Search NASA⌕ Search

SEARCH · Search NASA

Results for “MITIGATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,657 records · Page 92

Gas powered fluid gun with recoil mitigation

A gas powered fluid gun for propelling a stream or slug of a fluid at high velocity toward a target. Recoil mitigation is provided by a cavitating venturi that reduces or eliminates the associated recoil forces, with minimal or no backwash. By launching a quantity of water in the opposite direction, net momentum forces are reduced or eliminated.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

Mitigating Structural Defects in Droop-Minimizing InGaN/GaN Quantum Well Heterostructures

Modern commercial InGaN/GaN blue LEDs continue to suffer from efficiency droop, a reduction in efficiency with increasing drive current. External quantum efficiency (EQE) typically peaks at low drive currents (< 10 A cm 2 ) and drops monotonically at higher current densities, falling to <85% of the peak EQE at a drive current of 100 A cm 2 . Mitigating droop-related losses will yield tremendous gains in both luminous efficacy (lumens/W) and cost (lumens/$). Such improvements are critical for continued large-scale market penetration of LED technologies, particularly in high-power and high flux per unit area applications. However, device structures that reduce droop typically require higher indium content and are accompanied by a corresponding degradation in material quality which negates the droop improvement via enhanced Shockley-Read-Hall (SRH) recombination. In this work, we use advanced characterization techniques to identify and classify structural defects in InGaN/GaN quantum well (QW) heterostructures that share features with low-droop designs. Using aberration-corrected scanning transmission electron microscopy (C s -STEM), we find the presence of severe well width fluctuations (WWFs) in a number of low droop device architectures. However, the presence of WWFs does not correlate strongly with external quantum efficiency nor defect densities measured via deep level optical spectroscopy (DLOS). Hence, performance losses in the heterostructures of interest are likely dominated by nanoscale point or interfacial defects rather than large-scale extended defects.

36 MATERIALS SCIENCE↗

Impacts of Carrier Transport and Deep Level Defects on Delayed Cathodoluminescence in Droop-Mitigating InGaN/GaN LEDs

Prevalent droop mitigation strategies in InGaN-based LEDs require structural and/or compositional changes in the active region but are accompanied by a detrimental reduction in external quantum efficiency (EQE) due to increased Shockley-Read-Hall recombination. Understanding the optoelectronic impacts of structural modifications in InGaN/GaN quantum wells (QW) remains critical for emerging high-power LEDs. In this work, we use a combination of electron microscopy tools along with standard electrical characterization to investigate a wide range of low-droop InGaN/GaN QW designs. We find that chip-scale EQE is uncorrelated with extended well-width fluctuations observed in scanning transmission electron microscopy. Further, we observe delayed cathodoluminescence (CL) response from designs in which calculated band profiles suggest facile carrier escape from individual QWs. Samples with the slowest CL responses also exhibit the lowest EQEs and highest QW defect densities in deep level optical spectroscopy. We propose a model in which the electron beam (i) passivates deep level defect states and (ii) drives charge carrier accumulation and subsequent reduction of the built-in field across the multi-QW active region, resulting in delayed radiative recombination. Finally, we correlate CL rise dynamics with capacitance-voltage measurements and show that certain early-time components of the CL dynamics reflect the open circuit carrier population within one or more QWs.

Zhao, Zhibo↗

Multifunctional composite coatings for metal whisker mitigation

The present invention relates to composite coatings including particles embedded in a matrix, as well as methods and uses thereof. In some examples, the particles are aligned to enhance mitigation of whisker formation from an underlying metal material. Such coatings can be applied to electrical components, thereby reducing the possibility of electrical short circuits from aberrant whisker growth.

Rohwer, Lauren E. S.↗

Portable COTS RGB Wavefront System for Real-time Turbulence Mitigation

Atmospheric effects reduce the ability to detect or identify objects of interest due to spatial and spectral scintillation. Algorithms alone cannot correct for turbulence over long-range horizontal paths. While adaptive optics methods work well for astronomical viewing, they are not readily adapted for complex imagery over long-range horizontal paths. At MSS Parallel in 2016, we presented our work for the red/green/blue (RGB) wavefront sensor. Since then, we have completed our system to combine an off-the-shelf high-frame-rate USB3 color camera with a compact 90 mm Maksutov-Cassegrain telescope and an OKO deformable mirror (DM) to create a portable, real-time RGB wavefront sensor and turbulence mitigation system. The telescope’s aperture is covered with an aluminum plate holding three separate narrowband color filters. These filters, specifically matched to the relative spectral response of the sensor’s Bayer mask, provide nearly complete separation of the three color images. This device enables portable imaging through atmospheric turbulence and analysis thereof, where relative motion of the three-color Bayer-pixel video provides real-time wavefront information on the second-order statistics of Kolmogorov turbulence. We measured relative RGB pixel shifts and controlled this mirror using an ODROID single-board computer. We developed a bench setup to calibrate the relationship between pixel shifts and the deformable mirror actuators. We demonstrated the feasibility of this system on a benchtop and on scenes at 700 meters showing real time correction.

47 OTHER INSTRUMENTATION↗

Method for radionuclide contaminatecontaminant mitigation

The method and system disclosed provides radionuclide contamination mitigation by applying an aqueous carrier solution comprising a cation to a surface bearing a radionuclide contaminant to cause the radionuclide contaminant to enter solution forming a laden solution, then contacting the laden solution with a sequestering agent to bind to the radionuclide contaminant to form a laden sequestering agent. The removal and sequestration of the radionuclide contaminant from the contaminated surface leads directly to a reduction in the amount of radiologically-impacted critical infrastructure and the environment. The method and system are able to be performed or utilized economically with materials quickly available in the event of a radiological dispersion event.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Spectral notch interference mitigation for stretch processing synthetic aperture radar

Various technologies for mitigating interference in stretch-processed SAR imagery are described herein. Stretch-processed SAR data is received at a computing device. The stretch-processed (or deramped) SAR data is then reramped, thereby removing frequency-variant components of narrowband interference signals in the deramped data. A frequency-domain transform is executed over the reramped data to generate a spectral characteristic of the reramped data. A spectral notch filter is applied to frequency bands corresponding to the peaks of the spectral characteristic in order to filter out the narrowband interference signals. An inverse frequency-domain transform can then be executed over the filtered spectral characteristic to return to a phase-history representation of the SAR data. The phase history resulting from the inverse frequency-domain transform is a ramped phase history, which can then be deramped prior to use in connection with generating images of the scanned scene.

Musgrove, Cameron↗

A progressive deep transfer learning approach to cycle-skipping mitigation in FWI, In SEG Technical Program Expanded Abstracts 2019, pp. 2348-2352. Society of Exploration Geophysicists, 2019.

To effectively mitigate the cycle-skipping phenomenon in full waveform inversion (FWI), we developed an inception-based deep learning neural network to reconstruct the absent low frequency data by exploiting the subsurface low wavenumber information buried in the acquired high frequency data. Two unique features of our deep learning network for the low frequency data reconstruction are 1) Dual Data Feed; 2) Progressive Transfer Learning. With the Dual Data Feed feature, not only the high frequency data, but also the corresponding Beat Tone data are fed into the neural network, significantly reducing the network complexity and the network training cost. The Progressive Transfer Learning technique enables us to initiate the deep learning network with only one training dataset. Unlike other deep learning approaches in this category, our training dataset is not fixed. Instead, the training dataset and the network accuracy are progressively enhanced in an iterative manner within the Progressive Transfer Learning workflow. The numerical experiments validated that the low frequency data reconstructed by this progressive transfer learning network are sufficiently accurate for a successful FWI inversion without suffering from the cycle-skipping without any priori geological information.

58 GEOSCIENCES↗

Power-Domain Impedance Theory for the Analysis and Mitigation of Interarea Oscillations: Preprint

This paper presents an impedance-based theory for the analysis and mitigation of interarea oscillations in power systems. Because low-frequency power system oscillations primarily manifest in phasor quantities, including active and reactive power flows, and the magnitude and frequency of bus voltages, a new-type of impedance, called power-domain impedance, is defined in terms of these phasor quantities. The power-domain impedance provides an intuitive framework for the analysis of interarea oscillations without requiring internal details of generators, and it is ideally suited for developing oscillation damping controls in inverter-based resources. The power-domain impedance theory is demonstrated in this paper using PSCAD simulations of a two-area system. The theory is also used for designing damping control in synchronous generators and a wind power plant in the two-area system.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Co-notch and independent windowing to mitigate interference in SAR-based imagery

Various technologies for mitigating distortion in coherent image products generated from SAR data are described herein. Synthetic aperture radar (SAR) datasets generated based upon SAR returns from first and second passes of a SAR platform over a scene are received. The SAR datasets can be co-notched at matching sample indices to improve coherence of SAR images generated from the datasets. Windowed SAR data is generated by applying independent windows to subsets of each of the datasets to reduce sidelobe levels of their image impulse responses. Coherent image products are generated based upon the windowed SAR data, wherein an image quality of the coherent image products is improved as compared to coherent image products generated based upon the SAR datasets.

47 OTHER INSTRUMENTATION↗

Hydrophobicity of Rare-earth Oxide Ceramics and their Application in Promoting Sustained Dropwise Condensation and Corrosion and Fouling Mitigation in Hydropower Systems

Hydrophobic surfaces that are robust can have widespread applications in various industries including energy, hydropower, and transportation. In particular, hydrophobic materials promote dropwise condensation, which results in heat transfer coefficients that can be an order of magnitude higher than those seen in conventional filmwise condensation. Existing durable materials such as metals and ceramics are generally hydrophilic and require polymeric modifiers to render them hydrophobic, but these modifiers deteriorate in harsh environments. Therefore, robust hydrophobic surfaces have been difficult to realize and their widespread applicability has been limited. In this project, the class of ceramics comprising the lanthanide series rare-earth oxides (REOs) is studied for their hydrophobic potential. The unique electronic structure of the rare-earth metal atom inhibits hydrogen bonding with interfacial water molecules resulting in a hydrophobic hydration structure where the surface oxygen atoms are the only hydrogen bonding sites. Despite being inherently hydrophobic, the presence of excess surface oxygen on REOs can lead to increased hydrogen bonding and thereby reduce their hydrophobicity. Using X-ray Photoelectron Spectroscopy (XPS) and wetting measurements, surface stoichiometry and surface relaxations have been shown to impact wetting properties of REOs. Specifically, freshly sputtered ceria is shown to be hydrophilic due to excess surface oxygen (shown to have an O/Ce ratio of ~3), which when relaxed in a clean, ultra-high vacuum environment isolated from airborne contaminants reaches close to stoichiometric O/Ce ratio (~2.2) and becomes hydrophobic. Further, airborne hydrocarbon contaminants do not exclusively impact the wetting properties of REOs, and relaxed REOs are intrinsically hydrophobic. This project also demonstrates that thin-film coatings (~300 nm) of relaxed hydrophobic REOs show sustained dropwise condensation behavior for over 100 hours at accelerated saturated steam conditions without compromising structural integrity or hydrophobicity, and produce an almost tenfold enhancement in the heat transfer co-efficient (103 ± 5 kW/m2K) compared to conventional filmwise condensation (usually <10 kW/m2K). It is envisioned that robust hydrophobic rare-earth oxide ceramics will have far reaching technological applications, especially in dropwise condensation and fouling mitigation in hydropower systems.

13 HYDRO ENERGY↗

Liquid-Cooled Heat Sink Optimization for Thermal Imbalance Mitigation in Wide-Bandgap Power Modules

Power semiconductor die layout in substrates used in power modules is generally optimized for minimum electrical parasitics (e.g., stray inductance) by considering the minimum spacing between dies for thermal decoupling. The layout assumes sufficient heat spreading and transfer from dies to the cooling structure. For module designs using a direct substrate cooling method, the base plate is removed, leading to a steady-state thermal asymmetry in the power module due to insufficient heat spreading/transfer. This causes significant temperature differences among the devices. Such unintentional thermal asymmetries can lead to undesirable asymmetries in power conversion among semiconductor devices, which impact reliability. This article proposes a thermal imbalance mitigation method that uses evolutionary optimized liquid-cooled heat sinks to improve the thermal loading among devices.

Sahu, Raj↗

Wellbore Leakage Mitigation Using Advanced Mineral Precipitation Strategies (Final Scientific/Technical Report)

This research project, entitled Wellbore Leakage Mitigation using Advanced Mineral Precipitation Strategies, was directed toward advancing mineral precipitation technologies to seal wellbore leaks and other potential carbon dioxide (CO 2 ) leakage pathways, including compromised wellbore cement and fracture networks of varying geometries throughout the wellbore and surrounding formation. The advanced mineral sealing techniques were evaluated in the laboratory and the field to expand the range of temperature, pressure, and chemical conditions where mineral precipitation could be used. Rates of enzymatically or thermally induced calcium carbonate precipitation (EICP, TICP) were determined as well as rates of enzyme inactivation at elevated temperatures (>60 °C). Immobilization was shown to enhance the thermal stability of urease enzyme and provide protection from inhibition in low pH conditions. Mineral seals promoted by EICP and TICP were used to seal fractured composite (cement/sandstone) and shale cores in high pressure reactors operated at temperatures greater than 55 °C and 130 °C, respectively. A computational model was updated to model processes of EICP and TICP. The work resulted in a successful field test, which showed that EICP in the presence of low pH fluids (CO 2 -impacted brine) could promote permeability reduction and seal a channel in the near-wellbore environment.

54 ENVIRONMENTAL SCIENCES↗

Blast mitigation foam concentrates and foams made therefrom

The present disclosure is directed to highly concentrated foam formulations for blast suppression and dispersion mitigation. for use in responding to a terrorism incident involving a blast dispersion device. The foam formulation is more concentrated and more stable than current blast suppression foams, which reduces the logistics burden on the user.

Burton, Patrick D.↗

Supply voltage decoupling circuits for voltage droop mitigation

Circuits and methods are provided for utilizing decoupling capacitors to mitigate voltage droop on power supply lines of a power distribution network. A power supply line is capacitively decoupled using a first decoupling capacitor connected to the power supply line and charged to a first voltage level of the power supply line. A second decoupling capacitor is pre-charged to a second voltage level greater than the first voltage level and held in standby. A control circuit determines or predicts an occurrence of a droop event in which the first voltage decreases to a level which is at or below a droop threshold voltage level, and selectively connects the pre-charged second decoupling capacitor to the power supply line to source additional boosting current through discharging of the second decoupling capacitor and thereby capacitively decouple the power supply line using the higher second voltage and additional boosting current.

Zhang, Xin↗

Plasma Processing for In-Situ Field Emission Mitigation of Superconducting Radiofrequency (SRF) Cryomodules

Field emission (FE) is one of the main limiting factors of superconducting radio-frequency (SRF) cavities operating in accelerators and it occurs whenever contaminants, like dust, metal flakes or even absorbates, are present on the surface of the cavity high electric field region. Field emission reduces the maximum achievable accelerating field and generates free electrons that may interact with the beam, damage or activate the beamline. One practical method that can be used to mitigate this problem is in-situ plasma cleaning, or plasma processing. The development of a processing that can be applied in-situ is extremely advantageous, since it enables the recovery of the cryomodule performance without the need of disassembling the whole cryomodule, which is an extremely expensive and time-consuming process. On the other hand, plasma processing only requires the cryomodule warm-up to room-temperature and the subsequent processing of the contaminated cavities. The entire process is reasonably quick and involves a limited number of personnel. For these reasons we would like to advocate for continuing to invest in the R&D of plasma processing to optimize its applicability in cryomodules and for extending the technique to other frequency ranges and cavities geometries.

43 PARTICLE ACCELERATORS↗

U.S. Commercial Building Stock Analysis of COVID-19 Mitigation Strategies: Preprint

The COVID-19 pandemic highlights the importance of improving building indoor air quality to reduce occupants’ chances of contracting airborne illness. The ASHRAE Epidemic Task Force (ASHRAE-ETF) released several COVID-19 mitigation strategies at the onset of the pandemic. This study explores four of those recommendations for reducing transmission of COVID-19 inside buildings: (1) 100% outdoor air ventilation, (2) MERV-13 or better filters, (3) demand control ventilation removal, and (4) HVAC flushing mode. These recommendations were simulated and assessed using ComStock, a model of the U.S. commercial building stock. The study showed the 100% outdoor air ventilation recommendation had the largest impact on energy consumption, noncoincident peak demand, and thermostat violations. Removing demand control ventilation had the smallest national aggregate impact, installing MERV-13 filters led to slight increases in energy use and peak demand, and HVAC outdoor air flushing led to modest energy use and peak demand increases.

building energy modelling↗