Search NASA⌕ Search

SEARCH · Search NASA

Results for “correlation coefficient”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,657 records · Page 92

Properties of the gravity fields of terrestrial planets

The properties of the gravity fields of the earth, Mars, and Venus, as expressed by spherical harmonic coefficients, are examined, using the harmonic expansions of the respective planetary topographies reported by Balmino et al. (1973), Bills and Ferrari (1978), and Bills and Kobrick (1985). The items examined include the spectral magnitudes and slopes of the gravity coefficients; the correlations between gravity and topography; and the correlations among different gravity harmonics, expressed by axiality and angularity. It was found that Venus differs from the other two planets in its great apparent depths of compensation, indicating a tectonics dominated by a stiff upper mantle. In addition, Venus has less activity deep in the mantle than do earth or Mars. Mars is marked by large gravity irregularities, as well as by their axial symmetry on a global scale. Although earth is probably the most peculiar planet, spherical harmonics do not bring out its varied characteristics. It is clearly a more active planet than Venus, with activity deep in the mantle. The lower magnitude of its higher harmonics is considered to be due to water recycled to the upper mantle.

Kaula, William M.↗

Factors Affecting Laminar Boundary Layer Measurements in a Supersonic Stream

The observed discrepancy at supersonic speeds between theoretical and apparent experimental average flat plate friction-drag coefficients calculated from boundary layer total-pressure surveys was investigated. Effects of the total-pressure probe, heat transfer through the leading edge region, change in leading-edge radius and strength of the leading-edge wave, possible early transition to turbulent flow or “bursts of turbulence,” and the slight stream-wise pressure gradient inherent in flat plate flow were investigated for plates with very sharp leading edges. Only one of these factors, the effect of the total-pressure probe, was found to be significant. Total-pressure probes of different tip heights, when placed in laminar boundary layers developing under identical conditions, were found to yield different values of friction drag coefficient. Extrapolation of these measurements indicates that a probe of vanishing size would yield the theoretical predicted values of average flat plate friction-drag coefficients. A correlation describing the relation between the friction-drag discrepancy and the probe tip height is presented.

Blue, Robert E↗

Blade-to-coolant heat-transfer results and operating data from a natural-convection water-cooled single-stage turbine

Blade-to-coolant heat-transfer data and operating data were obtained with a natural-convection water-cooled turbine over range of turbine speeds and inlet-gas temperatures. The convective coefficients were correlated by the general relation for natural-convection heat transfer. The turbine data were displaced from a theoretical equation for natural convection heat transfer in the turbulent region and from natural-convection data obtained with vertical cylinders and plates; possible disruption of natural convection circulation within the blade coolant passages was thus indicated. Comparison of non dimensional temperature-ratio parameters for the blade leading edge, midchord, and trailing edge indicated that the blade cooling effectiveness is greatest at the midchord and least at the trailing edge.

COOLING - GAS TURBINE SYSTEMS↗

Simultaneous measurements of waves and precipitating electrons near the equator in the outer radiation belt

An investigation of wave-particle interactions is made using several simultaneous electron and wave measurements performed at near-equatorial positions from the Combined Release and Radiation Effects Satellite (CRRES) satellite. Bursts of electron precipitation were observed, most frequently at local times near dawn. Examples of bursts are presented in which the fluxes of the precipitating electrons and the wave intensities are correlated with coefficients as high as 0.7. During bursts the frequencies of the enhanced waves spanned a wide range from 311 Hz to 3.11 kHz, and the energies of the enhanced electrons were in the range 1.7 keV to 288 keV. The changes of the precipitating fluxes were generally less pronounced at the lowest energies. On the basis of electron-cyclotron resonant calculations using the cold plasma densities and ambient magnetic fields taken from the CRRES measurements it was found that the wave frequencies and precipitating electron energies were generally consistent with those expected from electron resonance with parallel propagating whistler waves. The electron data of principal concern here were acquired in and about the loss cone with narrow angular resolution spectrometers covering the energy range 340 eV to 5 MeV. The wave data included electric field measurements spanning frequencies from 5 Hz to 400 kHz and magnetic field measurements from 5 Hz to 10 kHz.

Imhof, W. L.↗

Development of a Generic Creep-Fatigue Life Prediction Model

The objective of this research proposal is to further compile creep-fatigue data of steel alloys and superalloys used in military aircraft engines and/or rocket engines and to develop a statistical multivariate equation. The newly derived model will be a probabilistic fit to all the data compiled from various sources. Attempts will be made to procure the creep-fatigue data from NASA Glenn Research Center and other sources to further develop life prediction models for specific alloy groups. In a previous effort [1-3], a bank of creep-fatigue data has been compiled and tabulated under a range of known test parameters. These test parameters are called independent variables, namely; total strain range, strain rate, hold time, and temperature. The present research attempts to use these variables to develop a multivariate equation, which will be a probabilistic equation fitting a large database. The data predicted by the new model will be analyzed using the normal distribution fits, the closer the predicted lives are with the experimental lives (normal line 1 to 1 fit) the better the prediction. This will be evaluated in terms of a coefficient of correlation, R 2 as well. A multivariate equation developed earlier [3] has the following form, where S, R, T, and H have specific meaning discussed later.

Goswami, Tarun↗

Predicting the Size of Sunspot Cycle 24 on the Basis of Single- and Bi-Variate Geomagnetic Precursor Methods

Examined are single- and bi-variate geomagnetic precursors for predicting the maximum amplitude (RM) of a sunspot cycle several years in advance. The best single-variate fit is one based on the average of the ap index 36 mo prior to cycle minimum occurrence (E(Rm)), having a coefficient of correlation (r) equal to 0.97 and a standard error of estimate (se) equal to 9.3. Presuming cycle 24 not to be a statistical outlier and its minimum in March 2008, the fit suggests cycle 24 s RM to be about 69 +/- 20 (the 90% prediction interval). The weighted mean prediction of 11 statistically important single-variate fits is 116 +/- 34. The best bi-variate fit is one based on the maximum and minimum values of the 12-mma of the ap index; i.e., APM# and APm*, where # means the value post-E(RM) for the preceding cycle and * means the value in the vicinity of cycle minimum, having r = 0.98 and se = 8.2. It predicts cycle 24 s RM to be about 92 +/- 27. The weighted mean prediction of 22 statistically important bi-variate fits is 112 32. Thus, cycle 24's RM is expected to lie somewhere within the range of about 82 to 144. Also examined are the late-cycle 23 behaviors of geomagnetic indices and solar wind velocity in comparison to the mean behaviors of cycles 2023 and the geomagnetic indices of cycle 14 (RM = 64.2), the weakest sunspot cycle of the modern era.

Wilson, Robert M.↗

Calibration Designs for Non-Monolithic Wind Tunnel Force Balances

This research paper investigates current experimental designs and regression models for calibrating internal wind tunnel force balances of non-monolithic design. Such calibration methods are necessary for this class of balance because it has an electrical response that is dependent upon the sign of the applied forces and moments. This dependency gives rise to discontinuities in the response surfaces that are not easily modeled using traditional response surface methodologies. An analysis of current recommended calibration models is shown to lead to correlated response model terms. Alternative modeling methods are explored which feature orthogonal or near-orthogonal terms.

Wind tunnel models↗

Measuring Total Column Water Vapor by Pointing an Infrared Thermometer at the Sky

A 2-year study affirms that the temperature (Tz) indicated by an inexpensive ($20 to $60) IR thermometer pointed at the cloud-free zenith sky provides an approximate indication of the total column water vapor (precipitable water or PW). PW was measured by a MICROTOPS II sun photometer. The coefficient of correlation (r2) of the PW and Tz was 0.90, and the rms difference was 3.2 mm. A comparison of the Tz data with the PW provided by a GPS site 31 km NNE yielded an r2 of 0.79, and an rms difference of 5.8 mm. An expanded study compared Tz from eight IR thermometers with PW at various times during the day and night from 17 May to 18 October 2010, mainly at the Texas site and 10 days at Hawaii's Mauna Loa Observatory (MLO). The best results of this comparison were provided by two IR thermometers models that yielded an r2 of 0.96 and an rms difference with the PW of 2.7 mm. The results of both the ongoing 2-year study and the 5-month instrument comparison show that IR thermometers can measure PW with an accuracy (rms difference/mean PW) approaching 10%, the accuracy typically ascribed to sun photometers.

Mims, Forrest M., III↗

Statistical Hypothesis Testing in Wavelet Analysis: Theoretical Developments and Applications to Indian Rainfall

Statistical hypothesis tests in wavelet analysis are methods that assess the degree to which a wavelet quantity(e.g., power and coherence) exceeds background noise. Commonly, a point-wise approach is adopted in which a wavelet quantity at every point in a wavelet spectrum is individually compared to the critical level of the point-wise test. However, because adjacent wavelet coefficients are correlated and wavelet spectra often contain many wavelet quantities, the point-wise test can produce many false positive results that occur in clusters or patches. To circumvent the point-wise test drawbacks, it is necessary to implement the recently developed area-wise, geometric, cumulative area-wise, and topological significance tests, which are reviewed and developed in this paper. To improve the computational efficiency of the cumulative area-wise test, a simplified version of the testing procedure is created based on the idea that its output is the mean of individual estimates of statistical significance calculated from the geometric test applied at a set of point-wise significance levels. Ideal examples are used to show that the geometric and cumulative area-wise tests are unable to differentiate wavelet spectral features arising from singularity-like structures from those associated with periodicities. A cumulative arc-wise test is therefore developed to strictly test for periodicities by using normalized arc length, which is defined as the number of points composing a cross section of a patch divided by the wavelet scale in question. A previously proposed topological significance test is formalized using persistent homology profiles (PHPs) measuring the number of patches and holes corresponding to the set of all point-wise significance values. Ideal examples show that the PHPs can be used to distinguish time series containing signal components from those that are purely noise. To demonstrate the practical uses of the existing and newly developed statistical methodologies, a first comprehensive wavelet analysis of Indian rainfall is also provided. An R software package has been written by the author to implement the various testing procedures.

Wind speed↗

Statistical Distribution of Gear Surface Fatigue Lives at High Reliability

The reliability of gears is important for a wide variety of applications, and the gearing community has a desire for better prediction of fatigue life at very high reliability. To improve predictions, a set of 950 NASA-conducted gear surface fatigue test results were gathered, pooled together using the general standardized Weibull variate, and then fit to a Weibull three-parameter distribution. An iterative fitting method was developed and then applied to the gear fatigue data to determine the values of the distribution parameters. Additional analyses were done using bearing and gear data that demonstrate a trend of increasing minimum life coefficient as correlated to the timeframe of the fatigue testing, and material cleanliness is proposed as a primary explanation for such correlation. It is noted that this observed trend supports published findings from analytical modeling and experimental studies that improvements to material cleanliness improves minimum fatigue life. Further use and study of the three-parameter Weibull distribution is recommended as a tool to quantify fatigue life most accurately in the high reliability regime.

gear↗

Modelling of Liquid Hydrogen No-Vent-Fill Tests Using Thermal Desktop

Efficient cryogenic propellant transfer is important to the success of upcoming NASA missions to the Moon and Mars. The no-vent-fill method is a promising approach that allows for simple low-loss propellant transfers over a wide range of ambient thermal and acceleration conditions. This approach has been previously studied in 3 separate experiments at NASA Glenn Research Center using liquid hydrogen in tanks ranging in volume from 34 to 5000 liters. Thermal/fluid models of the test subject tanks and supporting experimental hardware are developed using a Thermal Desktop twin-tank compartment approach. A key feature of the modelling is to replace the Thermal Desktop default values of liquid-vapor heat transfer coefficients with correlations from literature better chosen to match the fluid dynamics and phase change thermodynamics occurring in the tests. Details of the modelling effort and comparisons of model predictions to the NASA test datasets are presented and discussed.

Low Gravity Fluid Modeling↗

Considerations for AMI-Based Operations for Distribution Feeders: Preprint

More than $5 billion in investments in advanced metering infrastructure (AMI) technologies, AMI deployments, as pervasive secondary network voltage monitoring systems, provide opportunities for utility operations and controls. This paper focuses on the considerations for AMI-based tools and techniques as the industry moves toward operationalizing such large data sets. Phase identification is a first such tool. Numerous distribution network analysis, monitoring, and control applications - including volt/volt-ampere reactive control, state estimation, and distribution automation - require accurate phase connectivity information in the system models. The phase connectivity database maintained by utilities is inaccurate because of a significant amount of missing data, restoration activities, and network reconfiguration. Existing phase identification techniques that estimate phase connectivity work well in distribution feeders that have low or no photovoltaic (PV) generation; however, they fail to identify the phases accurately when considerable PV generation is present. This work addresses the phase identification problem in the presence of high PV generation using statistical analysis methods. Further, insights into the AMI data requirements for this application in terms of data window length and resolution are provided using sensitivity analysis performed on an actual distribution feeder model of San Diego Gas & Electric Company. The results of this study show that the phase connectivity, even in the presence of high PV generation, can be accurately identified using statistical analysis of AMI data of 1 day.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Predicting photovoltaic soiling losses using environmental parameters: An update

This study presents an investigation on the correlations between soiling losses and environmental parameters at 41 locations in the United States, with the aim of analyzing the possibility of predicting soiling losses at a site even when soiling data are not available. The results of this work, which considers the largest pool of soiling data points systematically investigated so far, confirm that a single-variable regression based on particulate matter concentration returns the best correlations with soiling, with adjusted coefficients of determination up to 70%, corresponding to RMSE as low as 0.9%. Among the various particulate matter datasets investigated, a gridded Environment Protection Agency dataset is for the first time found to return correlations similar to those obtained by interpolating particulate matter monitoring station data. We discuss in detail the different interpolation techniques used to process the particulate matter concentrations because they can greatly impact the correlations. Specifically, the correlation coefficients between soiling and particulate matter range between 70% and less than 20%, depending on the interpolation methods and monitoring distance. Spatial interpolation methods based on inverse distance weighting are found to return better correlations than a nearest neighbor or a simple average approach, especially when large distances are considered. Similarly, the effects of different rain thresholds used to calculate the length of the dry periods are examined. An enhanced two-variable regression is found to achieve higher-quality correlations, with adjusted R2 of 90% (RMSE = 0.55%), also suggesting that high and low soiling locations might be differentiated depending on fixed particulate matter or rainfall thresholds.

14 SOLAR ENERGY↗

High Throughput Coefficient Thermal Expansion Testing Utilizing Digital Image Correlation

Dr. Fitzgerald, a postdoc at Sandia National Laboratories, works in a materials of mechanics group characterizing material properties of ductile materials. Her presentation focuses specifically on increasing throughput of coefficient of thermal expansion (CTE) measurements with the use of optical strain measurements, called digital image correlation (DIC). Currently, the coefficient of thermal expansion is found through a time intensive process called dilatometry. There are multiple types of dilatometers. One type, a double push rod mechanical dilatometer, uses and LVDT to measure the expansion of a specimen in one direction. It uses a reference material with known properties to determine the CTE of the specimen in question. Testing about 500 samples using the double push rod mechanical dilatometer would take about 2 years if testing Monday through Friday, because the reference material needs to be at a constant temperature and heating must done slowly to ensure no thermal gradients across the rod. A second type, scissors type dilatometer, pinches a sample using a “scissor-like” appendage that also uses a LVDT to measure thermal expansion as the sample is heated. Finally, laser dilatometry, was created to provide a non-contact means to measure thermal expansion. This process greatly reduces the time required to setup a measurement but is still only able to measure one sample at a time. The time required to test 500 samples gets reduced to 3.5 weeks. Additionally, to measure expansion in different directions, multiple lasers must be used. Dr. Fitzgerald solved this conundrum by using an optical measurement technique called digital image correlation to create strain maps in multiple orientations as well as measuring multiple samples at once. Using this technique, Dr. Fitzgerald can test 500 samples, conservatively, in 2 days.

36 MATERIALS SCIENCE↗

The relationship between coefficient of restitution and state of charge of zinc alkaline primary LR6 batteries [Bouncing alkaline batteries: A basic solution]

The coefficient of restitution of alkaline batteries had been shown to increase as a function of depth of discharge. In this work, using non-destructive mechanical testing, the change in coefficient of restitution is compared to in situ energy-dispersive x-ray diffraction data to determine the cause of the macroscopic change in coefficient of restitution. The increase in coefficient of restitution correlates to the formation of a percolation pathway of ZnO within the anode of the cell, and that the coefficient of restitution saturates at a value of 0.63 ± .05 at 50% state if charge when the anode has densified into porous ZnO solid. Of note is the sensitivity of coefficient of restitution to the amount of ZnO formation that rivals the sensitivity on in situ energy-dispersive x-ray diffraction spectroscopy.

25 ENERGY STORAGE↗

Multitiered computational methodology for extracting three-dimensional rotational diffusion coefficients from x-ray photon correlation spectroscopy data without structural information

X-ray photon correlation spectroscopy (XPCS) is a powerful technique for analyzing particle systems by investigating their dynamics in suspensions across a broad range of temporal and spatial scales. This is done by illuminating samples with coherent x-ray beams and calculating the correlation function of the obtained x-ray scattering images. XPCS is uniquely suited for studying Brownian dynamics, consisting of translational and rotational diffusion. While traditional XPCS image analysis techniques can extract translational diffusion components, they are unable to estimate rotational diffusion coefficients. Here, we introduce a methodology that combines the angular-temporal cross-correlation analysis and a algorithmic framework called Multi-Tiered Estimation for Correlation Spectroscopy in 3D for estimating three-dimensional rotational diffusion coefficients from XPCS images of three-dimensional particle systems. We demonstrate our methodology for extracting rotational diffusion coefficients from XPCS data by applying it to simulated noisy x-ray images of systems of crossing nanotubes and proteins that evolve under translational and rotational Brownian motion for different diffusion rates. Furthermore, our results show that our approach determines rotational diffusion coefficients within a few percent error.

97 MATHEMATICS AND COMPUTING↗

Flow resolution and domain of influence in rarefied hypersonic blunt-body flows

The study assesses the effects of the upstream domain size and grid resolution upon flow properties and body aerodynamics computed for rarefied flows over cold blunt bodies with a direct simulation Monte Carlo (DSMC) particle method. Empirical correlations are suggested for aerodynamic coefficients for two-dimensional flows past a perpendicular flat plate. Free-stream parameters which were varied in the study include the Mach number, Knudsen number, surface temperature, and intermolecular potential. Insufficient grid resolution leads to overprediction of aerodynamic heating and forces in the DSMC method. Solution accuracy correlates well with the Reynolds number defined at the wall temperature and the stagnation mean free path relative to the cell dimension. Insufficient upstream domain size in the DSMC method leads to overprediction of heating and drag. Errors in aerodynamic coefficients correlate well with the distance ahead of the body where flow temperature reaches half of its peak value. Simulation of a hard-sphere gas is more sensitive to grid resolution, while simulation of a Maxwell gas is more sensitive to upstream domain size.

Haas, Brian L.↗