Search NASA⌕ Search

SEARCH · Search NASA

Results for “Solar Dynamic”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,657 records · Page 92

HST/COS OBSERVATIONS OF GALACTIC HIGH-VELOCITY CLOUDS: FOUR ACTIVE GALACTIC NUCLEUS SIGHT LINES THROUGH COMPLEX C

We report ultraviolet spectra of Galactic high-velocity clouds (HVCs) in Complex C, taken by the Cosmic Origins Spectrograph (COS) on the Hubble Space Telescope (HST), together with new 21 cm spectra from the Green Bank Telescope. The wide spectral coverage and higher signal-to-noise ratio, compared to previous HST spectra, provide better velocity definition of the HVC absorption, additional ionization species (including high ions), and improved abundances in this halo gas. Complex C has a metallicity of 10%-30% solar and a wide range of ions, suggesting dynamical and thermal interactions with hot gas in the Galactic halo. Spectra in the COS medium-resolution G130M (1133-1468 A) and G160M (1383-1796 A) gratings detect ultraviolet absorption lines from eight elements in low-ionization states (O I, N I, C II, S II, Si II, Al II, Fe II, P II) and three elements in intermediate- and high-ionization states (Si III, Si IV, C IV, N V). Our four active galactic nucleus sight lines toward Mrk 817, Mrk 290, Mrk 876, and PG 1259+593 have high-velocity H I and O VI column densities, log N{sub Hi}= 19.39-20.05 and log N{sub Ovi}= 13.58-14.10, with substantial amounts of kinematically associated photoionized gas. The high-ion abundance ratios are consistent with cooling interfaces between photoionized and collisionally ionized gas: N(C IV)/N(O VI) {approx} 0.3-0.5, N(Si IV)/N(O VI) {approx} 0.05-0.11, N(N V)/N(O VI) {approx} 0.07-0.13, and N(Si IV)/N(Si III) {approx}0.2.

79 ASTRONOMY AND ASTROPHYSICS↗

Transient shocks beyond the heliopause

The heliopause is a rich, dynamic surface affected by the time-dependent solar wind. Stream interactions due to coronal mass ejections (CMEs), corotating interaction regions (CIRs), and other transient phenomena are known to merge producing global merged interaction regions (GMIRs). Numerical simulations of the solar wind interaction with the local interstellar medium (LISM) show that GMIRs, as well other time-dependent structures in the solar wind, may produce compression/rarefaction waves and shocks in the LISM behind the heliopause. These shocks may initiate wave activity observed by the Voyager spacecraft. The magnetometer onboard Voyager 1 indeed observed a few structures that may be interpreted as shocks. We present numerical simulations of such shocks in the year of 2000, when both Voyager spacecraft were in the supersonic solar wind region, and in 2012, when Voyager 1 observed traveling shocks. In the former case, Voyager observations themselves provide time- dependent boundary conditions in the solar wind. In the latter case, we use OMNI data at 1 AU to analyze the plasma and magnetic field behavior after Voyager 1 crossed the heliospheric boundary. Numerical results are compared with spacecraft observations.

79 ASTRONOMY AND ASTROPHYSICS↗

UBIQUITOUS TORSIONAL MOTIONS IN TYPE II SPICULES

Spicules are long, thin, highly dynamic features that jut out ubiquitously from the solar limb. They dominate the interface between the chromosphere and corona and may provide significant mass and energy to the corona. We use high-quality observations with the Swedish 1 m Solar Telescope to establish that so-called type II spicules are characterized by the simultaneous action of three different types of motion: (1) field-aligned flows of order 50-100 km s{sup -1}, (2) swaying motions of order 15-20 km s{sup -1}, and (3) torsional motions of order 25-30 km s{sup -1}. The first two modes have been studied in detail before, but not the torsional motions. Our analysis of many near-limb and off-limb spectra and narrowband images using multiple spectral lines yields strong evidence that most, if not all, type II spicules undergo large torsional modulation and that these motions, like spicule swaying, represent Alfvenic waves propagating outward at several hundred km s{sup -1}. The combined action of the different motions explains the similar morphology of spicule bushes in the outer red and blue wings of chromospheric lines, and needs to be taken into account when interpreting Doppler motions to derive estimates for field-aligned flows in spicules and determining the Alfvenic wave energy in the solar atmosphere. Our results also suggest that large torsional motion is an ingredient in the production of type II spicules and that spicules play an important role in the transport of helicity through the solar atmosphere.

79 ASTRONOMY AND ASTROPHYSICS↗

The kinematic properties of Milky Way stellar halo populations

ABSTRACT In the Gaia era, stellar kinematics are extensively used to study Galactic halo stellar populations, to search for halo structures, and to characterize the interface between the halo and hot disc populations. We use distribution function-based models of modern data sets with 6D phase space data to qualitatively describe a variety of kinematic spaces commonly used in the study of the Galactic halo. Furthermore, we quantitatively assess how well each kinematic space can separate radially anisotropic from isotropic halo populations. We find that scaled action space (the ‘action diamond’) is superior to other commonly used kinematic spaces at this task. We present a new, easy to implement selection criterion for members of the radially anisotropic Gaia–Enceladus merger remnant. Assuming a 1:1 ratio of Gaia–Enceladus stars to more isotropic halo, we find our selection achieves a sample purity of 86 per cent in our models with respect to contamination from the more isotropic halo. We compare this criterion to literature criteria, finding that it produces the highest purity in the resulting samples, at the expense of a modest reduction in completeness. We also show that selection biases that underlie nearly all contemporary spectroscopic data sets can noticeably impact the E−Lz distribution of samples in a manner that may be confused for real substructure. We conclude by providing recommendations for how authors should use stellar kinematics in the future to study the Galactic stellar halo.

79 ASTRONOMY AND ASTROPHYSICS↗

Nearby stellar substructures in the Galactic halo from DESI Milky Way Survey Year 1 Data Release

We report five nearby ($d_{\mathrm{helio}} < 5$ kpc) stellar substructures in the Galactic halo from a subset of 138 661 stars in the Dark Energy Spectroscopic Instrument (DESI) Milky Way Survey Year 1 Data Release. With an unsupervised clustering algorithm, HDBSCAN*, these substructures are independently identified in Integrals of Motion ($E_{\rm tot}$, $L_{\rm z}$, $\log {J_r}$, $\log {J_z}$) space and Galactocentric cylindrical velocity space ($V_{R}$, $V_{\phi }$, $V_{z}$). We associate all identified clusters with known nearby substructures (Helmi streams, M18-Cand10/MMH-1, Sequoia, Antaeus, and ED-2) previously reported in various studies. With metallicities precisely measured by DESI, we confirm that the Helmi streams, M18-Cand10, and ED-2 are chemically distinct from local halo stars. We have characterized the chemodynamic properties of each dynamic group, including their metallicity dispersions, to associate them with their progenitor types (globular cluster or dwarf galaxy). Our approach for searching substructures with HDBSCAN* reliably detects real substructures in the Galactic halo, suggesting that applying the same method can lead to the discovery of new substructures in future DESI data. With more stars from future DESI data releases and improved astrometry from the upcoming Gaia Data Release 4, we will have a more detailed blueprint of the Galactic halo, offering a significant improvement in our understanding of the formation and evolutionary history of the Milky Way Galaxy.

dynamics↗

Computational analysis of a pipe flow distributor for a thermocline based thermal energy storage system

In this paper, the overall efficiency of a concentrating solar power (CSP) plant depends on the effectiveness of thermal energy storage (TES) system. A single tank TES system consists of a thermocline region which produces the temperature gradient between hot and cold storage fluid by density difference. Preservation of this thermocline region in the tank during charging and discharging cycles depends on the uniformity of the velocity profile at any horizontal plane. Our objective is to maximize the uniformity of the velocity distribution using a pipe-network distributor by varying the number of holes, distance between the holes, position of the holes and number of distributor pipes. For simplicity, we consider that the diameter of the inlet, main pipe, the distributor pipes and the height and the width of the tank are constant. We use Hitec ® molten salt as the storage medium and the commercial software Gambit 2.4.6 and Fluent 6.3 for the computational analysis. We analyze the standard deviation in the velocity field and compare the deviations at different positions of the tank height for different configurations. Since the distance of the holes from the inlet and their respective arrangements affects the flow distribution throughout the tank; we investigate the impacts of rearranging the holes position on flow distribution. Impact of the number of holes and distributor pipes are also analyzed. We analyze our findings to determine a configuration for the best case scenario.

14 SOLAR ENERGY↗

On-Sun Performance Evaluation of Alternative High-Temperature Falling Particle Receiver Designs

This paper evaluates the on-sun performance of a 1 MW falling particle receiver. Two particle receiver designs were investigated: obstructed flow particle receiver versus free-falling particle receiver. The intent of the tests was to investigate the impact of particle mass flow rate, irradiance, and particle temperature on the particle temperature rise and thermal efficiency of the receiver for each design. Results indicate that the obstructed flow design increased the residence time of the particles in the concentrated flux, thereby increasing the particle temperature and thermal efficiency for a given mass flow rate. Here, the obstructions, a staggered array of chevron-shaped mesh structures, also provided more stability to the falling particles, which were prone to instabilities caused by convective currents in the free-fall design. Challenges encountered during the tests included nonuniform mass flow rates, wind impacts, and oxidation/deterioration of the mesh structures. Alternative materials, designs, and methods are presented to overcome these challenges.

14 SOLAR ENERGY↗

APPLICATION OF GAS DYNAMICAL FRICTION FOR PLANETESIMALS. II. EVOLUTION OF BINARY PLANETESIMALS

One of the first stages of planet formation is the growth of small planetesimals and their accumulation into large planetesimals and planetary embryos. This early stage occurs long before the dispersal of most of the gas from the protoplanetary disk. At this stage gas–planetesimal interactions play a key role in the dynamical evolution of single intermediate-mass planetesimals (m{sub p} ∼ 10{sup 21}–10{sup 25} g) through gas dynamical friction (GDF). A significant fraction of all solar system planetesimals (asteroids and Kuiper-belt objects) are known to be binary planetesimals (BPs). Here, we explore the effects of GDF on the evolution of BPs embedded in a gaseous disk using an N-body code with a fiducial external force accounting for GDF. We find that GDF can induce binary mergers on timescales shorter than the disk lifetime for masses above m{sub p} ≳ 10{sup 22} g at 1 au, independent of the binary initial separation and eccentricity. Such mergers can affect the structure of merger-formed planetesimals, and the GDF-induced binary inspiral can play a role in the evolution of the planetesimal disk. In addition, binaries on eccentric orbits around the star may evolve in the supersonic regime, where the torque reverses and the binary expands, which would enhance the cross section for planetesimal encounters with the binary. Highly inclined binaries with small mass ratios, evolve due to the combined effects of Kozai–Lidov (KL) cycles with GDF which lead to chaotic evolution. Prograde binaries go through semi-regular KL evolution, while retrograde binaries frequently flip their inclination and ∼50% of them are destroyed.

79 ASTRONOMY AND ASTROPHYSICS↗

PLASMA ENVIRONMENT AROUND COMET 67P/CHURYUMOV–GERASIMENKO AT PERIHELION: MODEL COMPARISON WITH ROSETTA DATA

The plasma environment near comet 67P/Churyumov–Gerasimenko (67P/CG) is dynamically affected by various factors, including the incident solar wind and outgassing from the nucleus. The Rosetta spacecraft MAGnetometer (MAG) instrument observations near perihelion showed crossing events into a magnetic field-free region at about 170 km from the nucleus in 2015 July at 1.26 au from the Sun. At each crossing, the magnitude of the magnetic field dropped by more than 20 nT to near zero. We compared the Ion and Electron Sensor (IES) electron differential flux energy spectrum inside and outside the crossing boundaries. The IES observations show a modest but consistent drop in electron flux for energies between 40 eV and a few hundred eV at each cavity crossing event. This drop in the electron spectra might be due to the absence or attenuation of solar wind electrons inside the observed diamagnetic regions, which might or might not be a diamagnetic cavity. There is no apparent simple linear correlation between the electron count rate measured by the IES at different energies and the magnitude of the magnetic field, however; at all energies, the highest electron count rates are recorded at the highest magnetic field magnitudes. From model-data comparisons it seems that inside diamagnetic regions, pure coma photoelectrons are not sufficient to explain the observations and that a trapping mechanism and/or infused solar wind electrons are necessary to explain the observed electron fluxes.

79 ASTRONOMY AND ASTROPHYSICS↗

3D Lifetime Tomography Reveals How CdCl 2 Improves Recombination Throughout CdTe Solar Cells

When using two-photon tomography, carrier lifetimes are mapped in polycrystalline CdTe photovoltaic devices. These 3D maps probe subsurface carrier dynamics that are inaccessible with traditional optical techniques. They reveal that CdCl 2 treatment of CdTe solar cells suppresses nonradiative recombination and enhances carrier lifetimes throughout the film with substantial improvements particularly near subsurface grain boundaries and the critical buried p-n junction.

14 SOLAR ENERGY↗

Hα LINE PROFILE ASYMMETRIES AND THE CHROMOSPHERIC FLARE VELOCITY FIELD

The asymmetries observed in the line profiles of solar flares can provide important diagnostics of the properties and dynamics of the flaring atmosphere. In this paper the evolution of the Hα and Ca ii λ8542 lines are studied using high spatial, temporal, and spectral resolution ground-based observations of an M1.1 flare obtained with the Swedish 1 m Solar Telescope. The temporal evolution of the Hα line profiles from the flare kernel shows excess emission in the red wing (red asymmetry) before flare maximum and excess in the blue wing (blue asymmetry) after maximum. However, the Ca ii λ8542 line does not follow the same pattern, showing only a weak red asymmetry during the flare. RADYN simulations are used to synthesize spectral line profiles for the flaring atmosphere, and good agreement is found with the observations. We show that the red asymmetry observed in Hα is not necessarily associated with plasma downflows, and the blue asymmetry may not be related to plasma upflows. Indeed, we conclude that the steep velocity gradients in the flaring chromosphere modify the wavelength of the central reversal in the Hα line profile. The shift in the wavelength of maximum opacity to shorter and longer wavelengths generates the red and blue asymmetries, respectively.

79 ASTRONOMY AND ASTROPHYSICS↗

Enhancement and Tunability of Near-Field Radiative Heat Transfer Mediated by Surface Plasmon Polaritons in Thin Plasmonic Films

The properties of thermal radiation exchange between hot and cold objects can be strongly modified if they interact in the near field where electromagnetic coupling occurs across gaps narrower than the dominant wavelength of thermal radiation. Using a rigorous fluctuational electrodynamics approach, we predict that ultra-thin films of plasmonic materials can be used to dramatically enhance near-field heat transfer. The total spectrally integrated film-to-film heat transfer is over an order of magnitude larger than between the same materials in bulk form and also exceeds the levels achievable with polar dielectrics such as SiC. We attribute this enhancement to the significant spectral broadening of radiative heat transfer due to coupling between surface plasmon polaritons (SPPs) on both sides of each thin film. We show that the radiative heat flux spectrum can be further shaped by the choice of the substrate onto which the thin film is deposited. In particular, substrates supporting surface phonon polaritons (SPhP) strongly modify the heat flux spectrum owing to the interactions between SPPs on thin films and SPhPs of the substrate. The use of thin film phase change materials on polar dielectric substrates allows for dynamic switching of the heat flux spectrum between SPP-mediated and SPhP-mediated peaks

42 ENGINEERING↗

Balancing moisture and oxygen can match the crystallization dynamics of inert halide perovskite processing

Understanding crystallization in ambient environments is essential for scaling the fabrication of halide perovskite solar cells. Antisolvent-free perovskite deposition offers improved compatibility with high-throughput processing but introduces distinct crystallization dynamics relative to the more ubiquitous use of antisolvents in lab-scale perovskite fabrication. These dynamics are driven by interactions between solutes, solvent and the deposition environment. Using in situ wide-angle X-ray scattering during spin-coating and annealing, we demonstrate how relative humidity (RH) and oxygen, can be tuned to drive polytype evolution during ambient crystallization of formamidinium lead iodide to match that of inert synthesis and achieve comparable film and device quality. In an inert (N 2 ) environment, we find that perovskite films follow a well-established 2H → 3C phase transformation with a short period of coexistence of the 4H and 6H phase during heating. During crystallization in dry air (RH 0%), the added presence of oxygen leads to the dominance of 4H intermediate for an extended duration, establishing a 2H → 4H → 3C pathway. Introducing low humidity (RH 10%) suppresses the 4H phase to a short-lived intermediate above 100 °C, facilitating a more direct transition to the desired 3C phase and almost replicating the crystallization behavior observed under inert conditions. Interestingly, films crystallized under RH 10% show a lower onset temperature for the perovskite 3C phase than under N 2 . At higher humidity (RH 40%), the strong interaction of oxygen and moisture with iodoplumbates appears to stabilize higher order polytypes (4H and 6H). Devices fabricated under RH 10% achieve higher efficiency and enhanced stability compared to those produced under inert atmosphere. These findings provide mechanistic insight into crystallization pathways in different environments and provide a framework to transfer processes from inert to ambient conditions. The results highlight the critical role of controlled humidity in tuning antisolvent-free perovskite crystallization for scalable processing.

Hossain, Maimur [Univ. of California, San Diego, C↗

National Solar Jobs Accelerator (Final Technical Report (FTR))

The aptitudes and experiences gained through military service—such as dynamic leadership, teamwork and critical thinking skills, technical specialization, and a mission-completion work ethic—make veterans exceptional candidates for a wide range of solar energy careers. The solar industry offers a highly collaborative and purpose-driven work environment that resonates with service members and veterans looking to rise to their next challenge, and solar employers are eager to tap into this valuable talent pool. From October 2019 - February 2023, The National Solar Jobs Accelerator (publicly the Solar Ready Vets Network TM (SRV Network; SRVN)) enhanced and streamlined options for military service members and veterans to pursue solar training, certification, and employment, while advancing solar employers’ efforts and capacity to invest in military talent as part of a long-term workforce development strategy. The SRVN was led by the Interstate Renewable Energy Council (IREC) in partnership with the Solar Energy Industries Association (SEIA), the US Chamber of Commerce Foundation’s Hiring Our Heroes program (HOH) and the North American Board of Certified Energy Practitioners (NABCEP). Through several direct-impact and indirect, high-impact capacity building initiatives aligned with six key objectives, the SRV Network strengthened solar career pathways, and promoted increased representation of military talent across all levels and sectors of the solar workforce. A work-based learning Corporate Fellowship model connected transitioning service members with on-the-job experience in leadership roles with solar employers nationwide. The project advanced broader veteran recruitment and talent development by expanding GI Bill eligibility and streamlining veterans’ pathways for solar training and credentialing, supported direct connections to jobs with top solar employers, and led coordination among key education and industry partners to advance registered apprenticeships aligned with solar career pathways. To ensure that the project best served the needs of all stakeholders, an Advisory Committee of military-connected solar professionals, solar employers, and training providers met biannually to guide project activities and sustainability plans. The project team engaged the broader “SRV Network” (comprised of over 2,000 veterans, employers and training organizations) through regular newsletters and targeted outreach to share resources, hiring fairs, webinars, and other opportunities for engagement. The work done under this award builds on the previous iterations of the Department of Energy’s Solar Ready Vets ® program. As the solar industry continues to grow rapidly over the next decade, the military community will continue to be a highly valuable source of talent. The relationships established and work accomplished through this project will have an enduring positive impact well beyond the funding period.

14 SOLAR ENERGY↗

Intermediate band solar cells: Recent progress and future directions

Extensive literature and publications on intermediate band solar cells (IBSCs) are reviewed. A detailed discussion is given on the thermodynamics of solar energy conversion in IBSCs, the device physics, and the carrier dynamics processes with a particular emphasis on the two-step inter-subband absorption/recombination processes that are of paramount importance in a successful implementation high-efficiency IBSC. The experimental solar cell performance is further discussed, which has been recently demonstrated by using highly mismatched alloys and high-density quantum dot arrays and superlattice. IBSCs having widely different structures, materials, and spectral responses are also covered, as is the optimization of device parameters to achieve maximum performance.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

INFLUENCE OF SOLAR WIND HEATING FORMULATIONS ON THE PROPERTIES OF SHOCKS IN THE CORONA

One of the challenges in constructing global magnetohydrodynamic (MHD) models of the inner heliosphere for, e.g., space weather forecasting purposes, is to correctly capture the acceleration and expansion of the solar wind. In current models, various ad hoc heating prescriptions are introduced in order to obtain a realistic steady-state solar wind solution. In this work, we demonstrate, by performing MHD simulations of erupting coronal mass ejections (CMEs) on identical solar wind solutions employing different heating formulations, that the dynamics and properties of the CME-driven shocks are significantly altered depending on the applied heating prescription. Furthermore, we show how two popular heating formulations can be altered so as to yield shock properties consistent with theory and available coronal shock observations.

79 ASTRONOMY AND ASTROPHYSICS↗

ON THE FORMATION OF PLANETESIMALS VIA SECULAR GRAVITATIONAL INSTABILITIES WITH TURBULENT STIRRING

We study the gravitational instability (GI) of small solids in a gas disk as a mechanism to form planetesimals. Dissipation from gas drag introduces secular GI, which proceeds even when standard GI criteria for a critical density or Toomre's Q predict stability. We include the stabilizing effects of turbulent diffusion, which suppresses small-scale GI. The radially wide rings that do collapse contain up to {approx}0.1 Earth masses of solids. Subsequent fragmentation of the ring (not modeled here) would produce a clan of chemically homogenous planetesimals. Particle radial drift time scales (and, to a lesser extent, disk lifetimes and sizes) restrict the viability of secular GI to disks with weak turbulent diffusion, characterized by {alpha} {approx}< 10{sup -4}. Thus, midplane dead zones are a preferred environment. Large solids with radii {approx}>10 cm collapse most rapidly because they partially decouple from the gas disk. Smaller solids, even below {approx} mm sizes, could collapse if particle-driven turbulence is weakened by either localized pressure maxima or super-solar metallicity. Comparison with simulations that include particle clumping by the streaming instability shows that our linear model underpredicts rapid, small-scale gravitational collapse. Thus, the inclusion of more detailed gas dynamics promotes the formation of planetesimals. We discuss relevant constraints from solar system and accretion disk observations.

79 ASTRONOMY AND ASTROPHYSICS↗