Search NASA⌕ Search

SEARCH · Search NASA

Results for “catalyst development”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,657 records · Page 92

Activating Bi p- orbitals in Dispersed Clusters of Amorphous BiO x for Electrocatalytic Nitrogen Reduction

Catalytic strategies based on main group metals are significantly less advanced than those of transition metal catalysis, leaving untapped areas of potentially fruitful research. Here, in this study, we demonstrate an effective approach for the modulation of Bi 6p energy levels during the construction of atomically dispersed clusters of amorphous BiO x . Bi oxidation state is proposed to strongly affects the nitrogen fixation activity, with the half-occupied p z orbitals of the Bi 2+ ions being highly efficient toward electron injection into the inert N 2 molecule. With sufficient catalytic sites to adsorb and activate N 2 , the bonding between N 2 and catalyst is able to be in situ identified. The catalyst shows an outstanding Faraday efficiency (≈30 %) and high yield (≈113 μg h -1 mg -1 cat ) in NH 3 production, outperforming most of the existing catalysts in aqueous solution. These results lay the basis for developing the potential of p-block elements for catalysis of multi-electron reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

In Situ Reconstructed Mo–doped Amorphous FeOOH Boosts the Oxygen Evolution Reaction

Developing a fast and highly active oxygen evolution reaction (OER) catalyst to change energy kinetics technology is essential for making clean energy. Herein, we prepare three-dimensional (3D) hollow Mo-doped amorphous FeOOH (Mo-FeOOH) based on the precatalyst MoS 2 /FeC 2 O 4 via in situ reconstruction strategy. Mo-FeOOH exhibits promising OER performance. Specifically, it has an overpotential of 285 mV and a durability of 15 h at 10 mA cm –2 . Characterizations indicate that Mo was included inside the FeOOH lattice, and it not only modifies the electronic energy levels of FeOOH but also effectively raises the inherent activity of FeOOH for OER. Additionally, in situ Raman analysis indicates that FeC 2 O 4 gradually transforms into the FeOOH active site throughout the OER process. Finally, this study provides ideas for designing in situ reconstruction strategies to prepare heteroatom doping catalysts for high electrochemical activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Advances in arene alkylation and alkenylation catalyzed by transition metal complexes based on ruthenium, nickel, palladium, platinum, rhodium and iridium

Over the past several years, significant advancements have been made for transition metal catalyzed arene alkylation and alkenylation that operate by metal mediated arene C–H activation. These catalytic processes provide a route for arene alkylation and alkenylation that is complementary to traditional acid catalyzed reactions (e.g., Friedel-Crafts reactions and zeolite-based arene alkylations). Catalysts from Groups 8, 9 and 10 have dominated new developments. As a result, this monograph will overview advancements for catalytic arene alkylation and alkenylation for hydrocarbon substrates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of dilute Rh on oxygen dissociation, spillover, and the oxidation of Cu across many orders of magnitude pressure

Knowledge of how trace amounts of more reactive metals influence the oxidation rate and mechanism of Cu surfaces is essential for developing strategies to optimize the performance of Cu-based catalysts. We find that the addition of 1% Rh to Cu(111) increases the initial O 2 dissociation rate by approximately 9-fold. CO poisoning experiments reveal that single Rh atoms activate O 2 and facilitate the spillover of atomic oxygen to Cu sites. Scanning tunneling microscopy (STM) and in situ X-ray photoelectron spectroscopy (XPS) support this mechanism, showing enhanced surface oxygen near Rh atoms. Here, a density functional theory (DFT)-based model demonstrates that Rh binds the O 2 precursor 0.15 eV more strongly than Cu(111) and lowers the O 2 dissociation barrier by 0.02 eV. Both single-crystal and nanoparticle experiments show that at low oxygen pressures, Rh enhances Cu oxidation, whereas at higher pressures, it inhibits deeper oxidation, as evidenced by in situ ultraviolet-visible (UV-vis) spectra.

36 MATERIALS SCIENCE↗

Theoretical Investigation of Solvent Effects on the Hydrodeoxygenation of Propionic Acid over a Ni(111) Catalyst Model

The effect of two solvents, liquid water and 1,4-dioxane, has been studied from first principles on the hydrodeoxygenation of propionic acid over a Ni (111) catalyst surface model. A mean-field microkinetic model was developed to investigate these effects at a temperature of 473 K. Under all reaction conditions, a decarbonylation mechanism is favored significantly over a decarboxylation pathway. Although no significant solvent effects were observed on the decarbonylation rate, a substantial solvent stabilization of two key surface intermediates in the decarboxylation mechanism, CH 3 CCOO and CH 3 CHCOO, lead to a notable increase of the decarboxylation rate by two orders of magnitude in liquid water and by one order of magnitude in liquid 1,4-dioxane. Furthermore, a significant solvent stabilization of the transition state of C-H bond cleavage of the α-carbon of CH 3 CHCO, relative to the stabilization of the C-C bond cleavage of the α-carbon of CH 3 CHCO, leads to a change in dominant pathway in the liquid phase environments. Finally, a sensitivity analysis shows that the C-OH bond cleavage of propionic acid and C-C bond cleavage of the α-carbon of CH 3 CHCO are the most rate controlling states in the gas phase. In contrast, in solvents the dehydrogenation of CH 3 CHCO becomes the most influential step. This shift in rate controlling state is attributed to the solvent effect on the dehydrogenation of CH 3 CHCO, which is facilitated in aqueous phase. Altogether, it is likely that the investigated (111) facet of Ni is not active for the hydrodeoxygenation of propionic acid in neither the gas nor liquid phase and other Ni facets or phases must be responsible for the experimentally observed kinetics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Impact of Ti Incorporation on Hydroxylation and Wetting of Fe 3 O 4

Understanding the interaction of water with compositionally tuned metal oxides is central to exploiting their unique catalytic and magnetic properties. However, processes such as hydroxylation, wetting, and resulting changes in electronic structure at ambient conditions are challenging to probe in situ. Here, we examine the hydroxylation and wetting of Fe(3-x)TixO4 epitaxial films directly using ambient pressure X-ray photoelectron spectroscopy under controlled relative humidity. Fe2+ formation promoted by Ti4+ substitution for Fe3+ increases with hydroxylation, commensurate with a decrease in the surface work function or change in the surface dipole. The incorporation of small amounts of Ti (x=0.25) as a bulk dopant dramatically impacts hydroxylation, in part due to surface segregation, leading to coverages closer to that of TiO2 than Fe3O4. However, the Fe(3-x)TixO4 compositional series shows a similar affinity for water physisorption, which begins at notably lower relative humidity than on TiO2. The findings suggest that relative humidity rather than surface hydroxyl density controls wettability. Studies of this kind directly relate to rational design of doped magnetite into more active catalysts for UV/Fenton degradation, the adsorption of contaminants, and the development of spin filters.

Environmental Molecular Sciences Laboratory↗

Stereoconvergent Reduction of Activated Alkenes by a Nicotinamide Free Synergistic Photobiocatalytic System

There is a growing interest in developing cooperative chemoenzymatic reactions to harness the reactivity of chemical catalysts and the selectivity of enzymes for the synthesis of nonracemic chiral compounds. However, existing chemoenzymatic systems with more than one chemical reaction and one enzymatic reaction working cooperatively are rare. Moreover, the application of oxidoreductases in cooperative chemoenzymatic reactions is limited by the necessity of using expensive and unstable redox equivalents such as nicotinamide cofactors. Here we report a lightdriven cooperative chemoenzymatic system comprised of a photoinduced electron transfer reaction (PET) and a photosensitized energy transfer reaction (PEnT) with enzymatic reduction in one-pot to synthesize chiral building blocks of bioactive compounds. As a proof of concept, ene-reductase was directly regenerated by PET in the absence of external cofactors. Meanwhile, enzymatic reduction worked cooperatively with photocatalyst-catalyzed energy transfer that continuously replenished the reactive isomer from the less reactive one. The whole system stereoconvergently reduced E/Z mixtures of alkenes to the enantiopure products. Additionally, enantioselective enzymatic reduction worked competitively with photocatalyst-catalyzed racemic background reaction and side reactions to channel the overall electron flow to the single enantiopure product. As a result, such a light-driven cooperative chemoenzymatic system holds great potential for asymmetric synthesis using inexpensive petroleum or biomass derived alkenes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Designing Ceria/Alumina for Efficient Trapping of Platinum Single Atoms

Cerium oxide (ceria) has been shown to be very effective at trapping platinum atoms, due to formation of stable surface complexes at step edges, where coordinatively unsaturated cerium cations are present. But ceria loses its effectiveness when heated to high temperatures, due to loss of surface area and growth in particle size associated with sintering of the oxide. Being a rare-earth, and with limited supplies worldwide, it is important to develop methods to improve the effectiveness of ceria as a catalyst support. Here we explore the performance for trapping Pt atoms when the ceria is supported on a high surface area alumina carrier. This helps create a more sustainable catalyst formulation, especially if we can retain the high dispersion of Pt seen on ceria supports. For this work, we studied the atom trapping efficacy of ceria/alumina samples with increasing ceria content (8 wt% - 50%) and contrasted the behavior with pure ceria. Electron microscopy reveals that when dispersed on alumina, ceria is present in the form of crystalline nanoparticles as well as isolated cerium ions. These two forms of ceria differ markedly in their ability to trap Pt atoms. Atomically dispersed cerium is present in the form of Ce 3+ cations on alumina, however this form of ceria is not effective for trapping Pt atoms. Our results show that the atom trapped Pt resides primarily on crystalline ceria nanoparticles. CO oxidation was used as a probe reaction to evaluate the performance of these Pt AT /ceria-alumina catalysts. As a result, we conclude that over the range of ceria loadings we investigated, 50% ceria/alumina represents the optimal catalyst support for achieving high surface area and atom trapping efficiency while helping reduce the total ceria content in this catalyst system.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Palladium–platinum core-shell icosahedra with substantially enhanced activity and durability towards oxygen reduction

Conformal deposition of platinum as ultrathin shells on facet-controlled palladium nanocrystals offers a great opportunity to enhance the catalytic performance while reducing its loading. Here we report such a system based on palladium icosahedra. Owing to lateral confinement imposed by twin boundaries and thus vertical relaxation only, the platinum overlayers evolve into a corrugated structure under compressive strain. For the core-shell nanocrystals with an average of 2.7 platinum overlayers, their specific and platinum mass activities towards oxygen reduction are enhanced by eight- and sevenfold, respectively, relative to a commercial catalyst. Density functional theory calculations indicate that the enhancement can be attributed to the weakened binding of hydroxyl to the compressed platinum surface supported on palladium. After 10,000 testing cycles, the mass activity of the core-shell nanocrystals is still four times higher than the commercial catalyst. Ultimately, these results demonstrate an effective approach to the development of electrocatalysts with greatly enhanced activity and durability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dissecting the steps of CO2 reduction: 2. The interaction of CO and CO2 with Pd/γ-Al2O3: an in situ FTIR study

Alumina supported Pd catalysts with metal loadings of 0.5, 2.5 and 10 wt% were investigated by in situ FTIR spectroscopy in order to understand the nature of adsorbed species formed during their exposure to CO2 and CO. Exposing the annealed samples to CO2 at 295 K resulted in the formation of alumina support-bound surface species only: linear adsorbed CO2, bidentate carbonates and bicarbonates. Room temperature exposure of all three samples to CO produced IR features characteristic of both ionic and metallic Pd, as well as bands we observed upon CO2 adsorption (alumina support-bound species). Low temperature (100 K) adsorption of CO on the three samples provided information about the state of Pd after oxidation and reduction. Oxidized samples contained exclusively ionic Pd, while mostly metallic Pd was present in the reduced samples. Subsequent annealing of the CO-saturated samples revealed the facile (low temperature) reduction of PdOx species by adsorbed CO. This process was evidenced by the variations in IR bands characteristic of ionic and metallic Pd-bound CO, as well as by the appearance of IR bands associated with CO2 adsorption as a function of annealing temperature. Samples containing oxidized Pd species (oxidized, annealed or reduced) always produced CO2 upon their exposure to CO, while CO2-related surface entities were observed on samples having only fully reduced (metallic) Pd. Acknowledgements: The catalyst preparation was supported by a Laboratory Directed Research and Development (LDRD) project. This work was supported by the US Department of Energy Basic Energy Sciences, Division of Chemical Sciences, Geosciences & Biosciences. Pacific Northwest National Laboratory is operated by Battelle for the US Department of Energy. JHK also acknowledges the support of this work by the 2013 Research Fund of UNIST (Ulsan National Institute of Science and Technology, Ulsan, Korea).

CO and CO2 adsorption↗

Hydrocarbon liquid production via the bioCRACK process and catalytic hydroprocessing of the product oil

Continuous hydroprocessing of liquid phase pyrolysis bio-oil, provided by BDI-BioEnergy International bioCRACK pilot plant at OMV Refinery in Schwechat/Vienna Austria was investigated. These hydroprocessing tests showed promising results using catalytic hydroprocessing strategies developed for unfractionated bio-oil. A sulfided base metal catalyst (CoMo on Al2O3) was evaluated. The bed of catalyst was operated at 400 °C in a continuous-flow reactor at a pressure of 12.1 MPa with flowing hydrogen. The condensed liquid products were analyzed and found that the hydrocarbon liquid was significantly hydrotreated so that nitrogen and sulfur were below the level of detection (<0.05), while the residual oxygen ranged from 0.7 to 1.2%. The density of the products varied from 0.71 g/mL up to 0.79 g/mL with a correlated change of the hydrogen to carbon atomic ratio from 2.1 down to 1.9. The product quality remained high throughout the extended tests suggesting minimal loss of catalyst activity through the test. These tests provided the data needed to assess the quality of liquid fuel products obtained from the bioCRACK process as well as the activity of the catalyst for comparison with products obtained from hydrotreated fast pyrolysis bio-oils from fluidized-bed operation.

09 BIOMASS FUELS↗

Thin Film Morphological Characteristics of a Perfluorinated Anion Exchange Membrane

Anion exchange membranes (AEMs) are a promising technology for fuel cell applications. Most of the research done to date was focused on membrane development, electrode fabrication, or cell performance. Studies of the polymer catalyst interface are needed in order to advance the science of these devices and achieve further improvements. In this work we have studied these interfacial properties using grazing-incidence small-angle x-ray scattering (GISAXS). Thin films of a perfluorinated anion exchange polymer were spin cast onto bare, or silver or platinum coated flat silicon substrates. From the GISAXS data, we can conclude that the polymer chains align parallel to the plain silicon or silver coated substrate at higher thicknesses, >17 nm and, >13 nm respectively. However, on the coated platinum substrate the alignment is somewhere between parallel and perpendicular. The in-plane alignment of ionomer on the surface constrains the swelling of water channels which affects the transport of reactants and products.

30 DIRECT ENERGY CONVERSION↗

Data from Stereoconvergent Reduction of Activated Alkenes by a Nicotinamide Free Synergistic Photobiocatalytic System

There is a growing interest in developing cooperative chemoenzymatic reactions to harness the reactivity of chemical catalysts and the selectivity of enzymes for the synthesis of nonracemic chiral compounds. However, existing chemoenzymatic systems with more than one chemical reaction and one enzymatic reaction working cooperatively are rare. Moreover, the application of oxidoreductases in cooperative chemoenzymatic reactions is limited by the necessity of using expensive and unstable redox equivalents such as nicotinamide cofactors. Here, we report a light-driven cooperative chemoenzymatic system comprised of a photoinduced electron transfer reaction (PET) and a photosensitized energy transfer reaction (PEnT) with an enzymatic reduction in one-pot to synthesize chiral building blocks of bioactive compounds. As a proof of concept, ene-reductase was directly regenerated by PET in the absence of external cofactors. Meanwhile, enzymatic reduction worked cooperatively with photocatalyst-catalyzed energy transfer that continuously replenished the reactive isomer from the less reactive one. The whole system stereoconvergently reduced E/Z mixtures of alkenes to the enantiopure products. Additionally, enantioselective enzymatic reduction worked competitively with photocatalyst-catalyzed racemic background reaction and side reactions to channel the overall electron flow to the single enantiopure product. Such a light-driven cooperative chemoenzymatic system holds great potential for asymmetric synthesis using inexpensive petroleum or biomass-derived alkenes.

Catalysis↗

Three-Dimensional Composite Nanostructures for Lean NO x Emission Control (Final Technical Report)

This final report to the Department of Energy (DOE) and National Energy Technology Laboratory (NETL) for DE-EE0000210 covers the period from October 1, 2009 to July 31, 2013. Under this project, DOE awarded UConn about $1,248,242 to conduct the research and development on a new class of 3D composite nanostructure based catalysts for lean NO x emission control. Much of the material presented here has already been submitted to DOE/NETL in quarterly technical reports. In this project, through a scalable solution process, we have successfully fabricated a new class of catalytic reactors, i.e., the composite nanostructure array (nano-array) based catalytic converters. These nanocatalysts, distinct from traditional powder washcoat based catalytic converters, directly integrate monolithic substrates together with nanostructures with well-defined size and shape during the scalable hydrothermal process. The new monolithic nanocatalysts are demonstrated to be able to save raw materials including Pt-group metals and support metal oxides by an order of magnitude, while perform well at various oxidation (e.g., CO oxidation and NO oxidation) and reduction reactions (H 2 reduction of NO x ) involved in the lean NO x emissions. The size, shape and arrangement of the composite nanostructures within the monolithic substrates are found to be the key in enabling the drastically reduced materials usage while maintaining the good catalytic reactivity in the enabled devices. The further understanding of the reaction kinetics associated with the unique mass transport and surface chemistry behind is needed for further optimizing the design and fabrication of good nanostructure array based catalytic converters. On the other hand, the high temperature stability, hydrothermal aging stability, as well as S-poisoning resistance have been investigated in this project on the nanocatalysts, which revealed promising results toward good chemical and mechanical robustness, as well as S-poisoning resistance. Further investigation is needed for unraveling the understanding, design and selection principles of this new class of nanostructure based monolithic catalysts.

33 ADVANCED PROPULSION SYSTEMS↗

Energy Storage

Energy storage technology is critical if the U.S. is to achieve more than 25% penetration of renewable electrical energy, given the intermittency of wind and solar. Energy density is a critical parameter in the economic viability of any energy storage system with liquid fuels being 10 to 100 times better than batteries. However, the economical conversion of electricity to fuel still presents significant technical challenges. This project addressed these challenges by focusing on a specific approach: efficient processes to convert electricity, water and nitrogen to ammonia. Ammonia has many attributes that make it the ideal energy storage compound. The feed stocks are plentiful, ammonia is easily liquefied and routinely stored in large volumes in cheap containers, and it has exceptional energy density for grid scale electrical energy storage. Ammonia can be oxidized efficiently in fuel cells or advanced Carnot cycle engines yielding water and nitrogen as end products. Because of the high energy density and low reactivity of ammonia, the capital cost for grid storage will be lower than any other storage application. This project developed the theoretical foundations of N 2 catalysis on specific catalysts and provided for the first time experimental evidence for activation of Mo 2 N based catalysts. Theory also revealed that the N atom adsorbed in the bridging position between two metal atoms is the critical step for catalysis. Simple electrochemical ammonia production reactors were designed and built in this project using two novel electrolyte systems. The first one demonstrated the use of ionic liquid electrolytes at room temperature and the second the use of pyrophosphate based electrolytes at intermediate temperatures (200 – 300 ºC). The mechanism of high proton conduction in the pyrophosphate materials was found to be associated with a polyphosphate second phase contrary to literature claims and ammonia production rates as high as 5X 10-8 mol/s/cm 2 were achieved.

25 ENERGY STORAGE↗

Electrochemical conversion of carbon dioxide into chemicals and fuels

CO 2 electrolysis could provide a route to recycle waste CO 2 back to useful carbon-based products that are the basis of today’s economy. Opus 12 worked together with LBNL staff to further develop their CO 2 conversion electrolyzer. Improvements were made to catalyst testing throughput and long-term testing up to 1000h. A basic techno-economic model was constructed to estimate the product cost of CO 2 -derived compounds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Catalytic Conversion of Ethylene to Value-added Materials (Final Report)

The general goal of the work was to develop new late metal Ni(II)- and Pd(II)-based catalysts and processes to convert ethylene and other readily available α-olefins via polymerization and oligomerization reactions to an array of new value-added materials with high efficiency. An emphasis was placed on invention of new catalysts and processes guided by rational design and detailed mechanistic studies. These investigations have generated new knowledge which may underpin technological advances directed towards new and more efficient methods for utilizing ethylene and α-olefins derived from ethylene.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The U.S. STEP-TAS pilot

In January 2000, the STEP for Aerospace Workshop at JPL brought together representatives from the standards developer, tool vendors and user community. It served as the catalyst for further STEP implementation activities in NASA. The most mature of these activities is the US STEP-TAS pilot. The current status of this pilot and future plans are reported in this paper.

STEP-TAS model exchange thermal↗