Search NASA⌕ Search

SEARCH · Search NASA

Results for “Network structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,657 records · Page 92

The Application of Radon for Mapping Open Fracture Networks in a Thin Vadose Zone

The use of naturally occurring tracers to elucidate subsurface flow and transport of water and gasses through fractured vadose zones represents a powerful and inexpensive methodology for understanding geologic systems. Our study was conducted at Sheply’s Hill, a highly fractured granite highland at the old Fort Devens military base. This study evaluates the applicability of using cheap, readily available passive radon detectors to identify conductive structures (e.g., fractures and fracture networks) in fracture-dominated vadose zones. Radon data from this study provides strong evidence that, even within an intensively fractured system, a relatively smaller subset of the fractures is responsible for the majority of the vertical migration of gas and water that recharges contaminated groundwater sites. Our study found that zones of high recharge potential associated with open fracture networks could be identified based on the 222 Rn flux within the highly fractured Shepley’s Hill. Based on the results of this study, 222 Rn is an environmental tracer capable of efficiently detecting major bedrock fracture sets in the vadose zone responsible for water infiltration into contaminated aquifers. Results from the Shepley’s Hill study show a clear spatial correlation of elevated 222 Rn concentrations emanating from fracture zones previously identified by independent geologic studies. At Shepley’s Hill, the 222 Rn concentrations measured from detector locations directly above the major bedrock fractures, located within the Disc Golf Fracture Zone (DGFZ) and the Nona-Shep Fracture Zone (NSFZ), were almost exclusively the highest values measured in the study. Conversely, probes located above areas of less-fractured bedrock, although highly fractured, showed relatively low 222 Rn concentrations. Furthermore, these two observations provide strong supporting evidence that not all fractures are equal when it comes to their ability to transmit gas or water into and out of the subsurface.

58 GEOSCIENCES↗

Etch-free Formation of Porous Silicon by High-energy Ion Irradiation

In this study, porous silicon was fabricated without any chemical etching by self-ion implantation of crystalline Si performed at high temperature and at high fluences. The irradiated silicon samples, which remained crystalline under high temperature ion irradiation, exhibited an increased porous fraction with increasing sample temperature at a given fluence, up to the maximum tested temperature of 650º C. Extremely high ion fluences of at least 2 x 10¹⁸ ions/cm² were necessary to produce significant void growth. Comparisons between the porous silicon structures and irradiation-induced porous networks in Ge, GaSb, and InSb are made, and differences in the formation conditions for these porous networks are discussed.

Environmental Molecular Sciences Laboratory↗

Ultra-large-scale ab initio quantum chemical computation of bio-molecular systems: The case of spike protein of SARS-CoV-2 virus

The COVID-19 pandemic poses a severe threat to human health with an unprecedented social and economic disruption. Spike (S) glycoprotein of the SARS-CoV-2 virus is pivotal in understanding the virus anatomy, since it initiates the first contact with the ACE2 receptor in the human cell. We report results of ab initio computation of the spike protein, the largest ab initio quantum chemical computation to date on any bio-molecular system, using a divide and conquer strategy by focusing on individual structural domains. In this approach we divided the S-protein into seven structural domains: N-terminal domain (NTD), receptor binding domain (RBD), subdomain 1 (SD1), subdomain 2 (SD2), fusion peptide (FP), heptad repeat 1 with central helix (HR1-CH) and connector domain (CD). The entire Chain A has 14,488 atoms including the hydrogen atoms but excluding the amino acids with missing coordinates based on the PDB data (ID: 6VSB). The results include structural refinement, ab initio calculation of intramolecular bonding mechanism, 3- dimensional non-local inter-amino acid interaction with implications for the inter-domain interaction. Details of the electronic structure, interatomic bonding, partial charge distribution and the role played by hydrogen bond network are discussed. In the interaction among structural domains, we present new insights for crucial hinge-like movement and fusion process. Extension of such calculation to the interface between the S-protein binding domain and ACE2 receptor can provide a pathway for computational understanding of mutations and the design of therapeutic drugs to combat the COVID-19 pandemic.

59 BASIC BIOLOGICAL SCIENCES↗

Nanoporous silica gel structures and evolution from reactive force field-based molecular dynamics simulations

Nanoporous silica-rich gel formed on silicate glass surfaces during dissolution in aqueous environment is critical in elucidating the corrosion mechanisms and the long-term residual dissolution behaviors. Silica gel models were created using two types of methods with reactive force field-based molecular dynamics simulations. The results show that the remnant silica gels created from the ISG bulk structure have a more isolated and closed pore morphology and slightly higher glass network connectivity. This contrasts with the gel structures created by hydrogarnet defect formation that exhibit more connected pore morphologies. The remnant gel structures show lower water diffusivity which was explained by the nano-confinement effect of water molecules due to frequent interactions of water molecules with adjacent silica walls and the more isolated pore morphology in the remnant gel structures. These results reveal the complexity in terms of micro and atomic structures of these silica gels, and both structure features have impact on water transport in the gel layer hence the passivating effect that controls the long-term dissolution behavior of these glasses.

36 MATERIALS SCIENCE↗

The NASA Science Internet: An integrated approach to networking

An integrated approach to building a networking infrastructure is an absolute necessity for meeting the multidisciplinary science networking requirements of the Office of Space Science and Applications (OSSA) science community. These networking requirements include communication connectivity between computational resources, databases, and library systems, as well as to other scientists and researchers around the world. A consolidated networking approach allows strategic use of the existing science networking within the Federal government, and it provides networking capability that takes into consideration national and international trends towards multivendor and multiprotocol service. It also offers a practical vehicle for optimizing costs and maximizing performance. Finally, and perhaps most important to the development of high speed computing is that an integrated network constitutes a focus for phasing to the National Research and Education Network (NREN). The NASA Science Internet (NSI) program, established in mid 1988, is structured to provide just such an integrated network. A description of the NSI is presented.

Rounds, Fred↗

Bioreactors including enzyme-embedded multicomponent polymers

According to one general embodiment, a membrane, includes a polymeric network configured to separate a first fluid and a second fluid, where the first and second fluids are different; and a plurality of enzymatic reactive components embedded within the polymeric network. According to another embodiment, a bioreactor includes a lattice of three dimensional structures, each structure including a membrane having: a polymeric network configured to separate a first fluid and a second fluid, where the first and second fluids are different; and a plurality of enzymatic reactive components embedded within the polymeric network.

59 BASIC BIOLOGICAL SCIENCES↗

Computational synthesis of a new generation of 2D-based perovskite quantum materials

Perovskite-based optoelectronic devices have emerged as a promising energy source due to their potential for scalable production. This study introduces “perovskene,” a novel class of 2D materials derived from the ABC3-like perovskites, synthesized via a data-driven, high-throughput computational strategy. We harness machine learning and multitarget deep neural networks to systematically investigate the structure–property relations, paving the way for targeted material design and optimization in fields such as renewable energy, electronics, and catalysis. The characterization of over 1500 synthesized structures shows that more than 500 structures are stable, revealing properties such as ultra-low work function and large magnetic moment, underscoring the potential for advanced technological applications.

2D materials↗

Neuralized fermionic tensor networks for quantum many-body systems

In this work, we describe a class of neuralized fermionic tensor network states (NN-fTNSs) that introduce nonlinearity into fermionic tensor networks through configuration-dependent neural network transformations of the local tensors. The construction uses the fTNS algebra to implement a natural fermionic sign structure and is compatible with standard tensor network algorithms but gains enhanced expressivity through the neural network parametrization. Using the 1D and 2D Fermi-Hubbard models as benchmarks, we demonstrate that NN-fTNSs achieve order of magnitude improvements in the ground-state energy compared to pure fTNSs with the same bond dimension and can be systematically improved through both the tensor network bond dimension and the neural network parametrization. Compared to existing fermionic neural quantum states based on Slater determinants and Pfaffians, NN-fTNSs offer a physically motivated alternative fermionic structure. Furthermore, compared to such states, NN-fTNSs naturally exhibit improved computational scaling and we demonstrate a construction that achieves linear scaling with the lattice size.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Determining root correspondence between previously and newly detected objects

A system that applies attribute and topology based change detection to networks of objects that were detected on previous scans of a structure, roadway, or area of interest. The attributes capture properties or characteristics of the previously detected objects, such as location, time of detection, size, elongation, orientation, etc. The topology of the network of previously detected objects is maintained in a constellation database that stores attributes of previously detected objects and implicitly captures the geometrical structure of the network. A change detection system detects change by comparing the attributes and topology of new objects detected on the latest scan to the constellation database of previously detected objects.

97 MATHEMATICS AND COMPUTING↗

Attribute and topology based change detection in a constellation of previously detected objects

A system that applies attribute and topology based change detection to networks of objects that were detected on previous scans of a structure, roadway, or area of interest. The attributes capture properties or characteristics of the previously detected objects, such as location, time of detection, size, elongation, orientation, etc. The topology of the network of previously detected objects is maintained in a constellation database that stores attributes of previously detected objects and implicitly captures the geometrical structure of the network. A change detection system detects change by comparing the attributes and topology of new objects detected on the latest scan to the constellation database of previously detected objects.

97 MATHEMATICS AND COMPUTING↗

Textile Inspired Lithium-Oxygen Battery Cathode with Decoupled Oxygen and Electrolyte Pathways

The lithium–air (Li–O 2 ) battery has been deemed one of the most promising next–generation energy–storage devices due to its ultrahigh energy density. However, in conventional porous carbon–air cathodes, the oxygen gas and electrolyte often compete for transport pathways, which limit battery performance. Here, a novel textile–based air cathode is developed with a triple–phase structure to improve overall battery performance. The hierarchical structure of the conductive textile network leads to decoupled pathways for oxygen gas and electrolyte: oxygen flows through the woven mesh while the electrolyte diffuses along the textile fibers. Due to noncompetitive transport, the textile–based Li–O 2 cathode exhibits a high discharge capacity of 8.6 mAh cm –2 , a low overpotential of 1.15 V, and stable operation exceeding 50 cycles. The textile–based structure can be applied to a range of applications (fuel cells, water splitting, and redox flow batteries) that involve multiple phase reactions. In conclusion, the reported decoupled transport pathway design also spurs potential toward flexible/wearable Li–O 2 batteries.

25 ENERGY STORAGE↗

Characterization of River Networks: A GIS Approach and Its Applications

Abstract Fluvial geomorphology provides the basis for characterizing complex river networks and evaluating biophysical processes within watersheds. Understanding the spatial organization of morphological features, their influencing processes, and resultant geomorphic diversity in stream networks are important for efficient restoration, river health assessment, and improving our knowledge of the resilience of riverine landscapes. River characterization is a means to determine the biophysical character of river networks but many methods are fraught with pitfalls, such as the use of incorrect variables and limited acknowledgment of the hierarchical organization of rivers. In this paper, a top‐down geographic information system‐based approach for determining the physical typology of river networks is outlined. A suite of multivariate analyses are used to develop a nomenclature for functional process zones (FPZs) — large tracts of the river network with similar hydro‐geomorphological character. Applied to the Little Miami River, Ohio, six distinct FPZs emerged, which had a nonuniform distribution along the river network. Some FPZs repeated downstream; others were rare in terms of total length and number of FPZ segments. The physical structure of the Little Miami River network was analyzed using a series of community metrics. Application of this approach for river monitoring, establishing reference conditions, as well as management of threatened and endangered species and asset trading is highlighted.

Thoms, Martin↗

Approximate Latent Factor Algorithm for Scenario Selection and Weighting in Transmission Expansion Planning

One major difficulty in transmission expansion planning is selecting the representative scenarios to use to evaluate candidate transmission networks. The variability in demand and renewable generation makes the inclusion of several scenarios critical when calculating reliability and cost, but including too many scenarios in an optimization is computationally intractable. To reduce the number of representative operating conditions needed to obtain an accurate approximation of the system, we propose a method rooted in multivariate statistics that exploits the latent correlative structure between different scenarios and network configurations. The proposed algorithm includes an objective and rigorous way to select a subset of scenarios that provide as much information about the system as possible, and a method to accurately approximate the system cost from that scenario subset. The result is a set of scenarios and weights that are easily incorporated into traditional transmission expansion planning formulations. We apply this to a 312-bus WECC model with 8,736 distinct operating conditions. The transmission plans found with the proposed method are more reliable and have a lower total cost than those from other scenario reduction techniques, as well as a smaller error between the expected system performance from the optimization objective and the actual system performance.

42 ENGINEERING↗

Zebra: A striped network file system

The design of Zebra, a striped network file system, is presented. Zebra applies ideas from log-structured file system (LFS) and RAID research to network file systems, resulting in a network file system that has scalable performance, uses its servers efficiently even when its applications are using small files, and provides high availability. Zebra stripes file data across multiple servers, so that the file transfer rate is not limited by the performance of a single server. High availability is achieved by maintaining parity information for the file system. If a server fails its contents can be reconstructed using the contents of the remaining servers and the parity information. Zebra differs from existing striped file systems in the way it stripes file data: Zebra does not stripe on a per-file basis; instead it stripes the stream of bytes written by each client. Clients write to the servers in units called stripe fragments, which are analogous to segments in an LFS. Stripe fragments contain file blocks that were written recently, without regard to which file they belong. This method of striping has numerous advantages over per-file striping, including increased server efficiency, efficient parity computation, and elimination of parity update.

Hartman, John H.↗

Fluorescent aggregate structure revealed in bisphenol F epoxy thermoset

Bisphenol F (BPF) epoxy resin is a prepolymer component of thermosets used in construction of reinforced carbon fiber composites (RCFC). The fluorescence of this resin can provide information about chemical and structural alterations of the thermoset from thermal or mechanical damage. While some work has investigated the fluorescence spectra of bisphenol A epoxy resin, a structural analog of BPF, none have studied BPF. The purpose of this study is to investigate the baseline fluorescence spectra of the BPF epoxy resin for features that could be utilized for monitoring damage and structural alterations. Bisphenol F epoxy resin was found to have two emission peaks with a broad peak centered at 410 nm and a sharp peak centered at 550 nm. The broad emission peak was identified as the fluorescence from BPF epoxy monomer while the sharp emission peak was found to be from an aggregate structure present in the epoxy resin. It is hypothesized that this structure is an H-aggregate based on the emission features and structural stability of the aggregate compared to the alternative J-aggregate which was determined via density functional theory calculations. The H-aggregate was found to persist into one of the cured thermoset formulations evaluated but was lost when exposed to elevated temperatures below thermal degradation of the thermoset. This loss of aggregate structure was due to polymer network rearrangement. This new fluorescence signature can be used as an indicator of polymer network rearrangement from thermal exposure which may alter the expected material performance and precede thermal degradation.

36 MATERIALS SCIENCE↗

Coronal Heating and the Magnetic Flux Content of the Network

Previously, from analysis of SOHO/EIT coronal images in combination with Kitt Peak magnetograms (Falconer et al 1998, ApJ, 501, 386-396), we found that the quiet corona is the sum of two components: the e-scale corona and the coronal network. The large-scale corona consists of all coronal-temperature (T approx. 10(exp 6) K) structures larger than supergranules (>approx.30,000 km). The coronal network (1) consists of all coronal-temperature structures smaller than supergranules, (2) is rooted in and loosely traces the photospheric magnetic network, (3) has its brightest features seated on polarity dividing fines (neutral lines) in the network magnetic flux, and (4) produces only about 5% of the total coronal emission in quiet regions. The heating of the coronal network is apparently magnetic in origin. Here, from analysis of EIT coronal images of quiet regions in combination with magnetograms of the same quiet regions from SOHO/MDI and from Kitt Peak, we examine the other 95% of the quiet corona and its relation to the underlying magnetic network. We find: (1) Dividing the large-scale corona into its bright and dim halves divides the area into bright "continents" and dark "oceans" having spans of 2-4 supergranules. (2) These patterns are also present in the photospheric magnetograms: the network is stronger under the bright half and weaker under the dim half. (3) The radiation from the large-scale corona increases roughly as the cube root of the magnetic flux content of the underlying magnetic network. In contrast, Fisher et A (1998, ApJ, 508, 985-998) found that the coronal radiation from an active region increases roughly linearly with the magnetic flux content of the active region. We assume, as is widely held, that nearly all of the large-scale corona is magnetically rooted in the network. Our results, together with the result of Fisher et al (1999), suggest that either the coronal heating in quiet regions has a large non-magnetic component, or, if the heating is predominantly produced via the magnetic field, the mechanism is significantly different than in active regions. This work is funded by NASA's Office of Space Science through the Solar Physics Supporting Research and Technology Program and the Sun-Earth Connection Guest Investigator Program.

Falconer, D. A.↗

On the Maximum Mass of Accreting Primordial Supermassive Stars

Supermassive primordial stars are suspected to be the progenitors of the most massive quasars at z ∼ 6. Previous studies of such stars were either unable to resolve hydrodynamical timescales or considered stars in isolation, not in the extreme accretion flows in which they actually form. Therefore, they could not self-consistently predict their final masses at collapse, or those of the resulting supermassive black hole seeds, but rather invoked comparison to simple polytropic models. Here, we systematically examine the birth, evolution, and collapse of accreting, non-rotating supermassive stars under accretion rates of 0.01–10 M {sub ⊙} yr{sup −1} using the stellar evolution code Kepler . Our approach includes post-Newtonian corrections to the stellar structure and an adaptive nuclear network and can transition to following the hydrodynamic evolution of supermassive stars after they encounter the general relativistic instability. We find that this instability triggers the collapse of the star at masses of 150,000–330,000 M {sub ⊙} for accretion rates of 0.1–10 M {sub ⊙} yr{sup −1}, and that the final mass of the star scales roughly logarithmically with the rate. The structure of the star, and thus its stability against collapse, is sensitive to the treatment of convection and the heat content of the outer accreted envelope. Comparison with other codes suggests differences here may lead to small deviations in the evolutionary state of the star as a function of time, that worsen with accretion rate. Since the general relativistic instability leads to the immediate death of these stars, our models place an upper limit on the masses of the first quasars at birth.

79 ASTRONOMY AND ASTROPHYSICS↗