Search NASA⌕ Search

SEARCH · Search NASA

Results for “electronics analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,657 records · Page 92

Synthesis, characterization and properties of L-arginine-passivated silver nanocolloids

We investigate the effect of L-arginine-surface passivation on localised surface plasmon resonance (LSPR), size and stability of colloidal Silver Nanoparticles (AgNPs) synthesized by chemical reduction method. The surface Plasmon resonance absorption peak of AgNPs shows blue shift with the increase in L-arginine concentration. Transmission electron microscopy (TEM) analysis confirmed that the average size of AgNPs reduces from 10 nm to 6 nm as the concentration of L-Arginine increased from 1 to 5 mM. The X-ray diffraction study (XRD) confirmed the formation face-centred cubic (fcc) structured AgNPs. FT-IR studies revealed strong bonding between L-arginine functional groups and AgNPs.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Oxidation characteristics of gasoline direct-injection (GDI) engine soot: Catalytic effects of ash and modified kinetic correlation

In this paper, experimental analyses are conducted into the GDI soot oxidation characteristics as dependent on engine operating conditions. Soot is sampled at various engine operating conditions of a commercial 2.4 L GDI engine with a naturally aspirated, homogeneous, and stoichiometric operation strategy. The oxidation reactivity, ash composition, and carbon nanostructure of the GDI soot samples are analyzed using thermogravimetric analysis (TGA), scanning electron microscope–energy-dispersive spectroscopy (SEM-EDS), high-resolution transmission electron microscopy (HR-TEM), and Raman spectroscopy. Based on the analyses, a global GDI soot oxidation mechanism is proposed which includes the effects of soluble organic fractions (SOF)/weakly bonded carbon (WBC), and three types of ash on GDI soot oxidation. The results show that GDI soot contains an order of magnitude higher ash fraction than does conventional diesel soot, and oxidation reactivity is significantly enhanced by the catalytic effects of ash, as a function of ash content in soot. A modified empirical kinetic correlation for GDI soot oxidation is suggested on the basis of the results, and the modified kinetic correlation predicts the GDI soot oxidation rate accurately for various engine operation points at wide ranges of soot conversion and temperature without modifying kinetic parameters. The kinetic parameters are determined from isothermal and non-isothermal thremogravimetric analysis (TGA) soot oxidation tests; the methods are elucidated in detail.

33 ADVANCED PROPULSION SYSTEMS↗

Biodegradable Tragacanth Gum Based Silver Nanocomposite Hydrogels and Their Antibacterial Evaluation

In this article, biodegradable tragacanth gum (TG) biopolymer based silver nanocomposite hydrogels (SNCHs) were prepared with acrylamide as monomer using a simple redox polymerization method. TG acts as stabilizer to produce uniform and large silver nanoparticles (Ag-NPs) in presence of Terminalia chebula (TC) leaf extract in the hydrogel network. Forier transform infrared spectroscopy demonstrated the structural units of functional groups of polymeric backbone of the hydrogels. The formation of Ag-NPs in TG based hydrogels was confirmed by UV–Vis spectra. The morphology of homogeneously dispersed Ag-NPs throughout hydrogel networks was confirmed by scanning electron microscopy. TEM analysis indicates that Ag-NPs with average diameters of around 5 nm formed within the hydrogel networks. The evaluation of antibacterial activity of Ag-NPs performed against gram-negative Escherichia coli and gram-positive Bacillus subtilis bacteria and obtained results proved that these newly developed hydrogels have great potential for use in wound healing as well as water purification applications.

36 MATERIALS SCIENCE↗

Structural And Optical Study Of Er{sup 3+} In Sol-Gel Silicate Glass

The structural and optical properties of Er{sup 3+} doped with Al(NO{sub 3}){sub 3} sol-gel glass have been investigated. Thermo gravimetric analysis (TGA) shows an enormous mass loss between 40 deg. to 190 deg. C. Important structural changes on heating have been revealed by two endothermic peaks of Differential Thermal Analysis (DTA) which is further confirmed by Infra red (IR) spectroscopy and X-Ray Diffraction (XRD) analysis and Scanning Electron Micrograph of the sample heated to 800 deg. C suggests the particle size in nanometers. The oscillator strengths of the transitions in the absorption spectrum are parameterized in terms of three Judd-Ofelt (J.O) intensity parameters ({omega}{sub 2}, {omega}{sub 4} and {omega}{sub 6}). The radiative property for the potential lasing transition {sup 4}S{sub 3/2}{yields}{sup 4}I{sub 15/2} of Er{sup 3+} is found to be very encouraging for the studied glass.

36 MATERIALS SCIENCE↗

Generation and characterization of nano tungsten oxide particles by wire explosion process

Nano tungsten oxide particles are produced by wire explosion process. It is realized that by exploding tungsten conductor in lower pressure of oxygen, unreacted phase of tungsten was present and it could be reduced by increasing the operating pressure and increasing the amount of energy deposited to the exploding conductor. It is realized that the nucleation rate of the particle could be high only at the point of maximum saturation ratio, irrespective of the pressure of the oxygen. The size of the critical nucleus formed is low when the saturation ratio and the nucleation rate are at maximum. The nano metal oxide particle formation by wire explosion process allows one to conclude that the second stage annealing process has a major impact on the final grain size formed. The high speed camera photographs of wire explosion process were used to understand the dynamics of particle formation by wire explosion process. The Transmission Electron Microscopy (TEM) analysis indicates that the nano tungsten oxide (WO{sub 3}) particles are of spherical shape and the analysis of particle size indicates that it follows log normal distribution. - Graphical Abstract: Nano tungsten oxide (WO{sub 3}) particles are produced by wire explosion process. Theoretical analysis indicates that the size of the critical nucleus formed is low when the saturation ratio and the nucleation rate are at maximum. High speed camera photographs of wire explosion process were used to understand the dynamics of particles formed. Research Highlights: {yields}Lower particle size is possible with lower pressure. {yields}Particle size is increased with reduced energy ratio. {yields}Unreacted tungsten content reduces when oxygen pressure increases.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Structural and Optical Properties of Wurtzite AlGaAs Nanowires Grown by MBE on Si(111) Substrate

Abstract—: We present the results of photoluminescence measurements of Al{sub x}Ga{sub 1 – x}As nanowires, together with the transmission electron microscopy structural analysis. Al{sub x}Ga{sub 1 – x}As nanowires were grown by molecular beam epitaxy under the nominal aluminum contents х = 0.3–0.7. The obtained results demonstrate the presence of wurtzite structure in Al{sub x}Ga{sub 1 – x}As nanowires.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Post-irradiation examination to assess performance and safety of nuclear fuel

This work presents some results from testing campaigns performed at JRC-ITU on irradiated fuels and analogues aimed at characterizing fuel alterations during and after irradiation. The characterization of local structural and property changes is the first step towards the description of the overall behaviour of the fuel, including safety- and performance-relevant properties. High burnup light water reactor (LWR) UO{sub 2} fuel (= 60 GWd/tHM) was used for morphology and mechanical property studies. Radial profiles of porosity obtained from scanning electron microscopy image analysis were compared with corresponding sub-surface data obtained using acoustic microscopy. An increase of porosity was observed at the rim of the pellet in correspondence with the high burnup structure (HBS), and also at intermediate radius locations in correspondence with the occurrence of the so-called dark zone. This zone is characterized by several features similar to the HBS: in addition to increased local porosity, grain subdivision features were observed. The examination of grain free surface morphology along the pellet radius revealed the onset of surface alteration which resulted in almost complete loss of the original grain shape in conjunction with the formation of the dark zone. Additionally, possible ageing effects due to accumulation of microstructural decay damage during storage were investigated and compared to the results obtained under accelerated ageing conditions using alpha-doped analogues. Similar hardening trends were observed by comparing the hardness evolution as a function of accumulated damaged in unirradiated analogues and spent fuel. No significant hardness increase was observed on the same high burnup/high dose spent fuel after >10 years of additional storage in hot cell, confirming that hardening saturates at a damage level near 0.1 dpa. These experimental campaigns contribute establishing a basis of data for further analysis, in combination with suitable modelling tools. The final goal is to achieve the full scientific understanding of mechanisms and processes affecting fuel properties and behaviour, as a necessary step to establish the basis for developing advanced fuel systems with optimized performance and safety. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

The Effect of Weld Metal Composition on Microstructural and Mechanical Properties of Dissimilar Welds Between Monel 400 and Inconel 600

The current work was carried out to characterize welding of Inconel 600 superalloy and Monel 400. In the present study, gas tungsten arc welding (GTAW) with four types of filler metals (ENiCu, ENiCu-7, ENiCr-3 and ENiCrFe-3) was utilized. The filler metals were categorized into two groups based on the presence of Cr and Nb in their chemical composition. This paper describes the selection and application of welding consumables in manufacturing dissimilar metal combinations. It was found that (Nb/Cr) ratio and Fe content can affect on the size and amount of carbides. During solidification of ENiCr-3 and ENiCrFe-3 filler metals, Nb leaves dendritic cores and is rejected to inter-dendritic regions because of its high tendency for segregation. However, No brittle Laves phase was detected in the welds. The interface between weld metal and base metal and gradual changes in alloying elements were also investigated by scanning electron microscopy. EDX analysis was also applied for different samples. Microhardness measurements and tensile test were performed on the joints. The average hardness value in the weld metal obtained from ENiCrFe-3 is higher than the other welds. ENiCu-7 weld exhibited the highest tensile strength of 540 MPa and percent elongation of 53% in contrast to ENiCrFe-3 weld with the lowest tensile strength (518 MPa) and percent elongation (39%).

36 MATERIALS SCIENCE↗

Formation of phases in the films of a Ag-In-Se system

Processes of electron-diffraction structure analysis have been used to study the processes of phase formation and phase transitions in thin layers of a Ag-In-Se system. The phases formed at the onset of interaction between the films and phase transformations occurring during annealing of the samples in vacuum are established. It is found that thin films of the AgInSe{sub 2} compound formed as a result of simultaneous or consecutive deposition of components are amorphous, and crystallization brings about the formation of textured films with high structural quality

36 MATERIALS SCIENCE↗

Microwave assisted synthesis of nano sized sulphate doped hydroxyapatite

Highlights: ► Phase pure nano-sized sulphur doped hydroxyapatite has been synthesized. ► TEM analysis confirmed formation of needle shaped structure. ► Lattice parameters and cell volume increased with increase in sulphate doping. ► Crystallite size decreased as sulphate content inside the structure increased. ► Degree of crystallinity decreased with increase in sulphate substitution. - Abstract: Inorganic sulphate is required by all mammalian cells to function properly, it is the fourth most abundant anion in the human plasma. Sulphate ions are the major source of sulphur which is considered an important element for sustenance of life as it is present in the essential amino and is required by cells to function properly. In this study we have successfully substituted sulphate ions (SO{sub 4}{sup 2−}) into hydroxyapatite (Ca{sub 10}(PO{sub 4}){sub 6−x}(SO{sub 4}){sub x}(OH){sub 2−x}) lattice via ion exchange process with phosphate group. Concentration of SO{sub 4}{sup 2−} ions was varied between X = 0.05–0.5, using (Ca (NO{sub 3}){sub 2}·4H{sub 2}O), ((NH{sub 4}){sub 2}HPO{sub 4}) and (Na{sub 2}SO{sub 4}) as starting materials. X-ray diffraction (XRD), Fourier transform IR spectroscopy (FTIR), showed that the substitution of SO{sub 4}{sup 2−} ions into the lattice resulted in peak broadening and reduced peak height due to the amorphous nature and reduced crystallinity of the resulting HA powder. Transmission electron microscopy (TEM) and field emission electron microscopy (FESEM) analysis confirmed the formation of needle shaped particles of 41 nm size with homogenous and uniform distribution of element within the HA structure.

36 MATERIALS SCIENCE↗

Ultrasonic additive manufacturing of zirconium: Pilot results

Ultrasonic additive manufacturing (UAM) was successfully applied to the Zirconium material system to create a three-dimensional component prototype. The UAM process resulted in grain size refinement and significant localized deformation. Electron backscatter diffraction analysis revealed activated slip systems only applicable at high deformation temperatures, while texture analysis showed a decrease in measurable texture of the UAM build in comparison to the initial Zr-foil. Average tensile strengths in the X (sonotrode travel), Y (vibration), and Z (build) directions averaged 435 MPa, 458 MPa, and 359 MPa, respectively, demonstrating the viability of UAM for Zr-based materials. Furthermore, the delamination of some Z specimens along foil boundaries during loading suggests an interplay between interfacial Ti impurities introduced during welding and the spatial dependence of weld quality for this material system.

36 MATERIALS SCIENCE↗

Spin-State and Reorganization Energy Considerations for Metal-Centered Photoredox Catalysis

Transition-metal complexes featuring metal-centered excited states have recently emerged as mechanistically distinct platforms for selective photochemistry, including photoredox catalysis. Among these, Co(III) complexes have demonstrated productive photoinduced electron transfer via the 3 T 1 metal-centered state. In contrast, photoreactivity from the 5 T 2 metal-centered state in Fe(II) polypyridyl complexes remains limited. Building on our prior report concerning reactivity associated with the 5 T 2 state in [Fe(tren(py) 3 )] 2+ (tren(py) 3 = tris(2-pyridylmethyliminoethyl)-amine), we introduced stronger-field ligands in an effort to increase excited-state energies of Fe(II) polypyridyl complexes and enhance reactivity. Despite achieving nanosecond-scale excited-state lifetimes and favorable thermodynamic driving forces, no photoreactivity was observed. Reinvestigation of the observations previously reported for [Fe(tren(py) 3 )] 2+ revealed interactions between the metal complex and the substrate in their respective ground states that mimicked dynamic quenching of the chromophore, prompting a reassessment of mechanistic considerations inherent in leveraging reductive chemistry from the 5 T 2 excited state of Fe(II). Our analysis indicates that electron transfer from the 5 T 2 excited state of a low-spin d6 metal is subject to significant barriers both in terms of reorganization energies and spin conservation that undermines its ability to act as an electron donor for photoredox catalysis. In contrast, ligand fields that are sufficient to stabilize the 3 T 1 excited state have available to them numerous spin-allowed and, in certain cases, near-barrierless pathways to engage in excited-state electron transfer (both oxidative and reductive depending on the identity of the metal). These results highlight the critical role of spin-state changes and their associated reorganization energy requirements in metal-centered photoredox catalysis.

charge transfer↗

Polyethylene glycol (PEG) assisted size-controlled SnO{sub 2} nanoparticles by sol-gel process

Tetragonal phase tin oxide (SnO{sub 2}) nanoparticles have been synthesized by sol–gel method using SnCl{sub 4}.5H{sub 2}O and polyethylene glycol (PEG) of different concentration. The phase, size and purity of the final products are characterized by X-ray diffraction (XRD). The morphology is confirmed by scanning electron microscopy (SEM) analysis. There exists relationship between the concentration of PEG and particle size of SnO{sub 2} nanoparticles. Increase in concentration of PEG caused the reduction of particle size of tin oxide nanoparticles. The results suggest that the concentration of PEG plays a significant role in determining the size of SnO{sub 2} nanoparticles synthesized via this method. The optical property of the product has been explored by Ultraviolet (UV-visible) and Fourier Transform Infrared (FTIR) spectroscopic techniques.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Experimental Study on Heat Transfer and Pressure Drop of In-House Synthesized Graphene Oxide Nanofluids

In this work, first, graphene oxide nanosheets were synthesized in-house according to the modified Hummers method, and these nanosheets were used to prepare graphene oxide nanofluids at two concentrations. Then the thermo-physical properties of nanofluids characterized using X-ray diffraction analysis, a scanning electron microscope, and UV-Vis spectrophotometry. The particle size distribution was investigated using dynamic light scattering. Then, a fundamental study was conducted on the thermal-hydraulic characteristics of graphene oxide nanofluids flowing through a straight copper tube. An experimental setup was developed to find the heat transfer characteristics and pressure drop of nanofluids in the test section consisting of a copper tube with constant heat flux. The flow regimes and associated pressure drop and heat transfer characteristics at varying flow rate were investigated at three different heat flux conditions of 7.4, 9.1, and 12.6 kW/m 2 . Due to the increase in viscosity, flowrate and Reynolds number decreased from 0.01 wt.% to 0.1 wt.% of graphene oxide nanofluids at constant pump frequency. Experimental data obtained for water was validated with the findings from the literature, and the correlations were formulated for the Nusselt number and Reynolds number by considering the multiple regression analysis. The convective heat transfer coefficient for graphene oxide at 0.01 wt.% was higher when compared to graphene oxide at 0.1 wt.% and water. Finally, the variation of Nusselt number with the heat flux and velocity was insignificant.

36 MATERIALS SCIENCE↗

Plasmodium falciparum signal peptide peptidase cleaves malaria heat shock protein 101 (HSP101). Implications for gametocytogenesis

Highlights: • PfSPP is an ER resident protease. • PfSPP is expressed both as a monomer and dimer. • The signal peptide of HSP101 is the first known substrate of PfSPP. • Reduced PfSPP activity may significantly affect ER homeostasis. - Abstract: Previously we described the identification of a Plasmodium falciparum signal peptide peptidase (PfSPP) functioning at the blood stage of malaria infection. Our studies also demonstrated that mammalian SPP inhibitors prevent malaria parasite growth at the late-ring/early trophozoite stage of intra-erythrocytic development. Consistent with its role in development, we tested the hypothesis that PfSPP functions at the endoplasmic reticulum of P.falciparum where it cleaves membrane-bound signal peptides generated following the enzyme activity of signal peptidase. The localization of PfSPP to the endoplasmic reticulum was confirmed by immunofluorescence microscopy and immunogold electron microscopy. Biochemical analysis indicated the existence of monomer and dimer forms of PfSPP in the parasite lysate. A comprehensive bioinformatics screen identified several candidate PfSPP substrates in the parasite genome. Using an established transfection based in vivo luminescence assay, malaria heat shock protein 101 (HSP101) was identified as a substrate of PfSPP, and partial inhibition of PfSPP correlated with the emergence of gametocytes. This finding unveils the first known substrate of PfSPP, and provides new perspectives for the function of intra-membrane proteolysis at the erythrocyte stage of malaria parasite life cycle.

60 APPLIED LIFE SCIENCES↗

Effect of TiN Addition on 3Y-TZP Ceramics with Emphasis on Making EDM-Able Bodies

In this study, to produce electrically conductive ceramics, rapid hot press (RHP) sintering of 3 mol.% yttria-stabilized tetragonal zirconia polycrystal (3Y-TZP) and 3Y-TZP/TiN composites with TiN amounts of 25, 35, and 45 vol.% was performed at 1300, 1350, and 1400 °C. Interestingly, the toughness and hardness were improved in the presence of TiN up to 35 vol.% and maximum fracture toughness and hardness of 5.40 ± 0.05 MPa m{sup 1/2} and 14.50 ± 0.06 GPa, respectively, were obtained. However, the bending strength was decreased which could be attributed to the rather weak interfaces of nitride and oxide phases. Regarding the zirconia matrix, the effect of grain size on fracture toughness of the samples has been studied using x-ray diffraction and field emission scanning electron microscope (FESEM) analysis. It was also found that electrical resistivity decreased to the value of 6.88 × 10{sup −6} Ω m at 45 vol.% of TiN. It seems the TiN grains form a network to impose conductivity on the ZrO{sub 2} body; however, below 35 vol.% TiN, due to lack of percolation effect, this conductivity could not be maintained according to FESEM studies. Finally, electrically conductive samples were successfully machined by electrical discharge machining (EDM).

36 MATERIALS SCIENCE↗

Microstructure heterogeneity after the ECAP process and its influence on recrystallization in aluminium

The main purpose of the present work is to describe the qualitative and quantitative behaviours of aluminium during high strain plastic deformation and the effect of deformation on the subsequent recrystallization process. An Electron Backscatter Diffraction analysis of aluminium after the Equal channel angular pressing (ECAP) and recrystallization process is presented. In order to do this, several topological maps are measured for samples processed by 4 and 8 passes and recrystallized. The processing was conducted with route C. For all samples, distributions of grain size, misorientation, image quality factor (IQ) and texture were preceded and then analysed in some detail. - Highlights: ► Describe the microstructure fragmentation in aluminum. ► High strain plastic deformation and effect of deformation on recrystallization. ► The microstructure fragmentation and its influence on recrystallization. ► Image quality factor and misorientation characteristics are examined using EBSD.

36 MATERIALS SCIENCE↗

CLEERS Aftertreatment Modeling and Analysis

DOE FY 2011 Advanced Combustion Technologies Annual Report. CLEERS is a research and development focus project of the Diesel Cross-Cut Team. The overall objective is to promote the development of improved computational tools for simulating realistic full-system performance of lean-burn engines and the associated emissions control systems. Three fundamental research projects are sponsored at PNNL through CLEERS: DPF, SCR, and LNT. Resources are shared between the three efforts in order to actively respond to current industrial needs. In FY 2011, more emphasis was placed on the SCR and LNT activities because of urgent application issues associated with these technologies. Objectives of this project are to lead and contribute to the Cross-Cut Lean Exhaust Emissions Reduction Simulations (CLEERS) activities - (a) Provide project updates to the industry sub-team, solicit feedback, and adjust work scope accordingly; and (b) Lead technical discussions, invite distinguished speakers, and maintain an open dialogue on selective catalytic reduction (SCR), lean-NOx trap (LNT), and diesel particulate filter (DPF) modeling issues. Fiscal Year (FY) 2011 Objectives are to: (1) Develop improved modeling capabilities for SCR and DPFs through fundamental experiments; and (2) Develop a fundamental understanding of SCR and LNT catalysts with primary focus on reaction mechanisms and material characterization. Some accomplishments are: (1) Participated in monthly CLEERS teleconferences and coordinated the calls focused on SCR, LNT and DPF technologies; (2) Updated PNNL's SCR model for the state-of-the-art commercial Cu-zeolite SCR catalyst to extract kinetic parameters and to quantitatively describe the effects of hydrothermal aging; (3) Examined the effects of hydrothermal aging on the physicochemical properties and SCR reactions using the commercial Cu catalyst in collaboration with Oak Ridge National Laboratory (ORNL); (4) Investigated the nature of Cu species and obtained kinetic parameters for small-pore zeolite-based Cu SCR catalyst. (5) Examined the effects of support materials for Ba-based LNT catalysts, and found magnesium aluminate may improve the oxides of nitrogen (NO{sub x}) reduction performance at high temperatures; (6) Investigated soot oxidation mechanisms for relevant oxidants (O{sub 2}, NO{sub 2}) through reactor experiments and transmission electron spectroscopy (TEM) analysis; (7) Seven publications and 21 public presentations (eight invited) during the past FY; and (8) Co-organized sessions on emission control and modeling for the SAE World Congress and the American Society of Mechanical Engineers Internal Combustion Engine Conference.

33 ADVANCED PROPULSION SYSTEMS↗