related Simulation Tools

In the design of extraction systems for negative ion sources several fundamental questions still deserve further investigation, as the distribution of particles near the extraction sheath, the optimal magnetic structure and the space charge compensation length after acceleration. Large (and undesired) deflection differences may develop between beamlets of a multiaperture source, so that equalization of the magnetic field effect is necessary. To guarantee an uniform strength of filter field at extraction and in the acceleration, several configuration of arrays of permanent magnets were studied and fast simulation tools were developed. As an example of optimized magnetic configuration and as a possible experimental tool, the design of NIO1 (Negative Ion Optimization try 1) is here discussed. This project consists of a 3x3 matrix of 8 mm extraction holes, aimed at a total H{sup -} current about 130 mA with an extraction voltage V{sub s} = -60 kV. A modular design is used, so several parts (the extraction grid, the acceleration grid, the filter assembly, the source multipoles) can be rotated by 90 degrees for versatility. Space charge compensation was included into a two dimensional self consistent code for negative beams, here used for NIO1 simulation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Effect of total pressure on the formation and size evolution of silicon quantum dots in silicon nitride films

The size of silicon quantum dots (Si QDs) embedded in silicon nitride (SiN{sub x}) has been controlled by varying the total pressure in the plasma-enhanced chemical vapor deposition (PECVD) reactor. This is evidenced by transmission electron microscopy and results in a shift in the light emission peak of the quantum dots. We show that the luminescence in our structures is attributed to the quantum confinement effect. These findings give a strong indication that the quality (density and size distribution) of Si QDs can be improved by optimizing the deposition parameters which opens a route to the fabrication of an all-Si tandem solar cell.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Near-surface depletion of antimony during the growth of GaAsSb and GaAs/GaAsSb nanowires

The near-surface reduction of the Sb mole fraction during the growth of GaAsSb nanowires (NWs) and GaAs NWs with GaAsSb inserts has been studied using quantitative high-angle annular dark field scanning transmission electron microscopy (STEM). A model for diffusion of Sb in the hexagonal NWs was developed and employed in combination with the quantitative STEM analysis. GaAsSb NWs grown by Ga-assisted molecular beam epitaxy (MBE) and GaAs/GaAsSb NWs grown by Ga- and Au-assisted MBE were investigated. At the high temperatures employed in the NW growth, As-Sb exchange at and outward diffusion of Sb towards the surface take place, resulting in reduction of the Sb concentration at and near the surface in the GaAsSb NWs and the GaAsSb inserts. In GaAsSb NWs, an increasing near-surface depletion of Sb was observed towards the bottom of the NW due to longer exposure to the As beam flux. In GaAsSb inserts, an increasing change in the Sb concentration profile was observed with increasing post-insert axial GaAs growth time, resulting from a combined effect of radial GaAs overgrowth and diffusion of Sb. The effect of growth temperature on the diffusion of Sb in the GaAsSb inserts was identified. The consequences of these findings for growth optimization and the optoelectronic properties of GaAsSb are discussed.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Study of clathrate hydrates via equilibrium molecular-dynamics simulation employing polarisable and non-polarisable, rigid and flexible water models

Equilibrium molecular-dynamics (MD) simulations have been performed on metastable sI and sII polymorphs of empty hydrate lattices, in addition to liquid water and ice Ih. The non-polarisable TIP4P-2005, simple point charge model (SPC), and polarisable Thole-type models (TTM): TTM2, TTM3, and TTM4 water models were used in order to survey the differences between models and to see what differences can be expected when polarisability is incorporated. Rigid and flexible variants were used of each model to gauge the effects of flexibility. Power spectra are calculated and compared to density-of-states spectra inferred from inelastic neutron scattering (INS) measurements. Thermodynamic properties were also calculated, as well as molecular-dipole distributions. It was concluded that TTM models offer optimal fidelity vis-à-vis INS spectra, together with thermodynamic properties, with the flexible TTM2 model offering optimal placement of vibrational modes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Curl-free magnetic fields for stellarator optimization

This paper describes a new and efficient method of defining an annular region of a curl-free magnetic field with specific physics and coil properties that can be used in stellarator design. Three statements define the importance: (1) Codes can follow an optimized curl-free initial state to a final full-pressure equilibrium. The large size of the optimization space of stellarators, approximately 50 externally produced distributions of magnetic field, makes success in finding a global optimum largely determined by the starting point. (2) The design of a stellarator is actually improved when the central region of the plasma has rapid transport with the confinement provided by a surrounding annulus of magnetic surfaces with low transport. (3) The stellarator is unique among all fusion concepts, inertial as well as magnetic, in not using the plasma itself to provide an essential part of its confinement concept. This permits reliable computational design, which opens a path to faster, cheaper, and more certain achievement of fusion energy.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Optimal deformation procedure for hybrid adaptive x-ray mirror based on mechanical and piezo-driven bending system

Here, a hybrid deformable x-ray mirror consisting of a mechanical bender and a bimorph deformable mirror has been developed to realize adaptive optical systems, such as zoom condenser optics, for synchrotron-radiation-based x-ray microscopy. In the developed system, both bending mechanisms comprehensively contribute to the formation of the target mirror shape and can narrow the role of piezoelectric actuators, thereby enabling a more stable operation. In this study, the behavior of the bimorph mirror under the clamped condition was investigated, and the sharing of the deformation amount for each bending mechanism was optimized to minimize the amplitude of the voltage distribution of the bimorph mirror.

47 OTHER INSTRUMENTATION↗

BioNetFit: a fitting tool compatible with BioNetGen, NFsim and distributed computing environments

Rule-based models are analyzed with specialized simulators, such as those provided by the BioNetGen and NFsim open-source software packages. Here in this paper, we present BioNetFit, a general-purpose fitting tool that is compatible with BioNetGen and NFsim. BioNetFit is designed to take advantage of distributed computing resources. This feature facilitates fitting (i.e. optimization of parameter values for consistency with data) when simulations are computationally expensive.

59 BASIC BIOLOGICAL SCIENCES↗

Measurement of the D + -meson production cross section at low transverse momentum in p p ¯ collisions at s = 1.96 TeV

We report on a measurement of the D + -meson production cross section as a function of transverse momentum (p T ) in proton-antiproton (p$\bar{p}$) collisions at 1.96 TeV center-of-mass energy, using the full data set collected by the Collider Detector at Fermilab in Tevatron Run II and corresponding to 10 fb -1 of integrated luminosity. We use D + →K - π + π + decays fully reconstructed in the central rapidity region |y|<1 with transverse momentum down to 1.5 GeV/c, a range previously unexplored in p$\bar{p}$ collisions. Inelastic p$\bar{p}$ scattering events are selected online using minimally biasing requirements followed by an optimized offline selection. The K - π + π + mass distribution is used to identify the D + signal, and the D + transverse impact-parameter distribution is used to separate prompt production, occurring directly in the hard-scattering process, from secondary production from b-hadron decays. We obtain a prompt D + signal of 2950 candidates corresponding to a total cross section σ(D + ,1.5 T <14.5 GeV/c,|y|<1)=71.9±6.8(stat)±9.3(syst) μb. While the measured cross sections are consistent with theoretical estimates in each p T bin, the shape of the observed p T spectrum is softer than the expectation from quantum chromodynamics. The results are unique in p$\bar{p}$ collisions and can improve the shape and uncertainties of future predictions.

(K-↗

Velocity-space compression from Fermi acceleration with Lorentz scattering

The Fermi acceleration model describes how cosmic ray particles accelerate to great speeds by interacting with moving magnetic fields. In this work, we identify a variation of the model where light ions interact with a moving wall while undergoing pitch angle scattering through Coulomb collisions due to the presence of a heavier ionic species. The collisions introduce a stochastic component which adds complexity to the particle acceleration profile and sets it apart from collisionless Fermi acceleration models. The unusual effect captured by this simplified variation of Fermi acceleration is the nonconservation of phase space, with the possibility for a distribution of particles initially monotonically decreasing in energy to exhibit an energy peak upon compression. A peaked energy distribution might have interesting applications, such as to optimize fusion reactivity or to characterize astrophysical phenomena that exhibit nonthermal features.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗