Search NASA⌕ Search

SEARCH · Search NASA

Results for “Microstructures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,657 records · Page 92

Microstructures and mechanical properties of a welded CoCrFeMnNi high-entropy alloy

The response of the CoCrFeMnNi high-entropy alloy to weld thermal cycles was investigated to determine its applicability as an engineering structural material. Two processes were used: high-energy-density, low-heat-input electron beam (EB) welding and low-energy-density, high-heat-input gas tungsten arc (GTA) welding. Weldability was determined through comprehensive microstructural and mechanical property characterisation of the welds. The welds did not develop solidification cracking or heat-affected zone cracks. The microstructures in weld fusion zones are similar to that in the as-cast materials, consisting of large columnar grains with dendrite. The dendrite arm spacing and the extent of elemental segregation were less in the welds than in the cast ingot, and also were less pronounced in the EB weld than in the GTA weld. Compositional microsegregation between dendritic cores and interdendritic regions of the welds was insignificant. Both welds exhibited slightly higher yield strengths than the base metal. The EB weld possessed comparable tensile strength and ductility to that of the base metal. In comparison, the GTA weld maintained ∼80% of the base metal's tensile strength and 50% of the ductility.

36 MATERIALS SCIENCE↗

Microstructures and properties of high-entropy alloy films and coatings: a review

In the past 14 years, as a branch of high-entropy alloy (HEA) materials, HEA films and coatings have exhibited the attractive and unique properties, relative to the conventional film and coating materials. The recent research and development of HEA films and coatings are reviewed in this paper. At first, the basic concept of HEAs films and coatings are introduced. Then, their preparation technologies, microstructures and appealing properties are summarized. Moreover, the possible reasons and design criteria for achieving the excellent properties are discussed. Finally, the suggested future research work for the HEA films and coatings are outlined. Preparation technologies, microstructures, and properties of HEA films and coatings are reviewed in this paper. The design criteria and suggested research directions are further discussed and proposed.

36 MATERIALS SCIENCE↗

Microstructure effects for Casimir forces in chiral metamaterials

We examine a recent prediction for the chirality dependence of the Casimir force in chiral metamaterials by numerical computation of the forces between the exact microstructures, rather than homogeneous approximations. Although repulsion in the metamaterial regime is rigorously impossible, it is unknown whether a reduction in the attractive force can be achieved through suitable material engineering. We compute the exact force for a chiral bent-cross pattern, as well as forces for an idealized ''omega''-particle medium in the dilute approximation and identify the effects of structural inhomogeneity (i.e., proximity forces and anisotropy). We find that these microstructure effects dominate the force for separations where chirality was predicted to have a strong influence. At separations where the homogeneous approximation is valid, in even the most ideal circumstances the effects of chirality are less than 10{sup -4} of the total force, making them virtually undetectable in experiments.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Inferring low-dimensional microstructure representations using convolutional neural networks

We apply here recent advances in machine learning and computer vision to a central problem in materials informatics: the statistical representation of microstructural images. We use activations in a pretrained convolutional neural network to provide a high-dimensional characterization of a set of synthetic microstructural images. Next, we use manifold learning to obtain a low-dimensional embedding of this statistical characterization. We show that the low-dimensional embedding extracts the parameters used to generate the images. Finally, according to a variety of metrics, the convolutional neural network method yields dramatically better embeddings than the analogous method derived from two-point correlations alone.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

(U)SAXS characterization of porous microstructure of chert: insights into organic matter preservation

This study characterizes the microstructure and mineralogy of 132 (ODP sample), 1000 and 1880 million-year-old chert samples. By using ultra-small-angle X-ray scattering (USAXS), wide-angle X-ray scattering and other techniques, the preservation of organic matter (OM) in these samples is studied. The scarce microstructural data reported on chert contrast with many studies addressing porosity evolution in other sedimentary rocks. The aim of this work is to solve the distribution of OM and silica in chert by characterizing samples before and after combustion to pinpoint the OM distribution inside the porous silica matrix. The samples are predominantly composed of alpha quartz and show increasing crystallite sizes up to 33 ± 5 nm (1σ standard deviation or SD). In older samples, low water abundances (~0.03%) suggest progressive dehydration. (U)SAXS data reveal a porous matrix that evolves over geological time, including, from younger to older samples, (1) a decreasing pore volume down to 1%, (2) greater pore sizes hosting OM, (3) decreasing specific surface area values from younger (9.3 ± 0.1 m 2 g -1 ) to older samples (0.63 ± 0.07 m 2 g -1 , 1σ SD) and (4) a lower background intensity correlated to decreasing hydrogen abundances. The pore-volume distributions (PVDs) show that pores ranging from 4 to 100 nm accumulate the greater volume fraction of OM. Raman data show aromatic organic clusters up to 20 nm in older samples. Raman and PVD data suggest that OM is located mostly in mesopores. Observed structural changes, silica–OM interactions and the hydro­phobicity of the OM could explain the OM preservation in chert.

(U)SAXS↗

Microstructure Evolution and Effect on Resistivity for Cu Nanointerconnects and Beyond

In this paper, we investigate the microstructure evolution in Cu, Co and Ru nanointerconnects and the scaling effect on resistivity. The scaling effect on microstructure of Cu interconnects was analyzed to the 24 nm linewidth for the 14 nm node using a high-resolution TEM precession microdiffraction technique. The TEM study was supplemented by a Monte Carlo simulation to investigate grain growth in nanointerconnects based on local energy minimization. The scaling effect on electrical resistivity was analyzed for Cu, Ru and Co nanointerconnects, taking into account the contributions from surface and grain boundary scatterings. The results for Cu and Co are consistent with recent experiments.

36 MATERIALS SCIENCE↗

Theoretical Correlation of Elemental Distribution of Nd and Pr in Ce-Fe-B Microstructure With Hard Magnetic Properties

Relatively resource-rich but property inferior-Ce-Fe-B magnet can be improved by partial replacement of Ce by Nd and/or Pr. In addition to the amount of Nd/Pr, their distribution profile in microstructure plays an important role. From our first principles density functional theory (DFT) calculation, the substitution energy of Ce by Pr/Nd is negative in Ce 2 Fe 14 B (2:14:1) while that for laves phase, CeFe 2 is positive, implying that Nd/Pr stabilize 2:14:1 and suppress the formation of the CeFe 2 phase. Further, micromagnetic simulation indicates that homogenized distribution of Nd/Pr improves squareness of demagnetization curve, while core (Ce-rich)-shell (Nd/Pr-rich) 2:14:1 grain structure enhances coercivity. Magnetic properties of Ce-Fe-B can be optimized by manipulating distribution profile of chemical element in microstructure based on their subtle difference in thermodynamic property, which is an effective pathway to design optimized chemical composition and processing route for high-performance magnet.

36 MATERIALS SCIENCE↗

Latent Pitfalls in Microstructure-Based Modeling for Thermally Aged 9Cr-1Mo-V Steel (Grade 91)

A case study was conducted on a mechanistic model development that predicted tensile strength deterioration with thermal aging of 9Cr-1Mo-V steel in supporting the 60-year design life expected for advanced nuclear reactors. For property prediction beyond practical testing times, mechanistic modeling is highly desired, as it taps into the physics of structure–property relationships and therefore can generate reliable results for extrapolation. Meanwhile, as mechanistic models are often complicated, reflecting the intricacy of microstructure and strengthening mechanisms, pitfalls that are difficult to detect often exist. Here, this paper discusses latent pitfalls that are common in mechanistic modeling or specific in this 9Cr-1Mo-V case development through using the American Society of Mechanical Engineers verification and validation in computational solid mechanics (ASME V&V 10) standard for evaluating credibility of modeling in materials engineering. Suggestions are also made for enhancing reliability of microstructure-based modeling.

36 MATERIALS SCIENCE↗

Effect of process conditions on the microstructural formation of dc reactively sputter deposited AlN

Thin film aluminum nitride (AlN), because of its attractive properties, is a material with many applications. Its microstructure and hence properties are greatly influenced by the deposition process conditions. In this work, AlN was reactively deposited in a dc magnetron sputtering system at different proportions of nitrogen in the process gas mixture and at different process conditions. The microstructure and composition of the films were analyzed using x-ray diffraction data, energy dispersive spectroscopy, and scanning electron microscopy. Results show that for a process gas pressure of 0.67 Pa, a magnetron power of 100 W, and a substrate-target distance of 10 cm, a near stoichiometeric AlN can be prepared at nitrogen proportions as low as 20%. At these process conditions, (002) was the preferred crystal orientation. Dense fibrous structures were obtained, especially at low deposition rates with high proportions of nitrogen. Increase in magnetron power and decrease in distance result in a more porous structure. High kinetic energies (average) of the sputtered Al particles and high deposition rates tend to favor AlN(101) formation, while low kinetic energies of the Al particles and low deposition rates generally favor more of the AlN(100) formation.

36 MATERIALS SCIENCE↗

Microstructure and mechanical properties of Ti–B–C–N–Si nanocomposite films deposited by unbalanced magnetron sputtering

Quinary Ti–B–C–N–Si nanocomposite thin films were deposited on AISI 304 stainless steel substrates by d.c. unbalanced magnetron sputtering from a TiB{sub 2}–TiC compound target and a pure Si target. The relationship between microstructure and mechanical properties of the films was investigated in terms of the nanosized crystallites/amorphous system. The synthesized Ti–B–C–N–Si films were characterized using x-ray diffraction, x-ray photoelectron spectroscopy, atomic force microscopy, and high resolution transmission electron microscopy. The results showed that the Ti–B–C–N–Si films were nanocomposites composed of nanosized TiB{sub 2}, TiC, and TiSi{sub 2} crystallites (2-3 nm in size) embedded in an amorphous matrix. The addition of Si to the Ti–B–C–N film led to precipitation of nanosized crystalline TiSi{sub 2} and percolation of amorphous SiC phases. The Ti–B–C–N–Si films with up to 7 at. % Si content presented high hardness (≥35 GPa), H/E (≥0.0095), and W{sub e} (>50%) with compressive residual stress (∼0.5 GPa). A systematic investigation on the microstructure and mechanical properties of Ti–B–C–N–Si films containing different Si contents is reported.

36 MATERIALS SCIENCE↗

Correlation between microstructure and thermionic electron emission from Os-Ru thin films on dispenser cathodes

Osmium-ruthenium films with different microstructures were deposited onto dispenser cathodes and subjected to 1000 h of close-spaced diode testing. Tailored microstructures were achieved by applying substrate biasing during deposition, and these were evaluated with scanning electron microscopy, x-ray diffraction, and energy dispersive x-ray spectroscopy before and after close-spaced diode testing. Knee temperatures determined from the close-spaced diode test data were used to evaluate cathode performance. Cathodes with a large (10-11) Os-Ru film texture possessed comparatively low knee temperatures. Furthermore, a low knee temperature correlated with a low effective work function as calculated from the close-spaced diode data. It is proposed that the formation of strong (10-11) texture is responsible for the superior performance of the cathode with a multilayered Os-Ru coating.

36 MATERIALS SCIENCE↗

Vapor deposition on doublet airfoil substrates: Control of coating thickness and microstructure

Gas jet assisted vapor deposition processes for depositing coatings are conducted at higher pressures than conventional physical vapor deposition methods, and have shown promise for coating complex shaped substrates including those with non-line-of-sight (NLS) regions on their surface. These regions typically receive vapor atoms at a lower rate and with a wider incident angular distribution than substrate regions in line-of-sight (LS) of the vapor source. To investigate the coating of such substrates, the thickness and microstructure variation along the inner (curved) surfaces of a model doublet airfoil containing both LS and NLS regions has been investigated. Results from atomistic simulations and experiments confirm that the coating's thickness is thinner in flux-shadowed regions than in other regions for all the coating processes investigated. They also indicated that the coatings columnar microstructure and pore volume fraction vary with surface location through the LS to NLS transition zone. A substrate rotation strategy for optimizing the thickness over the entire doublet airfoil surface was investigated, and led to the identification of a process that resulted in only small variation of coating thickness, columnar growth angle, and pore volume fraction on all doublet airfoil surfaces.

42 ENGINEERING↗

Effect of microstructural evolution on mechanical and tribological properties of Ti-doped DLC films: How was an ultralow friction obtained?

This paper examined the evolution of microstructure and its effect on the mechanical and tribological properties of ultralow friction Ti-doped diamondlike carbon (DLC) films, by adjusting the CH{sub 4}/Ar ratio under constant radio frequency discharge power and bias. The Raman, high resolution transmission electron microscopy, atomic force microscope and nanoindentation measurements consistently reveal or indicate the formation of curved graphene sheets or fullerenelike nanostructures with increasing CH{sub 4}/Ar ratio. The superior frictional performance (0.008–0.01) of Ti-DLC films can be attributed to the special microstructure related to the development of embedded fullerenelike nanostructures as a result of incorporation of TiO{sub 2} clusters. The contributing factors include high hardness and cohesion, excellent toughness, high load-bearing capacity, as well as the ultralow shear resistance transform layer and the excellent antioxidation stability brought by the doped Ti.

36 MATERIALS SCIENCE↗

Dynamics of the microstructure of current channels and the generation of high-energy electrons in nanosecond discharges in air

The results of the three-dimensional numerical simulation of the dynamics of the microstructure of high-voltage nanosecond discharges in air at atmospheric pressure are presented. It is established that the fast (at a time of ≈10 ns) broadening and significant decrease in the gas concentration in the microchannels occur as a result of the ohmic heating of microchannels with the diameter of 1–30 μm. It was shown that the broadening of microchannels in a nanosecond diffusive discharge provides an increase in the ratio of the electric field strength to the gas concentration in microchannels to values sufficient for the generation highenergy electron beams and X-ray bremsstrahlung in them. Features of the dynamics of the system of microchannels and its effect on the efficiency of the generation of high-energy electrons in discharges developing in the microstructuring regime of the current channels are considered.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Microstructure and optical properties of In{sub 2}S{sub 3} films produced by thermal evaporation

The data on the influence of the microstructure of In{sub 2}S{sub 3} films produced by thermal evaporation upon their optical properties in relation to the film's thickness are reported. The atomic force spectroscopy data for the layers that are produced in identical technological conditions, but exhibit different spectral positions of the optical absorption edge are presented and discussed. Variations in the optical band gap from 2.0 to 3.6 eV under variations in the thickness of the In{sub 2}S{sub 3} films from 800-450 nm to 50-30 nm are observed. The variations are interpreted as a result of variations in the content of grains, specific in dimensions and microstructure.

36 MATERIALS SCIENCE↗

Formation and Properties of Locally Tensile Strained Ge Microstructures for Silicon Photonics

The formation and properties of locally tensile strained Ge microstructures (“microbridges”) based on Ge layers grown on silicon substrates are investigated. The elastic-strain distribution in suspended Ge microbridges is analyzed theoretically. This analysis indicates that, in order to attain the maximum tensile strain within a microbridge, the accumulation of strain in all corners of the fabricated microstructure has to be minimized. Measurements of the local strain using Raman scattering show significant enhancement of the tensile strain from 0.2–0.25% in the initial Ge film to ~2.4% in the Ge microbridges. A considerable increase in the luminescence intensity and significant modification of its spectrum in the regions of maximum tensile strain in Ge microbridges and in their vicinity as compared to weakly strained regions of the initial Ge film is demonstrated by microphotoluminescence spectroscopy.

36 MATERIALS SCIENCE↗

Influence of Annealing Temperature on the Microstructure and Morphology of TiN Films Synthesized by Dual Magnetron Sputtering

TiN films synthesized on leucosapphire substrates by dual magnetron sputtering have been annealed in vacuum at 600, 700, 800, and 900°C for 2 min. The microstructure and morphology of the films have been studied by X-ray diffraction and scanning electron microscopy at different temperatures. It has been found that annealing changes the microstructure, texture, grain size, and surface roughness of the TiN films.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗