Search NASA⌕ Search

SEARCH · Search NASA

Results for “PLASMA SIMULATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,657 records · Page 92

Conditions for efficient and stable ion acceleration by moderate circularly polarized laser pulses at intensities of 10{sup 20} W/cm{sup 2}

Conditions for efficient and stable ion radiation pressure acceleration (RPA) from thin foils by circularly polarized laser pulses at moderate intensities are theoretically and numerically investigated. It is found that the unavoidable decompression of the co-moving electron layer in Light-Sail RPA leads to a change of the local electrostatic field from a ''bunching'' to a ''debunching'' profile, ultimately resulting in premature termination of ion acceleration. One way to overcome this instability is the use of a multispecies foil where the high-Z ions act as a sacrificial species to supply excess co-moving electrons for preserving stable acceleration of the lower-Z ion species. It is shown by 2D particle-in-cell simulations that 100 MeV/u monoenergetic C{sup 6+} ion beams are produced by irradiation of a Cu-C-mixed foil with laser pulses at intensities 5 x 10{sup 20} W/cm{sup 2}, which can be easily achieved by current day lasers.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Electro-hydrodynamics and kinetic modelling of polluted air flow activated by multi-tip-to-plane corona discharge

The present paper is devoted to the 2D simulation of an Atmospheric Corona Discharge Reactor (ACDR) involving 10 pins powered by a DC high voltage and positioned 7 mm above a grounded metallic plane. The corona reactor is periodically crossed by thin mono filamentary streamers with a natural repetition frequency of some tens of kHz. The simulation involves the electro-dynamic, chemical kinetic, and neutral gas hydrodynamic phenomena that influence the kinetics of the chemical species transformation. Each discharge stage (including the primary and the secondary streamers development and the resulting thermal shock) lasts about one hundred nanoseconds while the post-discharge stages occurring between two successive discharge phases last one hundred microseconds. The ACDR is crossed by a lateral air flow including 400 ppm of NO. During the considered time scale of 10 ms, one hundred discharge/post-discharge cycles are simulated. The simulation involves the radical formation and thermal exchange between the discharges and the background gas. The results show how the successive discharges activate the flow gas and how the induced turbulence phenomena affect the redistribution of the thermal energy and the chemical kinetics inside the ACDR.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Vlasov simulation of Langmuir decay instability

A parametric decay process of beam-generated Langmuir waves is examined by a one-dimensional Vlasov code simulation in the open system. It is confirmed that pump Langmuir waves decay into backscattered Langmuir and ion acoustic waves when the wave energy is higher than the thermal energy of background electrons. In the present Vlasov simulation, a large-amplitude pump Langmuir wave is excited by an electron beam. Then a backscattered Langmuir wave and a forward ion acoustic wave are excited by the parametric decay instability. When the wave energy of the backscattered Langmuir waves is also higher than the thermal energy of background electrons, backward ion acoustic waves are also excited. As a result, the wavenumber spectra of Langmuir and ion acoustic waves are broadened in both forward and backward directions, suggesting possible multiple parametric decay processes of Langmuir waves in a beam-plasma system.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Kinetic driven turbulence: Structure in space and time

The structure in space and time of a driven turbulent magnetoplasma is analyzed using kinetic simulations. For a two dimensional case with a strong uniform out-of-plane magnetic field, large scale driving produces a turbulent state that spans fluid scales to kinetic proton scales. There are fluid electrons in this hybrid representation. In near steady conditions, spectral analysis shows an almost complete absence of discrete point spectral features that would be associated with a dispersion relation and wave activity. While there is indication of a low level of wave activity, the results show that the dynamics are dominated by nonlinear activity. Implications for understanding plasma cascade, dissipation, and heating are discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Feedback instability in the magnetosphere-ionosphere coupling system: Revisited

A coupled set of the reduced magnetohydrodynamic and the two-fluid equations is applied to the magnetosphere-ionosphere (M-I) feedback interactions in relation to growth of quite auroral arcs. A theoretical analysis revisiting the linear feedback instability reveals asymptotic behaviors of the dispersion relation and a non-Hermite property in the M-I coupling. A nonlinear simulation of the feedback instability in the M-I coupling system manifests growth of the Kelvin-Helmholtz-like mode in the magnetosphere as the secondary instability. The distorted vortex and field-aligned current profiles propagating as the shear Alfven waves lead to spontaneous deformation of ionospheric density and current structures associated with auroral arcs.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Algorithm for precision subsample timing between Gaussian-like pulses

Moderately priced oscilloscopes available for the NIF power sensors and target diagnostics have 6 GHz bandwidths at 20-25 Gsamples/s (40 ps sample spacing). Some NIF experiments require cross timing between instruments be determined with accuracy better than 30 ps. A simple analysis algorithm for Gaussian-like pulses such as the 100-ps-wide NIF timing fiducial can achieve single-event cross-timing precision of 1 ps (1/50 of the sample spacing). The midpoint-timing algorithm is presented along with simulations that show why the technique produces good timing results. Optimum pulse width is found to be {approx}2.5 times the sample spacing. Experimental measurements demonstrate use of the technique and highlight the conditions needed to obtain optimum timing performance.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Electromagnetic fluctuation spectrum associated with the drift Alfven-cyclotron instability

The present paper investigates the electromagnetic fluctuation spectrum associated with the drift Alfven-cyclotron instability by means of a two-dimensional particle-in-cell simulation, which may be plausibly associated with a current disruption event. The current disruption event shows localized high-amplitude electromagnetic fluctuations. In recent theories, these fluctuation characteristics are shown to correspond to the drift Alfven-cyclotron instability. A simulation is carried out to clarify this instability. The simulation shows that the drift Alfven-cyclotron instabilities are excited in two frequency regimes, a relatively low frequency mode propagating in a quasi-perpendicular direction while the second high-frequency branch propagating in a predominantly parallel propagation direction, consistent with observations as well as with a recent theory.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Characteristics of relativistic electron mirrors generated by an ultrashort nonadiabatic laser pulse from a nanofilm

For controllable generation of an isolated attosecond relativistic electron bunch [relativistic electron mirror (REM)] with nearly solid-state density, we proposed [V. V. Kulagin et al., Phys. Rev. Lett. 99, 124801 (2007)] to use a solid nanofilm illuminated normally by an ultraintense femtosecond laser pulse having a sharp rising edge (nonadiabatic laser pulse). In this paper, the REM characteristics are investigated in a regular way for a wide range of parameters. With the help of two-dimensional (2D) particle-in-cell (PIC) simulations, it is shown that, in spite of Coulomb forces, all of the electrons in the laser spot can be synchronously accelerated to ultrarelativistic velocities by the first half-cycle of the field, which has large enough amplitude. For the process of the REM generation, we also verify a self-consistent one-dimensional theory, which we developed earlier (cited above) and which takes into account Coulomb forces, radiation of the electrons, and laser amplitude depletion. This theory shows a good agreement with the results of the 2D PIC simulations. Finally, the scaling of the REM dynamical parameters with the field amplitude and the nanofilm thickness is analyzed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Optimization of nonlinear turbulence in stellarators

We present new stellarator equilibria that have been optimized for reduced turbulent transport using nonlinear gyrokinetic simulations within the optimization loop. The optimization routine involves coupling the pseudo-spectral GPU-native gyrokinetic code GX with the stellarator equilibrium and optimization code DESC . Since using GX allows for fast nonlinear simulations, we directly optimize for reduced nonlinear heat fluxes. To handle the noisy heat flux traces returned by these simulations, we employ the simultaneous perturbation stochastic approximation (SPSA) method that only uses two objective function evaluations for a simple estimate of the gradient. We show several examples that optimize for both reduced heat fluxes and good quasi-symmetry as a proxy for low neoclassical transport. Finally, we run full transport simulations using the T3D stellarator transport code to evaluate the changes in the macroscopic profiles.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

High-energy monoenergetic protons from multistaged acceleration of thin double-layer target by circularly polarized laser

Multistaged acceleration of solid-density thin foils by ultraintense circularly polarized laser pulse is investigated. A stable radiation pressure acceleration (RPA) stage is first established. Higher dimensional effects such as transverse instabilities and enhanced electron heating then gradually make the initially opaque foil transparent to the laser light. Accordingly, the dominant acceleration mechanism changes smoothly from RPA to target normal sheath acceleration (TNSA). The transition can therefore enhance the maximum energy of the accelerated ions but broaden their energy spectrum. For a double-layer target, however, the light ions (protons) in the backlayer can be efficiently accelerated in the RPA and TNSA regimes nearly monoenergetically. Two-dimensional particle-in-cell simulations show that with this scheme a circularly polarized laser pulse of peak intensity 3.9x10{sup 22} W/cm{sup 2} can produce a collimated proton bunch that persists for many Rayleigh lengths and its peak energy can reach 4.2 GeV with FWHM of 200 MeV.

43 PARTICLE ACCELERATORS↗

Efficient laser absorption and enhanced electron yield in the laser-target interaction by using a cone-nanolayer target

A cone-nanolayer target that combines the advantages of the conical and layered geometries for electron acceleration in laser-target interaction is proposed. Two-dimensional particle-in-cell (PIC) simulations show that the cone-nanolayer target can enhance laser absorption and electron yield. With suitable choice of the laser and target parameters, the cone-nanolayer target can be a controllable source of hot electrons at desired energy ranges.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A high-efficiency overmoded klystron-like relativistic backward wave oscillator with low guiding magnetic field

A klystron-like relativistic backward wave oscillator with a ratio of transverse dimension to free-space wavelength being about four is presented. In the beam-wave interaction region, the electron beam interacts with surface wave and volume wave simultaneously. The cathode holder plays an important role in the reflection of backward waves. A guard electrode, an electron collector ring, and a reflection ring are used to optimize the beam-wave interaction. The particle in cell simulation results reveal that microwaves with a power of 2 GW and a frequency of 12.3 GHz are generated with an efficiency of 42% when the diode voltage is 400 kV, the beam current 12 kA, and the magnetic field 0.48 T.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Quasilinear model for energetic particle diffusion in radial and velocity space

A quasilinear model for passive energetic particle (EP) turbulent diffusion in radial and velocity space is fitted and tested against nonlinear gyrokinetic tokamak simulations with the GYRO code [J. Candy and R. E. Waltz, Phys. Rev. Lett. 91, 045001 (2003)]. Off diagonal elements of a symmetric positive definite 2 Multiplication-Sign 2 EP diffusion matrix account for fluxes up radial (energy) gradients driven by energy (radial) gradients of the EP velocity space distribution function. The quasilinear ratio kernel of the model is provided by a simple analytic formula for the EP radial and velocity space EP diffusivity relative to radial thermal ion energy diffusivity at each linear mode of the turbulence driven by the thermal plasma. The TGLF [G. M. Staebler, J. E. Kinsey, and R. E. Waltz, Phys. Plasmas 14, 0055909 (2007); ibid. 15, 0055908 (2008)] tokamak transport model provides the linear mode frequency and growth rates to the kernel as well as the nonlinear spectral weight for each mode.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Advances in target normal sheath acceleration theory

A theoretical model of the Target Normal Sheath Acceleration (TNSA) process, able to go beyond the limits of available descriptions, is developed. It allows to achieve a more satisfactory interpretation of TNSA. The theory, also supported by two dimensional particle-in-cell simulations, elucidates the role played by the main laser and target parameters. Comparison between model predictions and experimental data related to the target thickness dependence of the maximum ion energy is discussed, showing satisfactory agreement. The model can be used as a simple but effective tool to guide the design of future experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Power combination of a self-coherent high power microwave source

In our previous work, generating two phase-locked high power microwaves (HPMs) in a single self-coherent HPM device has been demonstrated. In this paper, after optimizing the structure of the previous self-coherent source, we design a power combiner with a folded phase-adjustment waveguide to realize power combination between its two sub-sources. Further particle-in-cell simulation of the combined source shows that when the diode voltage is 687 kV and the axial magnetic field is 0.8 T, a combined output microwave with 3.59 GW and 9.72 GHz is generated. The impedance of the combined device is 36 Ω and the total power conversion efficiency is 28%.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The appearance, motion, and disappearance of three-dimensional magnetic null points

While theoretical models and simulations of magnetic reconnection often assume symmetry such that the magnetic null point when present is co-located with a flow stagnation point, the introduction of asymmetry typically leads to non-ideal flows across the null point. To understand this behavior, we present exact expressions for the motion of three-dimensional linear null points. The most general expression shows that linear null points move in the direction along which the magnetic field and its time derivative are antiparallel. Null point motion in resistive magnetohydrodynamics results from advection by the bulk plasma flow and resistive diffusion of the magnetic field, which allows non-ideal flows across topological boundaries. Null point motion is described intrinsically by parameters evaluated locally; however, global dynamics help set the local conditions at the null point. During a bifurcation of a degenerate null point into a null-null pair or the reverse, the instantaneous velocity of separation or convergence of the null-null pair will typically be infinite along the null space of the Jacobian matrix of the magnetic field, but with finite components in the directions orthogonal to the null space. Not all bifurcating null-null pairs are connected by a separator. Furthermore, except under special circumstances, there will not exist a straight line separator connecting a bifurcating null-null pair. The motion of separators cannot be described using solely local parameters because the identification of a particular field line as a separator may change as a result of non-ideal behavior elsewhere along the field line.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Influence of background gas ionization on oscillations in a virtual cathode with a retarding potential

The effect of mobile ion background on the dynamics of a planar virtual cathode with retarding field is investigated. The ions appear in the diode gap due to ionization of a neutral gas by the electron beam. Detailed examination of the self-consistent processes of the virtual cathode dynamics, gas ionization, and ions motion is performed using the particle-in-cell simulation. It is shown that the presence of ions leads to the virtual cathode neutralization, its displacement, and subsequent anew formation. The microwave generation has the form of a sequence of pulse packets, whose duration depends on the value of the retarding potential and the kind of gas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Making a geometrically asymmetric capacitive rf discharge electrically symmetric

The electrical asymmetry effect in a spherical, geometrically asymmetric capacitive argon discharge driven by two consecutive harmonics is investigated using particle in cell simulations and analytical modeling. We find that the discharge asymmetry can be reduced electrically by tuning the phase shift between the driving frequencies, i.e., the absolute value of the dc self-bias voltage can be completely reduced and the mean ion energies at both electrodes can be adapted.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗