Search NASA⌕ Search

SEARCH · Search NASA

Results for “sample size”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,657 records · Page 92

Laser Terahertz Emission Microscope for Imaging Grain Heterogeneity: A Case Study of CH3NH3PbI3 Perovskite Semiconductors

Strong terahertz (THz) emission from the methylammonium lead iodide (MAPbI3) perovskite semiconductors has been observed following above-bandgap photoexcitation, yet local THz responses of crystalline microstructures are absent. We implement laser THz emission microscope (LTEM), yet-to-be applied to the perovskite semiconductors, as a novel and complementary tool to evaluate the electronic and grain heterogeneity of MAPbI3 thin films. Two MAPbI3 samples with different grain sizes are studied. Using this approach, we show that the one with a larger grain size gives more uniform THz radiation. More significant spatial THz intensity fluctuation is observed for the sample with a smaller grain size.

36 MATERIALS SCIENCE↗

Preparation of new morphological ZnO and Ce-doped ZnO

ZnO micro-tori and cerium doped hexangulars ZnO have been prepared by the sol-gel method under methanol hypercritical conditions of temperature and pressure. X-ray diffraction (XRD) measurement has revealed the high crystalline quality and the nanometric size of the samples. Scanning electron microscopy (SEM) has shown that the ZnO powder has a torus-like shape while that of ZnO:Ce has a hexangular-like shape, either standing free or inserted into the cores of ZnO tori. Transmission electron microscopy (TEM) has revealed that the ZnO particles have sizes between 25 and 30 nm while Ce-doped ZnO grains have diameters ranging from 75 nm to 100 nm. Photoluminescence spectra at room temperature of the samples have revealed that the introduction of cerium in ZnO reduces the emission intensity lines, particularly the ZnO red and green ones.

36 MATERIALS SCIENCE↗

STELLAR POPULATIONS FROM SPECTROSCOPY OF A LARGE SAMPLE OF QUIESCENT GALAXIES AT Z > 1: MEASURING THE CONTRIBUTION OF PROGENITOR BIAS TO EARLY SIZE GROWTH

We analyze the stellar populations of a sample of 62 massive (log M {sub *}/M {sub ☉} > 10.7) galaxies in the redshift range 1 < z < 1.6, with the main goal of investigating the role of recent quenching in the size growth of quiescent galaxies. We demonstrate that our sample is not biased toward bright, compact, or young galaxies, and thus is representative of the overall quiescent population. Our high signal-to-noise ratio Keck/LRIS spectra probe the rest-frame Balmer break region that contains important absorption line diagnostics of recent star formation activity. We obtain improved measures of the various stellar population parameters, including the star formation timescale τ, age, and dust extinction, by fitting templates jointly to both our spectroscopic and broadband photometric data. We identify which quiescent galaxies were recently quenched and backtrack their individual evolving trajectories on the UVJ color-color plane finding evidence for two distinct quenching routes. By using sizes measured in the previous paper of this series, we confirm that the largest galaxies are indeed among the youngest at a given redshift. This is consistent with some contribution to the apparent growth from recent arrivals, an effect often called progenitor bias. However, we calculate that recently quenched objects can only be responsible for about half the increase in average size of quiescent galaxies over a 1.5 Gyr period, corresponding to the redshift interval 1.25 < z < 2. The remainder of the observed size evolution arises from a genuine growth of long-standing quiescent galaxies.

79 ASTRONOMY AND ASTROPHYSICS↗

Effect of annealing on the structural and optical properties of TiO{sub 2} powder prepared by sol-gel route

Using titanium isopropoxide as the precursor, Titanium dioxide (TiO{sub 2}) powder was synthesized via sol-gel method, a promising low temperature route for preparing nanosized metal oxide semiconductors with good homogeneity at low cost. The as-prepared nano powder was thermally treated in air at 550, 650, 750, 900 and 1100°C for 1hr after drying at room temperature and used for further characterization. X-ray diffraction measurements showed that the annealing treatment has a strong impact on the crystal phase of TiO{sub 2} samples. The crystallite size as calculated from Debye Scherer formula lies in the range 29-69 nm and is found to increase with increase in annealing temperature. Photoluminescence studies exhibit an improvement in the optical efficiency of the samples with post synthesis heat treatment. Annealing at temperature above 900°C results in a degradation of the structural and optical quality of the TiO{sub 2} nano powder samples.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Multispectroscopic Study of Single Xe Clusters Using XFEL Pulses

X-ray free-electron lasers (XFELs) deliver ultrashort coherent laser pulses in the X-ray spectral regime, enabling novel investigations into the structure of individual nanoscale samples. In this work, we demonstrate how single-shot small-angle X-ray scattering (SAXS) measurements combined with fluorescence and ion time-of-flight (TOF) spectroscopy can be used to obtain size- and structure-selective evaluation of the light-matter interaction processes on the nanoscale. We recorded the SAXS images of single xenon clusters using XFEL pulses provided by the SPring-8 Angstrom compact free-electron laser (SACLA). The XFEL fluences and the radii of the clusters at the reaction point were evaluated and the ion TOF spectra and fluorescence spectra were sorted accordingly. We found that the XFEL fluence and cluster size extracted from the diffraction patterns showed a clear correlation with the fluorescence and ion TOF spectra. Our results demonstrate the effectiveness of the multispectroscopic approach for exploring laser–matter interaction in the X-ray regime without the influence of the size distribution of samples and the fluence distribution of the incident XFEL pulses.

74 ATOMIC AND MOLECULAR PHYSICS↗

Effect of SiO{sub 2} on the Formation of Acicular Calcium Ferrite in Sinter

SiO{sub 2} greatly influences the formation of acicular calcium ferrite (ACF), which is the main binder phase in sinter, but the mechanism of its influence is not yet clear. Experiments were carried out under air at 1200 °C with different amounts of SiO{sub 2} mixed with Fe{sub 2}O{sub 3} and Ca(OH){sub 2}. X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive spectroscopy (EDS), and three-dimensional (3D) reconstruction were used to characterize the phase and morphological changes of the sintered samples. The results show that SiO{sub 2} can form silicon-ferrite of calcium (SFC), which is beneficial to the formation of ACF in sinter. The SFC content first increased and then decreased with the increasing SiO{sub 2} content. The sintered sample contained the highest contents of SFC and ACF when w(SiO{sub 2}) was 3 to 4 pct. The morphological changes in calcium ferrite observed with the increasing SiO{sub 2} content followed a sequence of massive → platy → acicular; both platy calcium ferrite and ACF were the longest in one direction in their 3D morphology. The inclusion of Si{sup 4+} in calcium ferrite crystals changes the crystal growth habit from having no obvious orientation to having a preferential orientation along the (040) or (320) surfaces, as determined by the first-principles calculations and XRD analysis of block samples. Viscosity was the main environmental factor influencing the size of ACF in samples with sufficient liquid phase.

36 MATERIALS SCIENCE↗

Synthesis of boron suboxide (B{sub 6}O) with ball milled boron oxide (B{sub 2}O{sub 3}) under lower pressure and temperature

Boron reacted with ball milled boron oxide under pressures between 1 and 5 GPa and at temperatures between 1300 and 1700 {sup o}C to afford boron suboxide (B{sub 6}O). Icosahedral B{sub 6}O grains with diameters ranging from 100 nm to 1.3 {mu}m were prepared. The factors that affect the synthesis of B{sub 6}O are investigated. The best sample with crystal size up to 1.3 {mu}m is obtained at 2 GPa and 1400 {sup o}C for 6 h. The indentation experiment gave an average Vickers hardness of 32.3 GPa for bulk B{sub 6}O sample, which is consistent with previous reports. Bulk B{sub 6}O sample exhibits oxidation resistance in air up to 1000 {sup o}C and mild oxidation in the temperatures of 1000-1200 {sup o}C, which is more oxidation resistant than diamond. It is possible that B{sub 6}O could be used as a substitute for diamond in industry because of its relatively mild synthesis conditions, high thermal stability and high hardness. - Graphical abstract: Icosahedral B{sub 6}O grains were prepared for mixtures of boron and ball milled boron oxide at 2 GPa and 1400 {sup o}C, a milder synthesis condition in comparison with previous works.

36 MATERIALS SCIENCE↗

A spectroelectrochemical cell for ultrafast two-dimensional infrared spectroscopy

A spectroelectrochemical cell has been designed to combine electrochemistry and ultrafast two-dimensional infrared (2D-IR) spectroscopy, which is a powerful tool to extract structure and dynamics information on the femtosecond to picosecond time scale. Our design is based on a gold mirror with the dual role of performing electrochemistry and reflecting IR light. To provide the high optical surface quality required for laser spectroscopy, the gold surface is made by electron beam evaporation on a glass substrate. Electrochemical cycling facilitates in situ collection of ultrafast dynamics of redox-active molecules by means of 2D-IR. The IR beams are operated in reflection mode so that they travel twice through the sample, i.e., the signal size is doubled. This methodology is optimal for small sample volumes and successfully tested with the ferricyanide/ferrocyanide redox system of which the corresponding electrochemically induced 2D-IR difference spectrum is reported.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Measurement of Size-dependent Dynamic Shape Factors of Quartz Particles in Two Flow Regimes

Understanding and modeling the behavior of quartz dust particles, commonly found in the atmosphere, requires knowledge of many relevant particles properties, including particle shape. This study uses a single particle mass spectrometer, a differential mobility analyzer, and an aerosol particle mass analyzer to measure quartz aerosol particles mobility, aerodynamic, and volume equivalent diameters, mass, composition, effective density, and dynamic shape factor as a function of particle size, in both the free molecular and transition flow regimes. The results clearly demonstrate that dynamic shape factors can vary significantly as a function of particle size. For the quartz samples studied here, the dynamic shape factors increase with size, indicating that larger particles are significantly more aspherical than smaller particles. In addition, dynamic shape factors measured in the free-molecular (χv) and transition (χt) flow regimes can be significantly different, and these differences vary with the size of the quartz particles. For quartz, χv of small (d < 200 nm) particles is 1.25, while χv of larger particles (d ~ 440 nm) is 1.6, with a continuously increasing trend with particle size. In contrast χt, of small particles starts at 1.1 increasing slowly to 1.34 for 550 nm diameter particles. The multidimensional particle characterization approach used here goes beyond determination of average properties for each size, to provide additional information about how the particle dynamic shape factor may vary even for particles with the same mass and volume equivalent diameter.

Environmental Molecular Sciences Laboratory↗

Reduced model of high-Z impurity redeposition and erosion in tokamak divertor and its application to DIII-D experiments

A reduced model of high-Z impurities erosion and redeposition is presented to analyze net erosion of tungsten material in divertor attached plasma conditions measured in DIII-D experiments. This reduced model is tailored to quantify the redeposition and the net erosion on high-Z material samples of sufficiently small dimensions to be considered exposed to uniform plasma conditions. For those uniform plasma conditions, the spatial distribution of redeposited high-Z impurities is well approximated by an analytical distribution characterized by a few parameters. The fraction of high-Z impurity eroding and redepositing on a material sample is then obtained by integrating this distribution across the material sample. Here, the ratio of net erosion rates of tungsten measured experimentally from tungsten samples of different sizes exposed to the same attached plasma conditions are well reproduced with this reduced model. It is shown that uncertainties induced by radially non-uniform plasma conditions in experiments can be significantly reduced by exposing samples to high density divertor plasma. Several enhanced experimental setups are proposed to measure and compare net erosion rates from samples of various areas during a single plasma experiment.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Effects of aging time and temperature of Fe-1wt.%Cu on magnetic Barkhausen noise and FORC

Magnetic Barkhausen noise (MBN), hysteresis measurements, first order reversal curves (FORC), Vickers microhardness, and Transmission Electron Microscopy (TEM) analyses were performed on Fe-1wt.%Cu (Fe-Cu) samples isothermally aged at 700°C for 0.5 – 25 hours to obtain samples with different sized Cu precipitates and dislocation structures. Fe-Cu is used to simulate the thermal and irradiation-induced defects in copper-containing nuclear reactor materials such as cooling system pipes and pressure vessel materials. The sample series showed an initial increase followed by a decrease in hardness and coercivity with aging time, which is explained by Cu precipitates formation and growth as observed by TEM measurements. Further, the MBN envelope showed a continuous decrease in its magnitude and the appearance of a second peak with aging. Also, FORC diagrams showed multiple peaks whose intensity and location changed for different aging time. The changes in FORC diagrams are attributed to combined changes of the magnetic behavior due to Cu precipitate characteristics and dislocation structure. A second series of samples aged at 850°C, which is above the solid solution temperature of Fe-Cu, was studied to isolate the effects of dislocations. These samples showed a continuous decrease in MBN amplitude with aging time although the coercivity and hardness did not change significantly. The decrease of MBN amplitude and the appearance of the second MBN envelope peak are attributed to the changes in dislocation density and structure. This study shows that the effect of dislocations on MBN and FORC of Fe-Cu materials can vary significantly and should be considered in interpreting magnetic signatures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOES SIZE MATTER? THE UNDERLYING INTRINSIC SIZE DISTRIBUTION OF RADIO SOURCES AND IMPLICATIONS FOR UNIFICATION BY ORIENTATION

Unification by orientation is a ubiquitous concept in the study of active galactic nuclei. A gold standard of the orientation paradigm is the hypothesis that radio galaxies and radio-loud quasars are intrinsically the same, but are observed over different ranges of viewing angles. Historically, strong support for this model was provided by the projected sizes of radio structure in luminous radio galaxies, which were found to be significantly larger than those of quasars, as predicted due to simple geometric projection. Recently, this test of the simplest prediction of orientation-based models has been revisited with larger samples that cover wider ranges of fundamental properties-and no clear difference in projected sizes of radio structure is found. Cast solely in terms of viewing angle effects, these results provide convincing evidence that unification of these objects solely through orientation fails. However, it is possible that conflicting results regarding the role orientation plays in our view of radio sources simply result from insufficient sampling of their intrinsic size distribution. We test this possibility using Monte Carlo simulations constrained by real sample sizes and properties. We develop models for the real intrinsic size distribution of radio sources, simulate observations by randomly sampling intrinsic sizes and viewing angles, and analyze how likely each sample is to support or dispute unification by orientation. We find that, while it is possible to reconcile conflicting results purely within a simple, orientation-based framework, it is very unlikely. We analyze the effects that sample size, relative numbers of radio galaxies and quasars, the critical angle that separates the two subclasses, and the shape of the intrinsic size distribution have on this type of test.

79 ASTRONOMY AND ASTROPHYSICS↗

Synthesis and properties of (Yb, N)-TiO{sub 2} photocatalyst for degradation of methylene blue (MB) under visible light irradiation

Highlights: • The (Yb, N)-TiO{sub 2} nanoparticles were prepared and characterized. • The spectrum absorption region of (Yb, N)-TiO{sub 2} is red-shifted to visible light. • The recombination of the photo-generated electron–hole pairs of (Yb, N)-TiO{sub 2} is suppressed. • The photocatalytic activity of (Yb, N)-TiO{sub 2} is more higher than that of TiO{sub 2}-P25, N-TiO{sub 2} and the Yb-TiO{sub 2}. - Abstract: (Yb, N)-TiO{sub 2} photocatalyst has been synthesized by sol–gel method combined with microwave chemical synthesis. Also, the efficiency of the (Yb, N)-TiO{sub 2} as a photocatalyst for the degradation of methylene blue (MB) using visible light irradiation has been evaluated. The prepared samples were characterized by XRD, TEM, XPS, UV–vis-DRS and PL. The results show that the (Yb, N)-TiO{sub 2} photocatalyst has the anatase TiO{sub 2} crystalline phase. The TEM micrograph demonstrated that the average particle size of the sample was about 12 nm. The band-gap energy absorption edge shifted to longer wavelength as compared to commercial TiO{sub 2}-P25, N-TiO{sub 2} and the Yb-TiO{sub 2} prepared by our group. Results of degradation revealed that the (Yb, N)-TiO{sub 2} has shown much more higher photocatalytic activity than that of the TiO{sub 2}-P25, the N-TiO{sub 2} and the Yb-TiO{sub 2} under the visible light.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Synthesis of nanocrystalline forsterite (Mg{sub 2}SiO{sub 4}) powder by combined mechanical activation and thermal treatment

This study investigates the synthesis of single-phase nanocrystalline forsterite powder by mechanical activation with subsequent annealing. To produce forsterite powder, a mixture of talc and magnesium oxide powders was first milled by a planetary ball mill, and then annealed at 1000 and 1200 {sup o}C for 1 h. The synthesized powder was characterized by X-ray diffraction (XRD), simultaneous thermal analysis (STA), scanning electron microscopy (SEM), and atomic absorption spectrometry (AAS). The initial temperature of forsterite crystallization was reduced to about 825 {sup o}C after 20 h of mechanical activation. The forsterite powder synthesized by 5 h of mechanical activation with subsequent annealing at 1000 {sup o}C for 1 h had crystallites 40 nm in size. The particle size of this sample was less than 500 nm.

36 MATERIALS SCIENCE↗

Pre-Combustion Technique for Desulphurization of Waterberg Coalfield: Biological Treatment - 18444

The current study evaluates a microbial desulphurization of medium - sulphur type coal containing total sulphur (1.45 wt.%) and pyritic sulphur (≥ 0.51 wt. %) as a pre-combustion technique. Coal sample containing particle size in the range of - 0.85 mm was used in the experiments with bacteria isolated from nearby stockpiles of newly commissioned South African National Power Utility's (Eskom's) Medupi Power Station. After a stipulated hydraulic retention time (HRT), the coal samples were filtered, washed, dried and analyzed for total sulphur, ash content and calorific values. The calorific value of the coal significantly improved from 20.42 MJ/Kg to 24.16 MJ/Kg on the 5. day. The process removed up to 72% of the total sulphur content in the coal samples at a HRT of day 9. Furthermore, ash content reduced by 16%. This study provides a novel breakthrough of an alternative microbial desulphurization process of Waterberg steam coal as a further pre-treatment technique in order to meet stringent environmental emissions standards for SO{sub 2}. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Structural analysis of Sm{sup 3+} doped nanocrystalline Mg-Cd ferrites prepared by oxalate co-precipitation method

The structural properties of polycrystalline Sm{sup 3+} doped Mg{sub 1} {sub -} {sub x}Cd{sub x} Fe{sub 2}O{sub 4} (x = 0.0, 0.2, 0.4, 0.6, 0.8, 1.0) have been investigated by oxalate co-precipitation method from high purity sulphates. The samples were sintered at 1050 deg. C for a duration of 5 h. The X-ray diffraction measurements confirmed the formation of a cubic spinel structure. The different parameters like lattice constant, X-ray density, physical density, porosity, crystallite size, site radii and bond length on tetrahedral and octahedral sites have been calculated. The lattice constant increases with an increase in Cd{sup 2+} content and shows non linear behavior. The crystallite size was calculated using Scherrer formula and varies from 28.69 to 32.05 nm. Physical densities were obtained by Archimedes principle. The surface morphology studied by scanning electron microscope shows that the grain size of the samples increases with an increase in Cd{sup 2+} content. The IR spectra show two strong absorption bands around 5.87 x 10{sup 4} m{sup -1} and 4.27 x 10{sup 4} m{sup -1} on the tetrahedral and octahedral sites respectively. IR spectra also show that Sm{sup 3+} occupies the octahedral B-site.

36 MATERIALS SCIENCE↗

Nanoscale crystallographic characterization of nanoporous catalyst by TKD

To better understand the structure-reactivity relationships of self-supported nanoporous catalysts, a nanoscale characterization of the materials is required. Transmission Kikuchi Diffraction (TKD), or transmission electron backscatter diffraction (t-EBSD), is a recent technique used to analyze the grain crystallography and morphology of thin films and nanometer-scale materials. Using a conventional EBSD detector in a FIB-SEM instrument, we investigate nanoporous gold (npAu) samples with ligament size in the 50-70 nm range. Grains with diameters below 50 nm can be clearly resolved, but also welldefined grain boundaries extending over 3 to 4 pixels, proving the high resolution of the method. The presence of contaminations during sample preparation by FIB milling is also discussed. We conclude the results provide deeper insight than conventional EBSD technique can alone.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

4D-STEM of Beam-Sensitive Materials

We report that a scanning electron nanobeam diffraction, or 4D-STEM (four-dimensional scanning transmission electron microscopy), is a flexible and powerful approach to elucidate structure from "soft" materials that are challenging to image in the transmission electron microscope because their structure is easily damaged by the electron beam. In a 4D-STEM experiment, a converged electron beam is scanned across the sample, and a pixelated camera records a diffraction pattern at each scan position. This four-dimensional data set can be mined for various analyses, producing maps of local crystal orientation, structural distortions, crystallinity, or different structural classes. Holding the sample at cryogenic temperatures minimizes diffusion of radicals and the resulting damage and disorder caused by the electron beam. The total fluence of incident electrons can easily be controlled during 4D-STEM experiments by careful use of the beam blanker, steering of the localized electron dose, and by minimizing the fluence in the convergent beam thus minimizing beam damage. This technique can be applied to both organic and inorganic materials that are known to be beam-sensitive; they can be highly crystalline, semicrystalline, mixed phase, or amorphous. One common example is the case for many organic materials that have a π-π stacking of polymer chains or rings on the order of 3.4-4.2 Å separation. If these chains or rings are aligned in some regions, they will produce distinct diffraction spots (as would other crystalline spacings in this range), though they may be weak or diffuse for disordered or weakly scattering materials. We can reconstruct the orientation of the π-π stacking, the degree of π-π stacking in the sample, and the domain size of the aligned regions. This Account summarizes illumination conditions and experimental parameters for 4D-STEM experiments with the goal of producing images of structural features for materials that are beam-sensitive. We will discuss experimental parameters including sample cooling, probe size and shape, fluence, and cameras. 4D-STEM has been applied to a variety of materials, not only as an advanced technique for model systems, but as a technique for the beginning microscopist to answer materials science questions. It is noteworthy that the experimental data acquisition does not require an aberration-corrected TEM but can be produced on a variety of instruments with the right attention to experimental parameters.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗