Search NASA⌕ Search

SEARCH · Search NASA

Results for “random sampling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,657 records · Page 92

Hydrogen Species Motion in Piezoelectrics: A Quasi-Elastic Neutron Scattering Study

Hydrogen is known to damage or degrade piezoelectric materials, at low pressure for ferroelectric random access memory applications, and at high pressure for hydrogen powered vehicle applications. The piezoelectric degradation is in part governed by the motion of hydrogen species within the piezoelectric materials. We present here Quasi-Elastic Neutron Scattering (QENS) measurements of the local hydrogen species motion within lead zirconate titanate (PZT) and barium titanate (BTO) on samples charged by gaseous exposure to high-pressure gaseous hydrogen {approx}17 MPa. Filter Analyzed Neutron Spectroscopy (FANS) studies of the hydrogen enhanced vibrational modes are presented as well. Results are discussed in context of theoretically predicted interstitial hydrogen lattice sites and compared to comparable bulk diffusion studies of hydrogen diffusion in lead zirconate titanate.

36 MATERIALS SCIENCE↗

Multifunctional, Phase-Separated, BaTiO 3 + CoFe 2 O 4 Cap Buffer Layers for Improved Flux-Pinning in YBa 2 Cu 3 O 7- Based Coated Conductors

Phase separated, epitaxial, nanostructured film comprised of BaTiO{sub 3} (BTO) and CoFe{sub 2}O{sub 4} (CFO) composite has been developed as a potential multifunctional cap buffer layer for improved flux-pinning in YBa{sub 2}Cu{sub 3}O{sub 7-{delta}} (YBCO) films. All films were deposited by pulsed laser deposition on SrTiO{sub 3} (STO) (100) single crystal substrates. The CFO fraction and growth temperature were identified as key factors for determining the areal number density and mean diameter of the CFO nanocolumns. Compared to the reference sample grown on a pure BTO cap layer, the YBCO films grown on BTO+CFO cap layers show a remarkable improvement in isotropic flux-pinning and, consequently, J{sub c} over the entire field and angle ranges. Transmission electron microscopy analysis confirmed the presence of a very defective YBCO layer containing a high density of randomly distributed defects at the interface area, induced by nanostructural modulation on the surface of the BTO+CFO composite cap layer.

36 MATERIALS SCIENCE↗

Selection of high-redshift Lyman-Break Galaxies from broadband and wide photometric surveys

Here, in this paper, we investigate the possibility of selecting high-redshift Lyman-Break Galaxies (LBG) using current and future broadband wide photometric surveys, such as the Ultraviolet Near Infrared Optical Northern Survey (UNIONS) or the Vera C. Rubin Legacy Survey of Space and Time (LSST), using a Random Forest algorithm. This work is conducted in the context of future large-scale structure spectroscopic surveys like DESI-II, the next phase of the Dark Energy Spectroscopic Instrument (DESI), which will start around 2029. We use deep imaging data from the Hyper Suprime Camera (HSC) and the Canada-France-Hawaii Telescope Large Area U-band Deep Survey (CLAUDS) on the COSMOS and XMM-LSS fields. To predict the selection performance of LBGs with image quality similar to UNIONS, we degrade the u,g,r,i and z bands to UNIONS depth. The Random Forest algorithm is trained with the u,g,r,i and z bands to classify LBGs in the 2.5 < z < 3.5 range. We find that fixing a target density budget of 1,100 deg -2 , the Random Forest approach gives a density of z > 2 targets of 873 deg -2 , and a density of 493 deg -2 of confirmed LBGs after spectroscopic confirmation with DESI. This UNIONS-like selection was tested in a dedicated spectroscopic observation campaign of 1,000 targets with DESI on the COSMOS field, providing a safe spectroscopic sample with a mean redshift of 3. This sample is used to derive forecasts for DESI-II, assuming a sky coverage of 5,000 deg 2 . We predict uncertainties on Alcock-Paczynski parameters α ⊥ and α ∥ to be 0.7% and 1% for 2.6 < z < 3.2, resulting in a potential 2% measurement of the dark energy fraction at high redshift. Additionally, we estimate the uncertainty in local non-Gaussianity and predict σ fNL ≈ 7, which would be comparable to the current best precision achieved by Planck. The latter forecast suggests that achieving the precision required to place stringent constraints on inflationary models (σ fNL ≈ 1) using spectroscopic galaxy surveys necessitates the development of a next-generation (Stage V) spectroscopic survey.

cosmological parameters from LSS↗

Rapid estimation of earthquake locations using waveform traveltimes

SUMMARY We introduce a new approach for locating earthquakes using arrival times derived from waveforms. The most costly computational step of the algorithm scales as the number of stations in the active seismographic network. In this approach, a variation on existing grid search methods, a series of full waveform simulations are conducted for all receiver locations, with sources positioned successively at each station. The traveltime field over the region of interest is calculated by applying a phase picking algorithm to the numerical wavefields produced from each simulation. An event is located by subtracting the stored traveltime field from the arrival time at each station. This provides a shifted and time-reversed traveltime field for each station. The shifted and time-reversed fields all approach the origin time of the event at the source location. The mean or median value at the source location thus approximates the event origin time. Measures of dispersion about this mean or median time at each grid point, such as the sample standard error and the average deviation, are minimized at the correct source position. Uncertainty in the event position is provided by the contours of standard error defined over the grid. An application of this technique to a synthetic data set indicates that the approach provides stable locations even when the traveltimes are contaminated by additive random noise containing a significant number of outliers and velocity model errors. It is found that the waveform-based method out-performs one based upon the eikonal equation for a velocity model with rapid spatial variations in properties due to layering. A comparison with conventional location algorithms in both a laboratory and field setting demonstrates that the technique performs at least as well as existing techniques.

58 GEOSCIENCES↗

Optical variability of quasars with 20-yr photometric light curves

ABSTRACT We study the optical gri photometric variability of a sample of 190 quasars within the SDSS Stripe 82 region that have long-term photometric coverage during ∼1998−2020 with SDSS, PanSTARRS-1, the Dark Energy Survey, and dedicated follow-up monitoring with Blanco 4m/DECam. With on average ∼200 nightly epochs per quasar per filter band, we improve the parameter constraints from a Damped Random Walk (DRW) model fit to the light curves over previous studies with 10–15 yr baselines and ≲ 100 epochs. We find that the average damping time-scale τDRW continues to rise with increased baseline, reaching a median value of ∼750 d (g band) in the rest frame of these quasars using the 20-yr light curves. Some quasars may have gradual, long-term trends in their light curves, suggesting that either the DRW fit requires very long baselines to converge, or that the underlying variability is more complex than a single DRW process for these quasars. Using a subset of quasars with better-constrained τDRW (less than 20 per cent of the baseline), we confirm a weak wavelength dependence of τDRW∝λ0.51 ± 0.20. We further quantify optical variability of these quasars over days to decades time-scales using structure function (SF) and power spectrum density (PSD) analyses. The SF and PSD measurements qualitatively confirm the measured (hundreds of days) damping time-scales from the DRW fits. However, the ensemble PSD is steeper than that of a DRW on time-scales less than ∼ a month for these luminous quasars, and this second break point correlates with the longer DRW damping time-scale.

79 ASTRONOMY AND ASTROPHYSICS↗

Polarized photoluminescence of nc-Si–SiO{sub x} nanostructures

The effect of photoluminescence polarization memory in nc-Si–SiO{sub x} light-emitting structures containing Si nanoparticles (nc-Si) in an oxide matrix is for the first time studied. The polarization properties of continuous and porous nanostructures passivated in HF vapors (or solutions) are studied. It is established that the polarization memory effect is manifested only after treatment of the structures in HF. The effect is also accompanied by a shift of the photoluminescence peak to shorter wavelengths and by a substantial increase in the photoluminescence intensity. It is found that, in anisotropic nc-Si–SiO{sub x} samples produced by oblique deposition in vacuum, the degree of linear photoluminescence polarization in the sample plane exhibits a noticeable orientation dependence and correlates with the orientation of SiO{sub x} nanocolumns forming the structure of the porous layer. These effects are attributed to the transformation of symmetrically shaped Si nanoparticles into asymmetric elongated nc-Si particles upon etching in HF. In continuous layers, nc-Si particles are oriented randomly, whereas in porous structures, their preferential orientation coincides with the orientation of oxide nanocolumns.

36 MATERIALS SCIENCE↗

Effect of Random Nanostructured Metallic Environments on Spontaneous Emission of HITC Dye

We have studied emission kinetics of HITC laser dye on top of glass, smooth Au films, and randomly structured porous Au nanofoams. The observed concentration quenching of luminescence of highly concentrated dye on top of glass (energy transfer to acceptors) and the inhibition of the concentration quenching in vicinity of smooth Au films were in accord with our recent findings. Intriguingly, the emission kinetics recorded in different local spots of the Au nanofoam samples had a spread of the decay rates, which was large at low dye concentrations and became narrower with increase of the dye concentration. We infer that in different subvolumes of Au nanofoams, HITC molecules are coupled to the nanofoams weaker or stronger. The inhibition of the concentration quenching in Au nanofoams was stronger than on top of smooth Au films. This was true for all weakly and strongly coupled subvolumes contributing to the spread of the emission kinetics. The experimental observations were explained using theoretical model accounting for change in the Förster radius caused by the strong energy transfer to metal.

36 MATERIALS SCIENCE↗

Selection of high-redshift Lyman-Break Galaxies from broadband and wide photometric surveys

In this paper, we investigate the possibility of selecting high-redshift Lyman-Break Galaxies (LBG) using current and future broadband wide photometric surveys, such as the Ultraviolet Near Infrared Optical Northern Survey (UNIONS) or the Vera C. Rubin Legacy Survey of Space and Time (LSST), using a Random Forest algorithm. This work is conducted in the context of future large-scale structure spectroscopic surveys like DESI-II, the next phase of the Dark Energy Spectroscopic Instrument (DESI), which will start around 2029.We use deep imaging data from the Hyper Suprime Camera (HSC) and the Canada-France-Hawaii Telescope Large Area U-band Deep Survey (CLAUDS) on the COSMOS and XMM-LSS fields. To predict the selection performance of LBGs with image quality similar to UNIONS, we degrade the u,g,r,i and z bands to UNIONS depth.The Random Forest algorithm is trained with the u,g,r,i and z bands to classify LBGs in the 2.5 < z < 3.5 range.We find that fixing a target density budget of 1,100 deg$^{-2}$, the Random Forest approach gives a density of z > 2 targets of 873 deg$^{-2}$, and a density of 493 deg$^{-2}$ of confirmed LBGs after spectroscopic confirmation with DESI. This UNIONS-like selection was tested in a dedicated spectroscopic observation campaign of 1,000 targets with DESI on the COSMOS field, providing a safe spectroscopic sample with a mean redshift of 3. This sample is used to derive forecasts for DESI-II, assuming a sky coverage of 5,000 deg$^{2}$. We predict uncertainties on Alcock-Paczynski parameters α$_{⊥}$ and α$_{∥}$ to be 0.7% and 1% for 2.6 < z < 3.2, resulting in a potential 2% measurement of the dark energy fraction at high redshift. Additionally, we estimate the uncertainty in local non-Gaussianity and predict σ$_{fNL}$ ≈ 7, which would be comparable to the current best precision achieved by Planck. The latter forecast suggests that achieving the precision required to place stringent constraints on inflationary models (σ$_{fNL}$ ≈ 1) using spectroscopic galaxy surveys necessitates the development of a next-generation (Stage V) spectroscopic survey.

79 ASTRONOMY AND ASTROPHYSICS↗

DEVELOPMENT OF AN ANTIFOAM TRACKING SYSTEM AS AN OPTION TO SUPPORT THE MELTER OFF-GAS FLAMMABILITY CONTROL STRATEGY AT THE DWPF

The Savannah River National Laboratory (SRNL) has been working with the Savannah River Remediation (SRR) Defense Waste Processing Facility (DWPF) in the development and implementation of an additional strategy for confidently satisfying the flammability controls for DWPF’s melter operation. An initial strategy for implementing the operational constraints associated with flammability control in DWPF was based upon an analytically determined carbon concentration from antifoam. Due to the conservative error structure associated with the analytical approach, its implementation has significantly reduced the operating window for processing and has led to recurrent Slurry Mix Evaporator (SME) and Melter Feed Tank (MFT) remediation. To address the adverse operating impact of the current implementation strategy, SRR issued a Technical Task Request (TTR) to SRNL requesting the development and documentation of an alternate strategy for evaluating the carbon contribution from antifoam. The proposed strategy presented in this report was developed under the guidance of a Task Technical and Quality Assurance Plan (TTQAP) and involves calculating the carbon concentration from antifoam based upon the actual mass of antifoam added to the process assuming 100% retention. The mass of antifoam in the Additive Mix Feed Tank (AMFT), in the Sludge Receipt and Adjustment Tank (SRAT), and in the SME is tracked by mass balance as part of this strategy. As these quantities are monitored, the random and bias uncertainties affecting their values are also maintained and accounted for. This report documents: 1) the development of an alternate implementation strategy and associated equations describing the carbon concentration from antifoam in each SME batch derived from the actual amount of antifoam introduced into the AMFT, SRAT, and SME during the processing of the batch. 2) the equations and error structure for incorporating the proposed strategy into melter off-gas flammability assessments. Sample calculations of the system are also included in this report. Please note that the system developed and documented in this report is intended as an alternative to the current, analytically-driven system being utilized by DWPF; the proposed system is not intended to eliminate the current system. Also note that the system developed in this report to track antifoam mass in the AMFT, SRAT, and SME will be applicable beyond just Sludge Batch 8. While the model used to determine acceptability of the SME product with respect to melter off-gas flammability controls must be reassessed for each change in sludge batch, the antifoam mass tracking methodology is independent of sludge batch composition and as such will be transferable to future sludge batches.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

HIGH-RESOLUTION DARK MATTER DENSITY PROFILES OF THINGS DWARF GALAXIES: CORRECTING FOR NONCIRCULAR MOTIONS

We present a new method to remove the impact of random and small-scale noncircular motions from H I velocity fields in (dwarf) galaxies in order to better constrain the dark matter properties for these objects. This method extracts the circularly rotating velocity components from the H I data cube and condenses them into a so-called bulk velocity field. We derive high-resolution ({approx}0.2 kpc) rotation curves of IC 2574 and NGC 2366 based on bulk velocity fields derived from The H I Nearby Galaxy Survey obtained at the Very Large Array. We compare the bulk velocity field rotation curves with those derived from the traditional intensity-weighted mean velocity fields and find significant differences. The bulk velocity field rotation curves are significantly less affected by noncircular motions and constrain the dark matter distribution in our galaxies, allowing us to address the discrepancy between the inferred and predicted dark matter distribution in galaxies (the 'cusp/core' problem). Spitzer Infrared Nearby Galaxies Survey 3.6 {mu}m data, which are largely unaffected by dust in these systems, as well as ancillary optical information, are used to separate the contribution of the baryons from the total matter content. Using stellar population synthesis models, assuming various sets of metallicity and star-formation histories, we compute stellar mass-to-light ratios for the 3.6 {mu}m and 4.5 {mu}m bands. Using our predicted value for the 3.6 {mu}m stellar mass-to-light ratio, we find that the observed dark matter distributions of IC 2574 and NGC 2366 are inconsistent with the cusp-like dark matter halo predicted by {Lambda} Cold Dark Matter models, even after corrections for noncircular motions. This result also holds for other assumptions about the stellar mass-to-light ratio. The distribution of dark matter within our sample galaxies is best described by models with a kpc-sized constant-density core.

79 ASTRONOMY AND ASTROPHYSICS↗

Geometrically Tunable Beamed Light Emission from a Quantum‐Dot Ensemble Near a Gradient Metasurface

Abstract Optical metasurfaces have been widely investigated in recent years as a means to tailor the wavefronts of externally incident light for passive device applications. At the same time, their use in active optoelectronic devices such as light emitters is far less established. This work explores their ability to control the radiation properties of a nearby continuous ensemble of randomly oriented incoherent dipole sources via near‐field interactions. Specifically, a film of colloidal quantum dots is deposited on a plasmonic metasurface consisting of a 1D array of metallic nanoantennas on a metal film. The array is designed to introduce a linear phase profile upon reflection, and a bi‐periodic nanoparticle arrangement is introduced to ensure adequate sampling of the desired phase gradient. Highly directional radiation patterns are correspondingly obtained from the quantum dots at an enhanced emission rate. The underlying radiation mechanism involves the near‐field excitation of surface plasmon polaritons at the metal film, and their selective diffractive scattering by the metasurface into well‐collimated beams along predetermined geometrically tunable directions. These results underscore the distinctive ability of metasurfaces to control radiation properties directly at the source level, which is technologically significant for the continued miniaturization and large‐scale integration of optoelectronic devices.

Wang, Xiaowei↗

Cytogenetic analysis of oral mucosa cells, induced by chlorhexidine, essential oils in ethanolic solution and triclosan mouthwashes

Objectives: The aim of this study was to evaluate DNA damage and cytokinetic defects, proliferative potential and cell death caused by the frequent use of mouthrinses containing chlorhexidine, triclosan and essential oils in ethanolic solution, compared to a placebo mouthwash. Study design: This double-blind, prospective, randomized clinical trial included 80 Caucasian patients. Subjects were divided into four groups: Group I used a mouthrinse, Triclosan; Group II used physiological saline; Group III used chlorhexidine; Group IV a mouthrinse with essential oils in ethanolic solution. All subjects used the mouthrinses for two weeks (15 ml, twice a day, rinsing for 30 s). Two cell samples per subject were collected, before and after mouthrinse use (on day 0 and day 15). Samples were processed as follows: cell collection from cheeks with a cytobrush; cell centrifuge; slide preparation, fixation and staining; and fluorescent microscope analysis. 2000 exfoliated cells were screened for nuclear abnormalities, particularly the presence of micronuclei by means of cytome assay. Results: No significant differences between study times (before and after use of mouthwash) were identified for any of the variables studied (p>0.05). Differences between mouthrinse groups were also compared but no significant differences were found (p>0.05). Conclusions: This study did not observe any genotoxic effect resulting from mouthrinse use. - Highlights: • Mouthrinses are used widely, mainly for their capacity to control dental plaque. • No genotoxic effects from the mouthrinses triclosan, chlorhexidine essential oils solution. • The buccal cytome assay is a sensitive, non-invasive, and low cost technique.

60 APPLIED LIFE SCIENCES↗

Facile synthesis and microwave absorbability of C@Ni–NiO core–shell hybrid solid sphere and multi-shelled NiO hollow sphere

We reported the preparation of C@Ni–NiO core–shell hybrid solid spheres or multi-shelled NiO hollow spheres by combining a facile hydrothermal route with a calcination process in H{sub 2} or air atmosphere, respectively. The synthesized C@Ni–NiO core–shell solid spheres with diameters of approximately 2–6 μm were in fact built from dense NiO nanoparticles coated by random two-dimensional metal Ni nanosheets without any visible pores. The multi-shelled NiO hollow spheres were built from particle-like ligaments and there are a lot of pores with size of several nanometers on the surface. Combined Raman spectra with X-ray photoelectron spectra (XPS), it suggested that the defects in the samples play a limited role in the dielectric loss. Compared with the other samples, the permeability of the samples calcined in H{sub 2} and air was increased slightly and the natural resonance frequency shifted to higher frequency (7, 11 and 14 GHz, respectively), leading to an enhancement of microwave absorption property. For the sample calcined in H{sub 2}, an optimal reflection loss less than − 10 was obtained at 7 GHz with a matching thickness of 5.0 mm. Our study demonstrated the potential application of C@Ni–NiO core–shell hybrid solid sphere or multi-shelled NiO hollow sphere as a more efficient electromagnetic (EM) wave absorber. - Highlights: • C@Ni–NiO core–shell hybrid solid sphere was synthesized by a facile method. • Multi-shelled NiO hollow sphere was synthesized by a facile method. • It suggested that the defects in the samples play a limited role in dielectric loss. • The permeability of the samples calcined in H{sub 2} and air was increased. • Microwave absorbability of C@Ni–NiO core–shell hybrid solid sphere was investigated.

36 MATERIALS SCIENCE↗

A pseudo-thermodynamic description of dispersion for nanocomposites

Dispersion in polymer nanocomposites is determined by the kinetics of mixing and chemical affinity. Compounds like reinforcing filler/elastomer blends display some similarity to colloidal solutions in that the filler particles are close to randomly dispersed through processing. It is attractive to apply a pseudo-thermodynamic approach taking advantage of this analogy between the kinetics of mixing for polymer compounds and thermally driven dispersion for colloids. In order to demonstrate this pseudo-thermodynamic approach, two polybutadienes and one polyisoprene were milled with three carbon blacks and two silicas. These samples were examined using small-angle x-ray scattering as a function of filler concentration to determine a pseudo-second order virial coefficient, A 2 , which is used as an indicator for compatibility of the filler and polymer. It is found that A 2 follows the expected behavior with lower values for smaller primary particles indicating that smaller particles are less compatible and more difficult to mix. The measured values of A 2 can be used to specify repulsive interaction potentials for coarse grain DPD simulations of filler/elastomer systems. In addition, new methods to quantify the filler percolation threshold and filler mesh size as a function of filler concentration are obtained. Moreover, the results represent a new approach to understanding and predicting compatibility in polymer nanocomposites based on a pseudo-thermodynamic approach.

36 MATERIALS SCIENCE↗

Coalescence of silver clusters by immersion in diluted HF solution

The galvanic displacement deposition of silver on H-terminated Si (100) in the time scale of seconds is instantaneous and characterized by a cluster density of 10{sup 11}-10{sup 12} cm{sup −2}. The amount of deposited Ag follows a t{sup 1/2} dependence in agreement with a Cottrell diffusion limited mechanism. At the same time, during the deposition, the cluster density reduces by a factor 5. This behavior is in contrast with the assumption of immobile clusters. We show in the present work that coalescence and aggregation occur also in the samples immersed in the diluted hydrofluoric acid (HF) solution without the presence of Ag{sup +}. Clusters agglomerate according to a process of dynamic coalescence, typical of colloids, followed by atomic redistribution at the contact regions with the generation of multiple internal twins and stacking-faults. The normalized size distributions in terms of r/r{sub mean} follow also the prediction of the Smoluchowski ripening mechanism. No variation of the cluster density occurs for samples immersed in pure H{sub 2}O solution. The different behavior might be associated to the strong attraction of clusters to oxide-terminated Si surface in presence of water. The silver clusters are instead weakly bound to hydrophobic H-terminated Si in presence of HF. HF causes then the detachment of clusters and a random movement on the silicon surface with mobility of about 10{sup −13} cm{sup 2}/s. Attractive interaction (probably van der Waals) among particles promotes coarsening.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Benchmarking structural evolution methods for training of machine learned interatomic potentials

When creating training data for machine-learned interatomic potentials (MLIPs), it is common to create initial structures and evolve them using molecular dynamics (MD) to sample a larger configuration space. Here, we benchmark two other modalities of evolving structures, contour exploration (CE) and dimer-method (DM) searches against MD for their ability to produce diverse and robust density functional theory training data sets for MLIPs. We also discuss the generation of initial structures which are either from known structures or from random structures in detail to further formalize the structure-sourcing processes in the future. The polymorph-rich zirconium-oxygen composition space is used as a rigorous benchmark system for comparing the performance of MLIPs trained on structures generated from these structural evolution methods. Using Behler–Parrinello neural networks as our MLIP models, we find that CE and the DM searches are generally superior to MD in terms of spatial descriptor diversity and statistical accuracy.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Thermal Profiling of Residential Energy Use

This work describes a methodology for informing targeted demand-response (DR) and marketing programs that focus on the temperature-sensitive part of residential electricity demand. Our methodology uses data that is becoming readily available at utility companies-hourly energy consumption readings collected from "smart" electricity meters, as well as hourly temperature readings. To decompose individual consumption into a thermal-sensitive part and a base load (non-thermally-sensitive), we propose a model of temperature response that is based on thermal regimes, i.e., unobserved decisions of consumers to use their heating or cooling appliances. We use this model to extract useful benchmarks that compose thermal profiles of individual users, i.e., terse characterizations of the statistics of these users' temperature-sensitive consumption. We present example profiles generated using our model on real consumers, and show its performance on a large sample of residential users. This knowledge may, in turn, inform the DR program by allowing scarce operational and marketing budgets to be spent on the right users-those whose influencing will yield highest energy reductions-at the right time. We show that such segmentation and targeting of users may offer savings exceeding 100% of a random strategy.

Albert, A↗

Evidence of Panmixia between Sympatric Life History Forms of Coastal Cutthroat Trout in Two Lower Columbia River Tributaries

Abstract Coastal cutthroat trout Oncorhynchus clarkii clarkii exhibit resident and migratory life history strategies that often occur sympatrically, but the relationship between these forms within a population is poorly characterized. Through use of passive integrated transponder technology, migratory and resident coastal cutthroat trout were identified in two lower Columbia River tributaries (Abernathy Creek and the Chinook River) separated by more than 80 km. Genetic data from 17 highly variable microsatellite loci were used to ascertain the genetic population structure of these life history forms within and between streams. No distinct genetic separation was observed between the life history forms within a stream, as assessed by four different statistical approaches: permutation tests based on the genetic differentiation index FST, principal components analysis of individuals, analysis of molecular variance, and contingency tests of allele frequency heterogeneity. Genetic differences were an order of magnitude higher between stream samples (FST > 0.03) than between life history forms within a stream (FST < 0.003). The contingency test detected allele frequency differences between migratory and resident life history forms in Abernathy Creek (P = 0.001), but this result was influenced more by age-class structure than by reproductive isolation between life history forms. Results are consistent with a single, randomly mating population in each stream producing both migratory and resident life history forms. These data suggest that individual life history strategy in coastal cutthroat trout is predominantly determined by phenotypic plasticity rather than genotype.

Johnson, Jeffrey R.↗