Search NASA⌕ Search

SEARCH · Search NASA

Results for “powder diffraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,657 records · Page 92

Solvothermal syntheses and structures of indium(III)-binaphthalenyl dicarboxylate complexes with yellow/blue luminescence

Two novel In(III) complexes, [In(bna)(Hbna)]{sub n} (1) and [In{sub 2}(bna){sub 2}(mu{sub 2}-OH){sub 2}]{sub n}.4nH{sub 2}O (2) (H{sub 2}bna=2,2'-dihydroxy-1,1'-binaphthyl-3,3'-dicarboxylate acid), have been reported. Complex 1 adopts a 2D layer structure, where each layer composed from homochiral ligands is chiral while the ligands in two neighboring layers are enantiomer. Complex 2 is constructed by individual -In-O-In- chains, which are further connected by bna{sup 2-} into a 3D honeycomb framework. As a derivative of H{sub 2}bna ligand, dmbna (3) was recrystallized for structurally comparison with 1-2 (dmbna=dimethyl 2,2'-dihydroxy-1,1'-binaphthyl-3,3'-dicarboxylate). X-ray powder diffractions (XRD) and thermogravimetric analyses (TGA) for 1-2 show that they are highly thermally stable in the solid state. Complexes 1 and 2 exhibit the intense yellow luminescence at 573 nm and blue luminescence at 459 nm at room temperature, respectively. And an astonishing blue shift of 105 nm is observed for complex 1 when it is measured at 10 K. - Graphical abstract: Two indium(III)-bna compounds were solvothermally synthesized. 1 adopts an unprecedented 2D chiral layer. 2 is constructed by -In-O-In- chains, which are further connected by bna{sup 2-} into a 3D honeycomb framework.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Magnetic properties of Co{sub 2}V{sub 2}O{sub 7} single crystals grown by flux method

Based on the phase diagram of CoO-V{sub 2}O{sub 5} system, single crystals of Co{sub 2}V{sub 2}O{sub 7} are grown using V{sub 2}O{sub 5} as self-flux at a slow cooling rate. The quality of grown crystals is analyzed by X-ray powder diffraction and electron probe microanalysis techniques. Magnetic properties are investigated by means of susceptibility, magnetization, and heat capacity measurements. Our experimental results suggest that Co{sub 2}V{sub 2}O{sub 7} is a three-dimensional antiferromagnet, in which two magnetic transitions may occur at low temperature and a spin-flop-like transition may occur at the applied field along the b-axis. By contrast to Ni{sub 2}V{sub 2}O{sub 7}, it is suggested that similar and different magnetic properties may arise from their similar crystal structures and different magnetic ions, respectively. - Abstract: Single crystals of Co{sub 2}V{sub 2}O{sub 7} are grown using V{sub 2}O{sub 5} as self-flux at a slow cooling rate. Magnetic properties are investigated by means of susceptibility, magnetization, and heat capacity measurements, showing that Co{sub 2}V{sub 2}O{sub 7} is likely to be a three-dimensional antiferromagnet with two magnetic transitions at low temperature. Display Omitted

36 MATERIALS SCIENCE↗

Porous cobalt oxide (Co{sub 3}O{sub 4}) nanorods: Facile syntheses, optical property and application in lithium-ion batteries

We developed a facile synthetic route of porous cobalt oxide (Co{sub 3}O{sub 4}) nanorods via a microemulsion-based method in combination with subsequent calcination process. The porous structure was formed by controlled decomposition of the microemulsion-synthesized precursor CoC{sub 2}O{sub 4} nanorods without destruction of the original morphology. The as-prepared Co{sub 3}O{sub 4} nanorods, consisting of small nanoparticles with diameter of 80-150 nm, had an average diameter of 200 nm and a length of 3-5 {mu}m. The morphology and structure of synthesized samples were characterized by transmission electron microscopy and scanning electron microscopy. The phase and composition were investigated by X-ray powder diffraction and X-ray photoelectron spectroscopy. The optical property of Co{sub 3}O{sub 4} nanorods was investigated. Moreover, the porous Co{sub 3}O{sub 4} nanorods exhibited high electrochemical performance when applied as cathode materials for lithium-ion batteries, which gives them good potential applications. - Graphical abstract: The porous Co{sub 3}O{sub 4} nanorods synthesized via a microemulsion-based method in combination with subsequent calcination were applied in the negative electrode materials for lithium-ion batteries and exhibited high electrochemical performance.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Auxiliary aromatic-acid effect on the structures of a series of Zn{sup II} coordination polymers: Syntheses, crystal structures, and photoluminescence properties

Five novel Zn{sup II}-(pyridyl)imidazole derivative coordination polymers, [Zn(L){sub 2}] (1), [Zn{sub 2}(mu{sub 3}-OH)L(m-BDC)] (2), [Zn{sub 2}(mu{sub 3}-OH)L(p-BDC)].H{sub 2}O (3), [Zn{sub 2}L(BTC)(H{sub 2}O)].2.5H{sub 2}O (4) and [Zn{sub 3.5}(mu{sub 3}-OH)L{sub 2}(BTEC)(H{sub 2}O)].H{sub 2}O (5) (L=4-((2-(pyridine-2-yl)-1H-imidazol-1-yl)methyl)benzoic acid, p-H{sub 2}BDC=1,4-benzenedicarboxylic acid, m-H{sub 2}BDC=1,3-benzenedicarboxylic acid, H{sub 3}BTC=1,3,5-benzenetricarboxylic acid, H{sub 4}BTEC=1,2,4,5-benzenetetracarboxylic acid), were successfully synthesized under hydrothermal conditions through varying auxiliary aromatic-acid ligands and structurally characterized by X-ray crystallography. Compound 1 exhibits a 1D chain linked via double L bridges. Compound 2 features a well-known pcu topology with bent dicarboxylate ligand (m-H{sub 2}BDC) as an auxiliary ligand, while 3 displays a bcu network with linear dicarboxylate ligand (p-H{sub 2}BDC) as an auxiliary ligand. The structure of compound 4 is a novel 3D (3,5)-connected network with (4.6{sup 2})(4.6{sup 4}.8{sup 2}.10.12{sup 2}) topology. It is interesting that compound 5 shows an intricate (3,4,8)-connected framework with (4.6{sup 2})(4{sup 2}.6{sup 3}.8)(4{sup 2}.6{sup 4})(4{sup 2}.6{sup 18}.7.8{sup 6}.10) topology. In addition, their infrared spectra (IR), X-ray powder diffraction (XPRD) and photoluminescent properties were also investigated in detail. - Graphical abstract: Five novel Zn{sup II}-organic architectures have been hydrothermally synthesized through varying auxiliary aromatic-acid ligands and characterized by X-ray diffraction, the photoluminescence properties of compounds 1-5 were studied.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Preparation and photoluminescence properties of RE:Na{sub 3}La{sub 9}O{sub 3}(BO{sub 3}){sub 8} (RE=Er, Yb) crystals

Using Na{sub 2}CO{sub 3}-H{sub 3}BO{sub 3}-NaF as fluxes, transparent RE:Na{sub 3}La{sub 9}O{sub 3}(BO{sub 3}){sub 8} (abbr. RE:NLBO, RE=Er, Yb) crystals have been grown by the top seed solution growth (TSSG) method. The X-ray powder diffraction analysis shows that the RE:NLBO crystals have the same structure with NLBO. The element contents were determined by molar to be 0.64% Er{sup 3+} in Er:NLBO, 2.70% Yb{sup 3+} in Yb:NLBO, respectively. The polarized absorption spectra of RE:NLBO have been measured at room temperature and show that both Er:NLBO and Yb:NLBO have a strong absorption bands near 980 nm with wide FWHM (Full Wave at Half Maximum) (21 nm for Er:NLBO and 25 nm for Yb:NLBO). Fluorescence spectra have been recorded. Yb:NLBO has the emission peaks at 985 nm, 1028 nm and 1079 nm and the emission peak of Er:NLBO is at 1536 nm. Spectral parameters have been calculated by the Judd-Ofelt theory for Er:NLBO and the reciprocity method for Yb:NLBO, respectively. The calculated values show that Er:NLBO is a candidate of 1.55 {mu}m laser crystals and Yb:NLBO is a candidate for self-frequency doubling crystal. - Graphical abstract: Fluorescence spectra show the emission peaks at 985, 1028 and 1079 nm of Yb:NLBO and at 1536 nm of Er:NLBO.

36 MATERIALS SCIENCE↗

Large-scale controllable synthesis of dumbbell-like BiVO{sub 4} photocatalysts with enhanced visible-light photocatalytic activity

The controllable synthesis of novel dumbbell-like BiVO{sub 4} hierarchical nanostructures has been successfully obtained via a simple hydrothermal route. The as-synthesized products were studied by X-ray powder diffraction, scanning electron microscopy, transmission electron microscopy and UV-vis absorption spectroscopy. The results showed that the nucleation and growth of the nanodumbbells were governed by an oriented aggregation growth mechanism. It is noteworthy that the concentration of poly(vinyl pyrrolidone) and the volume ratio of H{sub 2}O to CH{sub 3}COOH were crucial to the growth of the final nanoarchitectures. Control experiments were also carried out to investigate the factors which impact on the morphology of the products. Furthermore, the as-prepared BiVO{sub 4} hierarchical nanostructures demonstrated the superior visible-light-driven photocatalytic efficiency, which is helpful for the separation and recycle considering their promising applications in harmful pollutants disposal. - Graphical Abstract: The controllable synthesis of novel dumbbell-like BiVO{sub 4} hierarchical nanostructures has been successfully obtained via a simple hydrothermal route; the as-prepared BiVO{sub 4} hierarchical nanostructures demonstrated the superior visible-light-driven photocatalytic efficiency. Highlights: Black-Right-Pointing-Pointer Dumbbell-like BiVO{sub 4} structures were synthesized and characterized for the first time. Black-Right-Pointing-Pointer The volume ratios of H{sub 2}O to CH{sub 3}COOH were crucial to the final morphologies. Black-Right-Pointing-Pointer Their photocatalytic activity was up to 90% under visible-light irradiation. Black-Right-Pointing-Pointer Dumbbell-like BiVO{sub 4} structures may utilize the pollutant disposal.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hydrothermal Synthesis and Analysis of Iodine-Containing Sodalite - 16153

Five process variables affecting hydrothermal synthesis of iodide sodalite, Na{sub 8}Al{sub 6}Si{sub 6}O{sub 24}I{sub 2}, were investigated, including NaOH concentration, aging time, temperature, Al/Si ratio, and precursor concentration. X-ray powder diffraction was performed to characterize synthesized samples, and Rietveld refinement method was used to quantify the mass fractions of phases. Iodide sodalite yield increased, in general, as NaOH concentration, aging time, and temperature increased. Lowering the Al/Si ratio from 1 to 0.5 increased the formation of cancrinite. Diluting the precursor concentration in the mixed solution with water revealed that nepheline hydrate-1, a zeolite, formed rather than sodalite. This observation, along with the preferential formation of zeolite A in samples where no NaOH was added, suggests that mechanisms for transport of the ions and formation of the aluminosilicate frameworks vary with hydrothermal conditions. The model for the best synthesis conditions based on the four significant variables is presented. (authors)

36 MATERIALS SCIENCE↗

TRTR NRAD NRS Beamline Abstract

The Neutron Radiography (NRAD) Reactor is a 250kW TRIGA housed under the largest hot cell in the United States, making it the foremost location to perform neutron imaging of irradiated nuclear fuels and materials, including those intended for use with advanced reactors. Currently, NRAD has two radial beamlines that are used for neutron radiography and tomography. Upgrades to the North neutron beamline include the replacement of the in-tank beam chamber, through-the-wall collimator, and neutron shutter. These beamline upgrades will not only improve image quality for current capabilities but will also condition the beam to be more suitable for advanced methods such as neutron powder diffraction. These upgrades will increase the excess reactivity of the core, reduce unnecessary activation and exposure to workers, and significantly reduce the amount of shielding required around the beam. This presentation will describe how these upgrades improve beam quality, increase utilization of the reactor, and reduce radiation exposure to personnel.

21 - SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLAN↗

Abinitio powder x-ray diffraction and PIXEL energy calculations on thiophene derived 1,4 dihydropyridine

We focus on the application of powder diffraction data to get abinitio crystal structure determination of thiophene derived 1,4 DHP prepared by cyclocondensation method using solid catalyst. Crystal structure of the compound has been solved by direct-space approach on Monte Carlo search in parallel tempering mode using FOX program. Initial atomic coordinates were derived using Gaussian 09W quantum chemistry software in semi-empirical approach and Rietveld refinement was carried out using GSAS program. The crystal structure of the compound is stabilized by one N-H…O and three C-H…O hydrogen bonds. PIXEL lattice energy calculation was carried out to understand the physical nature of intermolecular interactions in the crystal packing, on which the total lattice energy is contributed into Columbic, polarization, dispersion, and repulsion energies.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Energy dispersive x-ray diffraction of luminescent powders: A complement to visible phosphor thermometry

Energy-dispersive x-ray diffraction of thermographic phosphors has been explored as a complementary temperature diagnostic to visible phosphor thermometry in environments where the temperature-dependent optical luminescence of the phosphors is occluded. Powder phosphor samples were heated from ambient to 300°C in incremental steps and probed with polychromatic synchrotron x rays; scattered photons were collected at a fixed diffraction angle of 3.9°. Crystal structure, lattice parameters, and coefficients of thermal expansion were calculated from the diffraction data. Finally, of the several phosphors surveyed, YAG:Dy, ZnO:Ga, and GOS:Tb were found to be excellent candidates for diffraction thermometry due to their strong, distinct diffraction peaks that shift in a repeatable and linear manner with temperature.

47 OTHER INSTRUMENTATION↗

Structure determination of oxamic acid from laboratory powder X-Ray diffraction data and energy minimization by DFT-D

The structure determination from laboratory X-ray powder diffraction data of oxamic acid, a derivative of the biologically active oxalic acid and the simplest organic acid containing an amide group, is presented in this contribution. An energy minimization analysis by DFT-D was carried out. The structure was determined with the program TALP and refined by the Rietveld method with GSAS-II in space group Cc (No. 9). The final unit-cell parameters are a = 9.4989 (6), b = 5.43796 (9), c = 6.8637 (9) Å, β = 107.152 (5)°, V = 338.772 (10) Å3, Z = 4. The refinement converged to the figures of merit: Re = 0.01674, Rp = 0.03270, Rwp = 0.05652 and GoF = 3.378 with a good fit between the calculated pattern of the structural model and the experimental pattern. The DFT-D calculations show an excellent reproduction of the experimental structure, validating the correctness of the structure. Furthermore, the non-centrosymmetric nature of the structure was confirmed by SHG measurements. In the crystal structure, the molecules are close to planar and form a complex 2D hydrogen-bonding pattern based on the cyclic amide-acid heterosynthon.

36 MATERIALS SCIENCE↗

Specimen-displacement correction for powder X-ray diffraction in Debye–Scherrer geometry with a flat area detector

The effect of small changes in the specimen-to-detector distance on the unit-cell parameters is examined for synchrotron powder diffraction in Debye–Scherrer (transmission) geometry with a flat area detector. An analytical correction equation is proposed to fix the shift in 2θ values due to specimen capillary displacement. This equation does not require the use of an internal reference material, is applied during the Rietveld refinement step, and is analogous to the specimen-displacement correction equations for Bragg–Brentano and curved-detector Debye–Scherrer geometry experiments, but has a different functional form. The 2θ correction equation is compared with another specimen-displacement correction based on the use of an internal reference material in which new integration and calibration parameters of area-detector images are determined. Example data sets showing the effect of a 3.3 mm specimen displacement on the unit-cell parameters for 25°C CeO 2 , including both types of displacement correction, are described. These experiments were performed at powder X-ray diffraction beamlines at the National Synchrotron Light Source II at Brookhaven National Laboratory and the Advanced Photon Source at Argonne National Laboratory.

36 MATERIALS SCIENCE↗

Synthesis and characterization of new fluoride-containing manganese vanadates A{sub 2}Mn{sub 2}V{sub 2}O{sub 7}F{sub 2} (A=Rb, Cs) and Mn{sub 2}VO{sub 4}F

Large single crystals of A{sub 2}Mn{sub 2}V{sub 2}O{sub 7}F{sub 2} (A=Rb, Cs) and Mn{sub 2}VO{sub 4}F were grown using a high-temperature (~600 °C) hydrothermal technique. Single crystal X-ray diffraction and powder X-ray diffraction were utilized to characterize the structures, which both possess MnO{sub 4}F{sub 2} building blocks. The A{sub 2}Mn{sub 2}V{sub 2}O{sub 7}F{sub 2} series crystallizes as a new structure type in space group Pbcn (No. 60), Z=4 (Rb{sub 2}Mn{sub 2}V{sub 2}O{sub 7}F{sub 2}: a=7.4389(17) Å, b=11.574(3) Å, c=10.914(2) Å; Cs{sub 2}Mn{sub 2}V{sub 2}O{sub 7}F{sub 2}: a=7.5615(15) Å, b=11.745(2) Å, c=11.127(2) Å). The structure is composed of zigzag chains of edge-sharing MnO{sub 4}F{sub 2} units running along the a-axis, and interconnected through V{sub 2}O{sub 7} pyrovanadate groups. Temperature dependent magnetic susceptibility measurements on this interesting one-dimensional structural feature based on Mn{sup 2+} indicated that Cs{sub 2}Mn{sub 2}V{sub 2}O{sub 7}F{sub 2} is antiferromagnetic with a Neél temperature, T{sub N}=~3 K and a Weiss constant, θ, of −11.7(1) K. Raman and infrared spectra were also analyzed to identify the fundamental V–O vibrational modes in Cs{sub 2}Mn{sub 2}V{sub 2}O{sub 7}F{sub 2}. Mn{sub 2}(VO{sub 4})F crystalizes in the monoclinic space group of C2/c (no. 15), Z=8 with unit cell parameters of a=13.559(2) Å, b=6.8036(7) Å, c=10.1408(13) Å and β=116.16(3)°. The structure is associated with those of triplite and wagnerite. Dynamic fluorine disorder gives rise to complex alternating chains of five-and six-coordinate Mn{sup 2+}. These interpenetrating chains are additionally connected through isolated VO{sub 4} tetrahedra to form the condensed structure. - Graphical abstract: New vanadate fluorides A{sub 2}Mn{sub 2}V{sub 2}O{sub 7}F{sub 2} (A=Rb, Cs) and Mn{sub 2}(VO{sub 4})F have been synthesized hydrothermally. Upon cooling, the one-dimensional Mn(II) substructure results in antiferromagnetic ordering. Display Omitted - Highlights: • Single crystals of A{sub 2}Mn{sub 2}V{sub 2}O{sub 7}F{sub 2}, (A=Rb, Cs) and Mn{sub 2}VO{sub 4}F were grown hydrothermally. • The use of fluoride mineralizers in the synthesis led to the formation of new compounds without OH{sup −} groups. • The structure of A{sub 2}Mn{sub 2}V{sub 2}O{sub 7}F{sub 2} features zigzag chains of MnO{sub 4}F{sub 2} units. • Cs{sub 2}Mn{sub 2}V{sub 2}O{sub 7}F{sub 2} exhibits antiferromagnetic ordering with a Neel temperature of ~3 K. • Mn{sub 2}VO{sub 4}F possesses a condensed framework structure with disordered fluorine atoms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Neutron and X-ray investigations of the Jahn–Teller switch in partially deuterated ammonium copper Tutton salt, (NH 4 ) 2 [Cu(H 2 O) 6 ](SO 4 ) 2

The structural phase transition accompanied by a Jahn–Teller switch has been studied over a range of H/D ratios in (NH 4 ) 2 [Cu(H 2 O) 6 ](SO 4 ) 2 (ACTS). In particular, single-crystal neutron diffraction investigations of crystals with deuteration in the range 50 to 82% are shown to be consistent with previous electron paramagnetic resonance (EPR) experiments exhibiting a phase boundary at 50% deuteration under ambient pressure. Polycrystalline samples show that the two phases can co-exist. In addition, single-crystal neutron and polycrystalline X-ray diffraction pressure experiments show a shift to lower pressure at 60% deuteration versus previous measurements at 100% deuteration.

deuterium isotope phase transition↗

Defect chemistry of phospho-olivine nanoparticles synthesized by a microwave-assisted solvothermal process

Nanocrystalline LiFePO{sub 4} powders synthesized by a microwave-assisted solvothermal (MW-ST) process have been structurally characterized with a combination of high resolution powder neutron diffraction, synchrotron X-ray diffraction, and aberration-corrected HAADF STEM imaging. A significant level of defects has been found in the samples prepared at 255 and 275 °C. These temperatures are significantly higher than what has previously been suggested to be the maximum temperature for defect formation in LiFePO{sub 4}, so the presence of defects is likely related to the rapid MW-ST synthesis involving a short reaction time (∼5 min). A defect model has been tentatively proposed, though it has been shown that powder diffraction data alone cannot conclusively determine the precise defect distribution in LiFePO{sub 4} samples. The model is consistent with other literature reports on nanopowders synthesized at low temperatures, in which the unit cell volume is significantly reduced relative to defect-free, micron-sized LiFePO{sub 4} powders. - Graphical abstract: Temperature-dependent antisite defect formation has been observed in nanocrystalline LiFePO{sub 4} powders synthesized by a microwave solvothermal process, using high resolution diffraction and STEM imaging. Display Omitted - Highlights: • LiFePO{sub 4} nanopowders synthesized by a microwave-assisted solvothermal process. • Defects directly observed by aberration-corrected HAADF STEM imaging. • Antisite defects present from synthesis at 255 and 275 °C. • Defects present from higher temperature synthesis than previously reported. • Powder diffraction data have been analyzed in detail for various defect models.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High-pressure powder x-ray diffraction study of EuVO{sub 4}

The high-pressure structural behavior of europium orthovanadate has been studied using in-situ, synchrotron based, high-pressure x-ray powder diffraction technique. Angle-dispersive x-ray diffraction measurements were carried out at room temperature up to 34.7 GPa using a diamond-anvil cell, extending the pressure range reported in previous experiments. We confirmed the occurrence of zircon–scheelite phase transition at 6.8 GPa and the coexistence of low- and high-pressure phases up to 10.1 GPa. In addition, clear evidence of a scheelite–fregusonite transition is found at 23.4 GPa. The fergusonite structure remains stable up to 34.7 GPa, the highest pressure reached in the present measurements. A partial decomposition of EuVO{sub 4} was also observed from 8.1 to 12.8 GPa; however, this fact did not preclude the identification of the different crystal structures of EuVO{sub 4}. The crystal structures of the different phases have been Rietveld refined and their equations of state (EOS) have been determined. The results are compared with the previous experimental data and theoretical calculations. - Graphical abstract: The high-pressure structural sequence of EuVO{sub 4}. - Highlights: • EuVO{sub 4} is studied under pressure up to 35 GPa using synchrotron XRD. • The zircón–scheelite–fergusonite structural sequence is observed. • Crystal structures are refined and equations of state determined.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗