Search NASA⌕ Search

SEARCH · Search NASA

Results for “Reduced Defects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,657 records · Page 92

Adsorptive Films in Support of In-field UF6 Destructive Assay Sample Collection and Analysis

International Atom Energy Agency (IAEA) safeguard verification measures in gaseous centrifuge enrichment plants (GCEPs) rely on environmental sampling, non-destructive assay (NDA), and destructive assay (DA) sampling and analysis to determine uranium enrichment. UF6 bias defect measurements are made by DA sampling and analysis to assure that enrichment is consistent with declarations. DA samples are collected from a limited number of cylinders for high precision, offsite mass spectrometer analysis. Samples are typically drawn from a sampling tap into a UF6 sample bottle, then packaged, sealed, and shipped under IAEA chain of custody to an offsite analytical laboratory. Future DA safeguard measures may require improvements in efficiency and effectiveness as GCEP capacities increase and UF6 shipping regulations become increasingly more restrictive. The Pacific Northwest National Laboratory (PNNL) DA sampler concept and Laser Ablation Absorption Ratio Spectrometry (LAARS) assay method are under development to potentially provide DA safeguard tools that increase inspection effectiveness and reduce sample shipping constraints. The PNNL DA sampler concept uses a handheld sampler to collect DA samples for either onsite LAARS assay or offsite laboratory analysis. The DA sampler design will use a small sampling planchet that is coated with an adsorptive film to collect controlled quantities of UF6 gas directly from a cylinder or process sampling tap. Development efforts are currently underway at PNNL to enhance LAARS assay performance to allow high-precision onsite bias defect measurements. In this paper, we report on the experimental investigation to develop adsorptive films for the PNNL DA sampler concept. These films are intended to efficiently capture UF6 and then stabilize the collected DA sample prior to onsite LAARS or offsite laboratory analysis. Several porous material composite films were investigated, including a film designed to maximize the chemical adsorption and binding of gaseous UF6 onto the sampling planchet.

destructive assay↗

Critical Assessment of the Thermodynamics of Vacancy Formation in Fe 2 O 3 Using Hybrid Density Functional Theory

Fe 2 O 3 hematite is a technologically important material with applications in energy storage as well as being the key phase formed in the rust of iron-based materials. Despite this central importance, there is much that is still unknown regarding the properties of defects in Fe 2 O 3 and consequently oxide growth. In this work, using screened hybrid density functional theory (HSE06), we consider the thermodynamics of vacancies in Fe 2 O 3 , considering the effects of ionic and electronic chemical potentials on both iron and oxygen vacancy formation. We find that, in the oxygen-rich limit, iron vacancies are easier to form, though the difference in formation energy between the two vacancies is only about 1 eV. In contrast, in the Fe-rich limit, oxygen vacancies have an extremely low formation energy, only 0.07 eV at mid-gap, and would spontaneously form as the Fermi level is reduced, while Fe vacancies require over 5 eV to form. Consistent with experiment, this indicates that Fe 2 O 3 is relatively easily reduced but not oxidized. However, the theoretical picture is very different when considering other exchange–correlation functionals (GGA + U or SCAN), emphasizing the critical role of the exchange–correlation functional in describing this system accurately.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Simulating noise on a quantum processor: interactions between a qubit and resonant two-level system bath

Material defects fundamentally limit the coherence times of superconducting qubits, and manufacturing completely defect-free devices is not yet possible. Therefore, understanding the interactions between defects and a qubit in a real quantum processor design is essential. We build a model that incorporates the standard tunneling model, the electric field distributions in the qubit, and open quantum system dynamics, and draws from the current understanding of two-level system (TLS) theory. Specifically, we start with one million TLSs distributed on the surface of a qubit and pick the 200 systems that are most strongly coupled to the qubit. We then perform a full Lindbladian simulation that explicitly includes the coherent coupling between the qubit and the TLS bath to model the time dependent density matrix of resonant TLS defects and the qubit. We find that the 200 most strongly coupled TLSs can accurately describe the qubit energy relaxation time. This work confirms that resonant TLSs located in areas where the electric field is strong can significantly affect the qubit relaxation time, even if they are located far from the Josephson junction (JJ). Similarly, a strongly-coupled resonant TLS located in the JJ does not guarantee a reduced qubit relaxation time if a more strongly coupled TLS is far from the JJ. In addition to the coupling strengths between TLSs and the qubit, the model predicts that the geometry of the device and the TLS relaxation time play a significant role in qubit dynamics. Our work can provide guidance for future quantum processor designs with improved qubit coherence times.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Superlattice photonic crystal as broadband solar absorber for high temperature operation

Here, a high performance solar absorber using a 2D tantalum superlattice photonic crystal (PhC) is proposed and its design is optimized for high-temperature energy conversion. In contrast to the simple lattice PhC, which is limited by diffraction in the short wavelength range, the superlattice PhC achieves solar absorption over broadband spectral range due to the contribution from two superposed lattices with different cavity radii. The superlattice PhC geometry is tailored to achieve maximum thermal transfer efficiency for a low concentration system of 250 suns at 1500 K reaching 85.0% solar absorptivity. In the high concentration case of 1000 suns, the superlattice PhC absorber achieves a solar absorptivity of 96.2% and a thermal transfer efficiency of 82.9% at 1500 K, amounting to an improvement of 10% and 5%, respectively, versus the simple square lattice PhC absorber. In addition, the performance of the superlattice PhC absorber is studied in a solar thermophotovoltaic system which is optimized to minimize absorber re-emission by reducing the absorber-to-emitter area ratio and using a highly reflective silver aperture.

14 SOLAR ENERGY↗

First-Principles Calculations, Electrochemical and X-ray Absorption Studies of Li-Ni-PO4 Surface-Treated xLi2MnO3 (1 x)LiMO2 (M = Mn, Ni, Co) Electrodes for Li-Ion Batteries

It has been previously hypothesized that the enhanced rate capability of Li-Ni-PO{sub 4}-treated xLi{sub 2}MnO{sub 3} {center_dot} (1-x)LiMO{sub 2} positive electrodes (M = Mn, Ni, Co) in Li-ion batteries might be associated with a defect Ni-doped Li{sub 3}PO{sub 4} surface structure [i.e., Li{sub 3-2y}Ni{sub y}PO{sub 4} (0 < y < 1)], thereby promoting fast Li{sup +}-ion conduction at the xLi{sub 2}MnO{sub 3} {center_dot} (1-x)LiMO{sub 2} particle surface. In this paper, the solubility of divalent metals (Fe, Mn, Ni, Mg) in {gamma}-Li{sub 3}PO{sub 4} is predicted with the first-principles GGA+U method in an effort to understand the enhanced rate capability. The predicted solubility (x) is extremely small; this finding is consistent with experimental evidence: 1) X-ray diffraction data obtained from Li-Ni-PO{sub 4}-treated xLi{sub 2}MnO{sub 3} {center_dot} (1-x)LiMO{sub 2} electrodes that show that, after annealing at 550 C, a Li{sub 3}PO{sub 4}-like structure forms as a second phase at the electrode particle surface, and 2) X-ray absorption spectroscopy, which indicate that the nickel ions are accommodated in the transition metal layers of the Li{sub 2}MnO{sub 3} component during the annealing process. However, electrochemical studies of Li{sub 3-2y}Ni{sub y}PO{sub 4}-treated xLi{sub 2}MnO{sub 3} {center_dot} (1-x)LiMO{sub 2} electrodes indicate that their rate capability increases as a function of y over the range y = 0 (Li{sub 3}PO{sub 4}) to y = 1 (LiNiPO{sub 4}), strongly suggesting that, at some level, the nickel ions play a role in reducing electrochemical impedance and increasing electrode stability at the electrode particle surface.

25 ENERGY STORAGE↗

The effect of Cr alloying on defect migration at Ni grain boundaries

Mass transport along grain boundaries in alloys depends not only on the atomic structure of the boundary, but also its chemical make-up. In this work, we use molecular dynamics to examine the effect of Cr alloying on interstitial and vacancy-mediated transport at a variety of grain boundaries in Ni. We find that, in general, Cr tends to reduce the rate of mass transport, an effect which is greatest for interstitials at pure tilt boundaries. However, there are special scenarios in which it can greatly enhance atomic mobility. Cr tends to migrate faster than Ni, though again this depends on the structure of the grain boundary. Further, grain boundary mobility, which is sometimes pronounced for pure Ni grain boundaries, is eliminated on the time scales of our simulations when Cr is present. We conclude that the enhanced transport and grain boundary mobility often seen in this system in experimental studies is the result of non-equilibrium effects and is not intrinsic to the alloyed grain boundary. These results provide new insight into the role of grain boundary alloying on transport that can help in the interpretation of experimental results and the development of predictive models of materials evolution.

36 MATERIALS SCIENCE↗

Grain boundary effects on defect production and mechanical properties of irradiated nanocrystalline SiC

Grain boundaries (GBs) are known to play an important role in determining the mechanical and functional properties of nanocrystalline materials. In this study, we used molecular dynamics simulations to investigate the effects of damaged GBs on the mechanical properties of SiC that is irradiated by 10 keV Si atoms. The results reveal that irradiation promotes GB sliding and reduces the ability of GBs to block dislocations, which improves the deformation ability of nanocrystalline SiC. However, irradiation causes local rearrangements in disordered clusters and pinning of dislocations in the grain region, which restrains its deformation. These two mechanisms arise from the irradiation effects on GBs and grains, and these mechanisms compete in nanocrystalline SiC during irradiation. The irradiation effects on GBs dominate at low irradiation doses, and the effects on grains dominate at high doses; the result of these combined effects is a peak ductility of 0.09 dpa in nanocrystalline SiC.

36 MATERIALS SCIENCE↗

Enhanced electrochemical etching of ion irradiated silicon by localized amorphization

A tailored distribution of ion induced defects in p-type silicon allows subsequent electrochemical anodization to be modified in various ways. Here we describe how a low level of lattice amorphization induced by ion irradiation influences anodization. First, it superposes a chemical etching effect, which is observable at high fluences as a reduced height of a micromachined component. Second, at lower fluences, it greatly enhances electrochemical anodization by allowing a hole diffusion current to flow to the exposed surface. We present an anodization model, which explains all observed effects produced by light ions such as helium and heavy ions such as cesium over a wide range of fluences and irradiation geometries.

36 MATERIALS SCIENCE↗

Transient terahertz photoconductivity measurements of minority-carrier lifetime in tin sulfide thin films: Advanced metrology for an early stage photovoltaic material

Materials research with a focus on enhancing the minority-carrier lifetime of the light-absorbing semiconductor is crucial to advancing solar energy technology for both early stage and mature material platforms alike. Tin sulfide (SnS) is an absorber material with several clear advantages for manufacturing and deployment, but the record power conversion efficiency remains below 5%. We report measurements of bulk and interface minority-carrier recombination rates in SnS thin films using optical-pump, terahertz-probe transient photoconductivity (TPC) measurements. Post-growth thermal annealing in H 2 S gas increases the minority-carrier lifetime, and oxidation of the surface reduces the surface recombination velocity. However, the minority-carrier lifetime remains below 100 ps for all tested combinations of growth technique and post-growth processing. Vast improvement in SnS solar cell performance will hinge on finding and mitigating as-yet-unknown recombination-active defects. We describe in detail our methodology for TPC experiments, and we share our data analysis routines in the form freely available software.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Towards a III-V Solar Cell with a Metamorphic Graded Buffer Directly Grown on V-Groove Si Substrates

V-groove Si substrates offer a promising route for the direct growth of III-V solar cells on low-cost, photovoltaic-grade Si. In this work, we develop a method for coalescing GaP nucleated on V-groove substrates into thin films suitable for the growth of III-V solar cells. We demonstrate the ability to suppress nucleation-related defects by modifying the V-groove substrate to cover the (0 0 1)-oriented Si V-groove tops with SiN x . A threading dislocation density (TDD) of 5 × 10 7 cm -2 was measured with electron channeling contrast imaging. Continuing work will focus on further reducing the TDD and the growth of a GaAs solar cell on a GaP on V-groove Si template.

41 EE - Solar Energy Technologies Office (EE-4S)↗

Ultrasonic imaging in liquid sodium

The fourth generation of nuclear reactor can use liquid sodium as the core coolant. When the reactor is operating, sodium temperatures can reach up to 600 deg. C. During maintenance periods, when the reactor is shut down, the coolant temperature is reduced to 200 deg. C. Because molten sodium is optically opaque, ultrasonic imaging techniques are developed for maintenance activities. Under-sodium imaging aims at i) checking the health of immersed structures. It should also allow ii) to assess component degradation or damage as cracks and shape defects as well as iii) the detection of lost objects. The under-sodium imaging system has to sustain high temperature (up to 300 deg. C) and hostility of the sodium environment. Furthermore, specific constraints such as transducers characteristics or the limited sensor mobility in the reactor vessel have to be considered. This work focuses on developing a methodology for detecting damages such as crack defects with ultrasound devices. Surface-breaking cracks or deep cracks are sought in the weld area, as welds are more subject to defects. Traditional methods enabled us to detect emerging cracks of submillimeter size with sodium-compatible high-temperature transducer. The presented approach relies on making use of prior knowledge about the environment through the implementation of differential imaging and time-reversal techniques. Indeed, this approach allows to detect a change by comparison with a reference measurement and by focusing back to any change in the environment. It is a means of analysis and understanding of the physical phenomena making it possible to design more effective inspection strategies. Difference between the measured signals reveals the acoustic field scattered by a perturbation (a crack for instance), which may occur between periodical measurements. The imaging method relies on the adequate combination of two computed ultrasonic fields, one forward and one adjoint. The adjoint field, which carries the information about the defects, is analogous to a time-reversal operation. One of the interests of the presented method is that the time-reversal operation is not done experimentally but numerically. Numerical simulations have been carried out to validate the practical relevance of this approach. The preliminary numerical results show a nice agreement between the guessed and the actual positions of the defect. After water-tests, in sodium-tests must be done in order to validate the water/sodium transposition. For this purpose, an under-sodium device is under development, which can move the transducers with four degrees of freedom in a 1.5 m{sup 3} sodium pot. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Surface Structure Dependence of SO 2 Interaction with Ceria Nanocrystals with Well-defined Surface Facets

The effects of the surface structure of ceria (CeO 2 ) on the nature, strength, and amount of species resulting from SO 2 adsorption were studied using in situ IR and Raman spectroscopies coupled with mass spectrometry, along with first-principles calculations based on density functional theory (DFT). CeO 2 nanocrystals with different morphologies, namely, rods (representing a defective structure), cubes (100 facet), and octahedra (111 facet), were used to represent different CeO 2 surface structures. IR and Raman spectroscopic studies showed that the structure and binding strength of adsorbed species from SO 2 depend on the shape of the CeO 2 nanocrystals. SO 2 adsorbs mainly as surface sulfites and sulfates at room temperature on CeO 2 rods, cubes, and octahedra that were either oxidatively or reductively pretreated. The formation of sulfites is more evident on CeO 2 octahedra, whereas surface sulfates are more prominent on CeO 2 rods and cubes. This is explained by the increasing reducibility of the surface oxygen in the order octahedra < cubes < rods. Bulk sulfites are also formed during SO 2 adsorption on reduced CeO 2 rods. The formation of surface sulfites and sulfates on CeO 2 cubes is in good agreement with our DFT results of SO 2 interactions with the CeO 2 (100) surface. CeO 2 rods desorb SO2 at higher temperatures than cubes and octahedra nanocrystals, but bulk sulfates are formed on CeO 2 rods and cubes after high-temperature desorption whereas only some surface sulfates/sulfites are left on octahedra. This difference is rationalized by the fact that CeO 2 rods have the highest surface basicity and largest amount of defects among the three nanocrystals, so they bind and react with SO 2 strongly and are the most degraded after SO 2 adsorption cycles. The fundamental understanding obtained in this work on the effects of the surface structure and defects on the interaction of SO 2 with CeO 2 provides insights for the design of more sulfur-resistant CeO 2 -based catalysts.

36 MATERIALS SCIENCE↗

Approach and rotation of reconnecting topological defect lines in liquid crystal

Topological defects are a universal concept across many disciplines, such as crystallography, liquid-crystalline physics, low-temperature physics, cosmology, and even biology. In nematic liquid crystals, topological defects called disclinations have been widely studied. For their three-dimensional (3D) dynamics, however, only recently have theoretical approaches dealing with fully 3D configurations been reported. Further, recent experiments have observed 3D disclination line reconnections, a phenomenon characteristic of defect line dynamics, but detailed discussions were limited to the case of approximately parallel defects. In this paper, we focus on the case of two disclination lines that approach at finite angles and lie in separate planes, a more fundamentally 3D reconnection configuration. Observing and analyzing such reconnection events, we find the square-root law of the distance between disclinations and the decrease of the interdisclination angle over time. We compare the experimental results with theory and find qualitative agreement on the scaling of distance and angle with time, but quantitative disagreement on distance and angle relative mobilities. To probe this disagreement, we derive the equations of motion for systems with reduced twist constant and also carry out simulations for this case. These, together with the experimental results, suggest that deformations of disclinations may be responsible for the disagreement. Published by the American Physical Society 2024

36 MATERIALS SCIENCE↗

Establishing an acoustic-property relationship in laser powder bed fusion with machine learning

Quality control of Laser Powder Bed Fusion (PBF-LB) additively manufactured parts is an important hurdle inhibiting the technology’s use structural applications. Acoustic monitoring of the laser powder bed fusion process can detect defects in-situ that are known to degrade mechanical properties. However, processing-structure-property (PSP) relationships are required to extrapolate from detected defects to part performance. Here, this study explores how acoustics may be a suitable signature linking processing conditions to properties, thus effectively substituting for structure in the PSP relationship. Establishing such a relationship would enable a part’s mechanical performance to be directly predicted from its acoustic signature, reducing the need for destructive testing or microstructural analysis to ensure a part will meet performance requirements. One hundred CoCrFeMnNi high entropy alloy tensile bars were printed across 13 process conditions in a series of 6 prints. The acoustic signatures of these tensile bars were used to train machine learning models to predict each part’s mechanical properties. By using both process information and acoustic information to predict mechanical properties, yield strength was predicted 18% more accurately and ductility to failure was predicted 10% more accurately than is achieved when using duplicate parts to predict part performance. Finally, individual acoustic frequencies were investigated to determine why acoustic signatures improve mechanical property predictions and the potential physical origins of these signatures. This work demonstrates how blending acoustics, process information, and machine learning can provide in-situ diagnostics of mechanical properties and improve the reliability of the PBF-LB process.

Acoustic emission↗

Pectin methyltransferase QUASIMODO2 functions in the formation of seed coat mucilage in Arabidopsis

Pectin, cellulose, and hemicelluloses are major components of primary cell walls in plants. In addition to cell adhesion and expansion, pectin plays a central role in seed mucilage. Seed mucilage contains abundant pectic rhamnogalacturonan-I (RG-I) and lower amounts of homogalacturonan (HG), cellulose, and hemicelluloses. Previously, accumulated evidence has addressed the role of pectin RG-I in mucilage production and adherence. However, less is known about the function of pectin HG in seed coat mucilage formation. In this study, we analyzed a novel mutant, designated things fall apart2 (tfa2), which contains a mutation in HG methyltransferase QUASIMODO2 (QUA2). Etiolated tfa2 seedlings display short hypocotyls and adhesion defects similar to qua2 and tumorous shoot development2 (tsd2) alleles, and show seed mucilage defects. Here, the diminished uronic acid content and methylesterification degree of HG in mutant seed mucilage indicate the role of HG in the formation of seed mucilage. Cellulosic rays in mutant mucilage are collapsed. The epidermal cells of seed coat in tfa2 and tsd2 display deformed columellae and reduced radial wall thickness. Under polyethylene glycol treatment, seeds from these three mutant alleles exhibit reduced germination rates. Together, these data emphasize the requirement of pectic HG biosynthesis for the synthesis of seed mucilage, and the functions of different pectin domains together with cellulose in regulating its formation, expansion, and release.

59 BASIC BIOLOGICAL SCIENCES↗

Utilization of native oxygen in Eu(RE)-doped GaN for enabling device compatibility in optoelectronic applications

The detrimental influence of oxygen on the performance and reliability of V/III nitride based devices is well known. However, the influence of oxygen on the nature of the incorporation of other co-dopants, such as rare earth ions, has been largely overlooked in GaN. Here, we report the first comprehensive study of the critical role that oxygen has on Eu in GaN, as well as atomic scale observation of diffusion and local concentration of both atoms in the crystal lattice. We find that oxygen plays an integral role in the location, stability, and local defect structure around the Eu ions that were doped into the GaN host. Although the availability of oxygen is essential for these properties, it renders the material incompatible with GaN-based devices. However, the utilization of the normally occurring oxygen in GaN is promoted through structural manipulation, reducing its concentration by 2 orders of magnitude, while maintaining both the material quality and the favorable optical properties of the Eu ions. Furthermore, these findings open the way for full integration of RE dopants for optoelectronic functionalities in the existing GaN platform.

36 MATERIALS SCIENCE↗

ULTRASONIC MEASUREMENT MODELS FOR SURFACE WAVE AND PLATE WAVE INSPECTIONS

A complete ultrasonic measurement model for surface and plate wave inspections is obtained, where all the electrical, electromechanical, and acoustic/elastic elements are explicitly described. Reciprocity principles are used to describe the acoustic/elastic elements specifically in terms of an integral of the incident and scattered wave fields over the surface of the flaw. As with the case of bulk waves, if one assumes the incident surface waves or plate waves are locally planar at the flaw surface, the overall measurement model reduces to a very modular form where the far-field scattering amplitude of the flaw appears explicitly.

36 MATERIALS SCIENCE↗