SEARCH · Search NASA
Results for “Structural Effects”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
A mechanism of Cu work function reduction in CsBr/Cu photocathodes
Thin films of CsBr deposited on Cu(100) have been proposed as next-generation photocathode materials for applications in particle accelerators and free-electron lasers. However, the mechanisms underlying an improved photocathode performance remain poorly understood. We present density Functional Theory (DFT) calculations of the work function reduction following the application of CsBr thin film coatings to Cu photocathodes. The effects of structure and van der Waals forces are examined. Calculations suggest that CsBr films can reduce the work function by around 1.5 eV, which would explain the exponential increase in quantum efficiency (QE) of coated vs. uncoated photocathodes. In conclusion, a model explaining experimentally observed laser activation of photocathode is provided whereby the photo-induced creation of di-vacancies at the surface, and their subsequent diffusion throughout the lattice and segregation at the interface leads to a further increase in QE after a period of laser irradiation.
In situ Rheo-GISANS of triblock copolymers: gelation and shear effects on quasi-crystalline structures at interfaces
The behaviour of polymeric systems at surfaces and under flow is extremely important in many applications, ranging from drug delivery to lubrication. We have studied a model triblock copolymer in deuterated water combining in situ rheology and grazing incidence small angle neutron scattering. Several thermotropic phases appear as a function of the temperature, including a bicontinuous phase not present in the bulk. Moreover, gelation can occur following a different route depending on the concentration. Here, we show that shearing can be used to monitor the structural integrity of the micellar systems and in some cases as a tool for modifying the thermotropic phases: an fcc (face centred cubic) phase is sheared into a hcp (hexagonally close packed) phase, and is then recovered by cycling the temperature.
Effect of water on the structure of a prototype ionic liquid
The influence of water on the structure of a prototype ionic liquid (IL) 1-octyl-3-methyimidazolium tetrafluoroborate (C8mimBF4) is examined in the IL-rich regime using high-energy x-ray diffraction (HEXRD) and molecular dynamics (MD) simulations. A many-body polarizable force field APPLE&P was developed for C8mimBF4 water mixture. It predicts structure factors of pure IL and IL-water mixture in excellent agreement with the HEXRD experiments. The MD results provide detailed insights into the structural changes from the partial structure factors, 2-D projections of the simulation box and 3-D distribution functions. Water partitioning with IL and its competition with BF4- for complexing the imidazolium rings was examined. The added water molecules occupy a diffuse coordination shell around the imidazolium ring but are not present around the alkyl tail. The strong coordination of the fluorine atoms of the BF4- anions to the imidazolium ring is not significantly changed by the addition of water. These results are consistent with the very small differences in the average structure between the pure IL and the mixture.
Effect of hydrogenation on the structure and magnetic properties of an iron oxide cluster
The structure and properties of the Fe8O12Hn clusters (n = 0–18) are computed using the all-electron density functional theory with the generalized gradient approximation for the exchange–correlation potential. The ground state of Fe8O12 is found to be a singlet state having a bi-capped octahedron geometry. Upon hydrogenation, the octahedral framework of Fe is retained in Fe8O12Hn up to n < 7, beyond which point the iron octahedron transforms into a cube. Hydrogen atoms are bound to oxygen atoms up to n = 12, but they bind to the faces of the Fe8 cube when n > 12. The total spin magnetic moment of a Fe8O12Hn cluster is larger than 6 μB for 1 ≤ n ≤ 18, except for n = 8 and 10, where the lowest total energy states are antiferromagnetic singlets. The reason for this deviation from the general behavior in the Fe8O12Hn series is attributed to the collective superexchange phenomenon. Surprisingly, the total spin magnetic moment of a Fe8O12Hn cluster is found to be substantially larger than the total spin magnetic moment of the bare Fe8 cluster when n = 12–18. All of the Fe8O12Hn clusters are stable with respect to an abstraction of a single hydrogen atom but are unstable toward the abstraction of an H2 dimer when n =10 and n = 14–18.
Effects of geometry and composition of soft polymer films embedded with nanoparticles on rates for optothermal heat dissipation
Embedding soft matter with nanoparticles (NPs) can provide electromagnetic tunability at sub-micron scales for growing number of uses in healthcare, sustainable energy, and chemical processing. But use of NP-embedded soft material in temperature-sensitive applications has been constrained by difficulty in validating prediction of rates for energy dissipation across thermally insulating to conducting behavior. This work improved embedment of monodisperse NP to stably decrease inter-NP spacings in polydimethylsiloxane (PDMS) to nano-scales. Lumped-parameter and finite element analyses were refined to apportion effects of structure and composition of NP-embedded soft polymer to rates for conductive, convective, and radiative heat dissipation. These advances allowed rational selection of PDMS size and NP composition to optimize measured rates of internal (conductive) and external (convective and radiative) heat dissipation. Stably reducing distance between monodisperse NP to nano-scale intervals increased overall heat dissipation rate by up to 29%. Refined fabrication of NP-embedded polymer enabled tunability of dynamic thermal response, the ratio of internal to external dissipation rate, by a factor of 3.1 to achieve a value of 0.091, the largest reported to date. Heat dissipation rates simulated a priori were consistent with 130 μm resolution thermal images across 2- to 15-fold changes in NP-PDMS geometry and composition. Nusselt number was observed to increase with the fourth root of Rayleigh number across thermally insulative and conductive regimes, further validating the approach. These developments support model-informed design of soft media embedded with nano-scale spaced NP to optimize heat dissipation rates for evolving temperature-sensitive diagnostic and therapeutic modalities as well as emerging uses in flexible bioelectronics, cell and tissue culture, and solar-thermal heating.
Hydrogen evolution activity tuning via two-dimensional electron accumulation at buried interfaces
Explore the source record for details and available documents.
Impact of backbone composition on homopolymer dynamics and brush block copolymer self-assembly
Abstract not provided
Size-dependent chiro-optical properties of CsPbBr 3 nanoparticles
Chiral metal halide perovskites have garnered substantial interest because of their promising properties for application in optoelectronics and spintronics. Understanding the mechanism of chiral imprinting is paramount for optimizing their utility. To elucidate the nature of the underlying chiral imprinting mechanism, we investigated how the circular dichroism (CD) intensity varies with nanoparticle size for quantum confined sizes of colloidal CsPbBr 3 perovskite nanoparticles (NPs) capped by chiral β-methylphenethylammonium bromide ligands. We find that the CD intensity decreases strongly with increasing NP size, which, along with the shape of the CD spectra, points to electronic interactions between ligand and NP as the dominant mechanism of chiral imprinting in smaller NPs. We observe that as the NP size increases and crosses the quantum confinement threshold, the dominant mechanism of chirality transfer switches and is dominated by surfaces effects, e.g., structural distortions. Furthermore, these findings provide a benchmark for quantitative models of chiral imprinting.
Elucidating the effect of Fe substitution on structural and redox stability of Na 2 Mn 3 O 7
Fe was substituted into the anionic redox-active layered transition metal oxide (TMO) Na 2 Mn 3 O 7 lattice, which contains ordered TM vacancies in the TMO layer, improving the electrochemical performance. Excavator icon by FAAZT Creative/Adobe Stock.
Strong Effect of Nonpolar Solvent Molecular Structure on CdSe Nanoplatelet Stacking
We report a drastic difference in stacking behavior of oleic acid-stabilized 4-monolayer (4 ML) CdSe nanoplatelets (NPLs) in toluene and methylcyclohexane (MCH), two nonpolar solvents that differ in the conformational flexibility of their molecules. Using liquid cell transmission electron microscopy (TEM) and small angle scattering (SAXS) techniques, we show that NPLs form microns-long ribbons consisting of 4 ML CdSe NPLs in toluene, the solvent widely used to form stable colloidal solutions of a broad range of quasi-spherical nanoparticles. In contrast, 4 ML CdSe NPLs are well dispersed in MCH. The difference in stacking behavior of NPLs in toluene and MCH suggests that the conformational flexibility of the solvent molecules, such as the ability to adopt multiple chair conformations, modulates nanoplatelet interactions. Molecular dynamics (MD) simulations reveal that solvent molecules subtly alter the structure of the organic ligand shell. These solvent-dependent changes propagate to the inorganic core, modulating the degree of CdSe nanoplatelet (NPL) twisting and, consequently, the properties of the nanoparticles. We show that toluene better solvates oleate ligands while MCH induces a bimodal oleate span distribution, which can lead to increased solubility of CdSe NPLs. In addition, the solvent can also influence the inorganic core, which, in turn, can modify the nanoparticle properties. We demonstrate that destabilization of toluene solution containing ribbons of 4 ML CdSe NPLs without CdS shells results in the formation of NPL assemblies with amplified spontaneous emission (ASE) with a low threshold of 14 µJ cm−2 that is comparable with that of CdSe/CdS core/shell NPLs. Our results emphasize that the solvent plays a major role in mediating interactions between NPLs and hence their processability for fabrication of functional structures.
Effect of Ti Doping on Structural and Electrical Properties of Ba(Fe{sub 0.5}Nb{sub .0.5})O{sub 3} Ceramic
Polycrystalline samples of Ba(Fe{sub 1-x}Ti{sub 2x}Nb{sub 1-x}){sub 0.5}O{sub 3}(BFTN) with x = 0, 0.1, 0.2 have been synthesized using a high-temperature solid-state reaction technique. The X-ray diffraction of the sample (x = 0) at room temperature shows a monoclinic phase. When the doped contents of Ti are over 10 mole% the structure changes from monoclinic to tetragonal. Scanning electron micrographs of the compounds show that grains are uniformly and densely distributed over the entire surface of the sample. The complex impedance plots show that there is only bulk (grain) contribution in the compounds in the said temperature range, and is of non-Debye type of relaxation. Bulk resistance of the material has been observed to be concentration dependent. Conductivity analysis indicates that ac/dc conductivity of the materials increases with increase in temperature. It shows a typical negative temperature coefficient of resistance (NTCR) behaviour like a semiconductor. The conductivity has been found to decrease on Ti doping.
High thermoelectric performance BiSbTe alloy with unique low-dimensional structure
We report a detailed description of an innovative route of a melt spinning (MS) technique combined with a subsequent spark plasma sintering process in order to obtain high performance p-type Bi{sub 0.52}Sb{sub 1.48}Te{sub 3} bulk material, which possesses a unique low-dimensional structure. The unique structure consists of an amorphous structure, 5-15 nm fine nanocrystalline regions, and coherent interfaces between the resulting nanocrystalline regions. Measurements of the thermopower, electrical conductivity, and thermal conductivity have been performed over a range of temperature of 300-400 K. We found that MS technique can give us considerable control over the resulting nanostructure with good thermal stability during the temperature range of 300-400 K and this unique structure can effectively adjust the transport of phonons and electrons, in a manner such that it is beneficial to the overall thermoelectric performance of the material, primarily a reduction in the lattice thermal conductivity. Subsequently, this results in a maximum figure of merit ZT value of 1.56 at 300 K for p-type Bi{sub 0.52}Sb{sub 1.48}Te{sub 3} bulk material. This ZT value is over a 50% improvement of that of the state of the art commercial Bi{sub 2}Te{sub 3} materials. We also report results of thermal cycling of this material for over one hundred cycles between 300-400 K. Our work offers an innovative route for developing high performance bismuth telluride based alloys and devices, which have even broader prospects for commercial applications. This technique may also be applicable to other thermoelectric materials.
Hybrid states of Tamm plasmons and exciton polaritons
Channeling of exciton polaritons in the plane of semiconductor microcavities can be achieved by the deposition of metallic mesas on the top of the semiconductor structure. We show theoretically that the regime of strong coupling between cavity polaritons and Tamm surface plasmons is possible in such structures. The effect is favorable for the spatial confinement of polaritons and the formation of hybrid one-dimensional plasmon-polariton modes.
Electron cyclotron-electron Bernstein wave emission diagnostics for the COMPASS tokamak
The COMPASS tokamak recently started operation at the Institute of Plasma Physics AS CR, v.v.i., Prague. A new 16-channel radiometer, operating alternatively in three frequency bands, has been designed and constructed. The system is prepared for detection of normal electron cyclotron emission (O1 or X2) or oblique electron Bernstein wave emission. The end-to-end calibration method includes all components that influence the antenna radiation pattern. A steady recalibration is possible using a noise generator connected to the radiometer input through a fast waveguide PIN-switch. Measurements of the antenna radiation characteristics (2D electric field) were performed in free space as well as in the tokamak chamber, showing the degradation effect of structures on the Gaussian beam shape. First plasma radiation temperature measurements from low-field circular plasmas are available.
Propagation of terahertz waves in an atmospheric pressure microplasma with Epstein electron density profile
Propagation properties of terahertz (THz) waves in a bounded atmospheric-pressure microplasma (AMP) are analyzed in this study. A modified Epstein profile model is used to simulate the electron density distribution caused by the plasma sheaths. By introducing the dielectric constant of a Drude-Lorentz model and using the method of dividing the plasma into a series of subslabs with uniform electron density, the coefficients of power reflection, transmission, and absorption are derived for a bounded microplasma structure. The effects of size of microplasma, electron density profile, and collision frequency on the propagation of THz waves are analyzed numerically. The results indicate that the propagation of THz waves in AMPs depend greatly on the above three parameters. It is demonstrated that the THz wave can play an important role in AMPs diagnostics; meanwhile, the AMP can be used as a novel potential tool to control THz wave propagation.
Effect of Magnesium Doping on Structural and Optical Properties of ZnO Nanoparticles Synthesized by Mechanochemical Processing
This paper presents the structural and optical properties of magnesium doped zinc oxide nanoparticles synthesized by mechanochemical processing. ZnO nanoparticles of different crystallite size were synthesized by milling the precursor materials for 5 h in a high energy planetary ball mill in Zr{sub 2}O{sub 3} media. NaCl was added as diluent to control the reaction rate in order to avoid the growth of nanoparticles. The milled powders were heat treated at 600 deg. C and then NaCl was leached out using distilled water. X-ray Diffraction (XRD) technique was employed for the phase and crystallite size analysis of the nanoparticles. Crystallite sizes were calculated from the XRD peak broadening using the Sherrer's formula. Scanning Electron Microscope was employed to analyze the particle morphology and size distribution of the Mg doped ZnO nanoparticles. Ultraviolet-Visible (Uv-Vis) spectroscope also was employed to analyze the optical absorption of the ZnO nano particles. Tauc plots were used to determine the energy gap of the nanoparticles samples.
Kinetic analysis of two dimensional metallic grating Cerenkov maser
The dispersion relation of two dimensional metallic grating Cerenkov maser has been given by using kinetic analysis, in which the influence of electron movement is directly considered without using an equivalent dielectric medium assumption. The effects of structural parameters and beam state on the interaction gain and synchronous frequency have also been investigated in detail by numerical calculations. To an illustrative case, the quantitative relations produced from varying the gap distance between electron beam and metallic grating, beam current, electron transverse to axial velocity ratio, and electron axial velocity spread have been obtained. The developed method can be used to predict the real interaction system performances.