Search NASA⌕ Search

SEARCH · Search NASA

Results for “matrix sampling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,657 records · Page 92

A Study of Space Environment Effect on Highly Thermally Conductive Hybrid Carbon Fiber Polymer Composites

A set of novel highly thermally conductive hybrid carbon fiber (CF) polymer composites has been developed for lightweight thermal radiator applications in space missions. This study investigates the effects of the space environment on these materials following exposure in low-Earth orbit (LEO) during the Materials International Space Station Experiment (MISSE)-17 flight mission, where samples experienced 159 days of combined atomic oxygen (AO), ultraviolet (UV) radiation, high vacuum, space radiation and thermal cycling. Post-flight characterization included weight loss, surface morphology, thermo-optical properties, molecular structures, glass transition temperature, thermal degradation and thermal conductivity analyses. The pyrolytic graphite sheet (PGS) samples exhibited negligible weight loss, stable thermo-optical property, and only minor oxidation signature on the exposed surface. Although AO erosion of the epoxy polymer matrix was evident, carbon nanotube (CNT)-infused PGS/CF epoxy composites retained high thermal emissivity and preserved their high thermal conductivities. These results demonstrate that the novel highly thermally conductive hybrid CF composites possess strong environmental resilience and are promising candidates for lightweight thermal radiators and thermal management components in future space exploration missions.

Space Environment↗

Characterizing a High-Level Waste Cold Cap via Elemental and Structural Configuration

The process of converting high-level waste feed to an immobilized glass form takes place within a cold cap which covers a high-temperature (1150°C) glass melt in a Joule or induction heated melter. Liquid slurry feed is continuously charged through the top of a melter. Within the cold cap, many glass forming reactions occur and the glass-forming melt becomes connected. Gases trapped in the glass-forming melt arrange into bubbles which create a layer of foam below the reacting feed that collapses into cavities. This foam layer thermally insulates the reacting feed limiting heat transfer from the molten glass below, thus affecting the rate of glass formation. Information about the glass formation is desired for incorporation in a mathematical model designed to simulate the melting in a cold cap. To explore this, a set of high-level waste feed simulant samples were heat-treated at 5 K min-1 to temperatures ranging from 400°C to 1200°C for comparison with cold cap sections generated in a laboratory-scale melter. To estimate the temperature distribution in laboratory-produced cold caps, structural (bubble size and shape) and optical (color) properties of heat-treated samples and cold-cap sections were compared along with elemental maps, the shapes and sizes of the silica particles, and the connectivity of the glass matrix. These results will be used to verify the recently developed mathematical model of the cold-cap.

Cold Cap↗

International Perspective on the Application of Non-Destructive Assay Technology Platforms for Sentencing and Disposal of Radioactive Waste - 12113

Over the past decade, major technology improvements have been introduced in the field of Non-Destructive Assay (NDA) for the management and disposal of radioactive waste in compliance with an evolving regulatory structure. For example in the United States, various NDA technologies have been successfully developed to meet the stringent characterization requirements of the Department of Energy. The use of this instrumentation, combined with the compliant operational processes and expertise levels that have emerged in parallel, have enabled over 75,000 m{sup 3} (or in excess of 145,000 containers) of contact and remote handled transuranic (TRU) waste to be sentenced to date to the Waste Isolation Pilot Plant from 10 different consignor sites. Many of these techniques have applicability that transcends national borders and can be used for common characterization challenges in waste sentencing and disposal on an international basis. Applicable waste streams could include LLW, ILW, TRU and HLW. There are specific design aspects of assay equipment that must be tailored to meet the applicable regulatory requirements for detection and quantification of a set of nuclides of interest to a prescribed limit of detection and measurement uncertainty. Each host nation will have specific challenges in the form of matrix types and processes, availability of historical information, needs for portable versus fixed instruments and the requirement to measure all containers versus assay of a representative sample. Furthermore, the practice of load management (combining smaller packages into a larger package designed to meet the overall waste acceptance criteria for the bulk container) may not have universal acceptability. An evaluation has been performed on a sample of the most successful technologies that have recently emerged to understand their applicability in other countries. Two types of instrumentation 'suite' are considered for measurements on drums and larger boxes / crates: (i) High Efficiency Neutron Coincidence counting combined with gamma isotopic analysis (e.g. the SuperHENC), and (ii) Portable NDA using neutron slab counters and far field high resolution gamma spectroscopy. Target countries (outside the United States) for these applications are: China, Japan, UK, Sweden and Canada. Specific challenges in each country are addressed and the applicability of the technologies as 'universal platforms' is considered. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

"Hybrid fracture/matrix modeling for well completion options evaluation"

Orientation and completion for well pairs that have been subjected to multi-zonal stimulation play a critical role in the long-term performance of an Enhanced Geothermal Reservoir. Here we present the development of a methodology to rapidly and efficiently numerically simulate mixed fracture-matrix flow systems for evaluation of well design and completion options. The methodology is based on a loose coupling framework, allowing the fracture and matrix systems to be meshed separately. The fracture system includes the integration of fracture growth and aperture data from well stimulation simulations of stochastically generated fracture networks. Automatic mesh refinement is used in the matrix simulation to resolve heat transfer near the fracture network. This simulation framework is used to efficiently determine optimal production and injection well placement using adaptive sampling.

15 GEOTHERMAL ENERGY↗

Effect of high-energy electron irradiation in an electron microscope column on fluorides of alkaline earth elements (CaF{sub 2}, SrF{sub 2}, and BaF{sub 2})

The effect of high-energy (150 eV) electron irradiation in an electron microscope column on crystals of fluorides of alkaline earth elements CaF{sub 2}, SrF{sub 2}, and BaF{sub 2} is studied. During structural investigations by electron diffraction and electron microscopy, the electron irradiation causes chemical changes in MF{sub 2} crystals such as the desorption of fluorine and the accumulation of oxygen in the irradiated area with the formation of oxide MO. The fluorine desorption rate increases significantly when the electron-beam density exceeds the threshold value of {approx}2 Multiplication-Sign 10{sup 3} pA/cm{sup 2}). In BaF{sub 2} samples, the transformation of BaO into Ba(OH){sub 2} was observed when irradiation stopped. The renewal of irradiation is accompanied by the inverse transformation of Ba(OH){sub 2} into BaO. In the initial stage of irradiation of all MF{sub 2} compounds, the oxide phase is in the single-crystal state with a lattice highly matched with the MF{sub 2} matrix. When the irradiation dose is increased, the oxide phase passes to the polycrystalline phase. Gaseous products of MF{sub 2} destruction (in the form of bubbles several nanometers in diameter) form a rectangular array with a period of {approx}20 nm in the sample.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Mechanical & morphological properties of attapulgite/NR composites: Effect of mixing time variation

The development of composite material based on attapulgite clay (ATP) as a filler and natural rubber (NR) matrices were prepared by combination of melt mixing and latex compounding methods. Sonication technique was chosen in this work to disperse the attapulgite suspension. 6 phr of attapulgite loading was fabricated using different time of mixing ranging from 30 minutes until 2 hours and sonication time was kept constant at 15 minutes. Then, co-coagulating HA latex with attapulgite clay suspension through latex compounding method produced the masterbatch. The masterbatch was compounded with natural rubber by melt mixing method. The mechanical and morphological characteristics were investigated in this work. From mechanical testing, M1 showed the highest value of tensile and tear strength. By comparing with M30 and M2, M1 shows high 300% tensile modulus and lower crosslink density. However, when the time of mixing was prolonged to 2 hours, the results for tensile strength, elongation at break and tear strength were decreased. This is due to flocculation of attapulgite particles. Sonication techniques also proved that the tensile strength and elongation at break of these three samples were higher compared to gum NR (NR) and attapulgite compounded with NR using a conventional method (in-situ 6). From field emission scanning electron microscope (FESEM) results, it revealed that M1 had good dispersion in the NR system. It is proved that the higher tensile strength was due to good dispersion of attapulgite clay in the NR matrix. It was also supported from crosslink density, which is lower than NR and in-situ 6 results. It showed that the penetration of toluene solvent into rubber compound was restricted. The optimum time, M1 give the best results, which can be compared to control the sample.

36 MATERIALS SCIENCE↗

Deep UV Native Fluorescence Imaging of Antarctic Cryptoendolithic Communities

An interdisciplinary team at the Jet Propulsion Laboratory Center for Life Detection has embarked on a project to provide in situ chemical and morphological characterization of Antarctic cryptoendolithic microbial communities. We present here in situ deep ultraviolet (UV) native fluorescence and environmental scanning electron microscopy images transiting 8.5 mm into a sandstone sample from the Antarctic Dry Valleys. The deep ultraviolet imaging system employs 224.3, 248.6, and 325 nm lasers to elicit differential fluorescence and resonance Raman responses from biomolecules and minerals. The 224.3 and 248.6 nm lasers elicit a fluorescence response from the aromatic amino and nucleic acids. Excitation at 325 nm may elicit activity from a variety of biomolecules, but is more likely to elicit mineral fluorescence. The resultant fluorescence images provide in situ chemical and morphological maps of microorganisms and the associated organic matrix. Visible broadband reflectance images provide orientation against the mineral background. Environmental scanning electron micrographs provided detailed morphological information. The technique has made possible the construction of detailed fluorescent maps extending from the surface of an Antarctic sandstone sample to a depth of 8.5 mm. The images detect no evidence of microbial life in the superficial 0.2 mm crustal layer. The black lichen component between 0.3 and 0.5 mm deep absorbs all wavelengths of both laser and broadband illumination. Filamentous deep ultraviolet native fluorescent activity dominates in the white layer between 0.6 mm and 5.0 mm from the surface. These filamentous forms are fungi that continue into the red (iron-rich) region of the sample extending from 5.0 to 8.5 mm. Using differential image subtraction techniques it is possible to identify fungal nuclei. The ultraviolet response is markedly attenuated in this region, apparently from the absorption of ultraviolet light by iron-rich particles coating the filaments. Below 8.5 mm the filamentous morphology of the upper layers gives way to punctate 1-2 micron particles evidencing fluorescent activity following excitation at both deep ultraviolet wavelengths.

Storrie-Lombardi, M. C.↗

Top Quark Mass Measurement Using a Matrix Element Method with Quasi-Monte Carlo Integration

We report an updated measurement of the top quark mass obtained from ppbar collisions at sqrt(s) = 1.96 TeV at the Fermilab Tevatron using the CDF II detector. Our measurement uses a matrix element integration method to obtain a signal likelihood, with a neural network used to identify background events and a likelihood cut applied to reduce the effect of badly reconstructed events. We use a 2.7 fb{sup -1} sample and observe 422 events passing all of our cuts. We find m{sub t} = 172.2 +/- 1.0 (stat.) +/- 0.9 (JES) +/- 1.0 (syst.) GeV/c{sup 2}, or m{sub t} = 172.2 +/- 1.7 (total) GeV/c{sup 2}.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Enhanced magnetostrictive effect in epoxy-bonded Tb{sub x}Dy{sub 0.9−x}Nd{sub 0.1}(Fe{sub 0.8}Co{sub 0.2}){sub 1.93} pseudo 1–3 particulate composites

The spin configuration and spontaneous magnetostriction λ{sub 111} of Tb{sub x}Dy{sub 0.9−x}Nd{sub 0.1}(Fe{sub 0.8}Co{sub 0.2}){sub 1.93} (0.20 ≤ x ≤ 0.60) alloys have been investigated. The easy magnetization direction (EMD) at room temperature was observed towards the 〈111〉 axis when 0.40 ≤ x ≤ 0.60, accompanied by a rhombohedral distortion with large spontaneous magnetostriction coefficients λ{sub 111}, which increases from 1640 ppm for x = 0.40 to 1900 ppm for x = 0.60. The strong 〈111〉-oriented pseudo 1–3 particulate composite was fabricated by embedding and aligning particles in a passive epoxy matrix under an applied magnetic field. An enhanced magnetostrictive effect, the large low-field magnetostriction, λ{sub a}, as high as 480 ppm at 3 kOe, was obtained for the sample of x = 0.40, in an excess of 75% of its polycrystalline alloy although it only contains 27 vol. % alloy particles. This enhanced effect can be attributed to its low magnetic anisotropy, anisotropic magnetostrictive nature (e.g., λ{sub 111} ≠ λ{sub 100,} 〈111〉EMD), chain structure, and the 〈111〉-textured orientation. In addition, we give a direct experimental support that the 〈111〉EMD of particle and the strong 〈111〉-textured orientation are the crucial factors to realize the enhanced magnetostrictive effect in 1–3 particulate composites.

36 MATERIALS SCIENCE↗

Density-Matrix Based Extended Lagrangian Born–Oppenheimer Molecular Dynamics

Extended Lagrangian Born–Oppenheimer molecular dynamics [ Phys. Rev. Lett. 2008, 100, 123004] is presented for Hartree–Fock theory, where the extended electronic degrees of freedom are represented by a density matrix, including fractional occupation numbers at elevated electronic temperatures. In contrast to regular direct Born–Oppenheimer molecular dynamics simulations, no iterative self-consistent field optimization is required prior to the force evaluations. To sample regions of the potential energy landscape where the gap is small or vanishing, which leads to particular convergence problems in regular direct Born–Oppenheimer molecular dynamics simulations, an adaptive integration scheme for the extended electronic degrees of freedom is presented. The integration scheme is based on a tunable, low-rank approximation of a fourth-order kernel, K, that determines the metric tensor, T ≡ K T K, used in the extended harmonic oscillator of the Lagrangian that generates the dynamics of the electronic degrees of freedom. Here, the formulation and algorithms provide a general guide to implement extended Lagrangian Born–Oppenheimer molecular dynamics for quantum chemistry, density functional theory, and semiempirical methods using a density matrix formalism.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Measurements of B to V(Gamma) Decays

The standard model has been highly successful at describing current experimental data. However, extensions of the standard model predict particles that have masses at energy scales that are above the electroweak scale. The flavor-changing neutral current processes of the B meson are sensitive to the influences of these new physics contributions. These processes proceed through loop diagrams, thus allowing new physics to enter at the same order as the standard model. New physics may contribute to the enhancement or suppression of rate asymmetries or the decay rates of these processes. The transition B {yields} V{gamma} (V = K*(892), {rho}(770), {omega}(782), {phi}(1020)) represents radiative decays of the B meson that proceed through penguin processes. Hadronic uncertainties limit the theoretical accuracy of the prediction of the branching fractions. However, uncertainties, both theoretical and experimental, are much reduced when considering quantities involving ratios of branching fractions, such as CP or isospin asymmetries. The most dominant exclusive radiative b {yields} s transition is B {yields} K*{gamma}. We present the best measurements of the branching fractions, direct CP, and isospin asymmetries of B {yields} K*{gamma}. The analogous b {yields} d transitions are B {yields} {rho}{gamma} and B {yields} {omega}{gamma}, which are suppressed by a factor of |V{sub td}/V{sub ts}|{sup 2} {approx} 0.04 relative to B {yields} K*{gamma}. A measurement of the branching fractions and isospin asymmetry of B{sup +} {yields} {rho}{sup +}{gamma} and B{sup 0} {yields} {rho}{sup 0}{gamma}, as well as a search for B {yields} {omega}{gamma}, are also given. These measurements are combined to calculate the ratio of CKM matrix elements |V{sub td}/V{sub ts}|, which corresponds to the length of one side of the unitary triangle. Finally, we present a search for the penguin annihilation process B {yields}{phi}{gamma}. We use a sample of 383 million B{bar B} events collected with the BABAR detector at the PEP-II asymmetric-energy B factory for the analysis of B {yields} K*{gamma}. We measure the branching fractions {Beta}(B{sup 0} {yields} K*{sup 0}{gamma}) = (4.47 {+-} 0.10 {+-} 0.16) x 10{sup -5} and {Beta}(B{sup +} {yields} K*{sup +}{gamma}) = (4.22 {+-} 0.14 {+-} 0.16) x 10{sup -5}. We measure the direct CP asymmetry to be -0.033 < {Alpha}{sub CP} (B {yields} K*{gamma}) < 0.028 and the isospin asymmetry to be 0.017 < {Delta}{sub 0-} < 0.116, where the limits are determined at the 90% C.L. and include both the statistical and systematic uncertainties. Using a sample of 347 million B{bar B} events, we measure the branching fractions {Beta}(B{sup +} {yields} {rho}{sup +}{gamma}) = (1.10{sub -0.33}{sup +0.37} {+-} 0.09) x 10{sup -6} and {Beta}(B{sup 0} {yields} {rho}{sup 0}{gamma}) = (0.79{sub -0.20}{sup +0.22} {+-} 0.06) x 10{sup -6}, the isospin asymmetry {Delta} = -0.35 {+-} 0.27, and set a 90% C.L. upper limit {Beta}(B {yields} {omega}{gamma}) < 0.78 x 10{sup -6}. We also measure the isospin-averaged branching fraction {Beta}(B {yields} ({rho}/{omega}){gamma}) = (1.25{sub -0.24}{sup +0.25} {+-} 0.09) x 10{sup -6}, from which we determine |V{sub td}/V{sub ts}|= 0.200{sub -0.020}{sup +0.021} {+-} 0.015, where the first uncertainty is experimental and the second theoretical. Finally, a sample of 124 million B{bar B} events is used to set an upper limit of {Beta}(B {yields} {phi}{gamma}) < 8.5 x 10{sup -7} at the 90% C.L.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Improved silicon carbide for advanced heat engines

This is the third annual technical report for the program entitled, Improved Silicon Carbide for Advanced Heat Engines, for the period February 16, 1987 to February 15, 1988. The objective of the original program was the development of high strength, high reliability silicon carbide parts with complex shapes suitable for use in advanced heat engines. Injection molding is the forming method selected for the program because it is capable of forming complex parts adaptable for mass production on an economically sound basis. The goals of the revised program are to reach a Weibull characteristic strength of 550 MPa (80 ksi) and a Weibull modulus of 16 for bars tested in 4-point loading. Two tasks are discussed: Task 1 which involves materials and process improvements, and Task 2 which is a MOR bar matrix to improve strength and reliability. Many statistically designed experiments were completed under task 1 which improved the composition of the batches, the mixing of the powders, the sinter and anneal cycles. The best results were obtained by an attritor mixing process which yielded strengths in excess of 550 MPa (80 ksi) and an individual Weibull modulus of 16.8 for a 9-sample group. Strengths measured at 1200 and 1400 C were equal to the room temperature strength. Annealing of machined test bars significantly improved the strength. Molding yields were measured and flaw distributions were observed to follow a Poisson process. The second iteration of the Task 2 matrix experiment is described.

Whalen, Thomas J.↗

Microstructure Optimization of Austenitic Alloy 800H (Fe-21Cr-32Ni)

The microstructural evolution, specifically of grain boundaries, precipitates, and dislocations in thermomechanically processed (TMP) Alloy 800H samples was characterized by scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), electron backscattered diffraction (EBSD), transmission electron microscopy (TEM), and atomic force microscopy (AFM). The TMP not only significantly increased the fraction of low-{Sigma} coincidence site lattice boundaries, but also introduced nanoscale precipitates in the matrix and altered the distribution of dislocations. Statistical analysis indicates that the morphology and distribution of grain boundary precipitates were dependent on grain boundary types. The microstructure optimization played a synergistic effect on the significantly increased strength with comparable ductility and enhanced intergranular corrosion resistance and creep-fatigue life compared to the as-received samples.

36 MATERIALS SCIENCE↗

Low-Cost, High-Performance Carbon Fiber for Compressed Natural Gas Storage Tanks (Final Technical Report – Down Select Report)

The aim of this project is to reduce the cost of Type IV, carbon fiber (CF) composite overwrap compressed gas storage tanks by reducing the cost of CF and CF composites. The project team worked to reduce the cost of CF by exploring and testing opportunities for a low-cost alternative precursor material for CF production to supplant market-dominant and costly polyacrylonitrile (PAN). Concurrently, the team aimed to reduce the cost of the tanks at the composite level by improving the interfacial adhesion between the fibers and the matrix resin through the incorporation of low-cost nanoparticles recycled from waste materials, which would reduce the volume of costly CF required to achieve the same tank performance. At the end of the first year, the project team selected mesophase pitch as the primary precursor candidate from a field of materials based on the superior mechanical performance and cost-saving potential. During the second year, the team produced CFs derived from mesophase pitch achieving an average tensile strength of 365.6 ksi and average tensile modulus of 40.74 Msi. Facility availability for spinning and converting these fibers at greater scale has hindered scale-up demonstration, but the team has identified opportunities to conduct this work in the near term. Cost modeling shows that these mesophase pitch-derived CFs can be up to 40% less expensive than PAN-derived CFs due to the lower cost of the feedstock material, higher throughput, greater conversion yield, and lower cost spinning method and compared to PAN. Additionally, the team has demonstrated at lab-scale that nanoparticle coating CFs can significantly increase the interfacial shear strength and load transfer efficiency of CFs in a matrix. Single filament pull-out testing showed a 27% average increase in max interfacial shear strength due to this coating. A continuous method of applying these coatings to a tow of CF has been developed for scale-up. 26 m tows of coated CFs were produced using this system and formed into composite ring samples for ASTM ring burst testing. Issues with the testing protocol have limited assessment of these results. A prototype Type IV tank was designed to meet ANSI HGV2 standards, and the design criteria set out by DOE, using the CF properties developed by the team paired with a proprietary resin matrix, a polyamide liner, and aluminum end bosses. The tank weighs 153.1 kg and with a total capacity of 5.8 kg H2 (5.6 kg usable), which yields a gravimetric capacity of 1.17 kWh/kg. Cost modeling predicts that the tank will have a projected cost of $15.73/kWh. Tank performance modeling does not include considerations for fiber-matrix load transfer efficiency improvements offered by nanoparticle coating method.

08 HYDROGEN↗

Effect of viscosity on photodegradation rates in complex secondary organic aerosol materials

This work explores the effect of environmental conditions on the photodegradation rates of atmospherically relevant, photolabilie, organic molecules embedded in a film of secondary organic material (SOM). Three types of SOM were studied: a-pinene/O3 SOM (PSOM), limonene/O3 SOM (LSOM), and aged limonene/O3 obtained by exposure of LSOM to ammonia (brown LSOM). PSOM and LSOM were impregnated with 2,4-dinitrophenol (2,4-DNP), an atmospherically relevant molecule that photodegrades faster than either PSOM or LSOM alone, to serve as a probe of SOM matrix effects on photochemistry. Brown LSOM contains an unidentified chromophore that absorbs strongly at 510 nm and photobleaches upon irradiation. This chromophore served as a probe molecule for the brown LSOM experiments. In all experiments, the temperature and relative humidity (RH) surrounding the SOM films were varied. The extent of photochemical reaction in the samples was monitored using UV-Vis absorption spectroscopy. For all three model systems examined, the observed photodegradation rates were slower at lower temperatures and lower RH, under conditions that make SOM more viscous. Additionally, the activation energies for photodegradation of each system were positively correlated with the viscosity of the SOM matrix as measured in poke-flow experiments. These activation energies were calculated to be 50, 24, and 17 kJ/mol for 2,4-DNP in PSOM, 2,4-DNP in LSOM, and brown LSOM, respectively and PSOM was found to be the most viscous of the three. These results suggest that the increased viscosity is hindering the motion of the molecules in SOM and is slowing down photochemical reactions in which they participate.

Environmental Molecular Sciences Laboratory↗

Temperature dependent dielectric and magnetic properties of GdFe{sub 1−x}Ni{sub x}O{sub 3} (0.0 ≤ x ≤ 0.3) orthoferrites

The polycrystalline samples of GdFe{sub 1−x}Ni{sub x}O{sub 3} (x = 0.0, 0.1, 0.2, 0.3) orthoferrites are synthesized via solid state reaction route. The Rietveld fitted X-ray diffraction patterns confirm the formation of orthorhombic phase with Pbnm space group for all the samples. The dielectric measurements reveal an enhancement in dielectric constant and tangent loss with increase in both temperature as well as Nickel (Ni) substitution. Dielectric studies are also in support with the induction of delocalized charge carriers in the GdFeO{sub 3} matrix with increasing Ni doping. Magnetization versus applied field study shows the non-saturating hysteresis curves suggesting the canted type antiferromagnetic behavior in the considered orthoferrites. Moreover, the observed magnetic behavior is complex and the doping affects the magnitude of magnetization differently at 300 K and 80 K. It has further been noticed that the incorporated Ni{sup 3+} ions enhances the symmetry of the magnetization curves. The as-prepared samples may find their applications in the decoupling capacitors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Sample-morphology effects on x-ray photoelectron peak intensities. II. Estimation of detection limits for thin-film materials

The authors show that the National Institute of Standards and Technology database for the simulation of electron spectra for surface analysis (SESSA) can be used to determine detection limits for thin-film materials such as a thin film on a substrate or buried at varying depths in another material for common x-ray photoelectron spectroscopy (XPS) measurement conditions. Illustrative simulations were made for a W film on or in a Ru matrix and for a Ru film on or in a W matrix. In the former case, the thickness of a W film at a given depth in the Ru matrix was varied so that the intensity of the W 4d{sub 5/2} peak was essentially the same as that for a homogeneous RuW{sub 0.001} alloy. Similarly, the thickness of a Ru film at a selected depth in the W matrix was varied so that the intensity of the Ru 3p{sub 3/2} peak matched that from a homogeneous WRu{sub 0.01} alloy. These film thicknesses correspond to the detection limits of each minor component for measurement conditions where the detection limits for a homogeneous sample varied between 0.1 at. % (for the RuW{sub 0.001} alloy) and 1 at. % (for the WRu{sub 0.01} alloy). SESSA can be similarly used to convert estimates of XPS detection limits for a minor species in a homogeneous solid to the corresponding XPS detection limits for that species as a thin film on or buried in the chosen solid.

36 MATERIALS SCIENCE↗

Radiation Effects on High Thermal Conductivity Fuels (Final Scientific Report)

High thermal conductivity nuclear fuels offer important potential advantages over traditional oxide-based fuels such as higher burnup, reduction in fission gas release, and better overall safety of the reactor system. One interesting approach to high thermal conductivity fuels utilizes high thermal conductivity nonfissile additives to UO 2 fuel to lower the fuel operating temperature and thereby take advantage of the highly favorable radiation resistance of UO 2 at lower operating temperatures. However, differential swelling between the matrix and high conductivity additive phases during high dose irradiation could lead to internal cracking and poor performance. In the current study, ceria (CeO 2 ) and zirconia (ZrO 2 ) surrogate matrices were used to model UO 2 behavior. Al 2 O 3 or SiC in the form of nanoscale powder or platelets, respectively, were used for the high conductivity second phase. The nuclear fuel surrogates were sintered to achieve densities greater than 93% of the ideal values. Scanning electron microscopy (SEM) imaging and X-ray diffraction confirmed the uniform distribution of the second phase and that no intermetallic second phase was formed during sintering. The thermal conductivity of the sintered samples was measured from 50°C to 900°C and revealed an important increase compared to pure CeO2 and ZrO2 pellets. Samples were irradiated with 20 MeV Ni6+ ions at midrange doses ranging from 1 to 15 displacements per atom (dpa) and temperatures from 300°C to 700°C. Post irradiation characterization revealed a good stability of the samples at low to medium doses (1 to 5 dpa) but showed a significant microstructural deterioration and decrease of the mechanical properties at 15 dpa. Although microcracking is not observed at the interface between the matrix and high conductivity phase for any investigated irradiation condition, the strength degradation at 15 dpa suggests that these high thermal conductivity fuel forms may not be suitable for high burnup applications in current or proposed fission reactors.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗