Search NASA⌕ Search

SEARCH · Search NASA

Results for “MONOCRYSTALS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,657 records · Page 92

Observation of UV-induced Auger features in catechol adsorbed on anatase TiO{sub 2} (101) single crystal surface

We have investigated the electronic structure of catechol adsorbed on the anatase TiO{sub 2} (101) surface under illumination with ultraviolet (UV) light (4.75 eV) using resonant photoemission spectroscopy. UV illumination results in the appearance of a strong Ti MVV (M refers to photoionization of 3p level and VV the Auger decay process via the valence levels) feature at a kinetic energy of 26.2 eV. This is attributed to the creation of localised states following catechol to Ti-3d excitation by the UV source. A sharp resonance attributed to excitation from Ti 3p states into these localised states is observed in constant final state spectra.

36 MATERIALS SCIENCE↗

A study on crystalline perfection, optical, dielectric, mechanical, laser damage threshold and NLO properties of glycine added potassium dihydrogen phosphate single crystals

Single crystals of glycine doped potassium dihydrogen phosphate have been grown by slow evaporation solution technique, slow cooling along with seed rotation and Sankaranaryanan-Ramasamy method. The size of the grown crystal in slow cooling method was 35x25x20 mm{sup 3} and in SR method it was 20 mm in diameter and 110 mm in length. The grown crystals were characterized by HRXRD, UV-Visible, dielectric, Vickers microhardness, laser damage threshold and SHG studies. The crystalline perfection of the grown crystals has been analyzed by high resolution X-ray diffraction. The transmittance of the grown crystals is 66%, 70%, and 77% respectively and all the crystals have good transparency in the entire visible region. The crystal grown by SR method glycine added KDP has much higher hardness value than other method grown crystals. Higher laser damage threshold was observed in SR method grown glycine added KDP crystal compared to SR method grown pure KDP crystal. The second harmonic generation efficiency of the glycine doped KDP is increased compared to pure KDP.

36 MATERIALS SCIENCE↗

Strain and mosaic deformation in laser irradiated silicon

The effect of moderately intense ({approx}GWcm{sup -2} The effect of moderately intense ({approx}GWcm-2), 200 ps laser pulse irradiation on silicon single crystal is reported. The x-ray diffraction measurements performed on the irradiated samples reveal irreversible structural deformations. Raman spectroscopic measurements reveal substantial shift of the peak position as well as an overall broadening, pointing towards the presence of residual strain and formation of micromosaic structures on the laser induced shock recovered samples.

36 MATERIALS SCIENCE↗

Electrical transport properties study of Mo{sub 0.6}W{sub 0.4}Se{sub 2} single crystals

The mixed transition metal dichalcogenide single crystals Mo{sub 0.6}W{sub 0.4}Se{sub 2} were characterized employing EDAX (Energy Dispersive Analysis of X-ray), (XRD) X-ray diffraction, SEM (Scanning Electron Microscope) and UV-Vis-NIR spectroscopy techniques. The electrical transport properties of as-grown Mo{sub 0.6}W{sub 0.4}Se{sub 2} single crystals were studied by two probe d. c. resistivity, Hall Effect and thermoelectric power measurement set-up. The obtained results are discussed in details.

36 MATERIALS SCIENCE↗

Large pyramid shaped single crystals of BiFeO{sub 3} by solvothermal synthesis method

Synthesis parameters are optimized in order to grow single crystals of multiferroic BiFeO{sub 3}. 2 to 3 mm size pyramid (tetrahedron) shaped single crystals were successfully obtained by solvothermal method. Scanning electron microscopy with EDAX confirmed the phase formation. Raman scattering spectra of bulk BiFeO3 single crystals have been measured which match well with reported spectra.

36 MATERIALS SCIENCE↗

The effect of 100 MeV oxygen ion on electrical and optical properties of nonlinear optical l-alanine sodium nitrate single crystals

Single crystals of nonlinear optical (NLO) L-alanine Sodium Nitrate (LASN) were grown by slow evaporation method. The grown crystals were irradiated by 100 MeV oxygen ions with the cumulative doses of 1Mrad, 6 Mrad and 10 Mrad. The dielectric properties, differential scanning calorimetry (DSC) and second harmonic generation (SHG) of the crystals were studied before and after irradiation. The dielectric constant was found to increase after irradiation. The DSC reveals that the melting point remains unaffected due to irradiation. The SHG efficiency of LASN was found to decrease with increase in radiation dose.

36 MATERIALS SCIENCE↗

Optical phonon lifetimes in sputtered AlN thin films

We study the vibrational properties of AlN thin films deposited on silicon (100) substrates by the reactive DC-pulsed magnetron sputtering. The frequencies and lifetimes of the E{sub 1}(TO) and A{sub 1}(LO) optical phonons are calculated from Fourier transform infrared spectra using the factorized model of a damped oscillator. We analyze the structural properties by the x-ray diffraction technique to correlate the elongation of phonon lifetimes with increasing film thickness. The lifetimes of the phonon modes in AlN thin films are compared to the values in a single crystal.

36 MATERIALS SCIENCE↗

Data-driven imaging in anisotropic media

Anisotropic materials are being used increasingly in high performance industrial applications, particularly in the aeronautical and nuclear industries. Some important examples of these materials are composites, single-crystal and heavy-grained metals. Ultrasonic array imaging in these materials requires exact knowledge of the anisotropic material properties. Without this information, the images can be adversely affected, causing a reduction in defect detection and characterization performance. The imaging operation can be formulated in two consecutive and reciprocal focusing steps, i.e., focusing the sources and then focusing the receivers. Applying just one of these focusing steps yields an interesting intermediate domain. The resulting common focus point gather (CFP-gather) can be interpreted to determine the propagation operator. After focusing the sources, the observed travel-time in the CFP-gather describes the propagation from the focus point to the receivers. If the correct propagation operator is used, the measured travel-times should be the same as the time-reversed focusing operator due to reciprocity. This makes it possible to iteratively update the focusing operator using the data only and allows the material to be imaged without explicit knowledge of the anisotropic material parameters. Furthermore, the determined propagation operator can also be used to invert for the anisotropic medium parameters. This paper details the proposed technique and demonstrates its use on simulated array data from a specimen of Inconel single-crystal alloy commonly used in the aeronautical and nuclear industries.

36 MATERIALS SCIENCE↗

Piezoelectric material for use in a nuclear reactor core

In radiation environments ultrasonic nondestructive evaluation has great potential for improving reactor safety and furthering the understanding of radiation effects and materials. In both nuclear power plants and materials test reactors, elevated temperatures and high levels of radiation present challenges to ultrasonic NDE methodologies. The challenges are primarily due to the degradation of the ultrasonic sensors utilized. We present results from the operation of a ultrasonic piezoelectric transducer, composed of bulk single crystal AlN, in a nuclear reactor core for over 120 MWHrs. The transducer was coupled to an aluminum cylinder and operated in pulse echo mode throughout the irradiation. In addition to the pulse echo testing impedance data were obtained. Further, the piezoelectric coefficient d{sub 33} was measured prior to irradiation and found to be 5.5 pC/N which is unchanged from as-grown samples, and in fact higher than the measured d{sub 33} for many as-grown samples.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Growth of AlN/SiC/AlN quantum wells on Si(111) by molecular beam epitaxy

AlN/SiC/AlN quantum well structures have been grown on Si(111) by molecular beam epitaxy at 700 deg. C. The microstructure is single-crystal wurtzite AlN and cubic SiC with stacking sequence disorder. Depth profiles taken by Auger electron spectroscopy indicate that the ratio of Si to C is about 5:4. Layers with lower carbon content exhibit regions with five-fold superstructures. Fourier transform infrared spectroscopy confirms the presence of Al-N and Si-C bonds. Our work demonstrates the feasibility of a low-temperature synthesis route for epitaxial SiC and AlN/SiC heterostructures on Si.

36 MATERIALS SCIENCE↗

Magnetic anisotropy engineering: Single-crystalline Fe films on ion eroded ripple surfaces

We present a method to preselect the direction of an induced in-plane uniaxial magnetic anisotropy (UMA) in thin single-crystalline Fe films on MgO(001). Ion beam irradiation is used to modulate the MgO(001) surface with periodic ripples on the nanoscale. The ripple direction determines the orientation of the UMA, whereas the intrinsic cubic anisotropy of the Fe film is not affected. Thus, it is possible to superimpose an in-plane UMA with a precision of a few degrees - a level of control not reported so far that can be relevant for example in spintronics.

36 MATERIALS SCIENCE↗

Characterization of the local crystallinity via reflectance of very slow electrons

The reflectance of very slow electrons from solids and its electron energy dependence are shown as characteristic for the crystal system and its spatial orientation so they can serve, e.g., to fingerprinting the orientation of grains in polycrystals. Measurements on single crystals and polycrystals are validated via electron backscatter diffraction analyses. Sensitivity of the method to fine details of crystallinity is demonstrated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Characterization of GaN nanowires grown on PSi, PZnO and PGaN on Si (111) substrates by thermal evaporation

In this research, we used an easy and inexpensive method to synthesize highly crystalline GaN nanowires (NWs); on different substrates such as porous silicon (PSi), porous zinc oxide (PZnO) and porous gallium nitride (PGaN) on Si (111) wafer by thermal evaporation using commercial GaN powder without any catalyst. Micro structural studies by scanning electron microscopy and transmission electron microscope measurements reveal the role of different substrates in the morphology, nucleation and alignment of the GaN nanowires. The degree of alignment of the synthesized nanowires does not depend on the lattice mismatch between wires and their substrates. Further structural and optical characterizations were performed using high resolution X-ray diffraction and energy-dispersive X-ray spectroscopy. Results indicate that the nanowires are of single-crystal hexagonal GaN. The quality and density of grown GaN nanowires for different substrates are highly dependent on the lattice mismatch between the nanowires and their substrates and also on the size of the porosity of the substrates. Nanowires grown on PGaN have the best quality and highest density as compared to nanowires on other substrates. By using three kinds of porous substrates, we are able to study the increase in the alignment and density of the nanowires.

36 MATERIALS SCIENCE↗

Femtosecond laser-induced periodic surface structures on silica

The formation of laser-induced periodic surface structures (LIPSS) on two different silica polymorphs (single-crystalline synthetic quartz and commercial fused silica glass) upon irradiation in air with multiple linearly polarized single- and double-fs-laser pulse sequences ({tau} = 150 fs pulse duration, {lambda} = 800 nm center wavelength, temporal pulse separation {Delta}t < 40 ps) is studied experimentally and theoretically. Two distinct types of fs-LIPSS [so-called low-spatial-frequency LIPSS (LSFL) and high-spatial-frequency LIPSS (HSFL)] with different spatial periods and orientations were identified. Their appearance was characterized with respect to the experimental parameters peak laser fluence and number of laser pulses per spot. Additionally, the 'dynamics' of the LIPSS formation was addressed in complementary double-fs-pulse experiments with varying delays, revealing a characteristic change of the LSFL periods. The experimental results are interpreted on the basis of a Sipe-Drude model considering the carrier dependence of the optical properties of fs-laser excited silica. This new approach provides an explanation of the LSFL orientation parallel to the laser beam polarisation in silica - as opposed to the behaviour of most other materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Charge transport of ultrathin CoPc films on LaAlO{sub 3}(001) substrate

We have grown cobalt-phthalocyanine (CoPc) films of thickness 20nm on LaAlO{sub 3} (001) substrate using molecular beam epitaxy (MBE). The existence of natural twin boundary in LaAlO{sub 3} single crystal assist in ordering of molecule along the twin boundary direction. The ordering is confirmed by GIXRD and rocking measurement. The charge transport measurement along ordered direction shows a very high mobility of 7 cm{sup 2}V{sup -1}Sec{sup -1} at room temperature and current-voltage (J-V) characteristics can be described by trap free space charge limited conduction (SCLC). In contrast conductivity, measured across the ordered direction, is four orders lower as compared to the conductivity, along the ordered direction. The low conductivity is attributed to the traps at the grain boundary between two ordered regions. The J-V characteristics, measured across the ordered direction, can easily be described by trap controlled space charge limited conduction.

36 MATERIALS SCIENCE↗

Characterization of single crystal chemical vapor deposition diamond detectors for neutron spectrometry

Detectors made from artificial chemical vapor deposition single crystal diamond have shown great potential for fast neutron spectrometry. In this paper, we present the results of measurements made at the Physikalisch-Technische Bundesanstalt accelerator using neutron fields in the energy range from 7 MeV to 16 MeV. This study presents the first results of the characterization of the detector in this energy range.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

On the radiation hardness of (Mg,Zn)O thin films grown by pulsed-laser deposition

We report on electrical properties and the generation of the E4 defect in pulsed-laser deposited Mg{sub x}Zn{sub 1-x}O thin films irradiated with 2.25 MeV protons. Whereas the electrical properties of the Schottky diodes as well as the net doping density of the samples did not change due to irradiation, the concentration of the E4 defect increased proportional to the applied dose as revealed by deep level transient spectroscopy. The generation rate {eta}, is for binary ZnO thin films about 40 cm{sup -1}, a factor of 3 higher than in melt-grown single crystals, and increases to about 100 cm{sup -1} for the Mg-alloyed thin films.

36 MATERIALS SCIENCE↗

Simultaneous imaging/reflectivity measurements to assess diagnostic mirror cleaning

Practical methods to clean ITER's diagnostic mirrors and restore reflectivity will be critical to ITER's plasma operations. We describe a technique to assess the efficacy of mirror cleaning techniques and detect any damage to the mirror surface. The method combines microscopic imaging and reflectivity measurements in the red, green, and blue spectral regions and at selected wavelengths. The method has been applied to laser cleaning of single crystal molybdenum mirrors coated with either carbon or beryllium films 150-420 nm thick. It is suitable for hazardous materials such as beryllium as the mirrors remain sealed in a vacuum chamber.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗