Search NASA⌕ Search

SEARCH · Search NASA

Results for “Trajectory optimization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,657 records · Page 92

PAAV Concept Document

The Pathfinding for Airspace with Autonomous Vehicles (PAAV) Concept Document, version 1.0, lays out the key challenges and potential solutions for the use of uncrewed aircraft (UA) technology for future regional air cargo operations. The challenges and solutions described in this document were informed by communications with the UA industry community (e.g., RTCA, the Federal Aviation Administration, and regional air cargo business operators), as well as the PAAV team’s research activities during the last two years including four tabletop exercises, a human-in-the-loop simulation study, a numerical simulation study, a functional allocation study, and flight data analysis (Appendix A). This document first describes the expected operational context of PAAV (Section 2), such as the flight mission, baseline UAS components, nominal operations, m:N operations (i.e., "m" remote pilots per "N" aircraft), and off-nominal operations. This context sets the scope for the PAAV concept development work. PAAV concept development assumes that UA operations will be increasingly autonomous. Thus, near- and far-term assumptions are defined (Section 3). PAAV identified seven key challenges for UA operations (Section 4): - Flight route planning - Separation and flow management - Traffic pattern integration - Contingency management - Taxi, takeoff, and landing - m:N operations - Communications operations The following 13 potential solutions to these challenges are then described (Section 5): - Scalable communications architecture - Data link - Designated UAS corridors - Crew planning for m:N operations - Flight route optimization - Traffic load-level control - Trajectory solutions with data link - Automated hazard avoidance for m:N operations - Traffic pattern integration (TPI) tool - Standard lost command and control (C2) link (LC2L) procedures - Automated hazard avoidance under LC2L - Auto-taxi, auto-takeoff, and auto-land - Ground control station (GCS) user interface for m:N operations The document attempts to link each of these solutions to one or more of the challenge areas. Novel solutions involving numerous automation technologies are needed to mitigate traffic and airspace management challenges, especially for realizing m:N operations and ensuring safety under LC2L conditions. The purpose of this document is to help understand alternatives and tradeoffs among potential solutions and provide a foundation for a cohesive PAAV concept that will be described and refined in subsequent concept versions.

Unmanned aircraft, uncrewed aircraft, regional air↗

Powertrain control system and method of operating the same

A system and method are provided for operating a powertrain control system. The method includes receiving data measured from a plurality of sensors, the measured data relating to distance dependent speed values, and receiving information from one or more vehicle modules, the vehicle module information relating to distance independent speed values. The method further includes building a speed trajectory profile for a horizon window that includes a plurality of speed change regions represented by at least some distance dependent speed values or at least some distance independent speed values, and creating a synthesized speed profile for the horizon window by processing the speed trajectory profile. The synthesized speed profile optimizes efficiency of the powertrain control system at each of the plurality of speed change regions.

33 ADVANCED PROPULSION SYSTEMS↗

Extremal trajectories in a nilpotent sub-Riemannian problem on the Engel group

On the Engel group a nilpotent sub-Riemannian problem is considered, a 4-dimensional optimal control problem with a 2-dimensional linear control and an integral cost functional. It arises as a nilpotent approximation to nonholonomic systems with 2-dimensional control in a 4-dimensional space (for example, a system describing the navigation of a mobile robot with trailer). A parametrization of extremal trajectories by Jacobi functions is obtained. A discrete symmetry group and its fixed points, which are Maxwell points, are described. An estimate for the cut time (the time of the loss of optimality) on extremal trajectories is derived on this basis. Bibliography: 25 titles.

97 MATHEMATICS AND COMPUTING↗

General Methodology for Designing Spacecraft Trajectories

A methodology for designing spacecraft trajectories in any gravitational environment within the solar system has been developed. The methodology facilitates modeling and optimization for problems ranging from that of a single spacecraft orbiting a single celestial body to that of a mission involving multiple spacecraft and multiple propulsion systems operating in gravitational fields of multiple celestial bodies. The methodology consolidates almost all spacecraft trajectory design and optimization problems into a single conceptual framework requiring solution of either a system of nonlinear equations or a parameter-optimization problem with equality and/or inequality constraints.

Condon, Gerald↗

Applications of numerical optimization methods to helicopter design problems: A survey

A survey of applications of mathematical programming methods is used to improve the design of helicopters and their components. Applications of multivariable search techniques in the finite dimensional space are considered. Five categories of helicopter design problems are considered: (1) conceptual and preliminary design, (2) rotor-system design, (3) airframe structures design, (4) control system design, and (5) flight trajectory planning. Key technical progress in numerical optimization methods relevant to rotorcraft applications are summarized.

Miura, H.↗

Applications of numerical optimization methods to helicopter design problems - A survey

A survey of applications of mathematical programming methods is used to improve the design of helicopters and their components. Applications of multivariable search techniques in the finite dimensional space are considered. Five categories of helicopter design problems are considered: (1) conceptual and preliminary design, (2) rotor-system design, (3) airframe structures design, (4) control system design, and (5) flight trajectory planning. Key technical progress in numerical optimization methods relevant to rotorcraft applications are summarized.

Miura, H.↗

Applications of numerical optimization methods to helicopter design problems - A survey

A survey of applications of mathematical programming methods is used to improve the design of helicopters and their components. Applications of multivariable search techniques in the finite dimensional space are considered. Five categories of helicopter design problems are considered: (1) conceptual and preliminary design, (2) rotor-system design, (3) airframe structures design, (4) control system design, and (5) flight trajectory planning. Key technical progress in numerical optimization methods relevant to rotorcraft applications are summarized.

Miura, H.↗

Minimum impulse trajectories for Mars round trip missions

Data are presented for minimum-impulse earth-Mars round-trip trajectories for the 2010 to 2027 Mars launch opportunities. Round-trip mission times from 120 to 600 days, including a 30-day rendezvous at Mars, for direct trajectories and trajectories utilizing a Venus gravitational assist are considered. Optimal planetary launch and arrival dates and total impulse requirements are based on all maneuvers being performed propulsively with no finite burn or other losses. Direct trajectories have the lowest impulse requirements for shorter mission times and Venus gravitational assist trajectories have the lowest impulse requirements for longer mission times. It is shown that one can depart on trajectories to Mars, beginning with lower energy trajectories to the moon. The fuel savings varies, depending on the final energy level required and on the swingby procedure used. Procedures discussed include single lunar swingbys, double-powered or unpowered lunar swingbys, third lunar flybys a year later, and gravity assists by Venus and earth after the final lunar swingby.

Horvat, Glen M.↗

Fast Earth-Mars Roundtrip Trajectories to Reduce Health and Safety Risks for Crewed Missions

The extended mission duration of a crewed Mars mission compounds integrated risks to crew health and safety. Shortening mission duration would therefore have a direct impact on reducing many human health and performance risk factors. This paper describes trajectory feasibility analyses performed to examine trajectory options for a fast crewed mission to Mars. Studies were conducted to examine options with short overall mission durations (≤ 400-day roundtrip) and options that focus on minimizing astronaut time in deep space, while allowing for longer Mars surface stays. Trade studies were performed to determine ∆v requirements for a range of launch dates, Mars orbit periods, Mars stay times, and Earth-to-Mars flight time maxima. The implications of a Venus gravity assist are also described. The analyses presented here build on and specifically aim to optimize and address key concerns of assumptions made in previously published studies of fast crewed Mars missions.

Mars↗

Poincare: A Multi-Body, Multi-System Trajectory Design Tool

Poincare is a modular trajectory design tool based on a catalog of three-body science orbits and a differential corrector to compute connecting transfer arcs between orbits in multibody systems. Poincare attempts to offer a unified approach, i.e.,an“all-in-one”integrated search within one interface and setup in MONTE (JPL’s signature astrodynamic computing platform.) The Science Orbit Design Tool facilitates rapid and well-informed decisions regarding the selection of periodic orbits for a particular mission and enables the simultaneous study of various orbit alternatives. The Reference Trajectory Design Tool allows the user to calculate optimal transfer paths from a departure orbit to a science orbit via dynamical systems structures (invariant manifolds and Poincare maps), resulting in an end-to-end reference trajectory.

Senent, Juan↗

Development of Complexity Science and Technology Tools for NextGen Airspace Research and Applications

The objective of this research by NextGen AeroSciences, LLC is twofold: 1) to deliver an initial "toolbox" of algorithms, agent-based structures, and method descriptions for introducing trajectory agency as a methodology for simulating and analyzing airspace states, including bulk properties of large numbers of heterogeneous 4D aircraft trajectories in a test airspace -- while maintaining or increasing system safety; and 2) to use these tools in a test airspace to identify possible phase transition structure to predict when an airspace will approach the limits of its capacity. These 4D trajectories continuously replan their paths in the presence of noise and uncertainty while optimizing performance measures and performing conflict detection and resolution. In this approach, trajectories are represented as extended objects endowed with pseudopotential, maintaining time and fuel-efficient paths by bending just enough to accommodate separation while remaining inside of performance envelopes. This trajectory-centric approach differs from previous aircraft-centric distributed approaches to deconfliction. The results of this project are the following: 1) we delivered a toolbox of algorithms, agent-based structures and method descriptions as pseudocode; and 2) we corroborated the existence of phase transition structure in simulation with the addition of "early warning" detected prior to "full" airspace. This research suggests that airspace "fullness" can be anticipated and remedied before the airspace becomes unsafe.

Holmes, Bruce J.↗

VIPRE: A Tool Aiding the Design for Entry Probe Missions

Exploring planetary atmospheres uncovers important information for how our solar system formed and evolved. While remote sensing is extensively used, some crucial observations require in-situ measurements by an atmospheric probe. Given their scientific importance, probe missions to Saturn, Uranus and Neptune are considered for the coming decades. In anticipation of future probe missions, the software tool VIPRE was developed as proof-of-concept to facilitate selection of probe entry locations. Currently, there is no analytical way to identify which interplanetary trajectory from thousands of feasible launch opportunities is optimal for a considered mission concept. The search and decision process for that solution is complex and relies on the intuition of mission designers, who focus on a subset of trajectories to make the trade space manageable. The idea of VIPRE is to (1) generate a multi-dimensional data cube showing relevant engineering and science parameters simultaneously for thousands of trajectories, and (2) visualize the data for all entry sites over the body's envelope. VIPRE lays the foundation to make the data available for browsing in a 3-D visualization to identify the best family of solutions for a given mission. The paper introduces the validated and verified core algorithms of VIPRE, published on GitHub. VIPRE serves as a basic framework to be used and extended for different purposes. The paper presents the motivation for the development and algorithms. It explains the computation and data visualization strategy, and gives a list of suggested functionalities to extend and further develop VIPRE to fully leverage its potential.

Ice Giants↗

Lunar Browser trajectory tool

The Lunar Browser is a tool developed at NASA Ames Research Center for building, processing, and analyzing a database of lunar transfer trajectory solutions. Examples of intended uses include design trades for lunar missions and preliminary assessments of key parameters such as launch opportunities, delta-v and propulsion budgets, communication windows, eclipse durations, and lunar landing windows. The Lunar Browser tool is in the development phase and it is already producing results in its current form to address various NASA program requirements, proposals, and mission trajectories. The tool has also been used for research analysis in trajectory design, including a first publication regarding its application to the CLPS and Artemis programs. In particular, the results included transfers to lunar frozen orbits. Future work include the generation of more trajectories to expand the existing database and the optimization of the results.

Lunar Browser trajectory tool↗

A randomized sketching trust-region secant method for low-memory dynamic optimization

The numerical solution of dynamic optimization problems is often limited by the memory required to store the state trajectory, which is used to evaluate the objective function and its derivatives. Recently, [R. Muthukumar et al., SIAM Journal on Optimization 31(2), pp. 1242–1275 (2021)] introduced a trust-region method for dynamic optimization that employs randomized sketching to compress the state trajectory, resulting in inexact derivative computations. By adaptively learning the sketch rank, the trust-region algorithm achieves rigorous convergence guarantees. Here, we extend this approach to use secant Hessian approximations. Due to the randomness introduced by the sketch, the traditional secant update formulae can produce poor Hessian approximations. In particular, the difference of two gradients, computed from two different sketches, may be inconsistent. To overcome this, we employ a sketched approximation of the Hessian application, in lieu of computing the gradient difference. We numerically demonstrate the improved stability of this approach on an example from PDE-constrained optimization.

dynamic optimization↗

Dynamics and control of DNA sequence amplification

DNA amplification is the process of replication of a specified DNA sequence in vitro through time-dependent manipulation of its external environment. A theoretical framework for determination of the optimal dynamic operating conditions of DNA amplification reactions, for any specified amplification objective, is presented based on first-principles biophysical modeling and control theory. Amplification of DNA is formulated as a problem in control theory with optimal solutions that can differ considerably from strategies typically used in practice. Using the Polymerase Chain Reaction as an example, sequence-dependent biophysical models for DNA amplification are cast as control systems, wherein the dynamics of the reaction are controlled by a manipulated input variable. Using these control systems, we demonstrate that there exists an optimal temperature cycling strategy for geometric amplification of any DNA sequence and formulate optimal control problems that can be used to derive the optimal temperature profile. Strategies for the optimal synthesis of the DNA amplification control trajectory are proposed. Analogous methods can be used to formulate control problems for more advanced amplification objectives corresponding to the design of new types of DNA amplification reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗